Related
They have the same connection dont they? What about current, amperage and all that good stuff?
We can deduce from the fact that they both can charge on your pc USB slot that their individual chargers are of same polarity and COULD be interchangeable. A quick check on my collection of chargers that charge also on USB is: K-Jam 5v 1.0 amp max, Atom 5v 1.0amp max, Jabra 800 6v 205mAmp 8) Check with your razr charger and interchange the chargers at your own risk :lol:
Victor
NO NO NO NO NO NO NO NO NO
Don't do it, I had somebody who had been charging there Compact with a razr car charger and now it won't charge at all. There appears to be some difference somewhere. Don't even risk it.
It wasn't the fact that the car charger was for a RAZR, the problem was, it was probably a generic charger. I fried a brand new iPAQ with a car charger I bought on eBay. I learned my lesson...
The *OFFICIAL* Motorola RAZR charger is rated less than the Wizard. Both the RAZR and the Wizard can charge via the USB. Both have the same pin outs. If the RAZR charger were rated higher than the Wizard, you should be concerned.
I've been using a RAZR charger since I got my K-Jam in (when was the very first shipment?) and it charges fine every time.
The ratings on my Motorola V3 charger:
Input: 100v-240v ~ 50/60Hz 0.2A
Output: 5.0V - 550mA
If someone can explain how why the RAZR charger is bad on the Wizard, I'd love to know why.
In fact, Nokia sells two different chargers. On some phones, they come with a standard charger. But you can buy a "fast" charger for the phone and the only difference is a higher AMP rating. I used to work for Cingular and have seen personally the same phone ship with both chargers...
-Mc
for grins: http://en.wikipedia.org/wiki/Universal_Serial_Bus
Power supply
The USB connector provides a single nominally 5 volt wire from which connected USB devices may power themselves. In practice, delivered voltage can drop well below 5 V, to only slightly above 4 V. The compliance spec requires no more than 5.25 V anywhere and no less than 4.375 V at the worst case; a low-power function after a bus-powered hub. In typical situations the voltage is close to 5 V.
A given segment of the bus is specified to deliver up to 500 mA. This is often enough to power several devices, although this budget must be shared among all devices downstream of an unpowered hub. A bus-powered device may use as much of that power as allowed by the port it is plugged into.
Bus-powered hubs can continue to distribute the bus provided power to connected devices but the USB specification only allows for a single level of bus-powered devices from a bus-powered hub. This disallows connection of a bus-powered hub to another bus-powered hub. Many hubs include external power supplies which will power devices connected through them without taking power from the bus. Devices that need more than 500 mA must provide their own power.
Click to expand...
Click to collapse
The max that the USB port can put out is 500mA. The V3 charger is between the USB port and the official HTC charger.
USB: 500mA
RAZR Charger: 550mA
HTC: 1A
Don't buy a generic charger. Buy a name brand charger...
Also, for more details about the USB pinouts than one man can digest in one sitting, read that entire Wikipedia article. I did... wish I hadn't.
-Mc
the same discussion is going on over at hofo or ppcdubai, forgot which one, but thers several posts with "I know someone that...." or "my friend did..." and devices ended up being fried. well i'm telling you from first hand experience. about a year ago I bought a belkin razr car charger from walmart and i've been using it on my jam and now my k-jam and my battery and device aren't damaged. I don't know the rating on it but I suggest u check the rating of anything before u plug your device into it.
also that car charger didn't charge my sp3i, just to let ya'll know.
That discussion at HOFO was a question that *I* originally asked back in December. I just posted the same information over there about 5 mins ago.
Buying chargers for 4.99 on eBay will kill your device every time. I learned the hard way. If you buy a name brand product, your fine.
Specs says it's OK. Experience with a name brand charger (your belkin and my Motorola) says it's OK.
But like I said above, if someone can point out a hole in my logic, please tell me. I've been wrong before but I don't think I am on this one.
-Mc
Works for me...
Motorola branded AC charger, rated for 550mA current
Generic car charger for mini-USB, made in China eBay, no specs.
Both work fine with my Razr V3 and my Qtek 9100. Bit of a risk to use the car charger, but it's worked well with the Razr. Agree completely with McHale, your logic works fine. If your AC converter and DC power source are up to USB spec, you should in theory be able to charge both devices.
The unknowns are the custom circuitry the cheap converters use to "prevent" overcharging. Some have simple diode rectifiers, some have weak op amp current sinks, etc. Basically, some of these overcharge circuits don't work at all and you get a fried device. You get what you pay for, usually.
Hi
I have 2 phones - an O2 XDA Mini S (a K-Jam) and a Motorola Razr V3. I use the Motorola chargers, both wall charger and car charger, every day for both phones and have done so, without problems for months.
Shaun
nope, doesn't work. Simple as that.
I have both, I tried - used one at the office, the other (razr) bedside. The charge light comes on, then goes out in five seconds.
Every once in a while, it actually would charge... finally gave up and got rid of the razr charger.
Hi
It definitely works for me - I have actually never used the O2 charger; I use the Motorola wall charger at the weekends and the Motorola Blue Car charger every morning.
That is the only way I charge my O2 XDA Mini S - so it obviously works in my case!!
Regards
Shaun
I have been using my Razr charger (car and home) since I got my KJam a few months ago. I had a surge and my official charger was fried in a surge.
The only problem I have had was when I completely drained my battery (GPS software that prevented power down) I was not able to bring my KJam back to life with the RAZR or USB charger.
I connected my KJam to a friends official charger for a couple of minutes and it was fine.
I bought a new charger from Expansys, but I still use my RAZR chargers as well.
I don't understand the reasoning, but you can not charge the phone via the USB unless it is on. Since the RAZR charger is basically the exact same specs as a USB port, same rule applies.
If the battery is dead, there's no way to turn it on for it to work.
At least that's my uneducated guess.
But like I said, I've been using the RAZR charger since the end of December and have never had a single discharge or any other problems.
-Mc
Hello folks, I am very concerned with my HTC HD2 as it takes like over 4 hours to fully recharge the battery. I have got this HD2 from the market here on XDA and it works very good overall, except for this problem when recharging it. I thought it was the charger and I have tried many usb to wall chargers even the the iPhone's 4 one, but nothing has changed.
I have also tried several roms and kernels but nothing has changed on this side as well. I wiped everything and put back win mobile 6.5 T-mobile stock rom, but hey, no difference here too..
I am wondering if there might be something wrong with the phone itself or can it be the battery going in holiday???....
How can I figure this out???
I have downloaded Battery Doctor from the market and it says the battery is in good health, and I get up to 14 hours with a full charge with mytouch 4G rom and kernel rafpigna 1.7 cpu 1.3Ghz OC.
Is anyone else experiencing the same problem ??? do you guys have any suggests ???
This problem is driving me really crazy...
Get a new battery, mine only takes 2 hours when completely dead.
mattfmartin said:
Get a new battery, mine only takes 2 hours when completely dead.
Click to expand...
Click to collapse
You think is the battery?? but I get up to 14 hours of usage, I am not sure if its that good though, but I heard this phone is a sucky battery, and anyways why Battery doctor says the battery is in good health ??
Anyways I was thinking to get the battery extended 2300mah
How many hours does your battery last???
Are you using the original HD2 charger? I have tried many different chargers and they always charge at a different rate. It has to be that, not the battery.
secano said:
Are you using the original HD2 charger? I have tried many different chargers and they always charge at a different rate. It has to be that, not the battery.
Click to expand...
Click to collapse
Unfortunately it came with its original charger broken and I have never had the pleasure to try with it.. Anyways I am using a charger that has the same specs of the original one, which is the usb charger of the iPhone 4, and yea same result ...
I have downloaded currentwidget from the market and it gets less than 200mA of current in, when it usually should get around 400mA, sometimes the value goes down to 200mA as well, which makes me really wonder the problem might be the usb port of the phone .
Does a broken battery does that as well??
Segnale007 said:
Unfortunately it came with its original charger broken and I have never had the pleasure to try with it.. Anyways I am using a charger that has the same specs of the original one, which is the usb charger of the iPhone 4, and yea same result ...
I have downloaded currentwidget from the market and it gets less than 200mA of current in, when it usually should get around 400mA, sometimes the value goes down to 200mA as well, which makes me really wonder the problem might be the usb port of the phone .
Does a broken battery does that as well??
Click to expand...
Click to collapse
I think it has to do with the charger you're using . When I charge mine I usually see anything from 500+mA to 700+mA on my battery monitor widget depending on how much charge the battery has, and like Segnale007 said it usually takes about 2 hrs to fully charge.
Segnale007 said:
Unfortunately it came with its original charger broken and I have never had the pleasure to try with it.. Anyways I am using a charger that has the same specs of the original one, which is the usb charger of the iPhone 4, and yea same result ...
I have downloaded currentwidget from the market and it gets less than 200mA of current in, when it usually should get around 400mA, sometimes the value goes down to 200mA as well, which makes me really wonder the problem might be the usb port of the phone .
Does a broken battery does that as well??
Click to expand...
Click to collapse
I can't say it's the battery cause you say it lasts you 14 hours, usb port? maybe. Your battery is good for it to last that much (on averge usage of course). It's the different charger that you're using.
roloracer said:
I think it has to do with the charger you're using . When I charge mine I usually see anything from 500+mA to 700+mA on my battery monitor widget depending on how much charge the battery has, and like Segnale007 said it usually takes about 2 hrs to fully charge.
Click to expand...
Click to collapse
The charger I am using its the iphone 4 charger and just like the original one its a 100-240V ~ 0.2A 50-60HZ , which I have no idea about what it means, but I can guarantee u its the same ..
So, what charger do you suggest me to buy?? I wish it was everything except the phone ...
Segnale007 said:
The charger I am using its the iphone 4 charger and just like the original one its a 100-240V ~ 0.2A 50-60HZ , which I have no idea about what it means, but I can guarantee u its the same ..
So, what charger do you suggest me to buy?? I wish it was everything except the phone ...
Click to expand...
Click to collapse
That's your issue there, 0.2A (aka 200mA).
The UK HD2 charger for example, is 1A (aka 1000mA).
To work out the maximum time it should take to charge the battery:
(capacity x inefficiency factor) / charging current
(1230 x 1.15)/200 = 7 hours
(1230 x 1.15)/1000 = 1.4 hours
xaccers said:
That's your issue there, 0.2A (aka 200mA).
The UK HD2 charger for example, is 1A (aka 1000mA).
Click to expand...
Click to collapse
Oh gosh, so ur basically telling me its the charger I am using what is ****ing up with the slow charging ???
Can you please point me at a good one???
I am totally ignorant about electricity and stuff like that ...
That charger only delievers 0.2 A which is 200ma , you need at least a 500ma charger, mine is a 1 A ( 1000 ma ) and its quite normal to see a 700 ma rate while charging..
Sent from my HTC Desire HD using XDA App
Segnale007 said:
Oh gosh, so ur basically telling me its the charger I am using what is ****ing up with the slow charging ???
Can you please point me at a good one???
I am totally ignorant about electricity and stuff like that ...
Click to expand...
Click to collapse
Take a look on ebay or any local phone shop/online phone accessory shop.
You want a micro usb charger that has an output current of at least 500mA/0.5A
The original HTC ones are 1000mA.
Blackberry ones I've seen are 700mA so they're good enough.
200mA isn't a problem, it won't damage your battery, in fact it will live slightly longer as it's being put under less stress when charging, but don't use your phone while you're charging with it as you'll be drawing more current than the charger can supply.
So for instance, if you wanted a car charger so you could use the phone as a satnav and talk via bluetooth, you'd need a 1A charger to cope with the drain on the battery.
xaccers said:
Take a look on ebay or any local phone shop/online phone accessory shop.
You want a micro usb charger that has an output current of at least 500mA/0.5A
The original HTC ones are 1000mA.
Blackberry ones I've seen are 700mA so they're good enough.
200mA isn't a problem, it won't damage your battery, in fact it will live slightly longer as it's being put under less stress when charging, but don't use your phone while you're charging with it as you'll be drawing more current than the charger can supply.
So for instance, if you wanted a car charger so you could use the phone as a satnav and talk via bluetooth, you'd need a 1A charger to cope with the drain on the battery.
Click to expand...
Click to collapse
Alright thanks, will let you know
Segnale007 said:
You think is the battery?? but I get up to 14 hours of usage, I am not sure if its that good though, but I heard this phone is a sucky battery, and anyways why Battery doctor says the battery is in good health ??
Anyways I was thinking to get the battery extended 2300mah
How many hours does your battery last???
Click to expand...
Click to collapse
With very, very light use about 55 hrs. That's not extended.
Alright, my dad has managed to temporary fix its original charger and I can confirm there's nothing wrong with the battery and the phone itself. It gets beyond 800mA with the original charger and fully recharge the batter within an hour and half, which is great..
Ok now I have to find a compatible USB to wall charger with the same frequency.
Since its a T-Mobile US HD2 its original charger is american, and since I am in Italy I'd get an Italian standard wall charger. Does the Italian HD2 original wall charger has the same frequency of the american one??
Thanks
xaccers said:
Take a look on ebay or any local phone shop/online phone accessory shop.
You want a micro usb charger that has an output current of at least 500mA/0.5A
The original HTC ones are 1000mA.
Blackberry ones I've seen are 700mA so they're good enough.
200mA isn't a problem, it won't damage your battery, in fact it will live slightly longer as it's being put under less stress when charging, but don't use your phone while you're charging with it as you'll be drawing more current than the charger can supply.
So for instance, if you wanted a car charger so you could use the phone as a satnav and talk via bluetooth, you'd need a 1A charger to cope with the drain on the battery.
Click to expand...
Click to collapse
Couldn't said it better..
Sent from my HTC HD2 Gingerbread using XDA App
I have the same problem but with Htc touch 2(Mega)-I know that this isn't Mega forum but i couldn't find any solution there,so i write here my issue-.It takes too much to charge my Touch 2 (around 9-10 hours) with the AC power.On the charger its writen:Input:100-240~0.3A(0,3A)50-60Hz,Output: 5V-1.0A(1,0A)MAX.DO I have the same problem,I need to change the charger?Thank you!
My T-Mobile's battery recharced 3 ours. not 4 ours or more. My charger is original.is there any problem with my battery
Hi
Using today the phone @ 100% brightness with car charger connected and using Sygic / Copilot, I see that my device can't not even charge at the same time that I am using it, but maintain their % of battery. Even with the charger the phone drains battery.
WTF samsung, So i cant make a long travel without running out of battery?
Anyone more with this problem?
PS: My HD2, HD, TyTN2, etc doesn't have this problem with the same car charger, they even charge at the same time.
What's the rating on your charger? I had to swap mine out for a 1A one in order to cope with GPS use in the car. Haven't had a problem since then.
I suspect the one you're using is 750mA or even potentially 500.
I have just had the same problem. I knew i needed a higher amp charger but i thought i would give it a try. The one i used is 650mA, so that's definitely not large enough. The normal 'house' charger is 0.7A (700mA) so in theory that size or above should charge whilst the S2 is being used.
I have a 1200 mA usb adapter for car (a sony ericsson, very very slim one) and I have no issues. You need a decent amount of power for that phone so 650mA will not do, have at least 1000.
http://www.nextag.com/Sony-Ericsson-AN400-Compact-853915153/specs-html
Not sure if this is the exact model but I found it to be the best because it's slim and there is nothing sticking out of the car socket, has a lot of power and I can power any usb device with it.
padlad said:
I have just had the same problem. I knew i needed a higher amp charger but i thought i would give it a try. The one i used is 650mA, so that's definitely not large enough. The normal 'house' charger is 0.7A (700mA) so in theory that size or above should charge whilst the S2 is being used.
Click to expand...
Click to collapse
Yest but probably you hava a chinese charger. The rating on it is never near the real one.
oh, I see, crappy charger, ill change then thanks guys
TomTom recently released a high speed multi charger. I replaced my old car charger with this one as I had a similar slow charge problem. Never had a problem ever since. All my weapons are always fully loaded with enough power! Expensive though!
http://www.tomtom.com/en_gb/product...-cables/high-speed-multi-charger-9UUC.001.04/
If someone is using a cheap higher-powered mains adaptor without issue, could you please post a (UK) link? Also if anyone knows of a cheaper alternative to the £20 car charger that would be great too!
I had same problem.I bought Samsung charger and no problem after
Sent from my GT-I9100 using XDA App
2.1 Amp TomTom charger is way too much for this device. Samsung wall charger is only rated at 750mA, but someone even found out that in source level Samsung has limited the power current at only 650mA.
With 1 Amp (1000mA) top quality car charger, the phone lost charge while using Navigation on full brightness.
Very slow charging in general for this phone.
shawt said:
I had same problem.I bought Samsung charger and no problem after
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Same here
Mittaa said:
Same here
Click to expand...
Click to collapse
Can you provide a link? I'd like to get one
I bought mine on eBay for £6.Just search "genuine samsung car charger"
Sent from my GT-I9100 using XDA App
I bought today a Belking car charger of 2.1amps and suprise!, same problem battery drain.
Can be maybe the car? I doubt it, any idea?
http://www.belkin.com/IWCatProductPage.process?Product_Id=525940
When you have the car charger plugged into the phone go into Settings/About phone/Status & look at "Battery status"; it should tell you if the phone thinks it's plugged into a USB port (in which case the phone will draw only 450 mA) or an AC charger (from which the phone will draw 650 mA). These limits are built into the Samsung ROM, presumably to keep the phone cool and/or extend the battery's lifespan. They could be overridden (especially the AC charger current limit) in a custom ROM.
Absent a custom ROM, if the Status display says you're connected to a USB port, you could try a different charger, or connecting USB pins 2 & 3 (the two center pins on the USB A connector) together. That's how the phone decides if it's connected to a USB port or AC charger -- the low-resistance (less than 200 ohm) connection between the two USB data pins is the key. The spec calls for 200 ohms resistance between the data pins, but some of the low-end high current chargers I've seen just have a direct short.
If that doesn't work, or if the Status display says you're charging off AC, then try some of the other battery-life tricks documented here in the forums; they should reduce the device's draw from the battery, allowing the charger to do its job.
Wow, this is kind of disappointing i have to say. I have noticed the USB charging is incredibly slow. You can't ever rely on it, i think it would take close to 5 hrs to fully charge from USB, that's insane! By mains it's somewhere between 2 and 3, but that's still way too high.
I take it if you buy a higher-powered mains adaptor (not one for the car) then we'd definitely get the benefits of a faster charge? Can someone post a link to one they are using and know works faster that the stock one?
Cheers
I ll try ur tricks guyz.
for the time being this is my situation (and it sux):
-car charger 1A 5v
-slow chargin and hot device
-using navigator equals : phone burns, drains battery and in the worst scenario freezes
yesterday I received a call while phone plugged into car charger with navigator session. wot happened is phone freezed (screen didnt switch off) and I saw PROXIMITY SENSOR WAS RED!
shawt said:
I had same problem.I bought Samsung charger and no problem after
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
The first post got me worried for a while, but this info has put me back to ease. Pre-ordered the GS2 (India) and getting the original Samsung charger along as a freebie.
Yeah, i have simelar experience with the samsung s2 in my car.
Its eating the battery even when its plugged in and i think i have a good charger..
I found 1 solution.. I use now copilot, you can set different setting to disable the screen automatically when you drive a straigt forward for some kilometres, only when you need to turn it comes up again.
thats how i set it and it loads a little, but bad anyway.
Maybe thats what the + means in Super Amoled + (+batteryusage)
(•.•) said:
Maybe thats what the + means in Super Amoled + (+batteryusage)
Click to expand...
Click to collapse
nexus S didnt have such a problems. it's only around how samsung managed chipset.
I ll try to set cpu downclock while temperature goes over 40..
Any risk in using a different charger than the original samsung one to charge the sgs2?
I use a combination of blackberry charger at work, universal micro usb charger downstairs at home, universal car charger and official charger upstairs.
Any concerns with this?
I've been doing that for ages. I use the droid, SE x10 and iPhone chargers with no issue.
As always YMMV
I am using htc's charger which has a higher rating than samsung charger. No problem at all...
Sent from my GT-I9100 using Tapatalk
I use a Sony charger to charge my S2 , I have not even removed the Samsung one from the box , As long as you use a branded charger will be fine.
I've tried to use Nokia's 1200 mA charger, It did charge the phone but whenever i connected that charger the phone would slow down terribly. So, whatever you use, try to keep it around Samsung's charger's 700 mA.
Ive found that the standard charger is rubbish! I had my galaxy s 4 month and it broke, my wifes galaxy 3 did same and now i dont even bother with the one out the box, just use the usb cable and the adapter i got with my tab.
Sent from my SGS2 via XDA App
[email protected] said:
Ive found that the standard charger is rubbish! I had my galaxy s 4 month and it broke, my wifes galaxy 3 did same and now i dont even bother with the one out the box, just use the usb cable and the adapter i got with my tab.
Sent from my SGS2 via XDA App
Click to expand...
Click to collapse
Absolutely right...my phone is about 1 month old..and the official samsung charger is already broken..not charging anymore..i guess there is an internal wire breakage at the flexible point of the charger becoz when i shake the wire at that point it starts charging intermittently..
Sent from my GT-I9100 using Tapatalk
I use my Kindle charger any micro usb charger will be fine.
Sent from my GT-I9100 using XDA App
iznee said:
Absolutely right...my phone is about 1 month old..and the official samsung charger is already broken..not charging anymore..i guess there is an internal wire breakage at the flexible point of the charger becoz when i shake the wire at that point it starts charging intermittently..
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Same here. I tried all sorts to get it to work with no joy. I now have 3 duff samsung chargers that are potentially a fire hazard if left plugged in! Tempted to email samsung and raise this concern.
Sent from my SGS2 via XDA App
At home I use a Lenmar AC-to-USB 1A charger I picked up at Fry's for around $10; in the car I use a 1A Cygnett 12V-to-USB charger, also from Fry's. Both charge the device at least as well as the OEM AC charger; the car charger appears to charge the SGS2 even when I'm running CoPilot Live.
I use the iGO charge anywhere.
It's a tad pricey, but since the GS2 battery life isn't great (my only complaint on the phone), the charger is great for it since it has an internal battery that charges up when you put it in an outlet so you can charge the phone without needing an outlet. Great for in school or walking around, just put it in my bag and press the button and it charges.
I'm using my BlackBerry charger with no issues, I just do it for convenience as the charging time is the same as the standard charger.
Cheers for the replies, you have put my worried little mind at ease!
daz_2000 said:
Cheers for the replies, you have put my worried little mind at ease!
Click to expand...
Click to collapse
+1 .Just used the charger from a different brand and no bad feelings while using it
well, i just emailed samsung raising my concerns regarding the faulty chargers... see what they come back with....
Guys have you noticed any change in response when we plug in another charger?
I have been using the HTC charger, 200 mA (input), Output 5V --> 1A.
Whenever i connect my phone to charge and try to work on it, i see my screen lag terribly. Haven't tried it with the supplied charger though due to the low voltage that came with it.
I know i would be wrong, but wanted to check with the experts on this forum...
maddesire said:
Guys have you noticed any change in response when we plug in another charger?
I have been using the HTC charger, 200 mA (input), Output 5V --> 1A.
Whenever i connect my phone to charge and try to work on it, i see my screen lag terribly. Haven't tried it with the supplied charger though due to the low voltage that came with it.
I know i would be wrong, but wanted to check with the experts on this forum...
Click to expand...
Click to collapse
i am using the htc charger that came with the desire hd...no issues what so ever...screen response while charging is the same on or off the charger.
maddesire said:
Guys have you noticed any change in response when we plug in another charger?
I have been using the HTC charger, 200 mA (input), Output 5V --> 1A.
Whenever i connect my phone to charge and try to work on it, i see my screen lag terribly. Haven't tried it with the supplied charger though due to the low voltage that came with it.
I know i would be wrong, but wanted to check with the experts on this forum...
Click to expand...
Click to collapse
200ma is way low, less than half the 500 ma usb standard. Get a new charger. Most of the chargers you are going to see will be 500 ma I would go with double that.
Some (bad?) chargers will disable touchscreen
I have a couple of usb-chargers off ebay and they give some trouble.
When connected, the touchscreen will not work anymore.
This is mentioned in the manual btw.
Guess the SII is a little sensitive.
Yeah, ebay chargers are a crapshoot. Head to walmart or similar and read the power specs, get something that puts out 5v at 1A LPS. This will charge much faster than the often usb based standard 500 mA chargers and the battery will not be harmed at that charging level which is what many stock HTC chargers put out nowdays. Do not get anything less than 500mA, this is the usb standard and works but will be slower to charge. El Cheapo no name chargers on ebay and such may have the spec but may or may not actually put out the juice. You can usually tell this because the phone will have problems like the ones mentioned right here. The stock charger does not put out any special juice, juice is juice. If a charger puts out to spec the phone will work while charging.
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
I don-t know, but I think no.
I charged many time my note with htc charger and gs2 charger.
Ciao
peslap said:
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
Click to expand...
Click to collapse
I almosr never use the original charger. I use the charger that came with the bluetooth headset and everything is fine
It doesn't matter what kind of charger you have. The only thing you must look at is the voltage of the source (5V DC) and it must be a micro usb plug
peslap said:
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
Click to expand...
Click to collapse
im using my old htc hd2 charger as the samsung one seems to have packed up and isnt charging properly
The easiest way to charge your Note is of course via a USB>Micro USB cord plugged into a laptop or PC (where you are guaranteed the voltage is correct), however if you are using a generic or knock off wall wart charger than provides a micro USB connector there is some small chance that it will not charge your Note.. look for the charging icon and if its not charging, toss the charger and get another.
There is no specific risk to the device, provided that it (the charger) has a micro-usb intended for charging generic devices..its just that some modern portable devices have a stricter requirement (tighter tolerance) for charging voltage and simply will not charge outside that voltage range.. my BB9930 does exactly this..
peslap said:
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
Click to expand...
Click to collapse
Richy99 said:
im using my old htc hd2 charger as the samsung one seems to have packed up and isnt charging properly
Click to expand...
Click to collapse
I'm using an hd2 charger without problems
Inviato dal mio GT-N7000 usando Tapatalk
Since all micro/mini usb chargers have the same voltage, and vary only in the power output - the only problem you could face is slow charging, or no charging at all if the charger doesn't have enough juice. But it certainly won't harm the phone.
I'm using my old Nokia N900 charger without problems
I'm using an old HTC mains-to-USB and a Nokia microUSB cable...
My stock charger has a slight squeal, so I usually use the charger for my BB Curve 9300. Does totally fine.
My Note was purchased from expansys UK but shipped in from mainland Europe. As it was to be sold in the UK, expansys had to supply a UK adapter rather than an EU one ...I received an HTC adapter with my phone. At first, I was worried, but discovered that it works beautifully with my Note. Charges faster than generic Samsung chargers too! You should be fine using another standard charger
Sent from my HTC Flyer P512 using xda premium
For the first 3 weeks I was using a blackberry (original) Bold II charger.
I noticed charge time was too long. And maybe even battery life was shorter.
Im not 100% sure about the second statement but the first is confirmed.
When I started using the Note charger it was faster. Not super fast compared to iPhone or iPad but faster than using the Bold charger.
I never use my samy charger..Im using my DHD charger..no problem at all..
Sent from my GT-N7000 using XDA
Tested three microusb from my "old" htc hd2, two original nokia microusb, and a sony ericsson original microusb.
HTC and Nokia dont work. Can't charge and no data connection.... I only can charge and data connect with the samsung and the sony ericsson microusb cables. I cant understand!!!
(the nokia cable also cant work with hd2!!)
microusb is an standard???
HTC minijack stereo earphone dont work with samsung, also dont work the nokia earphone...
minijack stereo is an standard???
Regards.
peslap said:
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
Click to expand...
Click to collapse
Most modern USB chargers should be fine (I use my old iPhone charger for the Note, for example.) Watch the power output though - some tablet chargers are rated at 2A+ and that could overdrive your charging circuit and cause damage. If you make sure your charger is about 1A (and 5V, obviously) then you should be fine.
peslap said:
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
Click to expand...
Click to collapse
I use a nokia charger to charge mine!
Make sure it gives you 1A of output and you are fine!
emuX said:
Most modern USB chargers should be fine (I use my old iPhone charger for the Note, for example.) Watch the power output though - some tablet chargers are rated at 2A+ and that could overdrive your charging circuit and cause damage. If you make sure your charger is about 1A (and 5V, obviously) then you should be fine.
Click to expand...
Click to collapse
Well emuX said it all!
1A of output and 5V and you are fine!
Actually the charging current is limited by internal resistance of the battery, so the battery effectively "accepts" charge. Charging current is not "pushed" in by the charger...
obviously a charger from say a BB is likely to be current limited and so longer charging times would be expected, but an iPad charger will work fine.
emuX said:
Most modern USB chargers should be fine (I use my old iPhone charger for the Note, for example.) Watch the power output though - some tablet chargers are rated at 2A+ and that could overdrive your charging circuit and cause damage. If you make sure your charger is about 1A (and 5V, obviously) then you should be fine.
Click to expand...
Click to collapse
I am even using a charger meant for my old HTC hehe, powerful enough adapter
Sent from my Galaxy Nexus using xda premium
I wouldnt worry too much, I charge my note with my iPhone charger purely because the USB port faces a different way so I can actually fit it on my plug extensions without loseing 2 sockets.
Pretty much anything with an output of 5Vdc and a minimum of 1A will do just fine.