Real quick issue: I have an ATT Atrix 4G rooted and unlocked, want to flash custom kernel, http://forum.xda-developers.com/showthread.php?t=1156040 However, I'm on gingerbread with a different kernel to the one that the forum thinks gingerbread should have. Is it safe to flash this different version kernel onto an older version (stock version)
Thanks
I just wanted to say that updating the kernel did not break it or anything, in case anyone else wondered....
Related
I've been searching the forums to see if there is a custom kernel that you can flash over the stock rom. My friend did this to his motorola droid so that he could overclock the processor, so I assume someone has developed a similar kernel for the hero. Is this possible/does this kernel exist? I am aware that there are custom roms that allow for overlocking, but all I really want is a custom kernel.
Pick any kernel you want as far as I understand it. Of course, make a Nandroid first, then flash the new kernel. If you have any major problems with it, you can just restore the Nandroid, which will return you back to the stock kernel. I am about to embark on this same journey myself tonight. I'm going to use this one here - http://forum.xda-developers.com/showthread.php?t=705074 . Good luck to you in your endeavors.
Hey guys... I am getting ready to flash the JI2 modem (to fix my gps issues from what I read), but I was also wanting to flash a custom kernel to speed my system up and get rid of lag. I was thinking about flashing this kernel ( http://forum.xda-developers.com/showthread.php?t=787410 ) but have read where it bricked some phones, others didn't have a problem. Does anyone have any suggestions as to what custom kernel would work with the JI2? I will also need it to be compatible with what I am running... please advise on what you have had success with!
Rooted Vibrant
2.2 Froyo
Axura 2.1 Final
Hey
I used to have a nice ROM installed with a kernel that allowed overclocking. I would run my shift at 1.5Ghz and was really happy. Then when Gingerbread was coming out, I decided to flash a Gingerbread ROM because I was just excited for 2.3
Now there were not kernels for Gingerbread ROMs at that time. So formatted/wiped everything from my device using Clockwork Recovery. Now here's where I have a few questions:
After I wiped the entire device, when my phone booted, it seemed to have 2.3 installed so I assumed that since there was an OTA update for Gingerbread, it must have gotten updated somehow. I want to find out whether I have a custom ROM with 2.3 installed or is it a regular Gingerbread stock ROM that's on my device?
I would like to find out what kind of ROM is installed on my device right now and do whatever it takes to be able to flash a kernel that allows overclocking, because going back to 800Mhz from 1500Mhz is just not doing it.
I would also really appreciate if someone gave me direct links to a custom ROM (since I understand at this time it is impossible to flash an overclocked kernel, since HTC has not released official Gingerbread source code yet) with a flashable kernel that's completely stable and allows overclocking to 1.5Ghz.
I really don't care about the whole Cynaogen Mod etc, because I use LauncherPro anyway and from what I understood when I was reading about Cyanogen Mod, it doesn't change THAT much other than adding a little bit more functionality and mainly focusing on changing the phone interface, which is completely irrelevant to me.
Thank you in advance.
sajmonides said:
Hey
I used to have a nice ROM installed with a kernel that allowed overclocking. I would run my shift at 1.5Ghz and was really happy. Then when Gingerbread was coming out, I decided to flash a Gingerbread ROM because I was just excited for 2.3
Now there were not kernels for Gingerbread ROMs at that time. So formatted/wiped everything from my device using Clockwork Recovery. Now here's where I have a few questions:
After I wiped the entire device, when my phone booted, it seemed to have 2.3 installed so I assumed that since there was an OTA update for Gingerbread, it must have gotten updated somehow. I want to find out whether I have a custom ROM with 2.3 installed or is it a regular Gingerbread stock ROM that's on my device?
I would like to find out what kind of ROM is installed on my device right now and do whatever it takes to be able to flash a kernel that allows overclocking, because going back to 800Mhz from 1500Mhz is just not doing it.
I would also really appreciate if someone gave me direct links to a custom ROM (since I understand at this time it is impossible to flash an overclocked kernel, since HTC has not released official Gingerbread source code yet) with a flashable kernel that's completely stable and allows overclocking to 1.5Ghz.
I really don't care about the whole Cynaogen Mod etc, because I use LauncherPro anyway and from what I understood when I was reading about Cyanogen Mod, it doesn't change THAT much other than adding a little bit more functionality and mainly focusing on changing the phone interface, which is completely irrelevant to me.
Thank you in advance.
Click to expand...
Click to collapse
If you just did a wipe and didn't flash anything, your still running the same ROM as you were before the wipe. If you go into setting > about phone > software information > more, this will tell you your current ROM (build version). If you would like to continue using Sense but want to overclock I would suggest MikShift 1.1, otherwise I would suggest the Shift Deck ROM. Both can be overclocked with several different kernels, just do a little reading through the dev section to see what best suites you.
Disregard, just typed what crump said but he beat me to it!
Hello XDA,
I recently acquired a Samsung Telus T959D Fascinate and have anxiously waiting for a ICS release.
In order to use ]teamhacksung's ICS Port for Galaxy S (BUILD 9) for my fascinate, I used >>This Thread<< to flash a i9000 kernel to use the ROM.
Now I am confused a bit. I've done some research on XDA and google, but for some reason can't get a straight answer on what to do in order to flash back a regular Samsung Fascinate ROM, such as CM7.1. I want to flash back, but I don't know which kernel to use because I am currently using the i9000 kernel.
I could flash one by Glitch and try CM7.1 from there, but I'm not sure what the voodoo lagfix option is and why it would brick my phone.
If any of you could recommend a kernel to flash to use regular Fascinate ROMs, and a kernel to use for i9000 ROMs, it would be greatly appreciated
Telus fascinate roms are not compatible with verizon fascinates and vice versa. I would use glitch v13 for telus and whatever aosp rom of your choice thats compatible. Search function is your best friend lol.
I'm sure there's a million other threads like this, but the Iconia development world moves too fast for me to keep up, and for those older threads to maintain relevance. So I'm wondering what the latest and greatest ROMs are for the Iconia A500, and better yet a good guide on how to get it going.
Here's what I have going on right now:
1. It's running stock ICS (4.0.3, image Acer_AV041_A500_RV05RC01_PA_CUS1) applied through the OTA update.
2. It is rooted.
3. It has stock recovery, stock everything besides being rooted.
I do have experience flashing ROMs on Androids, rooting, ClockWorkMod, ADB, etc. but I have never flashed anything on an Acer before. Ideally, I'd like to throw CWM on there and a (mostly stable) JellyBean ROM. Can anyone hook me up with some threads?
Thanks!
EDIT: You know, from the looks of it, that CUS1 kinda screams that something isn't stock. The only explanation I have is it changed when I rooted it.
In Developement section I noticed JB 4.2.1 beta3 is most current if your going on JB numbers (over 4.1.x) not all works (but is getting better each version), read thread
if you goto any JB ROM , it will based on another BASE... ACER A500 STOCK ROM only has gotten to 4.0.3 so far (NO JB)
A good MOD or addon, I like is "Google NOW by Civato MOD" it adds Google NOW to 4.0.3. (ICS)
Lightspeed 4.8 is a great ROM (older ICS 4.0.3 based) but nice how it is stripped of bloatware) and you can add OC kernel and have @ 1504 Mhz
Civato, has made a few ics 4.0.4 ICS roms with A700 mixed in, better screens, etc.
I Like sticking with STOCK Acer_AV041_A500_1.054.00_WW_GEN1. It's the most current STOCK version.
Then I strip out a lot of Bloatware, add in Civato's Google NOW mod. another MOD AD Blocker (etc\"hosts" file)
I tried JB on Another based ROM, couldn't get into it, I'd try 4.2.1 in few weeks when more is working.
*** MOST important to get onto ICS UNLOCKED Bootloader, and before that, GET CPUID before u do any other CHANGES
Hope this has been helpful.
So... Where do I start? What software should I use? Do I fix the bootloader first or flash CWM, or what?