Database Users

Boot freeze

I've tried 3 different roms:
http://forum.xda-developers.com/showthread.php?t=926507
http://forum.xda-developers.com/showthread.php?t=1010498
http://forum.xda-developers.com/showthread.php?t=1010498
I have done everything as described in the instructions. Every time the bootscreen freeze. Coredroid was in boot loop. I have waited up to 1 hour and nothing happens. What is wrong?

I have exactly the same problem.. Tried three different ROMs with three different Radio's.

Partition layout?

Marvlesz said:
Partition layout?
Click to expand...
Click to collapse
No idea tbh, not experienced with NAND on HD2

henninghh990 said:
No idea tbh, not experienced with NAND on HD2
Click to expand...
Click to collapse
I've tried formating it with both 200 and 350MB as system partition.

sorry if this is a stupid question, but are you sure you've rooted it correctly?
I remeber having the same bootloop issue, when i went through the steps once again it worked..i think i just had missed something little...
are you using clk or magldr?

JimWest7997 said:
sorry if this is a stupid question, but are you sure you've rooted it correctly?
I remeber having the same bootloop issue, when i went through the steps once again it worked..i think i just had missed something little...
are you using clk or magldr?
Click to expand...
Click to collapse
I did the following:
Installed HSPL 2.08
Installed MAGLDR
Use the DAF.exe with MAGLDR on the phone
Then I went to AD Recovery and wipe full data and Dalvik
Then I installed ROM via SD card.

I did the following:
Ran task29.exe
Installed Radio Leo 2.15.50.14
Installed MAGLDR
DAF.exe
Then I installed ROM via SD card in CWM.

Im sorry but it sounds right, what you did. all i can advice you to try ist start ALL over, first by rooting (http://forum.xda-developers.com/showthread.php?t=833953)
and then just follow the instructions given on the coredroid download, they are very detailed and unless you miss a step by accident (which was what i did) it should work.
and dont forget to give the first boot some time, it may take up to 15 minutes (sometimes even longer) but dont worry its just the first one!
good luck, and if you try please post the results, hd2 has left me down woth a few rooms a couple of times but in the end it always worked, even if it took many reflashes!!

JimWest7997 said:
Im sorry but it sounds right, what you did. all i can advice you to try ist start ALL over, first by rooting (http://forum.xda-developers.com/showthread.php?t=833953)
and then just follow the instructions given on the coredroid download, they are very detailed and unless you miss a step by accident (which was what i did) it should work.
and dont forget to give the first boot some time, it may take up to 15 minutes (sometimes even longer) but dont worry its just the first one!
good luck, and if you try please post the results, hd2 has left me down woth a few rooms a couple of times but in the end it always worked, even if it took many reflashes!!
Click to expand...
Click to collapse
That link, it links to an app. How am I going to install the app when I cant boot Android?

I have tried task29 and hard reset without any luck.

Flash stock WM 6.5, then try again
Sent from my HD2 using xda premium

z3nful said:
Flash stock WM 6.5, then try again
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
tried it twice...

what's the cwm log say? From advanced options you can have it put recovery.log on your sdcard, or you can use adb when in cwm to check it.
Sent from my HD2 using xda premium

this might happen if you try to extract the rom and repackage in windows os...especially the kernel...
by any chance did u do this?

gdsbalaji said:
this might happen if you try to extract the rom and repackage in windows os...especially the kernel...
by any change did u do this?
Click to expand...
Click to collapse
did not repackage the rom.

May be bad blocks in memory....install rom thru cmr....Goto adv select report...mount SD...open the report file in notepad....u shouldn't see more than one bad block...else there is problem
Sent from my HTC HD2 using XDA App

freeze after data recovery using clockworkmode
I have a freeze problem with my wildfire, a little help would be appreciated.
I installed cyanogenmod 7 and everything was working fine untill I restord all data (for cotacts and apps) using clockworkmode. After data recovery the phone freezes on boot.
Can someone tell me if I did something wrong or a method to get pass the freeze?.
I downgraded back to stock ROM but I really want to use Cyanogenmod.

dotro said:
I have a freeze problem with my wildfire, a little help would be appreciated.
I installed cyanogenmod 7 and everything was working fine untill I restord all data (for cotacts and apps) using clockworkmode. After data recovery the phone freezes on boot.
Can someone tell me if I did something wrong or a method to get pass the freeze?.
I downgraded back to stock ROM but I really want to use Cyanogenmod.
Click to expand...
Click to collapse
you are aware this is the HD2 thread not the wildfire thread?
please check before posting in future

$20 to walk me through Android REinstall

I had someone install Android direct to the phone (NAND), and wipe out Windows altogether. I'm trying to reprogram because after working fine for 5 months, the signal goes in and (totally) out randomly.
Sooooo, I've got root, aMAGLDR V1.3, Kernel 2.6.32.15, and I'm running ROM Manager...but I don't know what the hell I'm doing, really. Oh, and I downloaded some ROMs to my microSD.
And there's a catch. My USB port is totally loose now, so we need to do this without plugging in.
Is it possible?
If I boot into aMAGLDR, and I choose
1. Boot WPH, I get: WPH not installed
2. Boot AD SD, I get: SD Kernal Open Failed
3. Boot AD NAND, starts my old crappy ROM
4, 5, and 6 are USB (non)options
7. AD Hardreset: Do you want to erase all data? No, I don't.
8. AD Recovery: Invalid boot image header
9 Tetris: Press Enter to start, and then it doesn't start, and then I get sad.
If someone walks me through this (here, pm, Skype, Google Talk, Facebook, phone, whatever) I'll Paypal ya $20. If a bunch of people post the right answer, I'll split it, but don't fight over it. This is meant to be a fun little challenge, and a way for me to learn a little.
So, the race is on. Or is it?

You got magdlr installe. Do you have the recovery installed too? that would be the next thing you would have to flash and not to need a cable. the rest is easy and dont need a cable but you do need your sdcard. Being that you havent stated whether your phone is a eu model or a us model I will take the chance and say its the us model, next question is do you plan to use a ext partition of the sdcard? If you are then you need tpartition the sdcard from the recovery partition (CWR) after you have then you can copy the rom of your choice to the sdcard on your computer, then insert the sdcard into the phone and then flash the rom. if you dont plan to use an ext card, then skip that step and just copy thre rom onto the sdcard, flash and reboot.
A loose usb means nothing as long as it work thats all that matters, plus if the usb is loose then you have a bigger problem, how do you plan to recharge the phone?

U have milion solutions on forum for ur problems but if u really need help pm me i will give u skype or gtalk and I will most likely solve that for you cause i played a lot with my HD2
Sent from my HTC HD2 using Tapatalk

I use an external charger to recharge the batteries.

Can't use rom manager with magldr, if you run it it will break the cwm instal, and I suspect you already did hence "8 ad recovery" not working.

Rom manager now works with magldr hd2. U can flash recovery. And in turn flash rom to nand.
send from my hd2 @ miui 1.12.2

showlyshah said:
Rom manager now works with magldr hd2. U can flash recovery. And in turn flash rom to nand.
send from my hd2 @ miui 1.12.2
Click to expand...
Click to collapse
Really?
Want to tell me how?

Okay, if you read post 3 of the guide in my signature you never have to plug up a usb.
Good luck
Sent from my Transformer TF101 using xda premium

It covers clk, recovery everything. No usb needed.
The only thing is once you boot into recovery go to mounts and format all that has a format option. After you format everything,power down remover sd card and transfer your rom onto it. Then power back on and boot into recovery again and flash rom, reboot and enjoy !
Sent from my Transformer TF101 using xda premium

Pm me if you need more help.
Sent from my Transformer TF101 using xda premium

Streetman said:
Really?
Want to tell me how?
Click to expand...
Click to collapse
Not only does this appear to be a rather rude response (don't know if that's what you intended) but this is also a rather pointless thread. There are countless guides on how to install NAND Android (my favourite being this one) and if you had done any research you would have known beforehand that ROM Manager and MAGLDR don't work well together. I really don't know what showlyshah means when he says that ROM Manager now supports MAGLDR because as far as I know it isn't true and there would be loads of threads about it.

It's not a rude at all. I've done tons of research on these forums.
The problem lies in the fact that those of us who are not programmers don't have a base level of knowledge that is assumed in these forums. Couple that with all the acronyms that are new to us, and it's a puzzle to figure this stuff out.
Every time I program a new device I say, AHHHH! That was sooooo easy...once I knew the steps. Until then, it's impossible.

Have u do it or not ?

Here's where I'm at. I followed that guide. THANK YOU so much-I hadn't seen that one before.
I tried to install a ROM after I installed clk, and got stuck in a loop. At least I'm gettting a different result.
I've started over, and I've got CLK on the phone now. Now, Which ROM should I install?
Thanks for your help.

Updated update.
The rom I tried to install is HyperDroid-CM7-Licking-Lobster-v5.6.0-cLK-signed
When I started my phone, it just goes back and forth between a screen with an "H" on a twirling cube, and that splashing into the Android dude...and splashing back. Left it for 45 minutes.
Now, clk says it installs, but when I start, I'm back to the Android/H loop.
Like I said, I need someone to walk me through this.

Reinstalled. Same loop. Trying the Nexus Rom.

If I try to boot through HBoot to NAND I get:
Normal boot ...
ERROR: Invalid boot image heador

R u using the correct model(EU or tmobile)?
Sent from my HTC HD2 using xda premium

I use it on Tmobile, so I'm assuming Tmobile version. How would I know?
Someone else originally programmed the Nexus 2.3.4 NAND Rom on it, but I don't know how he did it.

Streetman said:
I use it on Tmobile, so I'm assuming Tmobile version. How would I know?
Click to expand...
Click to collapse
t mobile USA cut their own deal with HTC, to make a hd2 with double internal rom and a little more ram. (And in teh process gave their customers a device with an insta-kill switch, which they no doubt regretted when thousands were returned bricked in teh first few months of release)
if your hd2 has red+green end+send keys, and says 't mobile' beneath the earpiece, its a 'tmous' (T MObile US) which is slightly different to teh rest of teh worlds hd2's.
If you have white keys,you have a regular hd2.

[Q] Slow/laggy/freezing Dandiest rom

I apologize if there actually is a thread explaining what I am talking about. But I have searched all over. And I just can not figure it out.
I have the Dandiest ROM
http://forum.xda-developers.com/showthread.php?t=881937
I am using v4.31.44.12
It's my first rom flash, everything went fine and all.
The problem is that everything goes much too slow. Booting isn't an issue. but Everything regarding apps and calls and such just goes really slow.
When I get called, I can pick up. but I can't hang up because the phone just freezes.
Every app I install (which always takes roughly 3-5 minutes per app, after download) I have to constantly wipe the screen to keep it awake, if the screen sleeps during install, the phone completely freezes and I have to pull out the battery.
I wonder what is causing this, and if anyone has/had this problem before on a different ROM?
I have ext4 on my SD, shared storage or whatever it is called.
I have read some stuff about speeding that up or something, but I don't understand it.
I'm thinking it has to do with that. I installed/done everything following tutorials, so I should've done everything right.

Basementnugget said:
I apologize if there actually is a thread explaining what I am talking about. But I have searched all over. And I just can not figure it out.
I have the Dandiest ROM
http://forum.xda-developers.com/showthread.php?t=881937
I am using v4.31.44.12
It's my first rom flash, everything went fine and all.
The problem is that everything goes much too slow. Booting isn't an issue. but Everything regarding apps and calls and such just goes really slow.
When I get called, I can pick up. but I can't hang up because the phone just freezes.
Every app I install (which always takes roughly 3-5 minutes per app, after download) I have to constantly wipe the screen to keep it awake, if the screen sleeps during install, the phone completely freezes and I have to pull out the battery.
I wonder what is causing this, and if anyone has/had this problem before on a different ROM?
I have ext4 on my SD, shared storage or whatever it is called.
I have read some stuff about speeding that up or something, but I don't understand it.
I'm thinking it has to do with that. I installed/done everything following tutorials, so I should've done everything right.
Click to expand...
Click to collapse
Have you dont the following ? its in his main post . it seems like what you are experiencing is common .
1.. DON'T expect it will work out of box.
2. DON'T expect it will be as light and fast as Gingerbread.
3. DON'T expect that some legacy problem will disappear
4. Reboot your phone at lease twice after flashing or installing, after 1st boot into setting screen, long press the right button to recall the boot menu, reboot. Can not use /Update_DL method to install app before 3rd reboot.
5. For this version, due to the base has been changed throughly, can not use previous data.img or ext4, remove existing data.img and set data_img=1 to let system generate one for you, or set format_ext4=1 to format your ext4 if you are using ext4
6. DON'T set any config for 1st installation except data_img=1(for data.img) or format_ext4=1(for ext4 user). if your have tmous phone, no need the config.txt.
7. For SD or magldr, if 1st installation failed, must delete the system.ext2 file under /Desire_DL to let system convert it again.
8. Use Windows notepad create a file named config.txt, save it under /Desire_DL, only need to put the necessary config inside it, say:
data_img=1
Click to expand...
Click to collapse

My advice go here http://android.hd2roms.com/ and pick a rom without issues like hyperdroid 5.8.0. Leave ICS alone for a while.
No offence intended to Dandiest but his last post was months ago

shanman-2 said:
My advice go here *Link* and pick a rom without issues like hyperdroid 5.8.0. Leave ICS alone for a while.
No offence intended to Dandiest but his last post was months ago
Click to expand...
Click to collapse
Thanks, It was my first rom I flashed, almost bricked my phone in the process, so I'm scared to flash again. haha.
elesbb said:
Have you dont the following ? its in his main post . it seems like what you are experiencing is common .
Click to expand...
Click to collapse
I'm not sure what I'm supposed to do.

Basementnugget said:
Thanks, It was my first rom I flashed, almost bricked my phone in the process, so I'm scared to flash again. haha.
I'm not sure what I'm supposed to do.
Click to expand...
Click to collapse
Read what I've quoted and follow . Like reboot a couple of times and such things as that . And this is an sd build correct ? From the link provided that's the impression I got .
Sent from my HTC HD2 using Tapatalk

elesbb said:
Read what I've quoted and follow . Like reboot a couple of times and such things as that . And this is an sd build correct ? From the link provided that's the impression I got .
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Oh, I'm sorry. I'm using NAND. I'm using the NAND version of the Dandiest.
Also, I've had this rom for like a month now.

There are plenty of guides out there, get the nand toolkit (it simplifies things a lot,thanks to ksubedi). Read the guides carefully !!
Have a look here...
http://forum.xda-developers.com/showthread.php?t=1402975
http://forum.xda-developers.com/showthread.php?t=929324
Best of luck.
By the way have you tried a factory reset.. if you can back up your apps and data this might solve your problem!!

Basementnugget said:
Oh, I'm sorry. I'm using NAND. I'm using the NAND version of the Dandiest.
Also, I've had this rom for like a month now.
Click to expand...
Click to collapse
Ohh well that changes a lot lol . was it laggy since day one ?

[Q] Any way to resize the system part, without a computer?

Hi,
I'm in the middle of the jungle literally and i only have my phone with me... I'm trying to install the evohd2 ics rom but my sys part is only 160mb...is their any way I can resize it without a computer....?
Thx

If you have cLK boot loader, you can.
Just wipe all via recovery.
Then boot to cLK by long pressing back button and power. You will find the option there.
BTW, this should have been posted in the General or Q&A section, not development.
Mods please relocate this thread.
Sent with love from me to you via HTC HD2

Sorry for posting in the wrong forum I don't have clk I have magldr.... I'm I out of luck?

Thread moved to proper forum.
Sent from my GT-I9300 using xda premium

zozew said:
Sorry for posting in the wrong forum I don't have clk I have magldr.... I'm I out of luck?
Click to expand...
Click to collapse
Yes, why do you prefer MAGLDR if you run android?

It's not that I prefer it its just that's what's on the phone.... Don't I need a computer to change to clk? Or am I totally off track?
My situation is this I have my tmob HTC hd2 with magldr, i'm in the middle of nowhere with just my phone I'm not programming noob but, I haven't been flashing my hd2 more than once... Actually twice i tried a pacman 4.1.2 rom as it only needed 145mb sys part, I'm actually running it now.... But it's lagging quite a bit no disrespect intended.... Probably my installation at fault... So I read that the evohd2 4.0.4 rom was supposed to be quite fast... But it needs at least 200mb syspart...
So if you say I can use clk to repartition, how can I get it on my phone without a computer just give me a link if you know where I should start looking.... I've Google and searched.... But all leads to the hd2 toolkit which I sadly can't use

there u r mate
the attached file is clk with touch recovery included.
rename the file with leoimg.nbh then put it on root of yr sd card and flash it
you dont need a pc to make repartition yr nand u can use it with inbuilt repartition option with this great tool
credit goes to the kokotas and their team.

You mean flash it like flashing a new power up splash screen? Volume down plus power button?

kslakhani said:
there u r mate
the attached file is clk with touch recovery included.
rename the file with leoimg.nbh then put it on root of yr sd card and flash it
you dont need a pc to make repartition yr nand u can use it with inbuilt repartition option with this great tool
credit goes to the kokotas and their team.
Click to expand...
Click to collapse
I did flash it and it took a few reboots because it got stuck on the recovery team splash screen...but finally it booted the touch recovery: ) i repartotioned the sys part and reflashed the pacman jelly bean rom just to try amd run it clean...and its not bad: )ill try it for a day now and see
Thx a bunch

sSo thought I'd just update...
I managed to wipe and clean all partitions and install the NexusHD2 ics rom and it's running like the wind only problem is that takes up to ten times to reboot to get it to load the touch recovery... So I got a little scared I'd bricked it.
. But it's ok now thanks a bunch

great u managed it in the middle of jungle right
actually clk is great tool. the only prob with clk is it doesnt support rmnet network it supports only ppp
hope soon devs gonna fix this
sorry i was away so late response
oh yes forgot to tell u clk recovery takes a while but let it be on very first boot its ok approx 10 mins(yeah i kno its too much)

[Q] How to get back app menu on Nexus Me v5 ROM

I dont know how but i removed the app menu option from the screen from my ga;axy y. I have installed the nexus Me v5 Rom in it. Can you please tell, how to get it back???
I know that factory restore is an option but i want to first look for any other option rather than reseting my phone
http://postimg.org/image/gwvzdbpgr/

I don't use that rom so the wording might be slightly different depending on its launcher
Long press on any blank area of the home screen
select add launcher action
Select add/close app drawer
long press on app draw image
drag it anywhere you want to put it

marcussmith2626 said:
I don't use that rom so the wording might be slightly different depending on its launcher
Long press on any blank area of the home screen
select add launcher action
Select add/close app drawer
long press on app draw image
drag it anywhere you want to put it
Click to expand...
Click to collapse
Thank You. It has worked. It was so simple & i was just panicking. Thanks

rom issue
aman95 said:
I dont know how but i removed the app menu option from the screen from my ga;axy y. I have installed the nexus Me v5 Rom in it. Can you please tell, how to get it back???
I know that factory restore is an option but i want to first look for any other option rather than reseting my phone
Click to expand...
Click to collapse
can you pls tell me how did you installed the rom? i have tried to install that rom with the provided kernel and rom links on the main thread, but im stuck in boot loop.
i think im not doint anything wrong, i have followed every step on the main thread.

Dont worry
davithdeathrider said:
can you pls tell me how did you installed the rom? i have tried to install that rom with the provided kernel and rom links on the main thread, but im stuck in boot loop.
i think im not doint anything wrong, i have followed every step on the main thread.
Click to expand...
Click to collapse
I was also facing the same problem. You are not installing the kernel properly. Download kernel from http://www.mediafire.com/download/s32dnj9g9g44h31/Percy_G2_CyanogenMod2_2+.zip
Then download ROM from either xda developers or from http://goo.im/devs/YashRastogi/Galaxy Y Android Development/NexFit/NexusFit_v0.1_CM7_YOUNG.zip
Copy all the files to your SD card. And then follow the following video. Please leave a thanks & tell me if it works. [first time booting takes time]
http://www.youtube.com/watch?v=erOUCOWND7o

aman95 said:
I was also facing the same problem. You are not installing the kernel properly. Download kernel from http://www.mediafire.com/download/s32dnj9g9g44h31/Percy_G2_CyanogenMod2_2+.zip
Then download ROM from either xda developers or from http://goo.im/devs/YashRastogi/Galaxy Y Android Development/NexFit/NexusFit_v0.1_CM7_YOUNG.zip
Copy all the files to your SD card. And then follow the following video. Please leave a thanks & tell me if it works. [first time booting takes time]
thats exactly the same tutorial i followed just after the xda tutorial didnt work for me, im still stuck on boot loop
---------- Post added at 01:44 PM ---------- Previous post was at 01:29 PM ----------
aman95 said:
I was also facing the same problem. You are not installing the kernel properly. Download kernel from http://www.mediafire.com/download/s32dnj9g9g44h31/Percy_G2_CyanogenMod2_2+.zip
Then download ROM from either xda developers or from http://goo.im/devs/YashRastogi/Galaxy Y Android Development/NexFit/NexusFit_v0.1_CM7_YOUNG.zip
Copy all the files to your SD card. And then follow the following video. Please leave a thanks & tell me if it works. [first time booting takes time]
http://www.youtube.com/watch?v=erOUCOWND7o
Click to expand...
Click to collapse
thats exactly the same tutorial i followed after the xda tutorial didnt work for me, im still stuck in boot loop
Click to expand...
Click to collapse