Related
I don't know why, but for some reason, whenever I turn on/reboot my NC, with microSD inserted, it always goes directly to CWM. I'm getting annoyed of having to take out the SD whenever I turn on/reboot my NC just so it would go to CM7. Is this normal? Doesn't it supposed to have a combination of keys to press before you turn it on/boot (like the power button + n key) plus proper timing for it to go to CWM? Is there a way to fix this? Also, I've noticed that whenever I'm in CWM, the version says that it's 3.0.2.8. But the thing is, I've already flashed the latest version of CWM, 3.2.0.1 through ROM Manager. Why is this happening? Any ideas how to fix it?
Thanks so much in advance!
les02jen17 said:
I don't know why, but for some reason, whenever I turn on/reboot my NC, with microSD inserted, it always goes directly to CWM. I'm getting annoyed of having to take out the SD whenever I turn on/reboot my NC just so it would go to CM7. Is this normal? Doesn't it supposed to have a combination of keys to press before you turn it on/boot (like the power button + n key) plus proper timing for it to go to CWM? Is there a way to fix this? Also, I've noticed that whenever I'm in CWM, the version says that it's 3.0.2.8. But the thing is, I've already flashed the latest version of CWM, 3.2.0.1 through ROM Manager. Why is this happening? Any ideas how to fix it?
Thanks so much in advance!
Click to expand...
Click to collapse
Did you try formatting your SDcard? It's possible CWM Recovery is still on the card.
-Racks
racks11479 said:
Did you try formatting your SDcard? It's possible CWM Recovery is still on the card.
-Racks
Click to expand...
Click to collapse
Oh no. I've got all of my apps in the sd. I've got ebooks and music too, I can't format it. I'll try to back up everything first and see how it goes. Thanks, racks. You've always been helpful.
Much easier way I have CWM and phiremod 6.2 on one card and use another for everyday use.For acouple extra bucks it saves alot of hassle.
Sent from my ADR6300 using Tapatalk
Is this even possible? I don't think I've seen any clear directions on how to do this.
Thanks!
Very easy, very possible.
Just follow the instructions to install cm7 to Emmc.
Seperately you need to burn the honeycomb image to an sd card.
Holding the n button on boot will give you boot options.
That easy, eh? Thanks man, will check it out.
Sent from my HTC Vision using Tapatalk
I've spent about 20 hours total trying to unbrick my nook color.
It started when I was (happily) running CM7, but I wanted to have HC preview 4 to use at times, so I decided to dual boot it. I went in to dual boot it, and it had an error. So I flashed the remove dual boot zip to reset it, then I went looking for an answer. I find that it looks like my media partition somehow got corrupt, so I go into ADB to see if I can get that working. From within adb I run "adb reboot recovery", and then it never turned on. Freaking out, I searched for an answer. I got it booting into CWM on SD, and Nookie Froyo SD. I've tried all the unbricking methods, even the advanced one that requires DDing boot.img and system.img. I got into adb from recovery and found that my partition table - I had none. So I find out how to fix that, and I do. Fixed it properly infact, looked exactly like it should. So then I go and DD boot.img and system.img, remove the SD, unplug from power, and try to boot into recovery, no luck. Tried a normal boot, no luck. I've done this multiple times. I think it has something to do with the boot partition, I verified it had contained the proper files(u-boot.bin, uImage, etc.), it was marked as bootable, but it wasn't booting.
I held down the power button for 25 minutes just to confirm without a doubt it wasn't(I watched a show while waiting, unfortunately it was my figure holding it down, not tape).
Nothing I tried fixed it.
I think I may have been one of the first to "actually" brick my nook.
Any tips on what I can do to try to unbrick it? Ask me questions, have me acquire data, I don't care.
I have access to adb in recovery, and adb connected wirelessly via nookie froyo sd bootable(for some reason it won't let me use adb via usb).
I apologize if this is in the wrong section.
Also, before you go saying that this is pretty much a repost of other threads, I looked at multiple threads with people trying to fix their nook, threads with 60 pages, read all of them. No one had a problem like mine.
If you are willing to put CM7 on the internal memory, follow the instructions here: http://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/
Make your you use the latest version of CWR (v3.2.0.1) Once you have everything working properly, reformat the card to use as storage. Better, keep it as is in case you ever have to preform a new installation and buy a new card for storage. You will need one to properly use CM7 to full advantage.
patruns said:
If you are willing to put CM7 on the internal memory, follow the instructions here: http://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/
Make your you use the latest version of CWR (v3.2.0.1) Once you have everything working properly, reformat the card to use as storage. Better, keep it as is in case you ever have to preform a new installation and buy a new card for storage. You will need one to properly use CM7 to full advantage.
Click to expand...
Click to collapse
I was hoping doing what you said would work - but it didn't.
I follow this guide(http://mrm3.net/nook-color-how-to-blue-dot-nook-color/) to get the partitions reformatted properly then installed it.
Glad the site still was able to help you with your issue....
It didn't help. I already followed that guide. Their is one like it here.
Sent from my VM670
tannerzion said:
I was hoping doing what you said would work - but it didn't.
I follow this guide(http://mrm3.net/nook-color-how-to-blue-dot-nook-color/) to get the partitions reformatted properly then installed it.
Click to expand...
Click to collapse
That is the same site I sent you to, only a different page.....
patruns said:
That is the same site I sent you to, only a different page.....
Click to expand...
Click to collapse
No, I just didn't have to found the one on xda because there was one on that site. No need to fight.
Sent from my VM670
Since you said "trying to unbrick" then why not try to reverse back to the original state before installing/running any other ROMs
votinh said:
Since you said "trying to unbrick" then why not try to reverse back to the original state before installing/running any other ROMs
Click to expand...
Click to collapse
Tried that.
Sent from my VM670
tannerzion said:
Tried that.
Sent from my VM670
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=kOypmSCEHbc
Go to my youtube page.
Download my ROM by clicking more on my description.
Extract and burn to a SD card with WinImage or something.
Seems like you need to fix your boot partition. Hold the power button down for 15 seconds with no USB plug in the nook. Put your recovery SD in the nook and hold power for 5 seconds you should boot to the SD card. Flash the “repartition-boot_emmc-800mhz-stock.zip” if you want the 800 MHz stock kernel and reboot the nook. If you want the 1.1 GHz Kernel flashed then use “repartition-boot_emmc-1.1ghz-froyo_setboot.zip”.
Once you flash that go ahead and flash my rom just for ****s and giggles to see if you can boot into it. Enjoy. Let me know if I helped.
If this doesnt work you can always DD your way to a new partition. Example below but lets do what I put up top first.
dd if=/dev/block/mmcblk0p1 of=/sdcard/xe.nook.color-froyo-v2.2-boot.img
dd if=/dev/block/mmcblk0p6 of=/sdcard/xe.nook.color-froyo-v2.2-data.img
dd if=/dev/block/mmcblk0p5 of=/sdcard/xe.nook.color-froyo-v2.2-system.img
Well, I'm already processing a return... But if I run across this problem on my new nook, I'll try that.
Sent from my VM670
tannerzion said:
Well, I'm already processing a return... But if I run across this problem on my new nook, I'll try that.
Sent from my VM670
Click to expand...
Click to collapse
Return it and try CM7 normally installed to EMMC. Dont **** around with dual boots and all this other crap
When you get your new one in, and if you decide to put CM7 on EMMC, just leave it as CM7 alone.
Shame you sent it back before we could work it out, I was looking forward to trying to fix this - but I can imagine just how frustrated you have been with it and I don't blame you. Probably at the end of your rope and in your place, if I could have gotten B&N to exchange it, I would have too.
Because the Nook Color boots from the SD first, you can always just install whatever else you want to play with to a MicroSD card and run it that way.
Verygreens sd card prep thread is a fantastic first step in this regard. (click "SD Install" in my sig to get to it)
I personally still have my Nook Color stock on EMMC (with B&N official updates) and run my CM7 and other installs from the sdcard. Just make sure it is a SanDisk card and you'll be good to go. (also links in my sig to find out why SanDisk if you're curious)
The benefit to running from the sd-install, especially on possibly unstable ROMS, is that if it doesn't work you simply remove the card to get your device back - instead of having to run recovery on your device.
The latest stable release of CM7 is absolutely fantastic on the Nook Color, and i'd highly recommend it as your daily driver.
Blue6IX said:
When you get your new one in, and if you decide to put CM7 on EMMC, just leave it as CM7 alone.
Shame you sent it back before we could work it out, I was looking forward to trying to fix this - but I can imagine just how frustrated you have been with it and I don't blame you. Probably at the end of your rope and in your place, if I could have gotten B&N to exchange it, I would have too.
Because the Nook Color boots from the SD first, you can always just install whatever else you want to play with to a MicroSD card and run it that way.
Verygreens sd card prep thread is a fantastic first step in this regard. (click "SD Install" in my sig to get to it)
I personally still have my Nook Color stock on EMMC (with B&N official updates) and run my CM7 and other installs from the sdcard. Just make sure it is a SanDisk card and you'll be good to go. (also links in my sig to find out why SanDisk if you're curious)
The benefit to running from the sd-install, especially on possibly unstable ROMS, is that if it doesn't work you simply remove the card to get your device back - instead of having to run recovery on your device.
The latest stable release of CM7 is absolutely fantastic on the Nook Color, and i'd highly recommend it as your daily driver.
Click to expand...
Click to collapse
I wanted something on the emmc, and my microsd card is to slow to consider booting from it. I'll probably get a better one or just use my current one, and install honeycomb on that.
xboxexpert said:
Return it and try CM7 normally installed to EMMC. Dont **** around with dual boots and all this other crap
Click to expand...
Click to collapse
I had CM7 as my normal install, I just wanted to try honeycomb and my sd card was to slow to consider booting from it.
There's an image around these forums somewhere that lets you dual-boot Phiremod and HC preview on the SD (you just flash it to the SD and go).
It's always safer to play with SD new boots, since you won't hurt your EMMC installs.
With that really said -- the HC previews on the NC are ... not really worth playing. There's no hardware acceleration - so that are abysmally slow. Really bad. You'll try swiping the home screen and go "ugh, back to CM7".
Quite honestly, there's nothing better for us than CM7 on SD or EMMC. Phiremod is just candycoating on CM7 anyhow - and nobody's ever come up with a ROM for us that isn't just fiddling around with a base CM7 or a themed layer on top of it.
What we get from our CM7-Encore installs is pretty much what we want. Theme it all you like - but in reality, nothing else beats it.
youre in luck...my Bricked nook is not getting returned...
i have a bricked nook ...had cm7 on it for 1 1/2 years ..thought i would put cm10.1 on ...to emmc... everything went well installed cm10.1 then gapps ...forgot to install cwm or twrp...oops ...been bricked ever since ..tried pulling battery ..left it disconnected 8 hours ..plugged battery back ...still unresponsive ...tried tips section from leapinlar to no avail ..tried 8 boot method nada!!...never even see a backlight flash ..battery shows 5volts so its not dead...any help ?? anyone??...thanks
---------- Post added at 04:56 PM ---------- Previous post was at 04:51 PM ----------
omap3630 only sign of life .. for less than a second when power button is held down for say....10 seconds...on the USB to the pc..of course no booting happens needless to say..
bodecove said:
i have a bricked nook ...had cm7 on it for 1 1/2 years ..thought i would put cm10.1 on ...to emmc... everything went well installed cm10.1 then gapps ...forgot to install cwm or twrp...oops ...been bricked ever since ..tried pulling battery ..left it disconnected 8 hours ..plugged battery back ...still unresponsive ...tried tips section from leapinlar to no avail ..tried 8 boot method nada!!...never even see a backlight flash ..battery shows 5volts so its not dead...any help ?? anyone??...thanks
---------- Post added at 04:56 PM ---------- Previous post was at 04:51 PM ----------
omap3630 only sign of life .. for less than a second when power button is held down for say....10 seconds...on the USB to the pc..of course no booting happens needless to say..
Click to expand...
Click to collapse
And bootable SDs do not work? It will not even turn the screen on unless there are valid boot files in the boot partition or on a bootable SD.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
And bootable SDs do not work? It will not even turn the screen on unless there are valid boot files in the boot partition or on a bootable SD.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
tried both from ,,A 10 post .... New Bootable CWM Recovery SD (v5.5.0.4 and now v6.0.1.2)
....tried both versions also 1gb_clockwork-3.2.0.1-eyeballer version ...win32diskimage ...hp format utility also formatted with sdformatter
bodecove said:
tried both from ,,A 10 post .... New Bootable CWM Recovery SD (v5.5.0.4 and now v6.0.1.2)
....tried both versions also 1gb_clockwork-3.2.0.1-eyeballer version ...win32diskimage ...hp format utility also formatted with sdformatter
Click to expand...
Click to collapse
Well, unless you can get a bootable SD to boot, you are toast.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Well, unless you can get a bootable SD to boot, you are toast.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
any chance I am missing some simple step...
---------- Post added at 09:36 PM ---------- Previous post was at 09:14 PM ----------
bodecove said:
any chance I am missing some simple step...
Click to expand...
Click to collapse
...what are your thoughts on making the sd cards with my linux(mint 14) laptop ...am I grasping for straws??
ok so after 3 days of trying, i keep getting stuck on a boot-loop I am asking for some help.
before I begin, I have successfully rooted and installed cm7 on 2 nooks that came factory 1.2,I have searched google and these forums but can't find anything with my specific needs.
I have followed the directions on this thread to a tee:
http://forum.xda-developers.com/showthread.php?t=1054027
i am using a bootable cwm card (2GB) (cwm version 3.0.2.8)
after installing ManualNooter-4-5-18.zip then ManualNooter-4-6-16.zip I remove the sd card and reboot and I get a boot-loop with the "n color" screen animation. It has not booted successfully yet.
I have already used the 8 failed boots method to restore to factory and re-registered the nook.
Then I redid everything again and im back at the boot-loop.
any ideas
i do not have an answer but this answers my question of whether I want to run manual nooter on my 1.3 or try cm7. the cm7 steps seems more intimidating
Well i tried several more times last night with no luck. Then i got brave and just wiped everything (data,system,cache,dalvick) then flashed cm7 and gapps straight from my cwm boot card. I somehow
Ended up with a fully functional nook. App market works. Rebooted several times to be sure. I even tried usb host with my homemade adapter. Mouse, keyboard, and sandisk cruzer all work splendidly thru a powered hub.
My only mistake was i cant find my backup of stock 1.3 rom. Is there one floating around?
Sent from my LG-VM670 using Tapatalk
If I'm understanding correctly, you're trying to go from CM to 1.3, correct?
From what you've described, I suspect Clockworkmod 3.0.2.8 is your problem. If you look carefully as you format /data in preparation for reloading the BN 1.3 firmware, I think you'll see that the format is actually failing. That version of CWM doesn't handle the partitions correctly.
You want 3.2.0.1. See the edits at the top of this thread: http://forum.xda-developers.com/showthread.php?t=987735
If you're already on CM7.1, you probably have the correct version of CWM installed. You can save yourself a step by formatting the /data and /system partitions using that, then continuing on with the rest of the procedure for restoring BN 1.3. I went through all this myself a few days ago while preparing to go to BN 1.4.1.
I forgot to mention in my last post that i realized i was using the wrong cwm image and i burned another card with cwm 3.2.01.
I was still getting a boot-loop so i wiped everything and went straight to cm7.
Sent from my LG-VM670 using Tapatalk
@bobstro
I didn't read your post correctly.
I had a stock nook that i want to install cm7 on. Not the other way around. I asked about a stock 1.3 file just in case i need to do a restore. The nook is done. Its running cm7 just fine and i have given it back to my friend.
I really need to get myself one :-(
I usually mess around with my sons but he's at his mothers for the weekend with it. After christmas im getting one. Dont know if it'll be a color or a nook tablet but im getting one for sure!
Sent from my LG-VM670 using Tapatalk
If you intended to install CM7 from beginning, then why you wasted time messing around with ManualNooter?
Im still rather new to working on nooks. I thought that it was required to use manual nooter first. Im still not sure.
Can someone clarify for mr. If i just bought a nook and i want cm7 on it, whats the best procedure?
Sent from my LG-VM670 using Tapatalk
pdrift said:
ok so after 3 days of trying, i keep getting stuck on a boot-loop I am asking for some help.
before I begin, I have successfully rooted and installed cm7 on 2 nooks that came factory 1.2,I have searched google and these forums but can't find anything with my specific needs.
I have followed the directions on this thread to a tee:
http://forum.xda-developers.com/showthread.php?t=1054027
i am using a bootable cwm card (2GB) (cwm version 3.0.2.8)
after installing ManualNooter-4-5-18.zip then ManualNooter-4-6-16.zip I remove the sd card and reboot and I get a boot-loop with the "n color" screen animation. It has not booted successfully yet.
I have already used the 8 failed boots method to restore to factory and re-registered the nook.
Then I redid everything again and im back at the boot-loop.
any ideas
Click to expand...
Click to collapse
The only boot loop issue I'm aware of is related to Adobe AIR and Flash. The fix is to uninstall them and then reinstall from Market.
Sent from my NOOKcolor using XDA Premium
pdrift said:
Im still rather new to working on nooks. I thought that it was required to use manual nooter first. Im still not sure.
Can someone clarify for mr. If i just bought a nook and i want cm7 on it, whats the best procedure?
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
I hope you do use Windows at some points.
Let's put it this way.
You bought a PC with Windows XP pre-installed, get home, you don't want XP, so you install Windows 7 on the PC. You just whack the XP.
Same theory applied here, B&N shipped their NC out with the original stock ROM, which is Froyo-based OS. You want to install CM7, which is Gingerbread-OS ROM. You just whack the stock and install CM7.
oh I get it know. so its pretty easy if you want to go straight to cm7 just wipe and flash.
After reading some posts from the nook tablet section, i guess i'm getting a nook color.
what a shame about the locked bootloader :-(
i didnt technically solve the boot loop issue, i just erased everything, but should I mark this as solved and if so how?
The current Nook Color bootloader is not locked. The Nook Tablet's is. I wouldn't necessarily rule anything out, though. The bootloader on the Motorola Droid 2 is also locked, and there's quite an active Cyanogenmod community around it. The only problem is that we're stuck with whatever kernels B&N release, so ICS may be a long way off. I suspect the NC will remain the tuner's machine of choice, but the performance on the NT is very nice. If you can live with a rooted B&N ROM, it's a nice device for now.
billingdl said:
The only boot loop issue I'm aware of is related to Adobe AIR and Flash. The fix is to uninstall them and then reinstall from Market.
Sent from my NOOKcolor using XDA Premium
Click to expand...
Click to collapse
No, it seems that some 1.3 based NC units will bootloop if 4.6.16 is used to root them. I'm not sure why. Even after repartitioning to original nook partition sizes, or using CWM 3.2.01 (which supports the new partitioning), it'll still bootloop if 4.6.16 is used. Might be because of the different kernal included, but I'm not knowledgeable enough to know for sure. They root fine with 4.5.18. Haven't tried one with the new 1.4.1 compatible nooters.
To the original poster;
I'm having the same problem here, installed 4.15 successfully, installed 4.16 and am getting stuck in boot loop at the rainbow nook color screen.
I'm not understanding the 8 boot fail procedure though. Is this when you let the boot loop run through 8 times or when you get to the point of when the boot loop starts, shut the NC off and power it back on?
Also, to install cm7, all you did was put it on your sd card, and installed it through cwm?
The 8 boot method if i recall correctly is when you boot the nook and wait until the splash screen shows up immediately hold the power button and shut it down. Repeat 7 more times. If you did it correctly it should take over and do a restore on its own.
If you want to go straight to CM7 I dont think you need to go thru with this procedure because if you create a bootable cm7 card and insert it in your nook while its off then power up, it should boot you into cwm recovery. Once in the recovery you can flash cm7.
sent from my OV CM7 IHO using tapatalk
pdrift said:
The 8 boot method if i recall correctly is when you boot the nook and wait until the splash screen shows up immediately hold the power button and shut it down. Repeat 7 more times. If you did it correctly it should take over and do a restore on its own.
If you want to go straight to CM7 I dont think you need to go thru with this procedure because if you create a bootable cm7 card and insert it in your nook while its off then power up, it should boot you into cwm recovery. Once in the recovery you can flash cm7.
sent from my OV CM7 IHO using tapatalk
Click to expand...
Click to collapse
Thank you good sir! I was stuck in boot loop forever and couldn't find a clean explanation of the 8 boot fail process. I always tried to turn it off when the rainbow nook color screen came up.
I got it reset, made a flashable CWM SD card with 3.2 and then flashed CM7 on there and it works great!!
That was very frustrating, thank you!
Dont mention it, Glad to here I was able to help you out. I felt the same way when I was in that situation. Lots of googling to get a clearer idea on what that 8 boot method entailed. CM7 really makes it feel like a totally different device.
To all the devs that work on these projects, thank you
sent from my OV CM7 IHO using tapatalk
ive recently purchased a nook color version 1.3 and did all the steps to build cm7 on sd ard inserted it into my nook it downloaded then rebot and seem to come up im cm7 but my touch screen isnt working any suggestions?
Hi,
I had cm7 installed on sd card and now i want to try PA CM9 on same card. I formmated sd card and used verygreen's image to put ParanoidAndroid zip on sd card and then inserted it in nook. I got errors telling me that it can't find cm-update files. I thought it would normally install new rom but i guess i had to first wipe old informations from nook from cm7. What should i do now?
Thank you in advance
You have to rename the file .. add "update-" to the front of it (without quotes but with dash) and flash again. You don't have to wipe anything..
Thx that worked but now it's stucked at black screen after universal boot screen. Last time i did this with cm7 it went perfect smooth.
Vidjda said:
Thx that worked but now it's stucked at black screen after universal boot screen. Last time i did this with cm7 it went perfect smooth.
Click to expand...
Click to collapse
Are you using the latest PA? I found that the version prior to the latest did not work on SD installs. And PA is kind of particular and you may want to wipe your card and start fresh.