Related
I will post the long version here, mainly because I have nothing better to do.
Here is the situation. I bought a NC about 6 months ago. I rooted it using Auto Nooter. I have no idea what ROM I installed to be honest. I'm very much a novice at this. And I'm quite stupid to boot, I might add. It has worked relatively ok since then. The ROM seemed a bit buggy and I had some initial troubles with constant reboots, in addition to some basic things not working and way bogging the thing down, but in general it was ok. I haven't used it much since unless I was traveling.
Today....I was traveling. Traveling to BFE. As such, I decided to bust out my trusty NC and download a new book while I was waiting for my flight. I did so, and something went a bit haywire. It seems that somehow, without prompting, the device has restored itself to the stock B&N ROM (1.1 maybe?). Yet - the Android OS is still there. For example I can click on my task manager app in the lower left corner of the homescreen and it shows that all of my apps are running and I can even switch to them. But my homescreen is defaulted to the B&N one showing my eBooks and I can't figure out how to get my Android launcher back. I have tried to reboot and it does the Droid boot up but reverts to the same B&N home screen.
I was thinking about trying to update to a new ROM since it had been awhile and I figured there must be something better/more stable out there now - Honeycomb or whatever. I guess this is the kick in the ass that I needed.
So now here I sit in a hotel room in BFE. There are no restaurants open past 9. There are no bars. There IS a Super Wal Mart but I think I'm gonna pass on that.
I figured I would look into this. Where to start? Should I re-set this thing to stock and then just pick a new ROM and re-root? Can I do any of this without having a SD card slot in my laptop - just using a USB cable? Will I lose any eBooks that I downloaded?
I await your sage advice.
rooting actually means gaining super user access to the current android rom. B&N, i believe is Froyo, so you did not install any rom so to speak. you were probably just rooted.
I think the issue is with the launcher and not that it is back to stock. What happens when you long press on the home screen?
If you plan to do anything, you will definitely need an sd card reader.
If you autonootered, then you were running stock, but rooted. With a custom launcher replacing the stock launcher, it sounds like.
At any rate, you were probably hit with the automatic update to B&N 1.2 (which is Android 2.2, iirc.) You almost certainly aren't rooted anymore, but it may allow you to run any apps that you already had downloaded, just from the stock app launcher.
When you get an SD card reader, you can check out Manual Nootering. It's basically the same as the old Auto Nooter, but for B&N 1.2. If you change the rom entirely (install CM7) or just run a different rom from an SD card, you'll avoid having B&N overwrite your root access in the future.
Thanks for the responses. I believe that you are correct. I actually was running 1.0.0. I used auto-nooter to root the thing and had it working with a custom launcher. I don't think it updated to 1.2. In fact I know that it didn't update to 1.2. I am trying to get it to do that right now.
I would like to install a new ROM or root or do something after it updates to 1.2 so that I have access to the Android market. What is my best way to do this? Should I just root again from 1.2? Should I install this CM7?
Can you help me understand the differences? Thanks again.
I could Super Wal Mart tonight for a SD card reader if I'm feeling frisky.
I've got all kinds of problems.
I went to update to 1.2 from 1.0. I removed my SD card and erased and deregistered device. I booted it back up and it thinks it's a phone. I put the 1.2 file in the root drive via USB, as I have read over and over that the thing should recognize the 1.2 file and reboot itself. It's not working. I erased and deregistered again. same deal.
Any advice?
I'd do a full factory reset, then try the update to 1.2 again.
A couple of things about the 1.2 update -- do not unzip the update file or rename it. Just drop it as-is into the nook. And make sure to eject the nook from your computer and unplug it.
Thank you aka. I got it to take. I am now at 1.2. Now back to square 1(.2). Any help on this?
Baboontyme said:
I would like to install a new ROM or root or do something after it updates to 1.2 so that I have access to the Android market. What is my best way to do this? Should I just root again from 1.2? Should I install this CM7?
Can you help me understand the differences? Thanks again.
Click to expand...
Click to collapse
Baboontyme said:
I booted it back up and it thinks it's a phone. I put the 1.2 file in the root drive via USB, as I have read over and over that the thing should recognize the 1.2 file and reboot itself. It's not working. I erased and deregistered again. same deal.
Click to expand...
Click to collapse
ETA: lol, congratulations! I guess just skip to that link at the end.
I'd agree with akaCat that you should do a factory reset, BUT you can only do that if you still have the stock recovery utility, and it seems possible that you do not. Try to get the NC to reset by interrupting the boot 8 times. If it doesn't work, you may have installed ClockworkMod Recovery on your Nook Color in place of the stock recovery utility. You may have done so while rooting, or later from the ROM Manager app, perhaps even by accident.
Have you attempted to boot to recovery by holding down "n" while you power on the device, and continuing to hold power + n for about six seconds (1-one-thousand, 2-one-thousand, etc), then releasing both? If so, do you get a factory reset dialog (series of yes/no options) or a longer menu including items like "mounting and storage" and "flash zip from sd card?" If you get the longer menu, then that's ClockworkMod Recovery, and neither the 8-failed-boots-reset nor the automatic update are going to work.
If you do have ClockworkMod Recovery, don't do anything yet. Hopefully somewhere on the screen it tells you the version number, in the format 3.0.x.x. Just let us know that version number and power off the NC.
If you still have the stock recovery utility, then do the factory reset, boot into the stock OS, connect USB, drop the update file straight on the Nook (not in any folders), safely remove the NC from your PC, and let it sit. Hopefully it will reboot itself.
If not, the next step is probably going to involve preparing a bootable ClockworkMod SD and manually installing a CWM-compatible version of the update, or of a different ROM. This article may help you wrap your head around the different options: http://quinxy.com/guides/how-to-pick-your-nook-color-operating-system-and-install-options/
ETA: lol, congratulations! I guess just skip to that link at the end.
Thank you, Tao. I seem to be a bit stuck, though.
I'm at 1.2 stock. I was able to reformat and erase my sd card. I went to load the .gz image onto the card (for CM7, per instructions here http://forum.xda-developers.com/showthread.php?t=1000957) and I also loaded the nightly build. Then inserted card into NC and booted. Nothing.
Any idea what I'm doing wrong? Should I unzip either file?
One thing that might/might not matter....when I went to eject the SD card from my PC, I wasn't given that option so I just pulled it.
One more thing.....the instructions at the link above instruct you to "write the image to your SD card" but then go on to say "eject the SD card" and then further "insert the uSD card into your computer"
Huh?? Isn't it all on the same card? Why do I need two different cards? What am I missing?
This blog breaks down the same process a little more step-by-step, with videos: http://www.anamardoll.com/2011/04/ereader-running-cm7-firmware-on-nook.html
You can skip the long preamble down to "Ready? Let's get started."
You do need to unzip the disk image, and write it to the SD using a program like Win32DiskImager or WinImage. It's also definitely a good idea to safely eject the SD card from your PC.
Hi Tao and others. Thanks again for all of your help. I'm almost there!
I followed this Ana chick's directions and I have CM7 booting up. I am now at the stage where I am trying to boot up in recovery mode so I can get the google apps and wifi thing going. I can't get it to work! I am holding down the "n"/home button and then the power button and it keeps booting up with CM7. I've tried it probably 20 times. Any help? Thanks!
Can someone also tell me how to access the book I just purchased and was in the middle of reading? Do I have to go somewhere and re-download?
Baboontyme said:
Hi Tao and others. Thanks again for all of your help. I'm almost there!
I followed this Ana chick's directions and I have CM7 booting up. I am now at the stage where I am trying to boot up in recovery mode so I can get the google apps and wifi thing going. I can't get it to work! I am holding down the "n"/home button and then the power button and it keeps booting up with CM7. I've tried it probably 20 times. Any help? Thanks!
Click to expand...
Click to collapse
I should add that though I can get CM7 to boot, I never get "The Power of Reading". It's just kind of a flash.
That's all normal--verygreen had to make a new uboot, which no longer shows "The Power of Reading" and also flies through a recovery boot so fast you could miss it. If gapps didn't install, just make sure the .zip is still in the boot partition and keep trying. I'm pretty sure holding power > reboot > recovery boot works now from within CM7, but I would go into Settings>Accounts and try to sign in to Google before assuming it didn't install.
If the book was a B&N purchase, once you have the market working, just install the Nook app and sign into your account, and you should be able to re-d/l the book, possibly even still synced to where you left off.
Thank you so much Tao and others. Up and running with CM7. Any additional mods I should be messing with?
btw, you can also boot into recovery through rom manager, its easier.
Baboontyme said:
Thank you so much Tao and others. Up and running with CM7. Any additional mods I should be messing with?
Click to expand...
Click to collapse
You can overclock: http://forum.xda-developers.com/showthread.php?t=925451
Just make sure you grab the version for SD, and install it just like gapps, then set clock speed via CyanogenMod Settings>Performance>CPU
boxcar8028 said:
btw, you can also boot into recovery through rom manager, its easier.
Click to expand...
Click to collapse
Easier than holding power a sec, poking "Reboot," then "Reboot to Recovery?"
Really, it's about the same either way, depending how handy ROM manager is on your system.
Well, after a few weeks of reading posts, even opening up the hardware and taking the nook apart, here I am asking a question. I figure I would go to the source rather than those other place I was reading and tryign to get info from (mot os those places link here anyway). I know that everyone says that the nook is "unbrickable;" while I want to believe it, I may be in a place where it may be true.
I do want to add a thanks as well, since the NC "tablet" has been very handy, and my wife and I have really enjoyed it. Wouldn't have happened without you all. I wish I had more time to participate in developing, but working 80+ hours/week in a hospital limits my free time, as you can imagine.
I rooted the NC and installed Cyanogenmod 7 back in July 2011. It was a 1.1 model (if I recall correctly). I installed the mod to EMMC, along with CWM. Things ran fine for 6 months. Literally no issues. Then, one night the battery was dead, so I plugged it into the computer USB to charge while the machine was off. Didn't touch it at all. When I went to turn it on again, I was stuck in a bootloop. It would go to the cyanogenmod screen and say "Loading" then would start over again. So, I naturally made a bootable SD card, and tried going into CWR to fix things. However, the SD card had the bootloop as well. It would get to the two skulls and "Loading", flash blank, then start over again.
That went on for a while. I couldn't boot into anything, not into recovery, alternate images, literally nothing. So, I tried different images --- nothing. Finally, I did the power+n and got into the only screen that wouldn't keep resetting. It has blue text and says "Entering boot menu". The menu says "Encore U-boot Menu by j4mmr. 1.2 port+ extras by fattire." From this screen, I can navigate and change the boot options. However, once again, whatever I try does not actually boot, regardless of what I set it to. The only thing that I got from getting here was no more boot loops. After getting it to this point, I can try loading anything, and it will start, then the screen goes black/blank, and nothing happens. Left it on for hours to test.
Since that point, I have switched cards (SanDisk 2 GB class 4, Patriot 8 GB and a generic 8 GB microSD). I know that cards work correctly because I got a hold of a second nook, and they work fine on it. Below are a list of all the images I have tried to run off the SD. Again, nothing will boot, not even clockwork recovery/clockworkmod.
128 mb rootpack (IOMonster)
clockwork 3.0.2.8
clockwork 3.2.0.1 eyeballer
Nooter
Mirage_CM7_ICS_CM9_DualbootSD (this card works great on the working NC)
TWRP 2.0 RC0
Generic SD
Clockwork 0.7 -> starts boot loops again
I also tried ADB, connecting to the computer and using putty over SSH. Didn't work. 8 interrupted boots with 9th holding power+n. Nope. I even took the nook apart and disconnected the battery. Still no go.
If I recall, I think I had CWM 3.0.0.5 installed to the card and to the emmc.
If anyone has any other ideas, I could really use the help. I consider myself pretty computer literate (build my machines, coded in my spare time in the past, hacked a lot of my electronics). I have read many guides/sites and even tried the outdated stuff. Once again, I cannot get into clockwork recovery, so any guide that says to do that as the first step will not work. I also cannot boot off of the SD on cards that I know function.
Would using an older version of CWM (prior to 3.0.0.5) work? I think I remember reading a bunch of stuff about problems people were having with that version. The thing is, I wasn't installing or flashing anything new. I wish I was, because then I would know what was happening when everything got screwed up.
Thanks a bunch in advance for your guy's (gals?) time. This has been really painful.
Wow, that must be frustrating. First make sure you didn't change the boot settings to something other than the SD card when you were in the boot menu. As long as the Nook is powering on and doing something you can probably save it from being a brick.
I would start with a newer version of ClockWork Mod Recovery here: http://mrm3.net/blog/2011/03/11/nook-color-updated-clockwork-recovery-bootable-sd/
There is a contradiction in the file names but the actual version should be 3.2.0.8. If that doesn't work then you may want to go back to an older version. In that case I would still load a newer version's zip file onto that card, so that if you do get the older version to boot you can use it to flash the newer version.
Before going back to older CWM versions though give this a try if the new CWM above doesn't work http://forum.xda-developers.com/showthread.php?t=958748
JP
Yeah, it has been frustrating, especially not knowing what happened in the first place. I actually did try the version from that first link (where I put 3.0.2.8). Again, the big issue I am having is that I cannot even get into the CWM. If I could, I could fix it. I also saw and read through that xda thread you kinked to (open right now in my browser), but the problem remains that I cannot even get to the point where I can flash something.
Thanks at least for responding. I'll try a few more things and see if it works, but I am running out of ideas.
In theory creating a bootable CWM card will get you into recovery even though you can't access the Recovery on the internal. Once you reach Recovery from the SD card you can flash whatever you need. It is just a matter of making a bootable recovery card that boots far enough to get you there.
In theory, yes, but as I said in my first post, I tried all the bootable cards without any luck. When I try to set the SD card as primary boot from that one screen from fattire, it locks and never restarts.
J515OP said:
Wow, that must be frustrating. First make sure you didn't change the boot settings to something other than the SD card when you were in the boot menu. As long as the Nook is powering on and doing something you can probably save it from being a brick.
I would start with a newer version of ClockWork Mod Recovery here: http://mrm3.net/blog/2011/03/11/nook-color-updated-clockwork-recovery-bootable-sd/
There is a contradiction in the file names but the actual version should be 3.2.0.8. If that doesn't work then you may want to go back to an older version. In that case I would still load a newer version's zip file onto that card, so that if you do get the older version to boot you can use it to flash the newer version.
Before going back to older CWM versions though give this a try if the new CWM above doesn't work http://forum.xda-developers.com/showthread.php?t=958748
JP
Click to expand...
Click to collapse
This happened to me a couple of times on CM7. Don't know why, but I believe I used the last method listed to repair it. There was an older version of CWM that would cause this sometimes. When you get it going again, you must update CMW to the new one.
DigitalMD said:
This happened to me a couple of times on CM7. Don't know why, but I believe I used the last method listed to repair it. There was an older version of CWM that would cause this sometimes. When you get it going again, you must update CMW to the new one.
Click to expand...
Click to collapse
How did you get it to boot into CWM in the first place in order to flash? That is my current problem. Any method of fixing relies on the ability to boot into CWM from the SD card, which (for whatever reason) isn't working at the moment.
Well, tried to use the native Nook u-boot. Get the "Touch the Future of Reading" screen, then black, just like with any of the other cards. On the good nook, it boots into a linux file and runs the recovery script, so it is not the card reader or the SD card.
Well, still doesn't work. I guess I officially bricked it without even knowing what happened. Bummer.
czarofthefrozentundra said:
Well, still doesn't work. I guess I officially bricked it without even knowing what happened. Bummer.
Click to expand...
Click to collapse
You said you tried eyeballers 3.2.0.1 CWM. Did you mean the 1GB image file he posted on his thread? And how did you burn the image to the card? You should be using win32diskimager running in administrator mode on Windows. And it is best to use a cheap card reader rather than any card reader built into your PC. The nook can be really finicky about how the card is written.
leapinlar said:
You said you tried eyeballers 3.2.0.1 CWM. Did you mean the 1GB image file he posted on his thread? And how did you burn the image to the card? You should be using win32diskimager running in administrator mode on Windows. And it is best to use a cheap card reader rather than any card reader built into your PC. The nook can be really finicky about how the card is written.
Click to expand...
Click to collapse
Yes, I tried that image from his thread. I always use win32diskimager and use a card reader. I have working cards (I have a second NC that runs fine); there is just something wrong with the boot process, and I cannot get into CWR to fix it. It starts, but then never makes it in or reboots. Only time I can keep it from rebooting is by holding "n" and going into the boot option menu.
czarofthefrozentundra said:
Yes, I tried that image from his thread. I always use win32diskimager and use a card reader. I have working cards (I have a second NC that runs fine); there is just something wrong with the boot process, and I cannot get into CWR to fix it. It starts, but then never makes it in or reboots. Only time I can keep it from rebooting is by holding "n" and going into the boot option menu.
Click to expand...
Click to collapse
It goes to the boot menu when you hold n with eyeballers image burned to SD? What happens when you select SD and normal? Just a hang? With 'loading' showing?
Edit: I just thought of another reason that could be causing this. There is a flag set in /rom that tells the system to try to boot into recovery. It tries no matter what you tell it to do in the boot menu. ROM Manager uses that flag to boot to recovery when you tell it to. Then after you successfully get into recovery and exit it by telling CWM to reboot, CWM clears that flag. If your recovery is borked up, you never get that flag cleared and it's an endless loop.
There are two solutions I can think of. First, use racks dual boot SD that you already have and go into the boot menu with that. Tell it to go to SD and recovery. Hopefully his recovery will load. Then immediately exit by the menu. That should clear the flag. If that fixes it and it boots to CM7, go to ROM Manager and flash a new CWM to emmc.
If that does not fix it search xda for 'fix recovery'. There is a nook thread telling how to fix the recovery on emmc.
Edit2: I just thought of a third way to try to get it to boot. Take eyeballers 3.2.0.1 CWM SD and put it in your PC. There should be two files there named uImage and uRamdisk. Make a copy of them on the SD and rename the copies to uRecImg and uRecRam. Then put back in nook and reboot to see what you get.
Hmm. Thanks. I'll definitely give it a shot (got nothing to lose at this point). I'll get back and let you know if it worked or not.
czarofthefrozentundra said:
Hmm. Thanks. I'll definitely give it a shot (got nothing to lose at this point). I'll get back and let you know if it worked or not.
Click to expand...
Click to collapse
See my edit2 above for a third way to try to clear the flag.
Sent from my NookColor running ICS and Tapatalk
czarofthefrozentundra said:
Hmm. Thanks. I'll definitely give it a shot (got nothing to lose at this point). I'll get back and let you know if it worked or not.
Click to expand...
Click to collapse
Hello? Feedback?
Sent from my Nook Color running ICS and Tapatalk
Ha, I tried the quick reply function, and it didn't work. Here is what I wrote yesterday (verbatim, since I still had the window open):
"Well, so far no luck. Here is what I have tried, and the new information that I learned.
Used dual boot SD that I know works and booted into bootloader menu. Tried all different options on the SD card. What happens is that it thinks for a bit, then turns the screen black, but the boot screen never comes up (i.e. the Cyanogenmod logo that usually starts before things boot). So there must be some problem there.
If I hold down power, it will restart. Again, the screen turns black after the loading screen is on for a while (happens no matter which image I burned to the card).
I still need to try the other method (eyeballer one). I don't think the EMMC reset will work with my particular issue, as I had read that thread earlier."
czarofthefrozentundra said:
I still need to try the other method (eyeballer one).
Click to expand...
Click to collapse
If the problem is the recovery flag, the mods to the eyeballer CWM SD should work. If it does not work, it may be something else. If it does work you can flash a new CWM to emmc using another eyeballer zip. Get it here:
http://forum.xda-developers.com/showthread.php?p=21932561
You would want the first choice.
Sent from my Nook Color running ICS and Tapatalk
Cool. Will give it a try tonight and report back. Just have to find my spare SD card.
So, tried with the eyeballer, and I couldn't get it to work. One thing I did notice, though (actually by chance) is that even though the screen is black, the nook is on. I saw this because it all of the sudden started flashing the low battery screen and then turned off.
Anyhow, still looks like I am in the same position. The EMMC fix doesn't work for me because I cannot even boot of an SD card.
EDIT: Actually, I just reread your post. I didn't do it right. I am going to try again and report back.
EIDT 2: Nope, didn't work. Do I need to hold all the buttons down while booting or do something else special?
czarofthefrozentundra said:
So, tried with the eyeballer, and I couldn't get it to work. One thing I did notice, though (actually by chance) is that even though the screen is black, the nook is on. I saw this because it all of the sudden started flashing the low battery screen and then turned off.
Anyhow, still looks like I am in the same position. The EMMC fix doesn't work for me because I cannot even boot of an SD card.
EDIT: Actually, I just reread your post. I didn't do it right. I am going to try again and report back.
EIDT 2: Nope, didn't work. Do I need to hold all the buttons down while booting or do something else special?
Click to expand...
Click to collapse
I'm not sure what to tell you to do next. I guess I am going to send you to a post that tells pretty plainly how to do the 8 failed boots. I know you tried that, but timing is very critical with that procedure. Worth a try to me.
http://forum.xda-developers.com/showthread.php?p=25405429
How do you do the 8 failed boot deal with the cyanogenmod screen running. I am not sure about the timing of things. Also, which buttons? I have seen people do it with just the power button. Other places say with the power+n+vol up.
Hey guys,
Since I've had my Nook Color (installed CM7 as soon as I got it), I've never been able to connect to my wifi, I always thought it was my router's fault. The other day I got my girlfriend one, and installed cm9 on it for her. It connected to wifi straight away and browsed the internet with no problem. I thought maybe CM9 thus had a fix for wifi and installed it on mine, but alas, still no internet Has anyone had problems with their wifi on the Nook and been able to fix it? I REALLY want to connect, I just don't know what else I can do. Would messing with the partitions possibly cause this? It's definitely my Nook that is the problem, cause I did the EXACT same installation of CM9 on both of them, and only my wifi isn't working properly. Also, mine tends to freeze quite often on CM9, and hers does not?
ANY help will be really appreciated!!
Thanks,
Rudi
I
Guit4eva said:
Hey guys,
Since I've had my Nook Color (installed CM7 as soon as I got it), I've never been able to connect to my wifi, I always thought it was my router's fault. The other day I got my girlfriend one, and installed cm9 on it for her. It connected to wifi straight away and browsed the internet with no problem. I thought maybe CM9 thus had a fix for wifi and installed it on mine, but alas, still no internet Has anyone had problems with their wifi on the Nook and been able to fix it? I REALLY want to connect, I just don't know what else I can do. Would messing with the partitions possibly cause this? It's definitely my Nook that is the problem, cause I did the EXACT same installation of CM9 on both of them, and only my wifi isn't working properly. Also, mine tends to freeze quite often on CM9, and hers does not?
ANY help will be really appreciated!!
Thanks,
Rudi
Click to expand...
Click to collapse
See if you can go back to stock and set up wifi first, then install CM.
Look here for how to do it easily:
http://forum.xda-developers.com/showthread.php?p=25405429
Sent from my Nook Color running ICS and Tapatalk
I've got some new information:
1) If I triple boot using this method:
http://forum.xda-developers.com/showthread.php?t=1448186
Then my wifi works.
2) If I revert back to stock, then my wifi works.
3) BUT if I try to install to emmc using this method:
http://forum.xda-developers.com/showthread.php?t=1030227
Then it doesn't work??
Does that give any clues to why it isn't working? I really want to install Cm7 internally than on the SD card. Also, my girlfriend's nook runs CM9 smoothly, mine keeps freezing
Thanks for the help so far, really appreciate it!
Guit4eva said:
I've got some new information:
1) If I triple boot using this method:
http://forum.xda-developers.com/showthread.php?t=1448186
Then my wifi works.
2) If I revert back to stock, then my wifi works.
3) BUT if I try to install to emmc using this method:
http://forum.xda-developers.com/showthread.php?t=1030227
Then it doesn't work??
Does that give any clues to why it isn't working? I really want to install Cm7 internally than on the SD card. Also, my girlfriend's nook runs CM9 smoothly, mine keeps freezing
Thanks for the help so far, really appreciate it!
Click to expand...
Click to collapse
Are you doing a factory reset with your CWM card before you flash CM to emmc? The freezing makes it sound like your old data is carrying over.
Yea, I've done a few factory resets by holding in the n key when powering on. I've also cleared the Dalvik cache, /data and /system in Recovery.
Guit4eva said:
Yea, I've done a few factory resets by holding in the n key when powering on. I've also cleared the Dalvik cache, /data and /system in Recovery.
Click to expand...
Click to collapse
What version of CWM are you using to do the clearing of /data? You must use version 3.2.0.1 or newer or /data will not clear properly on the newer Nooks.
poesntr pugilism
I'm using 3.2.0.1
Guit4eva said:
I'm using 3.2.0.1
Click to expand...
Click to collapse
The reason the bootable cards are working is because they start with a clean /data. The reason stock works is because the /data is setup properly to run with stock. I still believe there is stuff carrying over in the /data on emmc. I don't know more to tell you other than to keep trying to clear /data on emmc with CWM. Watch for error messages when you do.
You are using the CWM on the bootable SD from the eyeballer thread aren't you? Not the one on the dual boot card or emmc?
aphiFnt jot
It's weird though, because I've been clearing it constantly for like 3 days trying to fix it. Maybe I need a later version of CWM? Where can one find the latest version?
The filename of the one I'm using at the moment is: "1gb_clockwork-3.2.0.1-eyeballer.img"
Guit4eva said:
It's weird though, because I've been clearing it constantly for like 3 days trying to fix it. Maybe I need a later version of CWM? Where can one find the latest version?
The filename of the one I'm using at the moment is: "1gb_clockwork-3.2.0.1-eyeballer.img"
Click to expand...
Click to collapse
Look at my tips thread in my signature. There is a link to version 5+ in there. Flash it to emmc and use that.
Thank you I'm going to download that now and try it, I will report back what happens
I'm still on the triple boot on SD (on which the wifi was working), but now when I turned the screen on from sleeping, the wifi isn't working anymore! It just goes "scanning....connectng...disconnected" and loops like that. I've tried forgetting the connection, and turning my wifi off and back on again, but it's still not working. What on earth is going on with my Nook??
Guit4eva said:
I'm still on the triple boot on SD (on which the wifi was working), but now when I turned the screen on from sleeping, the wifi isn't working anymore! It just goes "scanning....connectng...disconnected" and loops like that. I've tried forgetting the connection, and turning my wifi off and back on again, but it's still not working. What on earth is going on with my Nook??
Click to expand...
Click to collapse
CM9 tends to do that. Try CM7.... You know it may be your nook is defective somehow.
That IS with CM7 Flip, I hope it's not a problem with the actual Nook, cause there's 0% chance of getting another any time in the near future. It also often freaks out, as if it is getting many ghost touches. I have to turn off the screen fror a while to fix that. This is such a downer
ps, I can't seem to figure out how to use that new CWM. I'm used to making a bootable SD with the eyeballer IMG file, but this one is just a zip. How do I use it to make the bootable SD? Sorry if it's a dumb question, but I really don't understand
Guit4eva said:
ps, I can't seem to figure out how to use that new CWM. I'm used to making a bootable SD with the eyeballer IMG file, but this one is just a zip. How do I use it to make the bootable SD? Sorry if it's a dumb question, but I really don't understand
Click to expand...
Click to collapse
OK, that zip was meant for flashing to your emmc. If you want to use it in a bootable SD follow these instuctions. Put eyeballers SD in your PC. Unzip the downloaded racks CWM zip. There will be two files in the root, uRecImg and uRecRam. Copy those to the SD. On the SD will be two other files, uImage and uRamdisk. Rename those to .bak. Then rename uRecImg to uImage and uRecRam to uRamdisk. Now you can remove the SD and put in the nook and boot. You should now have the new 5+ CWM.
Thanks I'm still a bit confused though, don't you make a bootable CWM SD so that you can boot into CWM from the sd card and THEN flash CM7 or CM9 to your Nook? How would I flash CWM to emmc?
Guit4eva said:
Thanks I'm still a bit confused though, don't you make a bootable CWM SD so that you can boot into CWM from the sd card and THEN flash CM7 or CM9 to your Nook? How would I flash CWM to emmc?
Click to expand...
Click to collapse
Use the 3.2.0.1 card to flash the new Racks CWM. It will put it on emmc for use later. Then you can boot to it directly using the keys at boot time. It's been so long since I have used stock I can't remember the key combinations. Or you can flash CM7 to emmc with 3.2.0.1 and use the boot menu that comes with CM7 to boot to emmc recovery, which is now 5+. Then you can use that to wipe /data or flash new ROMs.
Hey again Last night I tried for quite a while to get that CWM5 to work, by making an eyeballer boot sd, then putting those two files in the CWM5 zip in place of the existing ones. But when I turn the Nook on, it just hangs at the CWM loading screen (with the 2 skulls)?
Hello,
I was running one of the CM9 nightlies and decided to try one of eyeballer's with OpenGL, and was able to make the switch without any problems, but after a while wanted to go to a non-openGL build and after flashing it my Nook won't boot past the loading screen.
I have a 1GB card with CMW which I'm able to boot to, I've tried wiping data, format boot and format system and reinstalling one of the builds that had previously worked, but still get stuck on Cyanoboot's loading screen. Even tried going back down to CM7 to see if that helped, but stuck on that loading screen as well.
What am I missing here? I've formatted boot, system, cache, data, everything, but the issue persists.
Any suggestions as to how I can make my Nook come back to live.
ryuz4ki said:
Hello,
I was running one of the CM9 nightlies and decided to try one of eyeballer's with OpenGL, and was able to make the switch without any problems, but after a while wanted to go to a non-openGL build and after flashing it my Nook won't boot past the loading screen.
I have a 1GB card with CMW which I'm able to boot to, I've tried wiping data, format boot and format system and reinstalling one of the builds that had previously worked, but still get stuck on Cyanoboot's loading screen. Even tried going back down to CM7 to see if that helped, but stuck on that loading screen as well.
What am I missing here? I've formatted boot, system, cache, data, everything, but the issue persists.
Any suggestions as to how I can make my Nook come back to live.
Click to expand...
Click to collapse
Well, for one thing, never format boot.
After trying cm7, you still get cyanoboot? It should have changed to the green cyanogenmod logo. If not then your flashes are not working.
Sent from my Nook Color running ICS and Tapatalk
After flashing CM7 I get the green boot screen, but my Nook also gets stuck on that loading screen.
When flashing CM9 I can press the ''N'' button and scroll the available boot methods, but when I choose one I get stuck on loading again.
So on both CMs I'm getting stucked on ''loading'', which started to happen on Monday after going from one of the openGL builds to the latest non-openGL build.
ryuz4ki said:
After flashing CM7 I get the green boot screen, but my Nook also gets stuck on that loading screen.
When flashing CM9 I can press the ''N'' button and scroll the available boot methods, but when I choose one I get stuck on loading again.
So on both CMs I'm getting stucked on ''loading'', which started to happen on Monday after going from one of the openGL builds to the latest non-openGL build.
Click to expand...
Click to collapse
Ok, that means that CWM is putting the boot files on the boot partition since they change CM7 vs CM9.
Which version is your CWM on the SD?
You can't boot to anything, not even emmc recovery? Or you just can't boot to 'normal'? Do you even have emmc recovery installed? If you don't, get the first file on this post and flash it with your CWM card. You may be in a recovery bootloop, without a recovery.
http://forum.xda-developers.com/showthread.php?p=21932561
Sent from my Nook Color running ICS and Tapatalk
Thank you leapinlar, seems like it was me having an old CWM on my boot card that wasn't helping me, installed the recovery zip and manage to boot into that from cyanoboot's loading screen and reflashed and managed to boot my Nook.
I'm still intrigue as to how this happened, do you think that when switching between openGL and non-openGL the boot partition got corrupted or something? I've been flashing many roms for almost a year and had never had this issue happen to me before.
Thanks a million for taking time to help me, you're a life saver.
ryuz4ki said:
Thank you leapinlar, seems like it was me having an old CWM on my boot card that wasn't helping me, installed the recovery zip and manage to boot into that from cyanoboot's loading screen and reflashed and managed to boot my Nook.
I'm still intrigue as to how this happened, do you think that when switching between openGL and non-openGL the boot partition got corrupted or something? I've been flashing many roms for almost a year and had never had this issue happen to me before.
Thanks a million for taking time to help me, you're a life saver.
Click to expand...
Click to collapse
It's possible your recovery somehow got corrupted during the flash. If that happens, it does not clear the recovery boot flag and it keeps trying to boot to recovery and it can't because it is corrupted. And it just bootloops forever.
Also, make sure your CWM bootable card is a recent version. If you have a newer nook and an old CWM and you try to clear data, it fails and you have a mess.
Hi, I am totally new at this but I been having a nook color for over a year now and been running CM7 on it for the longest time. Tonight I wanted to put CM9 on and for whatever I did now I just can't seem to get pass the Cyanoboot screen. Doesnt matter what I do it just gives me a blank screen and stays there. What do I gotta do to fix it or get rid of this cyanoboot and back to CWM so i can re flash everything. Any help would be great. Thanks
huyroy said:
Hi, I am totally new at this but I been having a nook color for over a year now and been running CM7 on it for the longest time. Tonight I wanted to put CM9 on and for whatever I did now I just can't seem to get pass the Cyanoboot screen. Doesnt matter what I do it just gives me a blank screen and stays there. What do I gotta do to fix it or get rid of this cyanoboot and back to CWM so i can re flash everything. Any help would be great. Thanks
Click to expand...
Click to collapse
Try flashing latest CM7 then CM9 over the top. Might want to format Data and wipe caches in between.
DizzyDen said:
Try flashing latest CM7 then CM9 over the top. Might want to format Data and wipe caches in between.
Click to expand...
Click to collapse
I cant flash anything right now. I cant go into CWM and it just stuck at the cyanoboot screen and whatever choice i pick from that screen will give me a blank screen.
huyroy said:
I cant flash anything right now. I cant go into CWM and it just stuck at the cyanoboot screen and whatever choice i pick from that screen will give me a blank screen.
Click to expand...
Click to collapse
Try using my bootable CWM card in my tips thread in my signature. It works fine under ordinary circumstances, but I have been wanting someone to try it to see if it gets you out of that bootloop.
Edit: Just a question out of curiosity. When you finished flashing that new ROM with your CWM, were you able to reboot from CWM normally using the menu choice? Or was there some lockup or something where you had to reboot from CWM by hard powering off?
leapinlar said:
Try using my bootable CWM card in my tips thread in my signature. It works fine under ordinary circumstances, but I have been wanting someone to try it to see if it gets you out of that bootloop.
Edit: Just a question out of curiosity. When you finished flashing that new ROM with your CWM, were you able to reboot from CWM normally using the menu choice? Or was there some lockup or something where you had to reboot from CWM by hard powering off?
Click to expand...
Click to collapse
I believe i had to powering off. I'm sorry but I didnt quite understand what you told me to do with the bootable CWM. I am fairly new to all this flashing ROMS crap. If u can explain it a lil bit better that would be greatly appreciated.
huyroy said:
I believe i had to powering off. I'm sorry but I didnt quite understand what you told me to do with the bootable CWM. I am fairly new to all this flashing ROMS crap. If u can explain it a lil bit better that would be greatly appreciated.
Click to expand...
Click to collapse
Just follow the directions in the thread to make the card. Then put it in the nook and try booting. If it boots to CWM, just use it to flash like DizzyDen said. And when you exit, use the menu to choose re-boot.
PS, the hard powering off caused the problem. CWM was not able to clear the recovery flag and you ended up in a recovery bootloop. Let me know if my card boots.
leapinlar said:
Just follow the directions in the thread to make the card. Then put it in the nook and try booting. If it boots to CWM, just use it to flash like DizzyDen said. And when you exit, use the menu to choose re-boot.
PS, the hard powering off caused the problem. CWM was not able to clear the recovery flag and you ended up in a recovery bootloop. Let me know if my card boots.
Click to expand...
Click to collapse
Ok I read the instruction, i know i gotta put the bootable CMW Recovery SD. you said the file is attached to the board... what board? where can i get this file? lol thanks
huyroy said:
Ok I read the instruction, i know i gotta put the bootable CMW Recovery SD. you said the file is attached to the board... what board? where can i get this file? lol thanks
Click to expand...
Click to collapse
Look at the link in my signature. If you read the instructions, scroll to the bottom. Attached to that post.
leapinlar said:
Look at the link in my signature. If you read the instructions, scroll to the bottom. Attached to that post.
Click to expand...
Click to collapse
I got it to work, thanks alot running 4.0.4 now. Slightly choppier than the CM7 I had on but whatever lol
huyroy said:
I got it to work, thanks alot running 4.0.4 now. Slightly choppier than the CM7 I had on but whatever lol
Click to expand...
Click to collapse
Thank YOU for testing my card and proving that gets you out of the recovery bootloop you were in.
You need to take one more step. You need to put a new CWM back on your internal memory so it is there ready for the next time you want to install a ROM. If you go back to my tips thread, there is a link to a new flashable CWM zip (version 5.5.0.4) that can be put on your internal memory. The link is in item B1. Just download that zip file, then boot one more time to my bootable CWM card and install that zip. You should not need my card anymore after that unless you get in a bootloop again.
I've had something similar going on. I believe my nook has been using the EMMC to boot. It was on CM7. I grabbed the latest open GL CM9 because I plan on giving this to my parents. I wanted them to be able to use the TWC TV/DVR app which only works on ICS. I am stuck in a loop where it keeps going to recovery and neither flashing cm9 again nor recovering to an old back up is working. Is the recovery SD card the suggested method for fixing this? I'm not stuck in a loop but I am stuck and having to go into recovery every boot.
For awhile, the N menu gave me both EMMC and SD card boot options. Now it only has EMMC ones.
NapalmDawn said:
I've had something similar going on. I believe my nook has been using the EMMC to boot. It was on CM7. I grabbed the latest open GL CM9 because I plan on giving this to my parents. I wanted them to be able to use the TWC TV/DVR app which only works on ICS. I am stuck in a loop where it keeps going to recovery and neither flashing cm9 again nor recovering to an old back up is working. Is the recovery SD card the suggested method for fixing this? I'm not stuck in a loop but I am stuck and having to go into recovery every boot.
For awhile, the N menu gave me both EMMC and SD card boot options. Now it only has EMMC ones.
Click to expand...
Click to collapse
You could try the new CWM SD. Just make sure when you finish using CWM to exit from that by using the 'reboot' choice in the menu. Do not just hard power off.
leapinlar said:
You could try the new CWM SD. Just make sure when you finish using CWM to exit from that by using the 'reboot' choice in the menu. Do not just hard power off.
Click to expand...
Click to collapse
So slap the image on a clean SD card and boot up from it. After it's done and I hit reboot, what would I do to get back to CM7 or CM9? I haven't had to do something like this yet. Any time I've had issues, I've been lucky enough to go back to a saved clockwork backup and restore things back to how they should be
NapalmDawn said:
So slap the image on a clean SD card and boot up from it. After it's done and I hit reboot, what would I do to get back to CM7 or CM9? I haven't had to do something like this yet. Any time I've had issues, I've been lucky enough to go back to a saved clockwork backup and restore things back to how they should be
Click to expand...
Click to collapse
First thing I would try is just to exit the new CWM via the menu to see if it gets you out of the bootloop. Retry booting without the SD in. If it will still only boot to recovery, I would again boot to my CWM and flash the new recovery to emmc. Next I would try to restore your old nandroid backup with the new CWM. If none of that works, flash a new CM to emmc with the new CWM.
I have a Nook Color that I've used for some time with CyanogenMod 10.2 with no problems. Last night I was looking at the fixes for Netflix since CM currently has a problem with it, and followed the instructions on XDS for the xposed installer (loading Liquid64's NetflixHackPersist.zip). Things appeared to go fine, and it booted into CM again and I ran the app as instructed. Everything seemed fine up to that point.
But on rebooting, the Nook will not go past the Cyanboot screen. Whether I let it boot by itself, or go to the boot menu and select any of the emmc or SD card options, it just sits there saying it's 'loading xxx' whatever option I've selected and never gets past it. I cannot find a way to force it to boot to the SD card to try anything that way.
I've tried 2 SD cards, reformatted and reburned an 8gb clockwork 3.0.2.8 image to make them bootable...so I don't think it's a card problem.
I'd appreciate some help if anyone knows a way around this. I've had experience with rooting and loading from the SD card, but if it always gets to Cyanoboot and I can't get it to even boot the SD card, I'm stuck. (The 8-reboots trick doesn't seem to work..I've likely reworked too much to still do that.)
Thanks,
JT
jttraverse said:
I have a Nook Color that I've used for some time with CyanogenMod 10.2 with no problems. Last night I was looking at the fixes for Netflix since CM currently has a problem with it, and followed the instructions on XDS for the xposed installer (loading Liquid64's NetflixHackPersist.zip). Things appeared to go fine, and it booted into CM again and I ran the app as instructed. Everything seemed fine up to that point.
But on rebooting, the Nook will not go past the Cyanboot screen. Whether I let it boot by itself, or go to the boot menu and select any of the emmc or SD card options, it just sits there saying it's 'loading xxx' whatever option I've selected and never gets past it. I cannot find a way to force it to boot to the SD card to try anything that way.
I've tried 2 SD cards, reformatted and reburned an 8gb clockwork 3.0.2.8 image to make them bootable...so I don't think it's a card problem.
I'd appreciate some help if anyone knows a way around this. I've had experience with rooting and loading from the SD card, but if it always gets to Cyanoboot and I can't get it to even boot the SD card, I'm stuck. (The 8-reboots trick doesn't seem to work..I've likely reworked too much to still do that.)
Thanks,
JT
Click to expand...
Click to collapse
Try using CWM 6.0.4.7.
hwong96 said:
Try using CWM 6.0.4.7.
Click to expand...
Click to collapse
Hallelujah! I followed your link and (though what I saw suggested trying CWM 5.5.04 for CM 10.2) it WORKED!! It booted to the SD card from Cyanboot, and I had a CM 10.2.1 zip that I was able to install and I'm back in business.
Out of curiosity, is Cyanoboot something unremovable, meaning I can never simply boot straight to an SD card as in the past? It did let me get to the recovery on this SD card, so I guess Cyanoboot was actually working and my problem was something else...but if I simply did a factory reset and wiped everything, would that have removed Cyanoboot as well?
If anyone has suggestions, I'm trying to decide if I'll keep this thing or sell it, so I'm curious what the most fully functional ROM (CM or ?) is considered to be these days, if I didn't put it back to stock?
I've loved this Nook, and only got into the earlier predicament because I thought, if I sold it, a buyer might want to use Netflix...so I was hoping to have it working with a ROM that would please the average Joe user who might hit up Youtube, Netflix, etc.
Thanks for the help!
JT
jttraverse said:
Hallelujah! I followed your link and (though what I saw suggested trying CWM 5.5.04 for CM 10.2) it WORKED!! It booted to the SD card from Cyanboot, and I had a CM 10.2.1 zip that I was able to install and I'm back in business.
Out of curiosity, is Cyanoboot something unremovable, meaning I can never simply boot straight to an SD card as in the past? It did let me get to the recovery on this SD card, so I guess Cyanoboot was actually working and my problem was something else...but if I simply did a factory reset and wiped everything, would that have removed Cyanoboot as well?
If anyone has suggestions, I'm trying to decide if I'll keep this thing or sell it, so I'm curious what the most fully functional ROM (CM or ?) is considered to be these days, if I didn't put it back to stock?
I've loved this Nook, and only got into the earlier predicament because I thought, if I sold it, a buyer might want to use Netflix...so I was hoping to have it working with a ROM that would please the average Joe user who might hit up Youtube, Netflix, etc.
Thanks for the help!
JT
Click to expand...
Click to collapse
If you installed CWM 6.0.4.7 to emmc and want to return to stock go to Leapinlar's tips item A12 on how to return to stock recovery. Or item A15 to flash BN stock recovery using CWM.
http://forum.xda-developers.com/showthread.php?p=25354258#post25354258