Database Users

[Q] Maximum protection cases for Defy?

One of the main reasons I picked the defy was it's ruggedness, because I do potentially dangerous sports, but obviously there are limits to that ruggedness, and if you take a fall or something likely to break the phone, it may well have broken you - and a working phone comes in kind of handy at that point
So... with that in mind, can anyone recommend any decent hard cases? I thinking more along the lines of a hard pouch you slip it into, but may consider flip open ones or something that allows easy access to the touchscreen if it is tough enough.
Waterproofing not really an issue since the defy should be able to handle any streams or such I may fall into anyway.

evilc said:
One of the main reasons I picked the defy was it's ruggedness, because I do potentially dangerous sports, but obviously there are limits to that ruggedness, and if you take a fall or something likely to break the phone, it may well have broken you - and a working phone comes in kind of handy at that point
So... with that in mind, can anyone recommend any decent hard cases? I thinking more along the lines of a hard pouch you slip it into, but may consider flip open ones or something that allows easy access to the touchscreen if it is tough enough.
Waterproofing not really an issue since the defy should be able to handle any streams or such I may fall into anyway.
Click to expand...
Click to collapse
Otterbox Commuter Case

Agreed on the Commuter Series. I expect although that it is going to make the phone much phatter than that it already is.
I work as an audio engineer at some places (school, local bars), which means I carry lots and lots of big flightcases. And I've to be kept in the loop. My last phone, an LG KS-20 died this way. As I was carrying a big flightcase, a corner tapped the LCD through my jeans, destroying it. So many appointments and numbers lost!
Note: I haven't got my Defy yet, I'm working things out on getting it.

i'm selling mine. dont like my phone being so bulky because i always put it in my pants pocket.
if you're interested, pm me.

I was using one of these http://www.amazon.co.uk/Amzer-Silic...2OI6/ref=sr_1_8?ie=UTF8&qid=1303117510&sr=8-8 but it added too much bulk and it wasn't a particularly good fit even if it did offer decent protection.
I now use one of these http://www.amazon.co.uk/iTALKonline...5F3S/ref=sr_1_1?ie=UTF8&qid=1303117510&sr=8-1 and it is a good tight fit and it doesn't bulk the phone up very much at all, my defy certainly feels better in my hand now being a bit heavier and a bit grippier, with this case i can slip it in and out of my jeans pocket without it getting stuck as well.

yea i use otterbox. i don't mind the bulky feel

There is a really nice two-piece alternative from case mate. I use it and I can't complain.

makakam said:
There is a really nice two-piece alternative from case mate. I use it and I can't complain.
Click to expand...
Click to collapse
can we have some pictures and for how much did you get this case?

I bought it for about 20 pounds.
http://img861.imageshack.us/img861/2108/defy20hybrid.jpg
http://img836.imageshack.us/img836/3786/defy20hybrid4.jpg

I ordered a few cases from China in eBay, but don't know now if they will have good fits for the micro usb slot and the earphone slot...
Kinda thinking about the Ottebox one, but ah, if it's so bulky.
Only problem about China is that it takes a while to arrive. Will post about it when they arrive.
Cheers,
Andrew

I want to use a special case, but i'm wandering if it has some problems with cooling this way. If i play Dungeon Defenders for example, the phone gets pretty hot, and with a case i'm afraid it will get even hotter, because i'm not sure how the heat will be transfered.

I got a tpu case from ebay and some silicon ones.
The tpu is great but the silicon were really hard to get in and out of the pocket.
I recommend the tpu with a red thing on the back, which you can rip out and it slides well and also fits very well on tue device.
Cheers,
Andrew
Sent from my MB525 using XDA Premium App

otterbox - but honestly: what for? Ist'n the DEFY tough enough for you;-)

Andrew-droid said:
I got a tpu case from ebay and some silicon ones.
The tpu is great but the silicon were really hard to get in and out of the pocket.
I recommend the tpu with a red thing on the back, which you can rip out and it slides well and also fits very well on tue device.
Cheers,
Andrew
Sent from my MB525 using XDA Premium App
Click to expand...
Click to collapse
Can you post a link of that TPU case?

DEFYdepp said:
otterbox - but honestly: what for? Ist'n the DEFY tough enough for you;-)
Click to expand...
Click to collapse
got the otterbox as well
it's nice to have cause i dont think the defy will resist falling onto the street, when biking...^^ the case will give it more toughness =))

I've had the Ottterbox case for months now. Everytime I take the case off for some reason it drives me nuts now because the phone just feels too small. I work in a precast concrete plant and end up getting pretty dirty by the end of the day. Thankfully this phone stays a lot cleaner now then other phones I had that I didn't have the Otterbox case.

Do not buy the acer case!

The morons at Acer designed a case that covers up the microphone (if the mic is truly where other posters have said - located between the screen and the bexel on the upper side!

I will make a little hole for it, since still less modding than trying to fit another case to the A500. Silly miss, none the less.

Might want to be sure about things before you make a bold statement about not buying the case. I'm sitting here with my case on, sitting 3 feet from the mic, in a normal voice said a sentence and it picked up every word clearly and I don't' even have the personalized Google voice recognition on.

I like it, the only thing that I really need to modify on the case is that it is extremely tight, and it covers up the micro SD card slot, so I have to cut the case open where the slot is. It's really difficult to push out of the case so I feel like I'm going to break it one of these times to change the SD card. Other than that it's put together very well.

silic0re said:
I like it, the only thing that I really need to modify on the case is that it is extremely tight, and it covers up the micro SD card slot, so I have to cut the case open where the slot is. It's really difficult to push out of the case so I feel like I'm going to break it one of these times to change the SD card. Other than that it's put together very well.
Click to expand...
Click to collapse
I had a very hard time getting the sdcard in, then out when i realized it needed to be formatted first.. I thought the Nook Color was hard to get in. Thats easy compared to this, but until they make other cases, we dont really have a choice.

PDair has made a case now. Expensive but it looks good on the pictures.
http://www.pdair.com/catalog/index.php?cPath=11000659_11001240_11001241

docfreed said:
The morons at Acer designed a case that covers up the microphone (if the mic is truly where other posters have said - located between the screen and the bexel on the upper side!
Click to expand...
Click to collapse
I'm on the hunt for a case or cover, so big thanks for the info. I don't want to drop $120 for the pdair one right now either, so the hunt continues...

The only problem I've had with the Acer case is that the device slowly slides out of the bottom because of the orientation, but it's a terribly easy fix.
Mic and everything else have been fine.
Also, smells bad. I'm bringing it around a lot to try and force the smell out.

jai134 said:
PDair has made a case now. Expensive but it looks good on the pictures.
http://www.pdair.com/catalog/index.php?cPath=11000659_11001240_11001241
Click to expand...
Click to collapse
Expensive is an understatement... $119?
Give it a few weeks and we will have some Chinese knock-offs that will be better made than the Acer one at half the price.
The Acer case is a nice design; I like the fact that it's thin, tight, with a built-in stand, but it feels like it's made out of some terribly cheap material. I don't expect it to last a long time. A case just like it with better materials and magnetic closure will be a winner for sure.

rorytmeadows said:
The only problem I've had with the Acer case is that the device slowly slides out of the bottom because of the orientation, but it's a terribly easy fix.
Mic and everything else have been fine.
Also, smells bad. I'm bringing it around a lot to try and force the smell out.
Click to expand...
Click to collapse
What was your fix for the sliding? I like the case a lot, but the sliding is a peeve...
Simon

http://forum.xda-developers.com/showpost.php?p=14423744&postcount=14
Sent from my A500 using XDA Premium App

No issues here the sliding Is annoying but easy to deal with. Got mine for 39.99
Sent from my A500 using XDA Premium App

The ony issue I found to avoid sliding is to invert the use of the tab (cover on the top).

just so you guys know roo case is coming out with some cases that actually look very nice
http://www.amazon.com/rooCASE-Execu...IV6E/ref=sr_1_4?ie=UTF8&qid=1308375584&sr=8-4
This is the one i'm waiting for

yakafaucon said:
The ony issue I found to avoid sliding is to invert the use of the tab (cover on the top).
Click to expand...
Click to collapse
That's what i did also, some apps dont like it but generally its ok.. The smell is funny though.
I bring it around and people are like, what the hell is that smell... (it's new electronics...)

for me the biggest gripe is how hard it is to get the tablet out 9f the case. to the point that i'm scared of damaging the screen of the tablet by pressing it too hard to take it off the case :/
the second one would be the smell

Does anybody know EXACLTY where the recording mic is?
I plan to do some 'Rocket Surgery' to access the mike and the MicroSD card slot.

docfreed said:
The morons at Acer designed a case that covers up the microphone (if the mic is truly where other posters have said - located between the screen and the bexel on the upper side!
Click to expand...
Click to collapse
Well they DID copy the Apple case from the iPad I believe.....

yakafaucon said:
The ony issue I found to avoid sliding is to invert the use of the tab (cover on the top).
Click to expand...
Click to collapse
I used a piece of 3M double sided tape, they kind they sell for the various wall hooks that can be removed. It isn't perfect but it seems to have made a fair improvement dealing with the sliding.
I'm going to try the TPD case as well, since I ordered it before I tried the double sided tape, so we'll see where I finally settle.

Bad smell fix
I agree the smell of the case hits you like a ton of bricks at first - and the Acer case is a dust magnet.
Simple fix - wipe the entire case down with a warm wet sponge. No longer picks up every piece of dust / dirt it encounters and the smell dramatically decreases. The smell also goes completely away after a week or so.
Still looking for a good case with a potrait stand as I have a couple of apps that require it or just look better that way. Anyone got a tip for me?

TPD Gear Black Executive Case [updated with pictures!]

http://cgi.ebay.com/Black-Executive...I&otn=2&po=LVI&ps=63&clkid=787021242547809834
I just ordered one of these on ebay from TPD Gear. It should come in a couple days and I'll post a review. This one looks promising, if its similar to the Senyx one I bought but with clips instead of straps.
Here's my quick and dirty review and some photos (see posts 9 and 10):
http://forum.xda-developers.com/showpost.php?p=14993709&postcount=9
http://forum.xda-developers.com/showpost.php?p=14993709&postcount=10

I just ordered one of these on ebay from TPD Gear. It should come in a couple days and I'll post a review. This one looks promising, if its similar to the Senyx one I bought but with clips instead of straps.[/QUOTE]
Actually looks like a good economical option. Do chime in when you get yours.
Does anyone else have one of these???

i was looking into this one as well. looking forward to the review

Mine should be here shortly:
timehunter said:
Okay, I fess up. I got tired of the slippage issue with the official Acer case. I can literally with a few gentle shakes get my A500 free of the case now. Therefore I ordered the TPD case. It looks like it will be the least bulky of the choices.
But I still state my version of the dream case would be the union of thinness of the Acer to the lock tab tray of the TPD.
Click to expand...
Click to collapse

timehunter said:
Mine should be here shortly:
Click to expand...
Click to collapse
+1 exactly, let us know how you like it....

tracking says i'll get it tomorrow. i'll try to get some pictures of it tomorrow evening PST after my softball game.

I just ordered one of these today also. Can't wait to check it out. From the pics it looks like the best one to come out

minotauri said:
tracking says i'll get it tomorrow. i'll try to get some pictures of it tomorrow evening PST after my softball game.
Click to expand...
Click to collapse
You'd better hurry. My tracking says tomorrow, Thursday, and I'm posting if no one beats me to it.

First set of photos.
So I just got the case tonight, so this is more or less a first impression of it.
First thing I noticed is that its bulkier than my Senyx folio case, but a little more compact. It's actually really close to the dimensions of the A500, so there's not a lot of edge margin along the perimeter of the case and the tablet itself, as there is on the other case. That said, if you look at my second set of photos on the next post, you'll see that with the tablet in the Senyx case, its really close the same thickness as the TPD case.
The material looks good, and has very little odor, which I imagine will go away like it did on my other case. The stand function is quite functional and very well designed, as it doesnt fold in on itself like other cases do, so structurally the case doesnt really bend too easily. The one gripe I can forsee is that the slots that hold the tablet when in stand mode may slip over time, but we'll see.
An elastic band binds the case together when its being transported, as you can see in the second set of photos. This works well enough, and keeps the profile very flat.
Now, on to the main reason I bought this -- the clips that hold the Tablet in. I really do not like the pouch-design that the other cases use because the tablet can slip fairly easily in it. The Senyx case uses straps along the corners and I've noticed that these straps have stretched already in the 2.5 weeks I've used it so it also does slip sometimes. These clips work wonderfully. They feel like they have some rubber material coated on them so it would help alleviate scratching to the tablet, but it was a bit difficult to put on at first and to take off. I think you are suppose to slide it in from the bottom.
The clips DO block the SD slot slightly!!!! It's just a tad too long, and it blocks the very end of the port making it, so far, not able to open while attached to the clips.
As far as weight goes, its a little bulkier as I mentioned because of an added layer which acts as the rear leg in kickstand mode, and this adds roughly 0.40 lbs when compared to the Senyx case. Both of these are heavier than the Acer OEM case.
--added one more thing-- I just noticed that in kickstand mode, there's speaker cutouts hidden under the kickstand in folio mode. Pretty awesome
OK -- sorry this was quick and dirty.
So far so good though!

second set of photos -- the last couple are the Senyx folio case. Also a nice pick.

Looks nice, but also looks like it adds a fair bit of bulk, thought not as much as the Targus model.
The Acer case isn't perfect, but is low impact on the foot print.
Your thoughts?

timehunter said:
Looks nice, but also looks like it adds a fair bit of bulk, thought not as much as the Targus model.
The Acer case isn't perfect, but is low impact on the foot print.
Your thoughts?
Click to expand...
Click to collapse
I just wrote a quick write-up on it in post 9.
I had the Acer case and I hated it. It's very slim, but I couldnt stand it as I felt it degraded the overall look and quality of my tablet. This case is definitely a lot bulkier then the Acer case and the Senyx case. I like the clips though -- The Senyx case with clips would be ideal for me, since I do not care for the kickstand function as much -- I have the Arkon stand already.

Im more interested if you took these pics and did this write-up while "breaking bread with the porcelin god".
Sent from my A500 using Tapatalk

deathbysnoosnoo said:
Im more interested if you took these pics and did this write-up while "breaking bread with the porcelin god".
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
lol. it was the brightest area i could find to take pics quickly near my room.

didnt even notice the toilet....haha. thanks for the w/u and pics.
this case its tops on my list so far....

Got my TPD case today. It has very good contruction quality. It looks great and in the scope of its design it works very well as intended.
Since the components are all synthetic materials, it has an odor to it when brand new. That was easily dealt with, though, by a healthy dose of fabric freshener.
I love the plastic holder tray that is sewn into the case. It holds the device in place with a snap (pun intended) of authority and allows a nice view of the shiny toy it cradles so well. As mentioned in previous comments, the top bracket tab overlaps the SD card slot door. However, I don't see that as a show stopper. Unless you are using multiple SD cards to manage media, you won't need to bother with it much. I feel that if needed, the tab could be modified without any real impact to it's retention ability.
Other than that matter, the holder tray allows full access to all other ports and switches with no troubles.
I am not enamored of the extra bulk the case adds. But practically every case of this type has that issue to one degree or another. The Iconia already has significant thickness and this case adds to that in full measure. I'll take a few days with the case to see if I can live with it.
The case also makes the Iconia less comfortable to hold in portrait, at least to me. I do use it in portrait quite a bit, almost as much as landscape, but I'm willing to admit my use scenario is different from others. After all, all these tablets are designed primarily for landscape, so there you go. In landscape, especially when using it in easel mode, it is terrific.
In summary, it may not be perfect, but it is a very good option if you are looking for an executive folio type case that is also a landscape easel stand.

timehunter said:
So I tried the TPD for a few days. Its good, but the bulk and added weight was too much for me. I suspect the same for the Targus model. I'm back to the Acer case with some 3M Command double sided stickies to keep it in place.
Click to expand...
Click to collapse
Here's the update.

Anybody think like me, that by the time we have all bought multiple cases to try them out, and then discard them because they have a fault or two, we could have just stumped up the shocking price of the pdair case and had done with it

markteacher said:
Anybody think like me, that by the time we have all bought multiple cases to try them out, and then discard them because they have a fault or two, we could have just stumped up the shocking price of the pdair case and had done with it
Click to expand...
Click to collapse
lol ya. i was able to return the acer case at least. but i do have two cases now. luckily my co-worker might be getting one of these tablets so i might sell it to him for a reduced price.
the TPD case is a bit heavy, but im starting to like it alot. there are times when i take the tablet out of the case when im going to be holding it for long periods of time, but it works great on the table or on my lap.

just got in my case today.... It is a little bulky, but exactly what i was looking for

[Q] Does anyone have the leather pouch?

I love the look of the Galaxy Tab 10.1, and I take good care of my stuff so I don;t really need a think and bulky case. I saw the leather pouch on their webite, and thought it was perfect, since I just need something to protect it from bumps and scratches while carrying it.
Has anyone seen this, used it, had a hands-on with it? Does anyone own it?
Are there cheaper 3rd party ones?
Edit: This forum will not let me link to the pouch, but it is $29.99.

I had the book cover case on order but I ended up canceling it. I found a belkin case at best buy for $45 its thin doesnt add much bulk at all and it it folds into a stand. I just wanted something thin and easy to protect the screen. I'm not worried about dropping it.
I dont have the name or model number I left the box on my desk at work. I'll update later with the info. I couldnt find it on the belkin website or besbuy.
Funny thing the best buy employees didnt even know they had it when I went in last friday.

I bought the leather one that was right next to that one and I do not think it adds a lot of bulk to it but it def protects it and thats what is most important to me.
sgtmoody said:
I had the book cover case on order but I ended up canceling it. I found a belkin case at best buy for $45 its thin doesnt add much bulk at all and it it folds into a stand. I just wanted something thin and easy to protect the screen. I'm not worried about dropping it.
I dont have the name or model number I left the box on my desk at work. I'll update later with the info. I couldnt find it on the belkin website or besbuy.
Funny thing the best buy employees didnt even know they had it when I went in last friday.
Click to expand...
Click to collapse

galaxytabevo said:
I love the look of the Galaxy Tab 10.1, and I take good care of my stuff so I don;t really need a think and bulky case. I saw the leather pouch on their webite, and thought it was perfect, since I just need something to protect it from bumps and scratches while carrying it.
Has anyone seen this, used it, had a hands-on with it? Does anyone own it?
Are there cheaper 3rd party ones?
Edit: This forum will not let me link to the pouch, but it is $29.99.
Click to expand...
Click to collapse
Yep, I'm with you, I didn't want anything too bulky with so many flaps, etc.
I'm glad I bought the pouch. It's perfect and it's a tight fit. Just to test how tight it is, I held it upside down with the opening side down and the Tab didn't slide out at all.

I got the pouch, it was free since I was one of the first 200 at the launch on the 8th. I use it daily but I will be swapping it most likely for the book case by samsung when I can get it a bit easier.......I have a belkin leather one that is still unopened lol idk it seems a bit bulky

I have the Belkin folio stand. I only bought it because of convenience. My cat nearly jumped on to my tablet while it was laying on the couch, so I wanted something to protect it (and the Samsung case isn't available yet).
The fit is very snug, and it folds up to various viewing angles. It has a nice elastic strap that can be pulled around to hold it shut.
It is a _little_ bulky. The selling point on this tablet is the weight and thickness. That being said, the case weighs almost as much as the tablet. So, don't get it if weight is important to you.
Overall it's pretty nice. Probably a bit overpriced. When people want to play with the tab though, I always take it out of the case. It's so much prettier without it .

The Samsung Book Cover case just shipped and should be here by week's end. I'll keep you posted on it. Personally, I don't like anything that I have to keep pulling it out and pushing it in. I feel it's a matter of time before a scratch occurs.

Please do, I have belkin one and just don't love it. The Samsung one is back ordered again, and would like your impressions on it.
akarol said:
The Samsung Book Cover case just shipped and should be here by week's end. I'll keep you posted on it. Personally, I don't like anything that I have to keep pulling it out and pushing it in. I feel it's a matter of time before a scratch occurs.
Click to expand...
Click to collapse

Thanks for information on the cases, but I don't want a case anymore. I'd rather have a nice pouch or neoprene sleeve that will protect it from scuffs of traveling.
The thing is I don't want to spend $30 for a sleeve. I just want a nice sleeve that I can carry the Tab in, without breaking the bank. It doesn't have to be an "official" sleeve, as long as it fits, I don't care.

akarol said:
The Samsung Book Cover case just shipped and should be here by week's end. I'll keep you posted on it. Personally, I don't like anything that I have to keep pulling it out and pushing it in. I feel it's a matter of time before a scratch occurs.
Click to expand...
Click to collapse
yea I agree with your statement especially since I use the keyboard and media dock. they wont fit with any case what so ever.......I even tried to take the docking station part off again like the directions say to make more room but was still unable to do so lol

I have the suede pouch from sfbags.co
Originally for the replaced Xoom, it is a tight fit but works great.
They have a great service.

evb1 said:
I have the suede pouch from sfbags.co
Originally for the replaced Xoom, it is a tight fit but works great.
They have a great service.
Click to expand...
Click to collapse
Since the Tab is longer than the XOOM, does it pop out more? How durable is the sleeve?

Blurex slim case

Hey I just ordered the Blurex slim case off of amazon this past weekend and just received it yesterday. All I can say is this is exactly what I'he been waiting for. All ports/slots are accessible and very secure and slim fit. This is my second case. I originally bought the Targuss case and found it too bulky. Check it out you won't be disappointed. I would post a link, but because this is only my third posting, I am not allowed.

You mean this one I think: http://www.amazon.com/BLUREX-Leathe...1?s=electronics&ie=UTF8&qid=1311197031&sr=1-1
Looks to be exactly what I would want from a case, but can't find it anywhere in the EU region as always

Yes that's it. And I got it for $ 19.99 us currency. $25 shipped to my door.

Wow, they brought the price up already. I just got it for 33.00 out the door. It looks like what I have been looking for. In the review, besides the slimness, the reviewer mentioned folding the cover back and holding the Acer like a book. That was my only complaint over the roocase I have now. If this cover is what i hope it to be, I will be returning the roocase.

Is it available on ebay??
Sent from my XT720 using XDA App

vari9 said:
Is it available on ebay??
Sent from my XT720 using XDA App
Click to expand...
Click to collapse
http://ebay.com

LostRealist said:
http://ebay.com
Click to expand...
Click to collapse
I couldn't find it on ebay that's why I asked.....(P.S iknow what's ebay's url)
Sent from my XT720 using XDA App

You can flip it vertically like a book.

So I like this case and proceeded to checkout and they tell me that the item won't ship to Canada !!
Bought stuff from there ( amazon.com ) before and shipped no problem...which tells me that this item might be ship from somewhere else with Canada being one of the restriction.

Just confirming that this is the one:
http://amzn.to/qsUhDq -- BLUREX Leather Slim folio Case With Multi-Angle Stand for ACER ICONIA TAB A500
And yes, it's just as amazing as described.
It feels really solid, looks gorgeous and very professional. It's exactly the type of case I was looking for.
The inside felt is very nice. All ports/mic/camera is accessible.
Please let me know if you'd like photos of anything specific on the case.

jm77 said:
Just confirming that this is the one:
http://amzn.to/qsUhDq -- BLUREX Leather Slim folio Case With Multi-Angle Stand for ACER ICONIA TAB A500
And yes, it's just as amazing as described.
It feels really solid, looks gorgeous and very professional. It's exactly the type of case I was looking for.
The inside felt is very nice. All ports/mic/camera is accessible.
Please let me know if you'd like photos of anything specific on the case.
Click to expand...
Click to collapse
Does it ship to india??...if yes can you tell me the shipping charges.....
P.S. never bought anything from amazon so not registered there.....if anyone could help me out?
Sent from my XT720 using XDA App

As far as I can tell it does not ship outside of the U.S. Big shame because this looks like the best case so far =/

To the folks who have it, when you flip the cover all the way back to "hold it like a book" as the reviewer in Amazon states, it probably covers the speakers right? How well can you hear thru it when it is put in that position?
Thanks!

Can anyone from us buy one for me and then ship it to india??
Sent from my XT720 using XDA App

Quick question. I got this case a couple of days ago. I really like how its shaped. It conforms to the curves of the tablet exactly. All the ports are accessible including the SD card port. I have two issues though and tell me if you agree. Since I saw the post and pictures of the guy who dropped his and got it smashed up, this case doesn't protect the corners very well from a drop if the case falls and lands on the corners. Also the tab that clips on to the tablet to close the case doesn't wrap around the bevel of the case completely. It keeps the case closed, but it looks like it barely is. Im wondering if this where loosen over time and use. Other than that, I really like the case. Especially the quality of build and how thin it is. Check out the pictures and you can see what I mean about the corners.

Florida Anvel said:
Quick question. I got this case a couple of days ago. I really like how its shaped. It conforms to the curves of the tablet exactly. All the ports are accessible including the SD card port. I have two issues though and tell me if you agree. Since I saw the post and pictures of the guy who dropped his and got it smashed up, this case doesn't protect the corners very well from a drop if the case falls and lands on the corners. Also the tab that clips on to the tablet to close the case doesn't wrap around the bevel of the case completely. It keeps the case closed, but it looks like it barely is. Im wondering if this where loosen over time and use. Other than that, I really like the case. Especially the quality of build and how thin it is. Check out the pictures and you can see what I mean about the corners.
Click to expand...
Click to collapse
Place a thick foam band on the sides....stick it to one flap on the side so you have no problem opening it....
Sent from my XT720 using XDA App

Just received this case today for my wifes tab. Overall it is a very nice case, with great build quality. It is thin, with a low profile unlike the Targus leather case sold at BB. My only complaint is that in order to position the screen into one of the viewing angles, the tab must be pushed out of the bottom tab holders. It's not a big deal, but I did find myself fumbling with it slightly.

@[email protected] You can use service like http: // www . usunlocked . com but is little bit expensive...

shanksv said:
To the folks who have it, when you flip the cover all the way back to "hold it like a book" as the reviewer in Amazon states, it probably covers the speakers right? How well can you hear thru it when it is put in that position?
Thanks!
Click to expand...
Click to collapse
I just got mine today and yes, holding it in that position would cover the speakers. If you can imagine holding a thick piece of leather over the speaker, that's how it would sound.
If that doesn't bother you then I highly recommend this case. I've owned the Acer one and I have a gtablet with a cover and this one is hands down better than those and others I have seen so far. The case is very snug. As a matter of fact I had difficulty putting it on as well as taking it off. I can't imagine mt tab ever falling out of it accidently even though the tabs that hold it in are so small.
It's also very slim profile. Doesn't add much bulk to the tablet. Also, if this is fake leather, they've done a pretty good job as I can't tell.

3pod said:
I just got mine today and yes, holding it in that position would cover the speakers. If you can imagine holding a thick piece of leather over the speaker, that's how it would sound.
If that doesn't bother you then I highly recommend this case. I've owned the Acer one and I have a gtablet with a cover and this one is hands down better than those and others I have seen so far. The case is very snug. As a matter of fact I had difficulty putting it on as well as taking it off. I can't imagine mt tab ever falling out of it accidently even though the tabs that hold it in are so small.
It's also very slim profile. Doesn't add much bulk to the tablet. Also, if this is fake leather, they've done a pretty good job as I can't tell.
Click to expand...
Click to collapse
thanks for the info, can't wait to get mine. ordered two days ago and still has not shipped.
Edit: got email from Amazon today said will ship soon, 1/2 hour later UPS delivered it. Amazon site still says waiting to ship.
Sent from my A500 using XDA Premium App