Installation Instructions
flash it like a rom, don't wipe
Please do a backup before trying these kernels. Even if it works fine for me doesn't mean it works for everyone.
Max 1.8Ghz overclock
add smartass2 governor
add BFQ IO
add TUN/CIFS/SWAP/ZRAM
add EXT4 fs
Thanks Dzo's Help, some fix from dzo
ONLY for offical Gingerbread
maybe the oversea's ramdisk different of unicom, so i change the zip only have kernel
Overclock kernel
and for when can we use it on oxigen or miui or cm7? iam asking because iam one of the persond that the huwaei 2.3 is not working on my device
thanks
vlc_marcos said:
and for when can we use it on oxigen or miui or cm7? iam asking because iam one of the persond that the huwaei 2.3 is not working on my device
thanks
Click to expand...
Click to collapse
ONLY for offical Gingerbread
OK i understood, but you dont think to port it to the others rooms?
genokolar said:
ONLY for offical Gingerbread
Click to expand...
Click to collapse
Geno, do you have plans to update CM7 with .35 kernel?
Where's the source for the .35 kernel? Is it the same as for U8800pro?
hey guys
for what is the enhanced.conf?
thank you genokolar, I'm testing your kernel
cheers
Blefish said:
Where's the source for the .35 kernel? Is it the same as for U8800pro?
Click to expand...
Click to collapse
https://github.com/dzo/kernel_huawei
https://github.com/Victor-android/kernel_huawei_u8800pro
is this for standard U8800?
General mess of this forum makes me always ask this security question....
Druida69 said:
is this for standard U8800?
General mess of this forum makes me always ask this security question....
Click to expand...
Click to collapse
Thread name says u8800 so i dont think its for pro....
sent from ideos x5
the device has to be rooted obviously, yes?
also, a working CWM would be a must to
Druida69 said:
the device has to be rooted obviously, yes?
also, a working CWM would be a must to
Click to expand...
Click to collapse
CMW 5.0.2.7 works on u8800 too
Loureiro said:
CMW 5.0.2.7 works on u8800 too
Click to expand...
Click to collapse
I don't know why but i get blue screen with CMW 5.0.2.7...
krish_nank said:
I don't know why but i get blue screen with CMW 5.0.2.7...
Click to expand...
Click to collapse
with official GB installed?
Loureiro said:
with official GB installed?
Click to expand...
Click to collapse
Yes, as Geno told to use CMW 5.0.2.7 for flashing ICS. i tried it did not work....
why 1.8 ghz. is this a too much and what is the risk?
is it needed to be rooted to install this kernel or the boot.img will root the device????
also, 1.8ghz is the standard OC or we can decrease it to any vallue we like, say using No Frills CPU?
Druida69 said:
is it needed to be rooted to install this kernel or the boot.img will root the device????
also, 1.8ghz is the standard OC or we can decrease it to any vallue we like, say using No Frills CPU?
Click to expand...
Click to collapse
It says max 1.8 so ofc u can set it like before how u want. The boot image is the kernel and its a rooted one. So no u dont have to be rooted, it will do it for you
Sent from my u8800 using XDA App
People could you do some bench with quadrant standard and atitude at 1.0 and at 1.8 to see the performance
Sent from my Huawei Ideos X5 1.12.9(ret4rt) using XDA App
Related
Dear XDA users,
Im looking for the link of the MDJ10.3 kernel, install through CWM. Can anyone provide me the link. I can only find MDJ10.4 and i want the 10.3 install through CWM. I would realy appriciate it!
THNX!
anyone???????
and again someone?
I think the thread with the MDJ Build and kernel was deleted for non compliance to XDA forum rules or something to that effect?
wtf how come? Does anyone have a link for the kernel?
jonny68 said:
I think the thread with the MDJ Build and kernel was deleted for non compliance to XDA forum rules or something to that effect?
Click to expand...
Click to collapse
his kernel and roms were removed for non compliance with the GPL
for not sharing his source
any links to his rom or kernel are not allowed
hmm oke, understandable, can anyone explain to me then how i can rip a kernel from a build (rafdroid 2.3) and make it a zip file so i can install it through CWM?
rbadal said:
hmm oke, understandable, can anyone explain to me then how i can rip a kernel from a build (rafdroid 2.3) and make it a zip file so i can install it through CWM?
Click to expand...
Click to collapse
sorry but no clue on that one
rbadal said:
hmm oke, understandable, can anyone explain to me then how i can rip a kernel from a build (rafdroid 2.3) and make it a zip file so i can install it through CWM?
Click to expand...
Click to collapse
apple-part made an adb-script to install RAFPIGNA 1.7 kernel
http://forum.xda-developers.com/showpost.php?p=11218476&postcount=95
connect phone to pc via usb - Select Charge Only - Run install_kernel.bat
Ye but i want rafdroid 3.2 with the mdj 10.3 kernel.. rafpignas kernel eats alot of battery
Sent from my HTC HD2 using XDA App
does anyonr knows how to extract a kernel and make it suiteable for a CWM install ??
oh man, u pusses so hard, but u cant find in here, sorry bro
rbadal said:
Ye but i want rafdroid 3.2 with the mdj 10.3 kernel.. rafpignas kernel eats alot of battery
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
i disagree. i tested lot of kernels.
rafpigna 1.9 don't use lot of battery.
How should I go abount intalling intellikernel on cm7rc3 . I am a noob and do not really understand the importance of having a seperate kernel (incredikernel is supposed to be superior than the default CM7) .. would I have to do some tweaks after I flash this?
Do I need to wipe anything before I flahs this or any new kernel? is it stable?
kpdadroid said:
How should I go abount intalling intellikernel on cm7rc3 . I am a noob and do not really understand the importance of having a seperate kernel (incredikernel is supposed to be superior than the default CM7) .. would I have to do some tweaks after I flash this?
Do I need to wipe anything before I flahs this or any new kernel? is it stable?
Click to expand...
Click to collapse
Where did you get the "intellikernel" at. Is it supported for the Glacier?
neidlinger said:
Where did you get the "intellikernel" at. Is it supported for the Glacier?
Click to expand...
Click to collapse
Sorry I mean incredikernel.
I tried flashing right now over Cm7 RC3 (without wiping anything and it did not work)
kpdadroid said:
Sorry I mean incredikernel.
I tried flashing right now over Cm7 RC3 (without wiping anything and it did not work)
Click to expand...
Click to collapse
can you show me the link to this kernel?
Where can I find the list of supported kernels?
http://forum.xda-developers.com/showthread.php?t=848453
is the link
kpdadroid said:
Where can I find the list of supported kernels?
Click to expand...
Click to collapse
Development section.
kpdadroid said:
http://forum.xda-developers.com/showthread.php?t=848453
is the link
Click to expand...
Click to collapse
That is for the Droid Incredible.
That is why it will not work on our phone.
You can only flash 3rd party kernels related to your phone, and your skin design. meaning you cannot flash an AOSP kernel for Sense ROM, nor a DInc kernel to a OG Droid.
But I am running CM7 RC3 ... which is AOSP.... I am a little confused.
kpdadroid said:
But I am running CM7 RC3 ... which is AOSP.... I am a little confused.
Click to expand...
Click to collapse
But the Kernel you are looking at is for the Droid Incredible, not for the HTC Glacier. They are two different phones, with two different hardware packages. You must use AOSP kernels for the HTC Glacier.
Could you suggest one that you really like? and do I have to wipe anything before I flash any kernel?
kpdadroid said:
Could you suggest one that you really like? and do I have to wipe anything before I flash any kernel?
Click to expand...
Click to collapse
Personally i suggest running the stock kernel that came with your ROM. And i will only use the kernel that comes with the ROM. The developers have built the ROM to run around that kernel. So it should work the best. I know Faux123 has built some top notch kernels....but i cannot speak first hand.
kpdadroid said:
Could you suggest one that you really like? and do I have to wipe anything before I flash any kernel?
Click to expand...
Click to collapse
i personally like this one....
http://forum.xda-developers.com/showthread.php?t=876848
scroll down until you get to cm7 kernels and download the latest grandkin kernel! instructions are on the page =)
I use fauxs oc/uv just cause he's awesome and you can oc it to 1.8 ghz but you have to be careful when overclocking I'd suggest setting up the governers and profiles in setcpu after flashing the kernel. But no you don't need to wipe anything just boot into recovery and install
Sent from my HTC Glacier using XDA Premium App
Stuck on load
Hey y'all, I have CM7 on my Evo and tried to flash incredikernel http://forum.xda-developers.com/showthread.php?t=848453 using clockwordmod rom manager. Everything seemed to go fine but now it will not get past the white htc evo 4g boot screen. How shall I proceed? I was going to just reflash CM7 but wanted to see what the 'correct' thing to do is, help please!
SOLVED, I definitely learned something new today. Kernels are phone specific haha!
HELLO GUYS.
BY READING THE SUBJECT U MUST HAVE FIGURED OUT I AM A DESPERATE NOOB
BUT SERIOUSLY CAN ANY ONE HELP ME TO INSTALL CWM ON GT-I5801. I AM ON STOCK FROYO 2.2 DDJP4(INDIA) ROOTED MANUALLY9(SUPER1CLICK). PLEASE HELP ME GUYS.. THANKING U ALL IN ADVANCE
i think g3mod kernel has cwm in it just flash g3mod kernel or contact the one who ported cwm to our phone
+1 for g3mod ..
Sent from my GT-I5800 using Tapatalk
Will try thanks
yes G3Mod 1.5.2, all versions have CWM...I personally would recommend 1.5.2 Ultimate Version.
umangsagar said:
yes G3Mod 1.5.2, all versions have CWM...I personally would recommend 1.5.2 Ultimate Version.
Click to expand...
Click to collapse
Well, don't recommend version 1.5.2 because it have a problem with uv and works only with some phones. Better install version 1.6.
Sent from my superfast Galaxy 3
g3mod kernel 1.6 should do the trick
cop1976 said:
Well, don't recommend version 1.5.2 because it have a problem with uv and works only with some phones. Better install version 1.6.
Sent from my superfast Galaxy 3
Click to expand...
Click to collapse
well When i replied to him, 1.6 was still in testing phase by dharamg3 so didnot write that, there wasnt much option then..but good news now is that 1.6 is released and the link is : http://forum.xda-developers.com/showthread.php?t=1129367
Enjoy mate.
umangsagar said:
well When i replied to him, 1.6 was still in testing phase by dharamg3 so didnot write that, there wasnt much option then..but good news now is that 1.6 is released and the link is : http://forum.xda-developers.com/showthread.php?t=1129367
Enjoy mate.
Click to expand...
Click to collapse
but what do u suggest umang.. 1.6 or 1.5? and if i flash it over ddjp4(india) stock kernels will it work?
werker123 said:
i think g3mod kernel has cwm in it just flash g3mod kernel or contact the one who ported cwm to our phone
Click to expand...
Click to collapse
ya g3mod kernel has cwm so flash g3mod kernel and get cwm
parth77 said:
ya g3mod kernel has cwm so flash g3mod kernel and get cwm
Click to expand...
Click to collapse
but will it work on stock ddjp4?
Jai-tulip said:
but will it work on stock ddjp4?
Click to expand...
Click to collapse
Will wrk for any froyo rom..
Sent from my GT-I5800 using Tapatalk
The G3Mod kernel has the CWM included. Stylooo's ROM is the latest to include CWM.
ranadip.bswas said:
Will wrk for any froyo rom..
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
so is it better to (1)hard reset and flash kernel and hard reset again ? or
(2)flash kernel and then hard reset?
Jai-tulip said:
so is it better to (1)hard reset and flash kernel and hard reset again ? or
(2)flash kernel and then hard reset?
Click to expand...
Click to collapse
only flash kernel will do..
Sent from my GT-I5800 using Tapatalk
Jai-tulip said:
but what do u suggest umang.. 1.6 or 1.5? and if i flash it over ddjp4(india) stock kernels will it work?
Click to expand...
Click to collapse
Apologies for late reply, i was on tour.
definately G3Mod Ultimate 1.6 ( no 2nd thoughts for me )
I did use it over ddjp4 India and it is amazing (though I am now on Kyrillos 7.1 coz there hasnt been any ROM like that so far)
v1.6 is stable, no freezes yet for me in last two days since i installed, has CWM, My stats are there in my Signature....Normally I do a wipe before and after flashing Kernel
Share your experience of v1.6 with DharamG3 and thank him if you like it (thats the least we guys can do to motive them)
umangsagar said:
Apologies for late reply, i was on tour.
definately G3Mod Ultimate 1.6 ( no 2nd thoughts for me )
I did use it over ddjp4 India and it is amazing (though I am now on Kyrillos 7.1 coz there hasnt been any ROM like that so far)
v1.6 is stable, no freezes yet for me in last two days since i installed, has CWM, My stats are there in my Signature....Normally I do a wipe before and after flashing Kernel
Share your experience of v1.6 with DharamG3 and thank him if you like it (thats the least we guys can do to motive them)
Click to expand...
Click to collapse
yeah.thanks for uer help.. i flashed gmod1.6 performance.n i must say my phone is more silk.. any ways thanks again umang will trouble u for apps2sd v2.
Jai-tulip said:
yeah.thanks for uer help.. i flashed gmod1.6 performance.n i must say my phone is more silk.. any ways thanks again umang will trouble u for apps2sd v2.
Click to expand...
Click to collapse
The good thing about this forum is there is no trouble in helping any fellow G3 user
as for apps2SD.... check out G3Mod App ...it will help you with getting the best out of g3mod kernels..including app2sd, data2sd, file system convert....etc
umangsagar said:
The good thing about this forum is there is no trouble in helping any fellow G3 user
as for apps2SD.... check out G3Mod App ...it will help you with getting the best out of g3mod kernels..including app2sd, data2sd, file system convert....etc
Click to expand...
Click to collapse
yes umang i have g3mod apk installed. now there r 3 options: 1)convert file systems. 2)data2sd. 3)apps2sd. when i clik data2sd or apps2sd i get " make sure uer sd card is partioned properly". i have a 4gb sd card..so
Q)how to do partition? Q)cud u tell me values of partition? Q)shud i go for app2sd v2?
Q) why to convert file systems?
Jai-tulip said:
yes umang i have g3mod apk installed. now there r 3 options: 1)convert file systems. 2)data2sd. 3)apps2sd. when i clik data2sd or apps2sd i get " make sure uer sd card is partioned properly". i have a 4gb sd card..so
Q)how to do partition? Q)cud u tell me values of partition? Q)shud i go for app2sd v2?
Q) why to convert file systems?
Click to expand...
Click to collapse
go to recovery.. in advanced , u will find an option to partition ur sd..
PS : this wil format ur sd , so plz back up ur sd before perfoming partitioning..
Sent from my GT-I5800 using Tapatalk
Ok, I just realized (again, and until the next time) that Froyo Pro is the best choice for me..
But I will miss custom kernel.. I tried Alfs once, and it was all right but WiFi was not working at all. Copying Wifi libs from GDX didn't help
Can someone re-make Alfs kernel to make it work on FroyoPro? (some ramdisk changes and wifi fix)
I would be grateful... and I'm sure many others..
+1
Sent from my E15i using XDA App
+1............
It could be done but kernel should be made from cm6 core.because all kernels for x8 are made from cm7(gingerbread) core.like alfs,gdx,fxp kernel,nAa...so it would be hard,because fxp gave sources only for cm7 kernel,and most of our kernels are based on fxp kernel source.
Sent from my X8 using xda premium
nice. ....
Its preety easy.We just need to compile kernel from se source and everything should work even on eclair.
I will try and report.
Sent from my E15i using Tapatalk
oh god im waiting for Custom Kernel on Froyo sooooooooo much
and also if im on gingerbead and for example Alfs kernel when im by clockwork install custom zip with froyo i need to change kernel to stock right?
yeap, i love froyo pro and i also love alf's kernel, especially it's OC, i get by far the best results with it, fully stable 787 mhz with smartass v2 i just wish i could combine the 2.
yes yes yes +1 for a kernel for froyo
if we compile those kernels with the same Ramdisk that we have in Stock kernel, probably it should work better in Eclair and Froyo roms, right?
flash this in cwm and you will have working alfs + wifi on froyo pro
http://forum.xda-developers.com/showpost.php?p=20191172&postcount=490
Is this confirmed to work? TIA
Beans
Sent From The Arrow In My Knee
yes, i tried it everything works fine
Hefko said:
yes, i tried it everything works fine
Click to expand...
Click to collapse
WTF is this? you TRIED IT???? i am trying to stay calm so i will be brief....stop trying to scam people here making them trying stuff that just DONT WORK!!!!!
the rest of you reading this, DONT try this, it DOESNT work and will NEVER WORK!!
No, you are wrong, alfs kernel works fine with froyo pro + that fix which repairs wifi. If you want, i can make video with working kernel and froyo pro
Hefko said:
No, you are wrong, alfs kernel works fine with froyo pro + that fix which repairs wifi. If you want, i can make video with working kernel and froyo pro
Click to expand...
Click to collapse
sure make a video i would like to see that....
base on huawei Honor android 4.0 ROM，use .35 kernel , default 1Ghz cpu freq
Working:
3G
Calling
MMS
Signal Strength
All sensors
Headphones
Virtual keys
LED
Screenshots
Sound/Sound Record
Video
TouchScreen
Multitouch
Hardware Accelaration
SDcard/USB
Not Working:
ROOT
Camera
Gapps
WIFI
USB Tethering
Bluetooth
Camera
FM
TV-out
support u8800pro and u8800，you should upgrade to offical android 2.3，if not the usb、RIL will not work.
if you upgrade to offical android 2.3 ，recovery you could use this one（u8800 & u8800pro）：
http://forum.xda-developers.com/showthread.php?t=1343276
Download：http://sourceforge.net/projects/genoandroid/files/u8800pro_u8800_ICS_demo.zip/download
Geno, is not possibke to do something more with our normal u8800.
Sent from my u8800 using XDA App
Nice! Looking forward for more!
nice work.
Which kernel did you use?
Nice Effort Thanks
awesomee great work. now just fix camera& wifi and i will be using it for everyday use
You shouldn't have bricked your Ideos x5 u8800...
So... This works with u8800 AND pro?
support u8800pro and u8800，you should upgrade offical to android 2.3，if not the usb、RIL will not work.
Click to expand...
Click to collapse
And to run this i have to upgrade to 2.3 to get usb and rils working?
I have u8800.
genokolar said:
base on huawei Honor android 4.0 ROM
Worked： RIL、audio、video、USB、3D、sensors
not work：WIFI、Bluetooth、Camera、FM、TV-out
support u8800pro and u8800，you should upgrade offical to android 2.3，if not the usb、RIL will not work.
Download：http://sourceforge.net/projects/genoandroid/files/u8800pro_u8800_ICS_demo.zip/download
Click to expand...
Click to collapse
Wonderful work i will start query saying thank you 1st.
1.Normal U8800 owners should upgrade to 2.2 GB to get the RIL and USB working right??
2.Which CWM we should use to flash this ROM??
3.Same zip file for both phones??
brdnacer said:
what about u8800? when is ics for u8800 coming? any work already?
Click to expand...
Click to collapse
u8800 can use this one too
genokolar said:
u8800 can use this one too
Click to expand...
Click to collapse
Sir what CWM we should use for U8800 with upgraded to GB???
krish_nank said:
Wonderful work i will start query saying thank you 1st.
1.Normal U8800 owners should upgrade to 2.2 GB to get the RIL and USB working right??
2.Which CWM we should use to flash this ROM??
3.Same zip file for both phones??
Click to expand...
Click to collapse
u8800 should upgrade to 2.3
i writed
yes, both
krish_nank said:
Wonderful work i will start query saying thank you 1st.
1.Normal U8800 owners should upgrade to 2.2 GB to get the RIL and USB working right??
2.Which CWM we should use to flash this ROM??
3.Same zip file for both phones??
Click to expand...
Click to collapse
1. RILs didnt work for me. Havent use official GB demo.
2. Normal
3. Yes
u8800 can use this one too
Click to expand...
Click to collapse
K. ty.
Geno was faster
julle131 said:
1. RILs didnt work for me. Havent use official GB demo.
2. Normal
3. Yes
K. ty.
Geno was faster
Click to expand...
Click to collapse
Did you flash GB before you flash this ROM
krish_nank said:
Did you flash GB before you flash this ROM
Click to expand...
Click to collapse
As i wrote, no i didn't.
So this is going to have what kernel
Sent from my u8800 using XDA App
Geno, How is your u8800 doing?Have you taken it to warranty yet? I hope you can get camera and wifi working. Then I consider the rom ready for everyday use.
my opinion
Tested it and i must say i was not impressed at all.If this is what ICS has to offer i must say i am disappointed.So i cant understand why all the fuss about it.i guess the final version will impress me.
sweet. It's working here on U8800. it's smooth enough for first release great work. thanks
Just so you know, Camera is listed twice in the Not Working section in the forst post