Hello, not sure if this the right place to post this. I need some help. I have a Milestone x mb809 on Alltel. A while back i changed my "Blurhome.apk & Framework-res.apk" to a custom ones and my original .bak files were on another drive, that drive got corrupted. I have looked for the last few weeks for the original files, but the ones i find do not have the same file names in side th .apk's i need to restore back to stock.
Here the files i need if it helps any
Code:
zz_moto_jog_tab_bar_down_begin.9
zz_moto_jog_tab_bar_down_end.9
zz_moto_jog_tab_bar_down_mute_begin.9
zz_moto_jog_tab_bar_down_vibe_begin.9
zz_moto_jog_tab_bar_left_begin.9
zz_moto_jog_tab_bar_left_end.9
zz_moto_jog_tab_bar_right_begin.9
zz_moto_jog_tab_bar_right_end.9
zz_moto_jog_tab_bar_right_mute_begin.9
zz_moto_jog_tab_bar_right_vibe_begin.9
zz_moto_jog_tab_bar_up_begin.9
zz_moto_jog_tab_bar_up_end.9
zz_moto_jog_tab_bar_vibrate_down_begin.9
zz_moto_jog_tab_bar_vibrate_right_begin.9
all_apps_button_focused
all_apps_button_normal
all_apps_button_pressed
home_left_btn_normal
home_left_btn_selected
home_right_btn_normal
home_right_btn_pressed
home_right_btn_selected
If i can get the original .apk's files that wold be awesome
Any help is appreciated. Thanks
kenny_man_00 said:
Hello, not sure if this the right place to post this. I need some help. I have a Milestone x mb809 on Alltel. A while back i changed my "Blur-res.apk & Framework-res.apk" to a custom ones and my original .bak files were on another drive, that drive got corrupted. I have looked for the last few weeks for the original files, but the ones i find do not have the same file names in side th .apk's i need to restore back to stock.
Here the files i need if it helps any
Code:
zz_moto_jog_tab_bar_down_begin.9
zz_moto_jog_tab_bar_down_end.9
zz_moto_jog_tab_bar_down_mute_begin.9
zz_moto_jog_tab_bar_down_vibe_begin.9
zz_moto_jog_tab_bar_left_begin.9
zz_moto_jog_tab_bar_left_end.9
zz_moto_jog_tab_bar_right_begin.9
zz_moto_jog_tab_bar_right_end.9
zz_moto_jog_tab_bar_right_mute_begin.9
zz_moto_jog_tab_bar_right_vibe_begin.9
zz_moto_jog_tab_bar_up_begin.9
zz_moto_jog_tab_bar_up_end.9
zz_moto_jog_tab_bar_vibrate_down_begin.9
zz_moto_jog_tab_bar_vibrate_right_begin.9
all_apps_button_focused
all_apps_button_normal
all_apps_button_pressed
home_left_btn_normal
home_left_btn_selected
home_right_btn_normal
home_right_btn_pressed
home_right_btn_selected
If i can get the original .apk's files that wold be awesome
Any help is appreciated. Thanks
Click to expand...
Click to collapse
froyo or GB? what ver?
i have 2.3.5 (MB809) i can pull those files tonight when i get off work if they will work.
I'm not sure if its GB or Froyo. I think its a Froyo, i think.
But here is the sys info
ssys ver
3.1.39
Platform
2.2
base
Bp_C_20.0600R
kenny_man_00 said:
I'm not sure if its GB or Froyo. I think its a Froyo, i think.
But here is the sys info
ssys ver
3.1.39
Platform
2.2
base
Bp_C_20.0600R
Click to expand...
Click to collapse
damn sorry bro i can't help you then, i am on gingerbread 2.3.5
try pulling them from a rom zip.
Ah crap. i have looked for rom files but ones i found didn't have the files i need.
But think you for trying to help me.
ill keep looking
I have a generic .sbf image at home.I'll try to dig out the files for you later. I've already had to pull it apart to get a pristine logwrapper so I could upgrade to Gingerbread.
Sent from my Milestone X using Tapatalk
jmgib said:
I have a generic .sbf image at home.I'll try to dig out the files for you later. I've already had to pull it apart to get a pristine logwrapper so I could upgrade to Gingerbread.
Sent from my Milestone X using Tapatalk
Click to expand...
Click to collapse
That's awesome i just realized that i put "Blur-res" really meant "Blurhome.apk"
Sorry about that.
Related
I know. This is the hero forum. But if anyone has a droid or knows someone with one maybe we can get a dump?
Forgot to, post the link
Http://alldroid.org/viewtopic.php?f=210&t=567
awesome! i'd expect you goons to have vanilla 2.0 ready for the mass sprint crowd by tomorrow right? lol isn't a dump all we'd need? pardon for my ignorance but what changes would be made to be compatible to the cdma hero?
Excellent! Now we just need a full rom dump (not just the /system folder which is all that's available right now).
flipzmode said:
Excellent! Now we just need a full rom dump (not just the /system folder which is all that's available right now).
Click to expand...
Click to collapse
+1
I could use those apk's to build a "fuller" AOSP... that is assuming data can be made to work.
Thats what I'm hoping for. So please everyone who has access to a droif, root it and get a dump for us. Please
I was excited for droid users to find out it had been rooted. Now I am really excited because I didn't even think of the benefits it would bring to us!
flipzmode said:
Excellent! Now we just need a full rom dump (not just the /system folder which is all that's available right now).
Click to expand...
Click to collapse
Request made @ AllDroid
http://alldroid.org/viewtopic.php?f=210&t=570
WhiteWidows said:
Request made @ AllDroid
http://alldroid.org/viewtopic.php?f=210&t=570
Click to expand...
Click to collapse
Sweet. Post back here if they provide it please. I can only watch so many forums. heh.
So let me get this straight, a full dump from the Droid will help us get 2.0? If so AWESOME! I have a friend who has one, I'm sure he'll be rooting tonight I can get a dump tomorrow if you don't get one sooner.
NCX001 said:
So let me get this straight, a full dump from the Droid will help us get 2.0? If so AWESOME! I have a friend who has one, I'm sure he'll be rooting tonight I can get a dump tomorrow if you don't get one sooner.
Click to expand...
Click to collapse
It's more of a theory than anything. But if we can get their rom booting on our phone then we have a much better chance of getting things working rather than the gsm version we've been hacking up to try and work.
If anyone has access to a rooted droid then let me know. Although it will be much better once they have access to nandroid because pulling these files while the phone is booted up doesn't always work.
flipzmode said:
It's more of a theory than anything. But if we can get their rom booting on our phone then we have a much better chance of getting things working rather than the gsm version we've been hacking up to try and work.
If anyone has access to a rooted droid then let me know. Although it will be much better once they have access to nandroid because pulling these files while the phone is booted up doesn't always work.
Click to expand...
Click to collapse
I don't think that's true.. our kernel/drivers are way different than theirs.. we will be about the exact same point that we are now, and there are full rips out of the droid now on alldroid.org
nelson8403 said:
I don't think that's true.. our kernel/drivers are way different than theirs.. we will be about the exact same point that we are now, and there are full rips out of the droid now on alldroid.org
Click to expand...
Click to collapse
I agree but it's a lot easier to make a trackball work, to make leds work, and to make wifi work rather than trying to make it work on a radio that it wasn't designed for.
The image that the guy posted on alldroid is corrupted. It won't unyaffs. And based on the file size I would say it's just a system dump anyways.
Thanks to whitewidow I was able to get my hands on the boot.img by copying it off of /dev/mtd. The build went smoothly however it reboots instantly after the HTC logo. It is never recognized by the debugger. So this is either caused by corruption from how we obtained the boot.img, or the architecture / processor are just too different to work on ours at all. I am not the type that can build kernels from scratch though so maybe someone out there better than me will get it soon.
flipzmode said:
I agree but it's a lot easier to make a trackball work, to make leds work, and to make wifi work rather than trying to make it work on a radio that it wasn't designed for.
The image that the guy posted on alldroid is corrupted. It won't unyaffs. And based on the file size I would say it's just a system dump anyways.
Thanks to whitewidow I was able to get my hands on the boot.img by copying it off of /dev/mtd. The build went smoothly however it reboots instantly after the HTC logo. It is never recognized by the debugger. So this is either caused by corruption from how we obtained the boot.img, or the architecture / processor are just too different to work on ours at all. I am not the type that can build kernels from scratch though so maybe someone out there better than me will get it soon.
Click to expand...
Click to collapse
I'm pretty sure stuff compiled for the OMAP arch. Droid is not going to work in our Qualcomm arch. Heroes. I tried using "chat-ril" executable from Droid on my Hero and that doesn't work at all. OMAP and MSM have their own kernel trees as well, so their kernel probably won't boot on the Hero.
It's OMAP alright.
You wont get any of the normal binaries to run.
You can however grab some apks from it.
There is a dump out already btw, has been for almost a month now.
There has been a system dump yes but we are talking about a full dump including the boot.img file.
Boot image contains nothing useful for our purposes.
If you absolutely have to have the boot image someone posted it over on alldroid.org.
is it possible to get the new lockscreen from newly updated droid as verizon has spreaded 2.01 update for droid? cheers
This is exactly the rom I need(unless there is some major problem that I need to be made aware of...). If anyone has this, could they please share?
Thank you oh so very much in advance!
NuNinja said:
This is exactly the rom I need(unless there is some major problem that I need to be made aware of...). If anyone has this, could they please share?
Thank you oh so very much in advance!
Click to expand...
Click to collapse
Liberated Eclair 2.1 is up to version R012. That's the one you should use.
I hate to be picky, but I tried R012 and it had more changes than I was looking for.
Stability and features that help provide 2.1 Eclair some flexibility is a bad thing? :S
NuNinja said:
I hate to be picky, but I tried R012 and it had more changes than I was looking for.
Click to expand...
Click to collapse
OK, so Liberated Eclair R003 was based on the original AT&T ROM, so why don't you just start with that and pull out all of the apps you don't want. You can get find the that ROM here:
http://forum.xda-developers.com/showthread.php?t=783508
You can simply unzip the ROM file, remove the *.apk files you don't want and then zip it back up and flash with ClockworkMod.
jeebuz said:
Stability and features that help provide 2.1 Eclair some flexibility is a bad thing? :S
Click to expand...
Click to collapse
Not a bad thing, just changes that I do not need.
tpbklake said:
OK, so Liberated Eclair R003 was based on the original AT&T ROM, so why don't you just start with that and pull out all of the apps you don't want. You can get find the that ROM here:
http://forum.xda-developers.com/showthread.php?t=783508
You can simply unzip the ROM file, remove the *.apk files you don't want and then zip it back up and flash with ClockworkMod.
Click to expand...
Click to collapse
I've already stripped the apps that I don't want. I am more interested in busybox, droidwall, and infrastructure mode in wireless tether.
Sorry if this has been asked but I have just ordered a Milestone 2 and i was wondering whether the Droid 2 ROMs would work on the Milestone 2. I know people say no but i remember reading in the D2G forums about a little patch you can implement to make D2 roms work on D2G - Isn't the hardware and drivers the same apart from the EVDO/CDMA part of the antennae?
Thanks, Jack
I tried to install a ROM designed to work on the D2G and I bricked my Milestone 2 so I advise you to not try it
I might have done something wrong but I won't test again as I had to restore my system with RSD Lite (and it's a pain in the a*s).
Well that sucks - wonder why it bricked it D:
I hope you did something wrong and it does work. I will just try when i get my phone.
If it doesn't i will either install ArgenROM or overclock to 2GHz
D2 custom roms mostly work, however the issue with those is that they do not initialise with the UMTS radio, instead they use CDMA. By "mostly", I mean "everything except for the phone part". All the difficult bits (wifi, GPS, camera etc etc) work perfectly. I've flashed the APEX rom to my phone without issue.
It's possible, when we can work it out, that we can force them to boot with the UMTS radio. When we've worked this out, we should be home free, thus giving us a few more roms to use =)
smacky_wolf said:
D2 custom roms mostly work, however the issue with those is that they do not initialise with the UMTS radio, instead they use CDMA. By "mostly", I mean "everything except for the phone part". All the difficult bits (wifi, GPS, camera etc etc) work perfectly. I've flashed the APEX rom to my phone without issue.
It's possible, when we can work it out, that we can force them to boot with the UMTS radio. When we've worked this out, we should be home free, thus giving us a few more roms to use =)
Click to expand...
Click to collapse
There is a file you can flash on the d2g to initialise the UMTS radio once a D2 rom is installed - I wonder if that would work?
What file?
Would you upload it? In a update.zip way?
Sent from my Milestone 2 XDA App
JackStoreytime said:
There is a file you can flash on the d2g to initialise the UMTS radio once a D2 rom is installed - I wonder if that would work?
Click to expand...
Click to collapse
If you can find it for me, I'm more than willing to try!
The "file" is called D2G romer tool. Yes, it is an update.zip which you install from clockwork recovery. It will NOT work on Milestone 2. However, the approach taken creating the romer tool can be used with Milestone 2 to create similar file based on Milestone 2.
Romer is far from perfect though. If you want to know more, google for Get~R~Done team, or go to droidforums.net and navigate to Droid2 Global section.
Sent from my DROID2 GLOBAL
leobg said:
The "file" is called D2G romer tool. Yes, it is an update.zip which you install from clockwork recovery. It will NOT work on Milestone 2. However, the approach taken creating the romer tool can be used with Milestone 2 to create similar file based on Milestone 2.
Click to expand...
Click to collapse
Thanks for that! Based on this info, I have an idea as to how I can make this work. Hell, I have another slightly dodgier thing to try that may also work :3
Will try tonight
smacky_wolf said:
Thanks for that! Based on this info, I have an idea as to how I can make this work. Hell, I have another slightly dodgier thing to try that may also work :3
Will try tonight
Click to expand...
Click to collapse
Lets hope we can get some ROMs a Flashin' on the MS2 then
I've downloaded that file. So by, let's say, replacing all files from that update.zip with files from the Milestone 2 Stock ROM, we would be able to create a "MS2 Romer"..?
There are quite some files to replace, but I think I might try it out this weekend!
w0ndersp00n said:
I've downloaded that file. So by, let's say, replacing all files from that update.zip with files from the Milestone 2 Stock ROM, we would be able to create a "MS2 Romer"..?
There are quite some files to replace, but I think I might try it out this weekend!
Click to expand...
Click to collapse
Lets see what we can do! Thanking btw
Hah! Messing around, I've managed to get a version of APEX to boot. However, in my messing I removed all the bits that make it APEX, but the rom does boot with the apex logo and the different key map, and the phone part works too..
Pretty sure I know what to modify to get this work... gonna mess some more :3
smacky_wolf said:
Hah! Messing around, I've managed to get a version of APEX to boot. However, in my messing I removed all the bits that make it APEX, but the rom does boot with the apex logo and the different key map, and the phone part works too..
Pretty sure I know what to modify to get this work... gonna mess some more :3
Click to expand...
Click to collapse
Well this is a start- just shows we are getting there
Also, The milestone's BL is blocked but devs just load the system files such as SenseUI or other ROMs without replacing kernels. With some tweaks would it be possible to port Sense 2.2/2.3 to the MS2? (I like blur but sense is good too and i tend to chop and change roms on my current phone)
Yay! Congratulation!
I see MM2 community raise. Now I don't have any arguments, I will buy MM2
JackStoreytime said:
With some tweaks would it be possible to port Sense 2.2/2.3 to the MS2? (I like blur but sense is good too and i tend to chop and change roms on my current phone)
Click to expand...
Click to collapse
Theoretically it's possible to bring across SENSE. Not sure how deeply it integrates, I don't know a lot about sense. Theoretically you could replace the bits of BLUR with Sense, dunno for sure yet. The fact that sense exists on non-sense devices makes me believe it's possible :3
But like someone said before, the camera probably wouldn't be working because of the integration of its libraries into the kernel
[email protected] said:
But like someone said before, the camera probably wouldn't be working because of the integration of its libraries into the kernel
Click to expand...
Click to collapse
If the camera itself is a part of sense, then sure. But otherwise, D2 roms have working camera on them on MS2.
smacky_wolf said:
If the camera itself is a part of sense, then sure. But otherwise, D2 roms have working camera on them on MS2.
Click to expand...
Click to collapse
They just use the moto client for the camera so it works so we could keep the moto camera?
Hey, try Apex Rom and youre gonna see it mostly works(except from, obviously, the signal)
Sent from my Milestone 2 XDA App
can I transform my droid2 a955 into a r2d2 version hardware exclusive, of course? I would like to have the device run like the r2d2 (themes, extras, etc.)
thanks
There is a system dump out there that would give you all the stuff the Droid 2 R2D2 had (minus the lock screen).
Or you could find the sbf file specific to the R2D2 Droid 2 (if it exists) and flash it. That would give you the lock screen, which the other way doesn't.
any idea where it is?
I see bits and pieces of it everywhere, but don't know where the full dump is. Give me a bit, I have an idea.
Edit: Scratch that. I thought I had the dump, but I can't find it anywhere. Google search for it. You can find the wallpaper (live and static), the sounds, the boot animation, and the apps/widgets. The lock screen is a bit harder to find.
I used my TBH app and it says it has the R2D2 Froyo 2.2 - flashed it but it didn't do anything
It probably just had the version of Froyo that the R2D2 droid had, but not the theme/content that came with it.
Don't know what else to tell you. If I could have found my copy of the dump, I would have uploaded you. Sorry.
This is old but it could work for you:
http://www.droidforums.net/forum/dr...tars-wars-no-star-wars-clean-super-clean.html
JDunc said:
This is old but it could work for you:
http://www.droidforums.net/forum/dr...tars-wars-no-star-wars-clean-super-clean.html
Click to expand...
Click to collapse
I saw that too. I wasn't sure how good it was and wasn't sure if he wanted to ROM or just theme his D2. That's why I didn't mention it.
thanks - great find - I downloaded the ROM (Full) to my SD, rebooted into Bootstrap and wiped - installed the full Star Wars ROM but it just brought the D2 back to stock 2.3.2 - weird - didnt change a thing - did I do something wrong?
nevermind - think i got it - all except the boot aniumation whcih i have in a sepewrate zip...thanks!
Congrats! Hope you enjoy it.
Mind sharing it with the rest of us?
Much thanks and appreciations will be given.
Hi all. Need some help. I need a file found in the original .sbf for the bravo. It's supposed to be in the system/etc folder and is something like cameriaCalFileKob3M.bin or any files that say camera and are a .bin. I'm sooo close but I don't have this one file. (Kids might have deleted it?)
*****Update*****
Flashing back to original stock 2.2.1 to extract some files outta it. Yes guys I did a nandriod backup before hand. It's just painfully slow when you have XP with only 256mb of ram and a 2.1 Ghz Intel P4m. Hey $100 was a really good deal for a laptop that sat on a shelf for 9 years.
*****Update*****
Ok. Almost have camera working fully! Copied some files from stock system and put them into CM7 in same place. Camera is stable and can see preview and snaps a pic but then no picture goes anywhere. Found files were in system/etc and system/framework. two .bin and on a track with a couple of .jar in system/framework. Anyone else tried this please post or pm me. Man I did a dumba$$. Forgot to do a nandroid backup while stock. I must be tired or something.
I really need someone to teach me how to use SDK and make a AVD that is the bravo running it's stock 2.2.1 .sbf. Any takers?
Junkyardjames87 said:
I really need someone to teach me how to use SDK and make a AVD that is the bravo running it's stock 2.2.1 .sbf. Any takers?
Click to expand...
Click to collapse
I wish I could help you.
There must be somebody here who knows how to use it.
Lets talk to BravoMotorola, maybe he has worked with that!
Im here to try anything!! Just let me know!
Lets make this the official thread for Working/Modding Photo Camera.
Let me tell you about the source code first:
http://sourceforge.net/projects/bravo.motorola/files/BRAVO ATT/
Get it there.
Once I deodexed a rom but I lost some of the apps to do it, I'll try to do it.
but BravoX RC2 (Froyo) rom is deodexed:
http://forum.xda-developers.com/showthread.php?t=1065767
I think that could help you, thanks for being working on it.
Im always here