Hi!
It's been a while when I flashed my Blade with Swedish Spring and now when I'm trying update to Elite S2, the Clockwork seems to freeze with everything I'm trying to do with it.
First I tried with the old one I had already installed -> Factory reset, nothing happens, only the orange arrow with hat pops on to the screen and about half hour later it was still the same.
Same thing happens when I'm trying to go and select zip, only the arrow comes to screen, nothing happens after that.
And even when I'm trying to reboot or turn my phone off, the arrow shows up but nothing happens. Removing the battery and turning my device on again and my old rom (SS) works like it should and every app are still on their places.
Same thing happens with the newest Clockwork which I updated today, only the color of the clockwork-menu changed from orange to blue, but not the color of the arrow.
I'm not sure should I try straight flash the new rom with Rom Manager? I'm scared that it might brick my device becouse isn't Rom Manager based on Clockwork, so if the old fashioned-way doesn't work, the Rom Manager won't either?
If you got any ideas, please share them. I'm eager to try Android 2.3
Related
I brick my wife phone I installed 2.2 that was fine then I add one of those 2.2 themes after it rebooted it is stuck right after the vibrant theme disappears, I tried every single way but still can't get into the download screen.
after I pull up the cmd screen what do I do next.
Reflash your rom from cwm it well start you all over again but you won't be bootlooping anymore
V5 custom vibrant
I'll love to but it freezes after the virbrant logo.
Turn off the phone then hold power and volume keys when the samsung screen comes up twice let go of the buttons this should take you to clowork recovery then go to reinstall packages if it goes back to the same screen select reinstall packages again then select choose zip from sd then navigate to where your rom is select that and you should be good to go
V5 custom vibrant
drew2jr said:
I brick my wife phone I installed 2.2 that was fine then I add one of those 2.2 themes after it rebooted it is stuck right after the vibrant theme disappears, I tried every single way but still can't get into the download screen.
after I pull up the cmd screen what do I do next.
Click to expand...
Click to collapse
to get it into the download screen, take out your battery, sim card, and microSD. plug your phone into your computer's usb. hold the volume up and volume down buttons while putting the battery back in, and you should see an android digging with "downloading..." underneath. after that, you can re-flash your phone. good luck!
Nothing is working I tried everything.
drew2jr said:
Nothing is working I tried everything.
Click to expand...
Click to collapse
Try going to http://forum.xda-developers.com/showthread.php?t=848737
i don't know much cause im new to android phones. that thread is dedicated to helping people fix their bricked vibrant. try asking him instead, he worked wonders with my phone =P
Thanks for all the help guys I got it fixed, I went to captivate site and someone there showed me how to get into the Adb and that's what work so again THANKS for all the help.
Alright well I've just recently rooted my Shift an am experiencing a bit of a problem...
All was well, I created a backup of the current (stock) ROM, went into recovery, saw it there. I tried to load it, said it was a success, but when I went to reboot the phone it shows the HTC white screen, blinks off, shows it again and goes back into recovery. I've tried creating an alternate backup and whne rebooting with that it just shows the white HTC screen and stays on it. Any help would be appreciated.
Avivator said:
Alright well I've just recently rooted my Shift an am experiencing a bit of a problem...
All was well, I created a backup of the current (stock) ROM, went into recovery, saw it there. I tried to load it, said it was a success, but when I went to reboot the phone it shows the HTC white screen, blinks off, shows it again and goes back into recovery. I've tried creating an alternate backup and whne rebooting with that it just shows the white HTC screen and stays on it. Any help would be appreciated.
Click to expand...
Click to collapse
Did you download the clockwork from rom manager?
If not, then most likely you'll HAVE to flash a new rom now. Though there are stock roms available. And an RUU if necessary.
Sent from my HTC Speedy (Gonzalez)
Yes, I did.
Ive been trying to flash MAG and what not so i could flash droid. Aanyways the first time i tried to flash mag and hspl it would get stuck at the tmobile screen, then i reflashed stock and tried it again, same thing happened. so i reflashed back to stock again. Now i installed hspl again, and this morning when i tried to flash mag, it didn't fully responde.
I connected via activesync, ran the ruu. it recognized the phone, rebooted it to the tri color screen, then the program shows status bar for flash, my HD2 shows the status bar, but Neither of them move from 0%.
the phone powers on and im able to use it, but it wont communicate with my computer once it hits that status bar.
Any idea?
hopefully it can be fixed
No one wants to chime in?
Nevermind, don't know what happened over night, but just got android nand done...
hehe, see? no need for any responses! and doesnt it feel better to fix it yourself?? evening flashing is dangerous, ive pulled the usb, pulled the battery, flashed the wrong roms, allsorts, late at night.
oh no, it'd be great if infact i did fix it myself... but it fixed itself over night, so im out ruled on that one.... it hates me.
Hi guys,
I recently tried to flash a rom on my phone and when the process was done, all I got was a black screen.
Fastboot still works and I can flash euro roms like on the tutorias fine but the phone simply wont boot.
I can go into emergency mode to flash in it in KDZ, the flashing works fine but still, the phone only displays a black screen.
When I press the power button it vibrates, the PC recognizes the device fine, so I know the phone isnt bricked, I just cant get it to display anything on the screen! please help!
Which rom did you try ?
Using swiftdroid RC4 2.0, but I found out what the problem was. Since on flashboot factory reset was in German, "reset und wipe" or something like that, I did not check it. Reflashed it and it is now working, the only problem is taht tehre are no boot animations whatsoever. only a black screen between pressing the button and going into android. any fix for that?
thank you for the replies!
EDIT: Also, by going into reboot > Recovery, nothing is displayed. this only happens on boot. I flashed originally with Euro+fast.kdz, and that is when this problem begun.
Flash this boot.img
and for the recovery, ace you installed??
I installed CWM for recovery, if that is what you asked.
Going to try to flash it and let you know, hope it does break anything
EDIT: nothing. No boot images. Going to leave it alone until I need it for something. I use an X10 mini, I just bought this phone for testing. Not liking the resistive screen!
you tried to flash an X10 with Rc4 ?
No, I have an X10 which is my default phone, I boght this optimus for testing, I flashed RC4 on the optimus, not the mini. not that stupid
You're not the only one with this problem, this will fix it.
http://forum.xda-developers.com/showpost.php?p=10238074&postcount=41
Did you tried with another ROM ?
Yep, follow this... since I can't post links, I can't help......
Hello, well it seems I may have messed up my nook and I wanted to get some help. I have had one sitting in a dresser for awhile since I got my tablet and a friend wanted it so I got it out last night to make sure it was up to date with everything.
Now it had some old build of phire on it and when I went to try and flash a new copy onto it, the thing goes to the logo and then to a black screen. Now I know it's on cause the backlight is on but it just sits at a black screen. Also when I try to hold the volume up or down with the power button to reboot and try to get into clockwork doesn't work and I am not even sure it has CW on it. I was lazy and told that rom manager to do all the work, first time I ever let the thing do anything for me.
So right now that is where I am at, and would like to know what I did and how to fix it? Also what is the newest stable rom for a nook?
On mine you use the n button + power to get to recovery. I tried letting Rom Manager do it once and like you, it failed. IMO the MiRaGe rom is best.