Ok, my wife got an NC and at first she loved it, then the more she started messing around with it, the more she noticed it would freeze occasionally here and there. I suggested going the custom rom route and overclocking, but before I started the process wanted to make sure a couple of things.
1. After reading it seems like if you want to run a custom rom, it MUST be run from the sd card? Is this correct? Or is it possible to run it from the emmc?
2. After installing custom roms, will she still be able to access her library? Can she re-download the stuff she had previously? I'm not sure how all this works yet tbh, lol... (I would assume yes, but we all know what assuming does )
3. I saw something where people were install the custom rom to the sd, but still running the stock on the emmc, why?
Thanks in advance for all your help!
-Erik
burritoboy9984 said:
Ok, my wife got an NC and at first she loved it, then the more she started messing around with it, the more she noticed it would freeze occasionally here and there. I suggested going the custom rom route and overclocking, but before I started the process wanted to make sure a couple of things.
1. After reading it seems like if you want to run a custom rom, it MUST be run from the sd card? Is this correct? Or is it possible to run it from the emmc?
2. After installing custom roms, will she still be able to access her library? Can she re-download the stuff she had previously? I'm not sure how all this works yet tbh, lol... (I would assume yes, but we all know what assuming does )
3. I saw something where people were install the custom rom to the sd, but still running the stock on the emmc, why?
Thanks in advance for all your help!
-Erik
Click to expand...
Click to collapse
1. False, I would reccomend running from the eemc if you won't miss the stock ui
2. I do not know as after I opened up my nook I installed cm7 to my eemc hopefully someone else can help you here
3. Eh, some people like the stock reading experience I guess. You could run stock from a SD card if you still want to keep it around.
Sent from my NookColor using Tapatalk
burritoboy9984 said:
Ok, my wife got an NC and at first she loved it, then the more she started messing around with it, the more she noticed it would freeze occasionally here and there. I suggested going the custom rom route and overclocking, but before I started the process wanted to make sure a couple of things.
1. After reading it seems like if you want to run a custom rom, it MUST be run from the sd card? Is this correct? Or is it possible to run it from the emmc?
2. After installing custom roms, will she still be able to access her library? Can she re-download the stuff she had previously? I'm not sure how all this works yet tbh, lol... (I would assume yes, but we all know what assuming does )
3. I saw something where people were install the custom rom to the sd, but still running the stock on the emmc, why?
Thanks in advance for all your help!
-Erik
Click to expand...
Click to collapse
1.It's not necessary to run it in the emmc, but it is RECOMMENDED provided that you're willing to lose the STOCK ROM.
2.She can't access her library IF the custom ROM has been installed in the emmc, but if it was installed in the sd, she can. What she'll need to do is just boot the nook without the SD in it.
3.Yup. It's because theywant to retain being able to use the regular stock ROM, which of course has access to B&N's market for books and apps. But now, it's possible to install the stock ROM in the sd.
Ok, so if she wants access to her library she has to use the stock rom PERIOD, right? Any tips on making the stock rom freeze up less? Is it safe just rooting and overclocking the stock rom?
-Erik
burritoboy9984 said:
Ok, so if she wants access to her library she has to use the stock rom PERIOD, right? Any tips on making the stock rom freeze up less? Is it safe just rooting and overclocking the stock rom?
-Erik
Click to expand...
Click to collapse
YES. If the library's a MUST for her, then you can just root the stock rom (so you can install market apps) and flash dalingrin's kernel to overclock it (which would significantly speed up the nook and lessen freezes).
I am running CM7 from emmc and have access to all my Barnes and Noble books through the Nook app from market, if that is what you mean. There are a few children's books that may not work with the Nook app and I am given to understand some magazine subscriptions might be unavailable but it is not a problem for me.
Sent from my NookColor using Tapatalk
All yours questions have been answered by others so I just chip in my experience.
1. If you run CM7 off uSD card, using Nook App will be much better.
2. If you run CM7 from eMMC and want to use Nook App, you MUST have an external uSD card plugged in anyway. W/o the card, it won't work properly.
3. Even with the Nook app running, I believe you will lose some features that stock Froyo offered such audio book?
les02jen17 said:
YES. If the library's a MUST for her, then you can just root the stock rom (so you can install market apps) and flash dalingrin's kernel to overclock it (which would significantly speed up the nook and lessen freezes).
Click to expand...
Click to collapse
That is not correct. If her library is of the books that she has downloaded from B&N that library is always available. When she signs in with the Nook Android app the library will sync and she can re-download any book she previously purchased from B&N.
I recently installed CM7.1/n198 on an SD card (Sandisc 16G class 2) and have been happy wih everything except one thing.
I am unable to download the Nook App (2.7.2) from the market, which claims I am not installing from a compatible device.
Since this is a clean install (gapps -gb-20110613-signed), I dont believe there is a way to revert my Google Market back to the 'old version'.
How can I get Nook to run on my Nook? It seems counterintutive.
You could try clearing market app data. Settings->Aplications->Market->clear data.
If that doesn't work you'll need to probably change your dpi, theres a couple tutorials around the forum on how to get the market working, most of them just work for some time. Since the market isn't a 100% working with the NC you'll need to do the clear data steps from time to time.
byronczimmer said:
I recently installed CM7.1/n198 on an SD card (Sandisc 16G class 2) and have been happy wih everything except one thing.
I am unable to download the Nook App (2.7.2) from the market, which claims I am not installing from a compatible device.
Since this is a clean install (gapps -gb-20110613-signed), I dont believe there is a way to revert my Google Market back to the 'old version'.
How can I get Nook to run on my Nook? It seems counterintutive.
Click to expand...
Click to collapse
You still got a market update... you can revert to the older market as described by freezing/renaming/deleting marketupdater.apk and going into manage apps and uninstalling updates.
byronczimmer said:
I recently installed CM7.1/n198 on an SD card (Sandisc 16G class 2) and have been happy wih everything except one thing.
I am unable to download the Nook App (2.7.2) from the market, which claims I am not installing from a compatible device.
Since this is a clean install (gapps -gb-20110613-signed), I dont believe there is a way to revert my Google Market back to the 'old version'.
How can I get Nook to run on my Nook? It seems counterintutive.
Click to expand...
Click to collapse
As far as I am aware, the google apps package people are including with the nightly updates is still the old market. Yours may have later updated on its own...
Indeed Market DID update on its own, so reverting (a few times actually) did the trick eventually.
Do we know why the market claims the nook color cannot run the B&N Nook app?
byronczimmer said:
Indeed Market DID update on its own, so reverting (a few times actually) did the trick eventually.
Do we know why the market claims the nook color cannot run the B&N Nook app?
Click to expand...
Click to collapse
Long story. Just stick with the old market or move up to nightly 200 where the LCD density was resent to 160.
Ok, I've searched around for a solution for this and haven't found one that works yet. Any ideas would be greatly appreciated.
I've done the IMEI patch, removed and reinstalled the app both through manage apps and titanium, clearing cache beforehand both times. I cannot get the HBO Go app to run without FCing on me. I am running the latest Kang build of CM7. Any other thoughts? Thanks.
MadMikeSS said:
Ok, I've searched around for a solution for this and haven't found one that works yet. Any ideas would be greatly appreciated.
I've done the IMEI patch, removed and reinstalled the app both through manage apps and titanium, clearing cache beforehand both times. I cannot get the HBO Go app to run without FCing on me. I am running the latest Kang build of CM7. Any other thoughts? Thanks.
Click to expand...
Click to collapse
I'm running an unmodified install of CM7.2 RC0 Mirage, updated as of last night, and am not having any issues signing in to HBO Go. I'm even running at a screen density of 220.
Where exactly is it FCing? I know there were problems authenticating in the past. FWIW, my provider is Charter.
Are you running CM off of SD or eMMC? You could try creating a pristine SD boot and try it there to determine whether it's specific to your current configuration.
bobstro said:
I'm running an unmodified install of CM7.2 RC0 Mirage, updated as of last night, and am not having any issues signing in to HBO Go. I'm even running at a screen density of 220.
Where exactly is it FCing? I know there were problems authenticating in the past. FWIW, my provider is Charter.
Are you running CM off of SD or eMMC? You could try creating a pristine SD boot and try it there to determine whether it's specific to your current configuration.
Click to expand...
Click to collapse
I'm using the same CM7 build, sorry associate it with Kang... Anyway, It's FC'ing after the HBO Go screen disappears. I've used it in the past without a problem using a Verizon login. I've tried clearing the cache and I initially get the screen allowing me to select a provider but I can't go any further as it FC's when I try to select something.
I'm running off eMMC. I could reinstall my system but I don't really want to. If it really comes to it I will, but I have many other apps that run just fine. I also have the Max Go app which is the same app as HBO Go and it runs fine.
I was thinking of creating a test SD install just to see if a fresh install fixes it. No need to zap anything you're using today.
bobstro said:
I was thinking of creating a test SD install just to see if a fresh install fixes it. No need to zap anything you're using today.
Click to expand...
Click to collapse
I had a thought you might have meant that too. I'll give that a try tomorrow if I get a chance, I have a spare 8gb usd card I can flash.
Ok, so I wiped, installed fresh, restored my apps with titanium and reinstalled HBO Go after IMEI patch. Seems to be working fine now. It was time for a wipe anyway... Kind of annoying though. Thank god for Titanium Backup.
hey, I am new to the tablet world, I tried to search for this and look in the recent post and didnt really find the answer I was looking for....
So if I buy a new or refurbished Nook Color right now from B&N... will I be able to root it?!
this article is old... so I am not sure if this is the case?
any advice Please
WARNING - READ THIS FIRST: Barnes and Noble has introduced a new hardware revision which bricks your unit if you install their official 1.0.0 Firmware (A step needed to root). As of right now, Nooks with serial #s starting with 1003 (running firmware 1.5) cannot be rooted, and should NOT be attempted. See nookdevs New_Hardware_Revision for more details before you think of trying this!
Click to expand...
Click to collapse
from:
nooktalk.net/news/time-to-hack-root-your-nook
THANKS!
cant post the regular link yet
Just buy from eBay or Craigslist you'll find it cheaper n rootable
Sent from my NookColor using XDA Premium App
Well, where is the difference if I buy it new from eBay?! How is it more or less rootable...? If it is new it is new No matter where it comes from or?!
and 135$ for refurbished didn't seem bad... Or?!
Sent from my PC36100 using XDA App
First.... those may be Nooks and NOT Nook Colors... The newest firmware for Nook Color or Nook Tablets is 1.4.1 and you reference FW ver 1.5.
Also, I don't know of any NC's or NT's with serial numbers below 2000 first 4 digits.
Additionally, with the newer rooting tools available, you don't need to install anything prior to 1.4.1 to root them.
alexwick said:
[...] From:
nooktalk.net/news/time-to-hack-root-your-nook
Click to expand...
Click to collapse
At the very top of that article, it states:
Last Updated on Wednesday, 29 December 2010 12:54
You might find reading more recent articles a bit more revealing. A few things have happened since 2010.
I am aware the article is old... So short answer...
A new bought nook can be rooted?!?
Sent from my PC36100 using XDA App
Short answer, yes.
My base FW is 1.0.0. I'm running the 20120217 build of Mirage-Kang from eMMC.
I can't imagine how it could get much more rooted than this unless it would be to follow the directions to root it to the letter but if I did that then I wouldn't be much of an Asshole and I am a journeyman Asshole so there you have it.
Oh, and I don't feel terribly compelled to take it out of the case to look at the serial.
MISRy said:
Short answer, yes.
My base FW is 1.0.0. I'm running the 20120217 build of Mirage-Kang from eMMC.
I can't imagine how it could get much more rooted than this unless it would be to follow the directions to root it to the letter but if I did that then I wouldn't be much of an Asshole and I am a journeyman Asshole so there you have it.
Oh, and I don't feel terribly compelled to take it out of the case to look at the serial.
Click to expand...
Click to collapse
But do you have a Nook... or a Nook Color?
I mean yeah the Nook is rootable... but I didn't know a Mirage Kang was done for it.
Just ordered a refurbished nook color for 135$ hope will get it rooted fine... Which is the best thread for noobs here to get it rooted?!
Sent from my PC36100 using XDA App
alexwick said:
Just ordered a refurbished nook color for 135$ hope will get it rooted fine...
Click to expand...
Click to collapse
Since there is a manual nooter for the 1.4, there's no problem rooting it.
Which is the best thread for noobs here to get it rooted?!
Click to expand...
Click to collapse
Which rooting do you wish to do? If you want to run the stock B&N apps side by side with apps downloaded from the B&N market, then first register the refurbished system with B&N, then go to NC developer forum and look in "[NC][1.4.1] ManualNooter 5.02.19". That's a couple of minor version steps past the one I used, but it looked like its got it all pulled together from the three different sources of info I used last month.
I wanted to keep Nook Comics support in the stock ereader, so I opted for the manual nooter.
If you want to do a CM7/CM9/MIUI root, which installs alternate firmware for the system instead of modifying the existing firmware to allow Android market apps ... well then, I dunno, as after experimenting with a CM7 sd sidecard, I opted for the manual nooter approach. I'd look in the developer forum for the most recent thread with detailed install instructions for the firmware I wanted to install.
Pretty off topic, but this helped me when I needed to exchange a nook color that I had lost the box for. If you need your serial number, it is inside the flap that covers the micro SD slot.
There are other ways to find it, but if you are on the phone with support and a rooted nook, this is a useful thing.
I also just bought a refurb Nook Color. It is running 1.3.0 out of the box. I want to root it then install CM7. However I can't find any clear posts on how to. Either they are all for earlier FW or 1.4. Should I update to 1.4 before Nootering? If so which MNooter should I use? Or is it recommended to just Nooter 1.3? Again which Mnooter should I use for 1.3?
Thanks
BruceMcF said:
Since there is a manual nooter for the 1.4, there's no problem rooting it.
Which rooting do you wish to do? If you want to run the stock B&N apps side by side with apps downloaded from the B&N market, then first register the refurbished system with B&N, then go to NC developer forum and look in "[NC][1.4.1] ManualNooter 5.02.19". That's a couple of minor version steps past the one I used, but it looked like its got it all pulled together from the three different sources of info I used last month.
I wanted to keep Nook Comics support in the stock ereader, so I opted for the manual nooter.
If you want to do a CM7/CM9/MIUI root, which installs alternate firmware for the system instead of modifying the existing firmware to allow Android market apps ... well then, I dunno, as after experimenting with a CM7 sd sidecard, I opted for the manual nooter approach. I'd look in the developer forum for the most recent thread with detailed install instructions for the firmware I wanted to install.
Click to expand...
Click to collapse
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Optimus V Prime said:
I also just bought a refurb Nook Color. It is running 1.3.0 out of the box. I want to root it then install CM7. However I can't find any clear posts on how to. Either they are all for earlier FW or 1.4. Should I update to 1.4 before Nootering? If so which MNooter should I use? Or is it recommended to just Nooter 1.3? Again which Mnooter should I use for 1.3?
Click to expand...
Click to collapse
You do not need to root the B&N firmware before loading CM7. You do need to decide whether you want to run CM7 on internal eMMC or external SD. If you plan to install CM7 to eMMC, you will over-write the B&N firmware, so rooting it is pointless. Once you've decided that, we can point you in the right direction.
There are also guides here on rooting B&N firmware that you can locate with a bit of searching.
---------- Post added at 03:18 PM ---------- Previous post was at 03:14 PM ----------
alexwick said:
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Click to expand...
Click to collapse
Yes, you can.
alexwick said:
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Click to expand...
Click to collapse
Yes, as I said, that's the setup I was using when I decided I prefer a manual nooter. Among your choices, you can:
(1) Replace the stock firmware with an alternative, such as CM7
(2) Run CM7 off a booting SD card and run stock B&N from internal memory
(3) Root the stock B&N system and then load and run Android market apps alongside the B&N built-in and B&N store apps.
I wanted to keep the features of the 1.4.1 ereader, including Nook Comics support, so for me (1) was out, and I only needed a few apps from the Android Store, so I finally settled on (3) to avoid having to boot back and forth between the two systems. But first I did (2) to try things out and get an idea of whether I wanted to root the B&N firmware or replace it with something like CM7.
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Yes, as I said, that's the setup I was using when I decided I prefer a manual nooter. Among your choices, you can:
(1) Replace the stock firmware with an alternative, such as CM7
(2) Run CM7 off a booting SD card and run stock B&N from internal memory
(3) Root the stock B&N system and then load and run Android market apps alongside the B&N built-in and B&N store apps.
I wanted to keep the features of the 1.4.1 ereader, including Nook Comics support, so for me (1) was out, and I only needed a few apps from the Android Store, so I finally settled on (3) to avoid having to boot back and forth between the two systems. But first I did (2) to try things out and get an idea of whether I wanted to root the B&N firmware or replace it with something like CM7.
Click to expand...
Click to collapse
It think I wanna go for option 2&3, can I not root the B&N internal system and also run CM 7 from SD card?
Do I have to take the SD card in and out depending in which one i wanna boot!?
Also another question... The whole reason this rooting is done if I understand correctly is to have access to all the systems in the NC, where do I get the Apps from ? Do I still have to get them through the market? Or can I download them somewhere!?
Got a question... Git my nook today, and it seems to be lagging quite a bit sometimes... Is that normal? Sometimes tottaly unresponsive... Is this normal?!
Sent from my PC36100 using XDA App
alexwick said:
It think I wanna go for option 2&3, can I not root the B&N internal system and also run CM 7 from SD card?
Do I have to take the SD card in and out depending in which one i wanna boot!?
Click to expand...
Click to collapse
Taking the SD card in and out depending on which one I wanted to boot, then full power off and power on was the way I did it. Don't know if there's a better way, but never saw a better way mentioned.
You can indeed run CM7 from an SD card and root the B&N internal system. That would allow you to use Nook Tweaks in the CM7 side to, for example, run a keyboard off the USB port and overclock the chip ~ neither of which you can do with the stock kernel ~ and still have the use of the 1.4.1 ereader for Nook Comics or media-enhanced ebooks.
Get a main microSD card for the CM7 SD card install. Follow the CM7 SD card instructions to do the CM7 SD card install on the big card.
And then get another microSD card (2GB Class 4 is plenty) and follow the 1.4.1 manual nooter instructions to root the stock B&N kernel.
Also another question... The whole reason this rooting is done if I understand correctly is to have access to all the systems in the NC, where do I get the Apps from ? Do I still have to get them through the market? Or can I download them somewhere!?
Click to expand...
Click to collapse
If you follow the CM7 SD card install directions, you will have access to the full Android Market on that install. Same thing if you follow the 1.4.1 manual nooter instructions ~ you will have access to the Android Market via the Nook Color Application Manager, and if you want can put the Android Market on the B&N Home Screen.
Its best to have a gmail.com account already, for the Android market registration, so sign up for one of those before starting the process if you don't already have one. And from the Android Market, you can also install the other markets (Amazon, 1mobile, GetJar) if you prefer one of those.
alexwick said:
Got a question... Git my nook today, and it seems to be lagging quite a bit sometimes... Is that normal? Sometimes tottaly unresponsive... Is this normal?!
Click to expand...
Click to collapse
It can be laggy, especially if you have too much load on it. Sometimes I'm surprised at how many windows I have open in the stock browser. Turning it all the way off will shut down apps that you may have left unclosed, free up RAM, and its normally back to its normal self.
Mind, the gurus have Android apps that can be used to shut down individual apps, but the brute force approach seems to work for me.
thanks for the quick detailed reply...
for the LAGS, well I dont have hardly anything open... the only thing i installed and bought was from the market. Angry Birds... and it seems sometime it will not respond to the throwing of the bird, but just scale the screen... even to exit the game and after the game is closed it seems to not respond properly... having to tap a button 5 times until it responds... and than it works fine after a reboot... and than a couple hours later same thing in the game... ..
also it seems like internetpages like nick.com seem to load forever and are very laggy. I ahve a 10 MBIT Internet connectio over wifi, so that shouldnt be a problem....
To teh dual Systems...Do I also need a second 2GB card for the rooted internal stock system, or is that just for the installation of it!?
I actually do have a 16 GB and a 2 GB at home already...
"If you follow the CM7 SD card install directions, you will have access to the full Android Market on that install. Same thing if you follow the 1.4.1 manual nooter instructions ~ you will have access to the Android Market via the Nook Color Application Manager, and if you want can put the Android Market on the B&N Home Screen."
Click to expand...
Click to collapse
Well on my android phone... most of the apps are available I believe for free on the forums... is this similar here... or do I have to buy them!? BTW My phone is not rooted...
The System is some 1.3 version I received... will I need to update to 1.4 first!?
I also do already have a gmail account... its a german one though [email protected] but that should be fine ... It is the german GMAIL
Also linked the nook to th BN Store I believe...Is tehre any waay to check?!
Should I not be able to stream netflix... with the regular nook!?
ONCE AGAIN THANKS FOR YOUR TIME !!!!
alexwick said:
... also it seems like internetpages like nick.com seem to load forever and are very laggy. I ahve a 10 MBIT Internet connectio over wifi, so that shouldnt be a problem....
Click to expand...
Click to collapse
That's just the stock Android Browser and an 800MHz single core system with 512Mb RAM plowing through a site with all the bells and whistles and targetted at a PC. Try the Dolphin HD browser (its in the B&N store, and its free so no worry about having to re-download it from the Android market to your CM7 install) ... it has an option to hold off flash content until you actually want to run it that can really speed up some sites.
To teh dual Systems...Do I also need a second 2GB card for the rooted internal stock system, or is that just for the installation of it!?
I actually do have a 16 GB and a 2 GB at home already...
Click to expand...
Click to collapse
Installation ... you want a good sized card for the CM7 install, and reading and storing an image from a large card, then formatting it and writing the install card image, then saving the install card image, formatting, and restoring the CM7 install image is a royal pain.
Note that you probably want to keep the install card as a bootable recovery card. 1GB is enough to do the manual noot, but 2GB is enough to hold the recovery of the original stock B&N before you do the manual root. 4GB is even better, as it can hold a recovery of the stock B&N as well as a recovery of the system right after it is manually nooted, in case you do something later to get it messed up.
And you can get a 4GB Class 4 card for $5 with free shipping from Amazon ~ the new 32GB flash cards have pushed the price of the smaller ones way down ~ so to my mind that's worth it to be able to set aside a recovery card.
Well on my android phone... most of the apps are available I believe for free on the forums... is this similar here... or do I have to buy them!? BTW My phone is not rooted...
Click to expand...
Click to collapse
Yes. There are paid apps, but both the CM7 install or the manual nooter give full access to a wide range of free apps on the main Android Market, and allow you to install 1mobile, GetJar, or Amazon if you prefer any of those markets.
The System is some 1.3 version I received... will I need to update to 1.4 first!?
Click to expand...
Click to collapse
Not for the SD card install of CM7. Be sure to follow the instructions for making an SD card install on a 1.3 system.
You'll want to upgrade for a rooted stock B&N Kernel to 1.4.2, because its only 1.4 that has the updated ereader, Nook Color tailored Netflix app, likely B&N Store HuluPlus this Friday ... if you were replacing the stock Kernel, there's be no reason to update, and the installs for the 1.3 system are more mature ... but if you want to keep the B&N Kernel, upgrade to 1.4.2. before you lock it down from further OTA updates.
I also do already have a gmail account... its a german one though [email protected] but that should be fine ... It is the german GMAIL
Click to expand...
Click to collapse
I'd don't know from personal experience, but I've seen some warnings about it being best to have a gmail.com account. Just to be safe, I'd sign up for a gmail.com account and give your primary gmail account as the email account used to confirm that you are a real person. Save it in an "Accounts" folder in your main gmail if you are unlikely to use it for anything except the Android market.
Also linked the nook to th BN Store I believe...Is tehre any waay to check?!
Should I not be able to stream netflix... with the regular nook!?
ONCE AGAIN THANKS FOR YOUR TIME !!!!
Click to expand...
Click to collapse
Before you start working on the unit, go to the store (its on the navbar) search for apps and download a free app. Dolphin HD is a good one. If it downloads and installs, you are linked to the B&N store.
I was thinking of making a custom rooting script for CWM (probably wouldn't release it), and I mostly want it to have a very small footprint and still have it feel like an unmodified Nook. I've mostly been using CM7 from an SD and haven't dealt with the stock OS much, but lately I've been using it more and I just like the way it's set up for some reason. I rooted it last night, but quickly reverted back after finding most apps 'weren't compatible with my Nook,' surprisingly including Nook Tweaks (I'll admit I was in a bit of a rush and wanted to get back to reading my book, otherwise I probably would have experimented more ). I also found that the apps installed with the root didn't show up in the stock launcher, and I'm not sure if that can be changed, or if it's already like that and I just needed to install an app from the Play Store and it would show up. Oh, and is there a manual root tutorial for 1.4.2 I can base my script on? Otherwise I'm just going to pull some stuff from my script for the Nook Simple Touch and ManualNooter.
You can add non-B&N apps to the B&N home screen using Nook Color App Manager. ManualNooter is pretty lightweight, and would be a good starting point for rooting the NC. I ran B&N 1.4.2 for months using it, and it worked very much as you describe.
Thanks! Only one problem, the Play store won't let me install it for some reason just like Nook Tweaks... How would I fix that?
Edit: And magically, it works now and I can install anything. Huh.