The morons at Acer designed a case that covers up the microphone (if the mic is truly where other posters have said - located between the screen and the bexel on the upper side!
I will make a little hole for it, since still less modding than trying to fit another case to the A500. Silly miss, none the less.
Might want to be sure about things before you make a bold statement about not buying the case. I'm sitting here with my case on, sitting 3 feet from the mic, in a normal voice said a sentence and it picked up every word clearly and I don't' even have the personalized Google voice recognition on.
I like it, the only thing that I really need to modify on the case is that it is extremely tight, and it covers up the micro SD card slot, so I have to cut the case open where the slot is. It's really difficult to push out of the case so I feel like I'm going to break it one of these times to change the SD card. Other than that it's put together very well.
silic0re said:
I like it, the only thing that I really need to modify on the case is that it is extremely tight, and it covers up the micro SD card slot, so I have to cut the case open where the slot is. It's really difficult to push out of the case so I feel like I'm going to break it one of these times to change the SD card. Other than that it's put together very well.
Click to expand...
Click to collapse
I had a very hard time getting the sdcard in, then out when i realized it needed to be formatted first.. I thought the Nook Color was hard to get in. Thats easy compared to this, but until they make other cases, we dont really have a choice.
PDair has made a case now. Expensive but it looks good on the pictures.
http://www.pdair.com/catalog/index.php?cPath=11000659_11001240_11001241
docfreed said:
The morons at Acer designed a case that covers up the microphone (if the mic is truly where other posters have said - located between the screen and the bexel on the upper side!
Click to expand...
Click to collapse
I'm on the hunt for a case or cover, so big thanks for the info. I don't want to drop $120 for the pdair one right now either, so the hunt continues...
The only problem I've had with the Acer case is that the device slowly slides out of the bottom because of the orientation, but it's a terribly easy fix.
Mic and everything else have been fine.
Also, smells bad. I'm bringing it around a lot to try and force the smell out.
jai134 said:
PDair has made a case now. Expensive but it looks good on the pictures.
http://www.pdair.com/catalog/index.php?cPath=11000659_11001240_11001241
Click to expand...
Click to collapse
Expensive is an understatement... $119?
Give it a few weeks and we will have some Chinese knock-offs that will be better made than the Acer one at half the price.
The Acer case is a nice design; I like the fact that it's thin, tight, with a built-in stand, but it feels like it's made out of some terribly cheap material. I don't expect it to last a long time. A case just like it with better materials and magnetic closure will be a winner for sure.
rorytmeadows said:
The only problem I've had with the Acer case is that the device slowly slides out of the bottom because of the orientation, but it's a terribly easy fix.
Mic and everything else have been fine.
Also, smells bad. I'm bringing it around a lot to try and force the smell out.
Click to expand...
Click to collapse
What was your fix for the sliding? I like the case a lot, but the sliding is a peeve...
Simon
http://forum.xda-developers.com/showpost.php?p=14423744&postcount=14
Sent from my A500 using XDA Premium App
No issues here the sliding Is annoying but easy to deal with. Got mine for 39.99
Sent from my A500 using XDA Premium App
The ony issue I found to avoid sliding is to invert the use of the tab (cover on the top).
just so you guys know roo case is coming out with some cases that actually look very nice
http://www.amazon.com/rooCASE-Execu...IV6E/ref=sr_1_4?ie=UTF8&qid=1308375584&sr=8-4
This is the one i'm waiting for
yakafaucon said:
The ony issue I found to avoid sliding is to invert the use of the tab (cover on the top).
Click to expand...
Click to collapse
That's what i did also, some apps dont like it but generally its ok.. The smell is funny though.
I bring it around and people are like, what the hell is that smell... (it's new electronics...)
for me the biggest gripe is how hard it is to get the tablet out 9f the case. to the point that i'm scared of damaging the screen of the tablet by pressing it too hard to take it off the case :/
the second one would be the smell
Does anybody know EXACLTY where the recording mic is?
I plan to do some 'Rocket Surgery' to access the mike and the MicroSD card slot.
docfreed said:
The morons at Acer designed a case that covers up the microphone (if the mic is truly where other posters have said - located between the screen and the bexel on the upper side!
Click to expand...
Click to collapse
Well they DID copy the Apple case from the iPad I believe.....
yakafaucon said:
The ony issue I found to avoid sliding is to invert the use of the tab (cover on the top).
Click to expand...
Click to collapse
I used a piece of 3M double sided tape, they kind they sell for the various wall hooks that can be removed. It isn't perfect but it seems to have made a fair improvement dealing with the sliding.
I'm going to try the TPD case as well, since I ordered it before I tried the double sided tape, so we'll see where I finally settle.
Bad smell fix
I agree the smell of the case hits you like a ton of bricks at first - and the Acer case is a dust magnet.
Simple fix - wipe the entire case down with a warm wet sponge. No longer picks up every piece of dust / dirt it encounters and the smell dramatically decreases. The smell also goes completely away after a week or so.
Still looking for a good case with a potrait stand as I have a couple of apps that require it or just look better that way. Anyone got a tip for me?
Related
Anyone else buy and have problems with it? I searched around after thinking I saw a complaint on it like I've got but couldn't find.
Basicly, I put it on started noticing the top was putting pressure onto the screen I think. THe touch screen got extremely laggy, unresponsivess, and just seemed to go crazy. I'm going to try sanding it down on the inside but I think that just sucks.
On top of that the phone fell out of the back/belt clip half one night and caused a nice freakin dent in my phone and allowed the battery to flip out almost down a sewer.
Anyone care to give me a positive review so I don't just throw this thing out?
Also - is it possible to buy a new physical case to replace a scratched/dented case? Not the body glove I mean the actual phone casing.
chibahawk said:
Anyone else buy and have problems with it? I searched around after thinking I saw a complaint on it like I've got but couldn't find.
Basicly, I put it on started noticing the top was putting pressure onto the screen I think. THe touch screen got extremely laggy, unresponsivess, and just seemed to go crazy. I'm going to try sanding it down on the inside but I think that just sucks.
On top of that the phone fell out of the back/belt clip half one night and caused a nice freakin dent in my phone and allowed the battery to flip out almost down a sewer.
Anyone care to give me a positive review so I don't just throw this thing out?
Also - is it possible to buy a new physical case to replace a scratched/dented case? Not the body glove I mean the actual phone casing.
Click to expand...
Click to collapse
I have this case and had the same problem. I have read that many others have had it too. Honestly I dont know why a company would put out a product like this. They all should be recalled, however me being me decided to just fix it by Taking a dremel tool and shaving some of the inside part of the screen protector off, making it put less pressure on the screen. It fixed it immediately. The case does a great job in protecting the phone, just a major flaw that can be fixed if you have the time and tools. If you dont, ***** to the company and get your money back and try something else.
Praygo said:
I have this case and had the same problem. I have read that many others have had it too. Honestly I dont know why a company would put out a product like this. They all should be recalled, however me being me decided to just fix it by Taking a dremel tool and shaving some of the inside part of the screen protector off, making it put less pressure on the screen. It fixed it immediately. The case does a great job in protecting the phone, just a major flaw that can be fixed if you have the time and tools. If you dont, ***** to the company and get your money back and try something else.
Click to expand...
Click to collapse
Yes I could see that the inside casing was a bit rough so sanding should stop the problem - but seriously that's a major issue.
Have you found that it holds the phone well though? Because I'm very upset that my phone fell out of it once already but maybe it was an error on my part and it wasn't secure enough...
I've never had the phone fall out of the body glove case.
i mangled my body glove case.
someone bumped into me and the phone fell out of the case AGAIN.
i ripped it to shreds and left it on the side of the road to rot into plastic hell.
i dont recommend this product.
I returned mine. I had the exact same issues (screen and phone falling out). It also didn't attach properly on the top left corner, it was always bowed out. I don't recommend it either.
Anyone got any else to share?
I was THIS CLOSE ( || ) to buying it. lol
Is there anything out there that's similar to it in design, but better?
returned
When all the way snapped on, mine pushed the top left corner so hard the entire screen would not respond to touch. Returned it.
My friend and i had the same issue. We just took it off messed around with it and put it back and it works fine, SOMETIMES it happens again but we just take it off and put it on.
Since there is not any other case that provides this type of protection we are keeping it. I rather my phone be safe than anything else.
I just ordered mine yesterday so I'm anxiously awaiting its arrival.
What exactly did you have to mod to get it to work? According to my readings, you just need to sand down the edges that connect with the screen right?
I may just buy the case and sand down what was mentioned. I like the design of the case..only one so far I really like.
I've been using one for about two weeks and am very happy with it. Had read about the screen pressure issue on other posts (searching helps folks), and scraped down the top corners before I put it on. Don't need a dremel tool or sandpaper. No problems, fits perfectly. The only warning is that it's a little dicey to take off once it's on -- it really fits snugly.
Yout're talking about the "sand texture" clip-on case, right? If so, yes, I bought the case too. The top cover was too tight and caused the screen issue people are mentioning. That was an easy fix by shaving down the edges that were pressing too hard (actually, I just cleaned off the coating from the plastic that was causing it... The bottom of the case however wouldn't fit at all. no matter what I tried, I couldn't get all of the clips to lock over the edges of the phone. I removed the felt lining and still had issues. I got around it by using thin double sided tape (for a temporary fix until I got a new case). I wouldn't trust the belt clip with the double stick tape though. I ordered the rubberized case on ebay and the fit is perfect. Just get that one. I sent an e-mail in to Body Glove and have had no response yet. We should all get our money back on these cases, or at least a redesigned bottom case that fits correctly. Right now it was just a complete waste of money. It's a shame, because I really liked the feel of the case.
Torkrench said:
Yout're talking about the "sand texture" clip-on case, right? If so, yes, I bought the case too. The top cover was too tight and caused the screen issue people are mentioning. That was an easy fix by shaving down the edges that were pressing too hard (actually, I just cleaned off the coating from the plastic that was causing it... The bottom of the case however wouldn't fit at all. no matter what I tried, I couldn't get all of the clips to lock over the edges of the phone. I removed the felt lining and still had issues. I got around it by using thin double sided tape (for a temporary fix until I got a new case). I wouldn't trust the belt clip with the double stick tape though. I ordered the rubberized case on ebay and the fit is perfect. Just get that one. I sent an e-mail in to Body Glove and have had no response yet. We should all get our money back on these cases, or at least a redesigned bottom case that fits correctly. Right now it was just a complete waste of money. It's a shame, because I really liked the feel of the case.
Click to expand...
Click to collapse
Could you give us the link for the ebay one please!
http://cgi.ebay.com/NEW-RUBBERIZED-...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
That is the one I ordered, and the fit is perfect. The only thing I wish it had was the belt clip insert for the case included. I don't know where to find one, but I mostly keep it in my pocket anyway.
you guys want a good case that protects? check out the monaco aluminum case, it comes with a clear lens on it which I haven't removed but you could if you wanted quick access to the touchscreen. I work in the construction field and have yet to have it fall off my clip. I also dropped my tilt (when I used it) from about 8" off a ladder and it was perfectly fine. The aluminum case for the fuze isn't any more bulky than the body glove case either.
bilbobrian said:
check out the monaco aluminum case
Click to expand...
Click to collapse
I've got one of these as well...and while it does protect the phone very well it will also lower your signal strength. I've had these type cases for the Wizard and Tilt and now the Fuze...whenever I'm in an area where the signal was a little iffy to begin with I WILL either drop the call or be unable to answer with the metal case. So, stay away from the aluminum ones if you go into lower coverage areas (and no...the slots they cut in the back to help improve the signal don't actually help.)
As many of you guys have noticed with your G1s, there are some issues with the screen! From it wobbling to creaking and god knows what else will come up. I got my G1 exactly 1 week ago, and I have noticed that the screen is wobbly when the phone is closed. It might just be me, but I keep noticing it and think its annoying. So I decided to make a quick easy fix for it. All you need is some clear plastic sheet maybe half a millimeter thick, Elmer's glue and scissors.
Cut the sheet maybe 1 to 2 millimeters wide and a centimeter or so long and place it in the bottom corner of the phone's chin, next to the small bump from the memory card slot. I dont have pictures right now, but the idea is pretty basic and you should be able to figure it out on your own.
After, the phone feels a lot more solid and the wobbling is gone!
I was actually just thinking of doing something similar the other day. Although, laziness got the best of me :-T
Haha nicee, well when you do get to it you should get quite a noticeable difference, and it really doesn't take that long to do, maybe 5 minutes or so at the most. Currently I am looking into actually custom designed cases for the phone with designs on it. I really like the design on the back of the battery cover of the Developer edition phone and am looking into making something like that.
I have resolved this problem with a silicon case from ebay. It comes with 2 parts, one on the main body and one on the screen body. Now when the phone slides, the silicone parts are touching each other so there is no wobbling.
SolemnWishing said:
Haha nicee, well when you do get to it you should get quite a noticeable difference, and it really doesn't take that long to do, maybe 5 minutes or so at the most. Currently I am looking into actually custom designed cases for the phone with designs on it. I really like the design on the back of the battery cover of the Developer edition phone and am looking into making something like that.
Click to expand...
Click to collapse
i had extra strips of universal screen protectors and used those. not only did it help with the squeaks. but it lined the screen up again. it always bothered me how it felt uneven while it was closed.
as for custom cases, count me in. i go through cases a little too quickly.
13bjunkie said:
i had extra strips of universal screen protectors and used those. not only did it help with the squeaks. but it lined the screen up again. it always bothered me how it felt uneven while it was closed.
as for custom cases, count me in. i go through cases a little too quickly.
Click to expand...
Click to collapse
Haha sounds good! Do you have any idea on a good tool to use to actually make the design? I would say sharpie, but it really isn't as permanent as I would want it, it will fade away too quickly.
haha sharpie. that's the reason i go through cases like there's no tomorrow. slow days at work drive creativity lol. i even went to a friend's shop that prints and cuts vinyl graphics for cars and had them cut the same dimentions of the shield skins
I tried this, and didnt like the way my phone felt when I opened/closed it. It was too stiff, and hung.
I did this http://androidcommunity.com/forums/showthread.php?p=151499#post151499
This worked beautifully! and took me like 20 seconds.
I also didn't like putting glue on my $400 ADP1
Dredge said:
I tried this, and didnt like the way my phone felt when I opened/closed it. It was too stiff, and hung.
I did this http://androidcommunity.com/forums/showthread.php?p=151499#post151499
This worked beautifully! and took me like 20 seconds.
I also didn't like putting glue on my $400 ADP1
Click to expand...
Click to collapse
That is pretty , much the same concept as my idea, except i used completely removable Elmer's glue, but which ever one works for you
And does anyone know where I can buy Developer edition battery covers?
I am a pretty big perfectionist when it comes to cases. I want something that doesn't add steps to the process of using the phone, and something that is durable as well.
I've been through the hard cover cases and found that they look terrible after a few dings. I also found that on most hard cover cases there is a certain point of weakness where the frame is smaller to compensate for port access, which led my case to crack.
Anyways, I just ordered the O24550LCST1BK from CarryMobile.
Google search O24550LCST1BK and click the first link to see it.
When will I have my url restrictions lifted? I've been a registered user for a bit now...
From the pictures it's just what I was looking for. It isn't blocky or otherwise ugly. I really like the rugged appearance and the metal hook on the back for misc usage!
The only downside is that it doesn't have a way to use the keyboard (thats another model that they offer though). I use mostly touch friendly apps anyways so I won't notice it.
When it arrives I will let you know what I think!
Is this the one you meant?
http://www.carrymobile.ru/all_HTC_HTC+Kaiser_HTC+TyTn+II+Sleeve+Type+Black.html
Doesn't seem very svelte. And having to take it off to use the keyboard is a big negative for me.
The O24550LCBSPBK-4550 may be more along the lines of something you would be interested in. I'm debating changing my order for that one and just removing the front cover flap.
Thx but all these cases are a waste of time and money. Just don't throw your phone on the floor and it stays fine. It's all common sense really. If you drop it, well that's your fault isn't it. Take care of your phone and it will last for years.
stuntdouble said:
Thx but all these cases are a waste of time and money. Just don't throw your phone on the floor and it stays fine. It's all common sense really. If you drop it, well that's your fault isn't it. Take care of your phone and it will last for years.
Click to expand...
Click to collapse
I can agree with your point of not dropping it being the number 1 way to make a phone last, but in my situation I need a case for both the protection and belt clip usage. I am normally pretty good about taking care of my phone, but I've had a few run ins with people bumping into me.
I know I am perfectly capable of taking care of my phone, but it's the other 'crazy drivers' im worried about. I'd think differently if I hadnt already had to replaced most of the internal components of my phone XD
I use Seidio hard case with local branded leather pouch (vertical, with flap magnetic cover). Pretty handy. Tried not dropping the phone, it's now 3 times already. All due to my own absent mindedness.
However, the Seidio holds up well, it hasn't cracked or anything. Phone working fine still ..
I had PDAir Aluminium on my SE M600 previously, but given Kaiser's bulk & weight, I decided going lighter. Besides I read somewhere the aluminium reduces signal quality (on M600 doesn't matter, not doing any Wifi - it doesn't have one but it matters for Kaiser, both GPS and Wifi)
Its similar to the case I had by SENA for my HTC 8525/HERMES. The only difference it had a flap the covered the entire screen/keyboard and did fully protect the phone. The only problem was you had to remove the phone for the keyboard. Generally didn't use the keyboard so it was perfect. Unfortunately SENA doesn't make one for the KAISER otherwise I'd buy it. Did protect the phone fully.
stim141 said:
Its similar to the case I had by SENA for my HTC 8525/HERMES. The only difference it had a flap the covered the entire screen/keyboard and did fully protect the phone. The only problem was you had to remove the phone for the keyboard. Generally didn't use the keyboard so it was perfect. Unfortunately SENA doesn't make one for the KAISER otherwise I'd buy it. Did protect the phone fully.
Click to expand...
Click to collapse
did you look at the O24550LCBSPBK-4550 model? Sounds like what you describe, except you can open it up and the keyboard keys are protected by a plastic layer. I finally broke down and got this case, so I am just waiting on it to arrive from hong kong now
Hi Guys,
I ordered one of these and it arrived this morning, A500 fits in snug as a bug in a rug!
Quality is really impressive, and all the cut out slots for ports are in the right place.
http://www.amazon.co.uk/Navitech-Ex...K9WE/ref=sr_1_3?ie=UTF8&qid=1306931117&sr=8-3
£14.99 So I think is the cheapest fitted case around? Thought I would share for all!
Dan
Could you post a couple of pics? I was thinking of getting this, but the two photos they have of it on amazon don't seem to be of the same case. Also it looks like they flipped the second one cause the back camemra is on the wrong side.
Edit:
Actualy after comparing the front shot is of the PDair BX2 and the back shot is of the PDair BX1 that has been flipped and had the PDair logo Photoshopped out.
Sent from my A500 using XDA Premium App
are the 16mb and 32mb tabs the same
external dimensions?
secularhuman said:
external dimensions?
Click to expand...
Click to collapse
16gb and 32gb are identical in size -
height - 260mm (10.24 inches)
width - 177mm (6.97 inches)
thickness - 13.3 mm (.53 inches)
Hope it helps!
Does this case provide access to the SD card slot without removing the Tab from the case. I have the Acer case, which is a very snug fit making swapping sdhc cards a lot more of a pain than I like to suffer (which is none at all really
Dave
davmyc said:
Does this case provide access to the SD card slot without removing the Tab from the case. I have the Acer case, which is a very snug fit making swapping sdhc cards a lot more of a pain than I like to suffer (which is none at all really
Dave
Click to expand...
Click to collapse
Hi there...
I have this case as well.
No. You'd have to remove the unit from the case to access the micro sd card.
the other thing that is not great about the case (which I'm going to modify) is that the leather around the bezel actually covers the edge of the screen, not just the border...it's a little smaller than I'd like. Why?
If you use the stock Android Browser, there is a great feature - Quick Controls - that allow you to slide your finger from off the screen onto the screen and bring up browser coltrols exactly where you need them. SUPER trick and very easy...
..and this case does not allow you to use this feature...
So, yeah. Modifications coming. When done I will post pics...Hopefully by the time I buy the perfect follow up case, they have thought of these things...
got mine today, shipping only took 1 week
Nicely built. Split keyboard still easy to use. Looks very smart.
It does allow the tablet to
slide down a little so the rfcamera gets covered up, bot a little surgery will fix that. If you use it upsidedown,
it doesnt slide down enuf to over the camera or the keys at thr screen bottom.
Secular
so...which one of the two different photo is????
Navitech case review
After having this case for over a week, I'm noticing a few things that are beginning to make me shop for another case...
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
2) The more I use it, the more the cheap leather (or..whatever it is...) is loosening up and is getting a bit..baggy around the screen.
3) I truly wish it had 1/8 of an inch more around the screen area to be able to use the gestures with the stock browser because I LOVE the way they work.
At this point, I'm probably going to start modifying it so it serves it's protection purpose until I get the next case. I am already starting to shop...
If you can live with these issues, by all means go ahead and get one - overall it's not that bad if you are willing to do a few mods to it...But be forewarned. You are getting what you pay for at this price...
try upside down for item one
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
most progrms and b
rowsers allow upside down operation.
secularhuman said:
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
most progrms and b
rowsers allow upside down operation.
Click to expand...
Click to collapse
...and? there's ONE hole in the border / frame of the case that is JUST big enough to see the front camera when it's in the perfect position. If the camera is not lined up with that hole - no workie...
Also, if you put the unit in upside down, not only does the FRONT camera not work, but the camera on the back, the speakers, and the jack for the dock are covered as well. Also no workie...
Also does not address the loosening up of the flap issue..I've only had it a week and ALREADY it's pretty loose and allows the unit to slide Very Easily inside the case...
Ummm...Do you work for Navitech by any chance?
no I dont work for them
Ummm...Do you work for Navitech by any chance? [/QUOTE]
no but I have one. when upsidedn the rfc works as do the speakers, the ffc no.
maybe some velcro would be an easy fix.
secular
the acer branded case also slides a great bit after a short time, but it is a very thin material that provides almost no drop protection.
At least this is leather ....
The case from navitech is half the price of the Acer case and is way better. The Acer case isn't only rubber, but seriously rubbish. I used doublesided tape for the flap of the navitech, the tab doesn't slide anymore
Thanks for the idea
gerke said:
The case from navitech is half the price of the Acer case and is way better. The Acer case isn't only rubber, but seriously rubbish. I used doublesided tape for the flap of the navitech, the tab doesn't slide anymore
Click to expand...
Click to collapse
The double sided tape works great!
Secular
I have had this case for 2 weeks and loving it so far. Great fit.
The flap that holds thetablet snug did get loose as people mentioned. Iused a 2x1 inch piece of industrial velcro to creat a latch. Works like a champ and i can remove the tab when needed.
I've had this case on order from amazon.com (U.S.) and so far although they claim they shipped it June 6 I've seen no sign of it. No tracking info was provided. After contacting them through Amazon, I got a response stating that they had had trouble with shipments to the U.S., and in exchange for refunding my shipping fee they asked I wait another week.
Waiting, but not impressed (with Navitech) so far.
I had a problem with my shipment as well. They've asked me to wait a week longer and they (because the shipment never came) asked if I want a new product or a refund.
I asked for a new product and they sent it today via first class airmail.
It's not their fault that post offices keep losing shipments. Actually we're both unhappy. They had to ship two products instead of one and I had to wait a month for it.
C'est la vie
Well mine finally showed up today. Battered and dirty in a big mailing folder not a box. The case doesn't seem any worse for the trip it had taken, and my A500 is having a nap in it right now.
The flap that tucks under it to hold it in the case is very soft leather and doesn't keep the tablet from slipping a little up or down. Still, this case should be find to carry my A500 out and about in and keep me from worrying about scratching the thing.
I have the Acer official case for the tablet. 2 things i noticed. it was really tight as everyone knows to fit the tab in the case. after a few weeks of taking it out to replace the sd card. or clean out the crap that gets in it (dust, crumbs stuff), the bottom right has torn a little bit. just enough that it does not fit well anymore and slides down as i hold it. any idea on a fix for that? and one more thing. does anyone think replacing the Velcro with small magnets will damage the tablet in any way? thanks
(if this belongs in another sub-forum, sorry, please move)
gh123man said:
I have the Acer official case for the tablet. 2 things i noticed. it was really tight as everyone knows to fit the tab in the case. after a few weeks of taking it out to replace the sd card. or clean out the crap that gets in it (dust, crumbs stuff), the bottom right has torn a little bit. just enough that it does not fit well anymore and slides down as i hold it. any idea on a fix for that? and one more thing. does anyone think replacing the Velcro with small magnets will damage the tablet in any way? thanks
(if this belongs in another sub-forum, sorry, please move)
Click to expand...
Click to collapse
i ended up cutting a hole out for the sd card door. and i was worried about magnets too, so i ended up using a stronger velcro and it works pretty good. as far as your tear, you might try super glue to repair it, or try sewing it back together? if i think of anythingbetter ill let ya know
hey thanks! yeah my girlfriend left her sewing kit at my house. so i mite just try that. anyone know about magnets? i just wanna be sure because i feel like it would be a lot better then Velcro
My case (non an OEM case made by Navitech) has a small magnets at two corner that hold it closed. They aren't very strong, but they are strong enough to hold the case closed and I have never experienced any problems because of them.
i bought the 9$ gizmogeeks hardcase from amazon and I love it. Even has a net storage area for cables on the inside
Why are you having to take card in and out...?
shaun298 said:
Why are you having to take card in and out...?
Click to expand...
Click to collapse
Some people use more than one card.
Plus the damn microphone is RIGHT THERE! Idiotic of the designers...
shaun298 said:
Why are you having to take card in and out...?
Click to expand...
Click to collapse
i only have one sd card at the moment. and im passing at between my droid, atrix, and this tab. i just ordered 2 32gb cards for the tab and atrix. does anyone think that it would be harmful to use 2 semi strong magnets right in place of the cheap Velcro? i have the magnets. but i dont know if it will affect the mic, or god knows what else is in there.
I used some 3M command double sided tape to deal with the sliding issue. It isn't too sticky, and the pull to remove with no residue makes it a non issue for getting it out of the case and off the tablet when needed.
I have multiple msdhc cards, with a 32 in both my phone and tablet, so I don't often need to switch out cards.
I'd recommend cutting a hole out in the case for it. No, wait, I'd recommend something else...
Not using micro SD cards interchangeably. I'm baffled when I read review after review of tablet or phone where the auther comments on how the SD card is buried beneath the battery or the cover for the card slot is awful and will break if used too much. Of course they are like that...SD cards are not meant to be interchangeable. If you really are moving lots of data back and forth, such as watching a ton of movies, fine, stock your tablet with a large card, but use the port that's actually meant for interchangeability: your USB port. Plus, it's much cheaper for a high capacity USB drive than it is an SD card.
And to actually answer your question, weak magnets should be okay, but it really depends on where some of the parts are inside the unit. Try looking around for other cases that are meant for the Acer and see where they put the magnets.
Sent from my A500 using XDA Premium App
n1nj4dude said:
i ended up cutting a hole out for the sd card door. and i was worried about magnets too, so i ended up using a stronger velcro and it works pretty good. as far as your tear, you might try super glue to repair it, or try sewing it back together? if i think of anythingbetter ill let ya know
Click to expand...
Click to collapse
Would you mind putting up a picture or two?
i bought the targus leather case/stand for mine. It's $30 from best buy, but it has 3 angles for the stand and seems well built.I'd always recommend it against the official case.
okay, so first i tried superglue on the case. as soon as i slid the tablet in, it ripped open again, so that's a no go. i was going to sew it but worried that would just make it weaker or tear worse. so i used the 3m tape idea because i happen to have it laying around. works great! so thanks ... still trying to decide what to do about the crappy Velcro. :/
Johnny0906 said:
Plus the damn microphone is RIGHT THERE! Idiotic of the designers...
Click to expand...
Click to collapse
Actually, the mic points toward the back of the unit, not the front. Looking at it from the front though, the mic would be a little left of center according to the measurements. So, with that info in hand, looking at that location on the back of the Acer case, there are three little holes, right where the mic is at.
I call mystery solved!
under some very close inspection i found a small opening in between the glass and the top bezel that is right behind the mic, not sure if that's what it is for, but it makes sense to me.