Database Users

stuck after installing MAGLDR while installing NAND

oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?

Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.

Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate

Moved to HD2 Android Q&A and General

I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!

sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?

Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.

And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?

Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.

Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.

I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.

There are the Android versions that run off sd card which run as a dual boot with winmo.

sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!

sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..

Believe me that i've tested that way, and another ones, so as to get it work, but no luck.

I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .

mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.

chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?

I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks

cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this

[Q] Help PLS my hd2 is blanc dead!!!

Hi everyone
I think I killed my hd2 today ( I wanted to have a android, but first I needed HSPL2 and then MAGLDR. So I install HSPL2 this was succesfull but when I install a MAGLDR1.13 my phone should be black with flash..... but it gets white with this HTC logo and thats it, I can't turn it on or off, I can't connect to PC I can't do nothing!!!! can anybody help me. Is any chance?!

agnes12 said:
Hi everyone
I think I killed my hd2 today ( I wanted to have a android, but first I needed HSPL2 and then MAGLDR. So I install HSPL2 this was succesfull but when I install a MAGLDR1.13 my phone should be black with flash..... but it gets white with this HTC logo and thats it, I can't turn it on or off, I can't connect to PC I can't do nothing!!!! can anybody help me. Is any chance?!
Click to expand...
Click to collapse
First off what model of HD2 do you have, is it the Eroupean or T-Mobile US model? What version of HSPL did you install? You need to install HSPL 2.08 to install MAGLD cause MAGLD does not support any higher version of HSPL. If you have installed HSPL 2.08 then it might .e best to just revert your HD2 back to stock and started all over again. To revert back to stock download the latest official update for you HD2. You will have to go to your Carriers website and find the latest update if the update is not on your carriers website then go to HTC.com and look for it there. Once you have downloaded the correct update ROM for your HD2 you can either try to flash it via your computer with your HD2 connected via USB cable or flash it via your SD card. To use your computer while your HD2 is off hold down the volume down button and the power(end button) until you see the tri color screen, this is the bootloader mode. Wait until the serial in the bottom white bar changes to USB and then run the .exe or RUU to flash the ROM. If you can not get the USB to show in the white bar at the bottom for some reason look in the folder created from unzipping/exstracting the zip file that the update comes in and look for something like "RUU_signed.nbh" it might not read exactly like that but it will end in "nbh". Copy this to the root of your SD card and rename it exactly like this "LEOIMG.nbh", this is the only file name the bootloader will except. You may also need to use a micro SD card reader to copy this to your SD card. when you have the file coppied and renamed on your SD card while your HD2 is off hold the volume button and the power(end button) down until you see the bootloader and as soon as it says searching on the screen let go of the volume down button and the ROM should flash this might take a little longer than flashing via your computer so don't freak out if the screen stays black for a while or if the progress bar hangs occassionaly during the flashing. Also if this does not work visit the thread on flashing via SD card cause there is other variables to flashing via SD card like size, class and the way your SD card is formatted. Here is a link to the thread Also after you have flashed the official update ROM you will no longer have HSPL so you will have to reflash it befor trying to teflash MAGLD.

If he has 2.08, their is no need to do it all over again.

mattfmartin said:
If he has 2.08, their is no need to do it all over again.
Click to expand...
Click to collapse
Yesthey could try to reflash MAGLD by manualy putting the HD2 into bootloader. But from what thier post says.
I can't turn it on or off, I can't connect to PC I can't do nothing!!!!
Click to expand...
Click to collapse
So maybe reverting back to stock and starting all over again would be best.

Thank a lot! I try all of this but my phone stays with this colours and nothing is going on

I have a european model hd2 and the HSPL was 2

agnes12 said:
Thank a lot! I try all of this but my phone stays with this colours and nothing is going on
Click to expand...
Click to collapse
If your HD2 will still go to the bootloader than it should be savable. If you tried to flash via your SD card and nothing then either you did not release the volume down button fat enough when searching appeared on the phone screen. Or your SD card is either not compatible to use for flashing, it is not the right class of SD card to flash with, or your SD card is not formatted correctly. I suggest you go to the link I posted in my first post here and read through the thread it will tell you how to solve any of these problems and you can post there in that thread also some one there can probably give you more advice.
If you tried to flash via you computer and USB cable then you have to have it say USB in the bottom white bar of the bootloader, other wise it will not flash the ROM. Also you have to make sure you run the exe or RUU right to flash from your computer.
I hope you can get your HD2 working again. Oh yeah you never said what model HD2 you have.
Also what carrier are you with?

OMG I did it!! hehehe thanks again!! i connect phone via usb to my pc when I had this colours and then I instal again on phone ROM and it works!!!!!!!!!
ufffffffff

agnes12 said:
OMG I did it!! hehehe thanks again!! i connect phone via usb to my pc when I had this colours and then I instal again on phone ROM and it works!!!!!!!!!
ufffffffff
Click to expand...
Click to collapse
Glad to know you got it fixed. Just be carful and follow all instructions exactly if you want to install a NAND Andriod ROM. And make sure to select HSPL 2.08 when you reflash HSPL to your HD2.

I will be installing android ones again tonight, fingers crossed this time will be ok, but first I need to find a rom oldest then 3.14

White scree of death - Please help

so today i tried to boot-up my phone but its didnt boot,
Its only show a white screen (of death i guess)
I abled to get into the bootloader (RGB screen)
But when i try to flash the stock wm6.5 htc rom its dont work
I tried to flash from the computer and its just stuck on 0%
I also tried flash from the sd card but its stop after like 20% (and mark in red the radio)
Please please i need help...my phone is dead....Thank you
The hd2 was on android rom
EDIT:
This is exactly the problem i have:
http://www.youtube.com/watch?v=QS02ySr2Kic

Have you got the hd2 nand toolkit?
If not get it and try installing the radio for your device ,make sure it is the correct one for your device go here to get it
http://forum.xda-developers.com/showthread.php?t=611787
You can then use the toolkit to install android again. follow the tutorials, of which there are many on xda, here's one..
http://forum.xda-developers.com/showthread.php?t=1402975

shanman-2 said:
Have you got the hd2 nand toolkit?
If not get it and try installing the radio for your device ,make sure it is the correct one for your device go here to get it
http://forum.xda-developers.com/showthread.php?t=611787
You can then use the toolkit to install android again. follow the tutorials, of which there are many on xda, here's one..
http://forum.xda-developers.com/showthread.php?t=1402975
Click to expand...
Click to collapse
How can i know which radio i need?

Here's another link
http://forum.xda-developers.com/showthread.php?t=1021837
read especially bottom of post 3
Edit: don't forget to thank the author..

shanman-2 said:
Here's another link
http://forum.xda-developers.com/showthread.php?t=1021837
read especially bottom of post 3
Edit: don't forget to thank the author..
Click to expand...
Click to collapse
Thanks a lot men but i still don't understand which radio i need to flash...
I don't have a T-MOBILE HD2 ,mine is probably from Europe (512 MB ram)
The S/N: HT01MNW041** , hope its can help

This one is safe for both..
http://www.multiupload.com/QP0IWGY42F

shanman-2 said:
This one is safe for both..
http://www.multiupload.com/QP0IWGY42F
Click to expand...
Click to collapse
Thank u men....but i cant figure how to install the radio throw the toolkit
i am afraid to do something wrong
Edit:
I figure the way to flash but its still stock on 0% and give me an error 262.... :-(
Any suggestions?

"freezer trick"
search for it!

OK. Your problem has nothing to do with the radio ver.
Error 262 could be a communication problem, when you are in the bootloader screen with cable plugged in does the word "serial" on the fone change to "USB"?
And what does it say at the top of the screen, spl. etc ?

shanman-2 said:
OK. Your problem has nothing to do with the radio ver.
Error 262 could be a communication problem, when you are in the bootloader screen with cable plugged in does the word "serial" on the fone change to "USB"?
And what does it say at the top of the screen, spl. etc ?
Click to expand...
Click to collapse
yes...it changed to "USB"
and it say SPL-2.08. HSPL 8G XE
BTW , this is exactly the problem i have:
http://www.youtube.com/watch?v=QS02ySr2Kic

try a task29 using the toolkit if you succeed decide on msgldr (allows you to dual boot) or cLK 1.5 for androidfollow one of the guides in the links I posted..
hope it works.

shanman-2 said:
try a task29 using the toolkit if you succeed decide on msgldr (allows you to dual boot) or cLK 1.5 for androidfollow one of the guides in the links I posted..
hope it works.
Click to expand...
Click to collapse
task29 give me 270 error....i really don't know what to do anymore...
give up ?

****!
get cLK 1.5 on your sd card and follow the instructions in the post I gave you.
After that I don't know.

Nothing seems to work...i am still getting error 270
I am sure there is solution i just cant figure it out...
Anybody?

[Q] HD2 stuck at green HTC logo...tried everything

Hi, i ve read almost all topics here about the subject. this is what i've done so far:
i've succesfully installed
-hspl
-Radio Leo 2.15.50.14
-task29
-then MAGLDR111
then i was going to install an android nand version i found on the internet but my HTC got stuck on the green HTC logo screen.
i never get the bootloder menu. this is my problem.
Yes, I have leoimg.nbh in the root of my SD
After i put it there, i got an menu after reboot saying
'radio_v2
rcust
bootloader
splash1..'
press power to update...
but since this leoimg.nbh is my original windows image, it updates back to wm6.5
So anyone can help me how to pass this green screen please ?

try the links below, they might help

mengfei said:
try the links below, they might help
Click to expand...
Click to collapse
well it is just the shortcuts of what i've done already
i will probably wont be able to see the bootloader menu again..but thanks for the response

mmaniac said:
well it is just the shortcuts of what i've done already
i will probably wont be able to see the bootloader menu again..but thanks for the response
Click to expand...
Click to collapse
He says that to everyone, anyway.
First of all, not any HSPL will work. You need HSPL 2.08 for MAGLDR.
Second thing is, I suggest you use MAGLDR 1.13 (I still don't understand why people use the old, when there is a new)
Don't do Task29, it is useless. And now since you've installed winmo through sd card, you need to re-install HSPL (2.08), after that install MAGLDR (1.13).

[Q] HTC HD2 stuck on HTC screen

Hi i have a htc hd2. when i power the phone up it stays on the htc screen and doesnt go an further. Please help
Thanks

hi! have you installed HSPL 2.08 and an os different form WM 6.5 or you have the stock rom?

lukes91 said:
hi! have you installed HSPL 2.08 and an os different form WM 6.5 or you have the stock rom?
Click to expand...
Click to collapse
hi im new to all this and i dont have a clue what you mean please can you explain

ok, don't worry, I'm here to try to help
so, let's start from the very beginning: HD2 comes with Windows Mobile 6.5, but there are several procedures and guides to flash different operative sistems like android... to help you, i need to know if your device is still running Windows Mobile or if you ever flashed a different os after installing HSPL, a bootloader and a custom recovery; if you don't understand what I'm talking about, i suggest you to read a guide like this one

lukes91 said:
ok, don't worry, I'm here to try to help
so, let's start from the very beginning: HD2 comes with Windows Mobile 6.5, but there are several procedures and guides to flash different operative sistems like android... to help you, i need to know if your device is still running Windows Mobile or if you ever flashed a different os after installing HSPL, a bootloader and a custom recovery; if you don't understand what I'm talking about, i suggest you to read a guide like this one
Click to expand...
Click to collapse
When i put the phone in boot mode (4 colours screen) it says 2.08 HSPL. Does this mean that there is HSPL installed?
I have also read another thread and it says you need to update the radio. Should i do that?

ok, if it says HSPL 2.08 by Cotulla it'r rooted, so you can try to perform a Task29 and to install again bootloader, recovery and rom, it should work!
which radio have you installed? if you have 2.15.50.14 and you have EUR HD2, it's fine as it's the best radio to install custom roms: it should see the biggest amount of ram available...
tell me if it helped, otherwhise I'm here

lukes91 said:
ok, if it says HSPL 2.08 by Cotulla it'r rooted, so you can try to perform a Task29 and to install again bootloader, recovery and rom, it should work!
which radio have you installed? if you have 2.15.50.14 and you have EUR HD2, it's fine as it's the best radio to install custom roms: it should see the biggest amount of ram available...
tell me if it helped, otherwhise I'm here
Click to expand...
Click to collapse
Hi thanks for all your help but I followed a guide on YouTube and it fixed it
Thanks for all your help

ok, the most important thing is that you can play again with your device
good afternoon!

habeeb2797 said:
Hi thanks for all your help but I followed a guide on YouTube and it fixed it
Thanks for all your help
Click to expand...
Click to collapse
Can you help me? My HD2 is also suspended htc screen.thanks

habeeb2797 said:
Hi i have a htc hd2. when i power the phone up it stays on the htc screen and doesnt go an further. Please help
Thanks
Click to expand...
Click to collapse
help me..........please.................

hoangmit said:
help me..........please.................
Click to expand...
Click to collapse
hi! can you provided me the infos i asked in previous posts? maybe i can help you

HD2 FAILED BOOT And FLASH ATTEMPTS
hey good day
im quite familiar with flashing roms and all that jazz
the last rom i had on my hd2 was a wp7.8 rom
one day i woke up it was stuck on magldr title screen
the menu didnt and couldnt come up
so i bit my tongue and returned to stock in efforts to reflash from scrach ...
now it stuck at the HTC logo , nothing i do gets it to work again
it boots to the bootloader mode it will accept flashing of anykind but it wont boot pass HTC , i even tried to manuall remove the HSPL and task 29 a million times , to no avail
help !!!
PS . it wont load a rom via SD

hi
I have a similar problem. I had android installed on SD, with multi-boot WM6.5. One day, the device went blank. I tried many ways and the farthest I got to was to have the original stock rom reloaded from SD (leoimg) and it stuck half way with no touch screen response to the input tests. I tried hard reset and install another rom and it went completely blank again. I could boot into tricolor but it displayed errors during the course of flashing any rom. I have HPSL 2.08 installed but not mgldr. Recovery was installed on SD.
In short, I am stuck at tricolor and unable to go any further. Cannot even install mgldr now.
Help please!
WS

lukes91 said:
ok, don't worry, I'm here to try to help
so, let's start from the very beginning: HD2 comes with Windows Mobile 6.5, but there are several procedures and guides to flash different operative sistems like android... to help you, i need to know if your device is still running Windows Mobile or if you ever flashed a different os after installing HSPL, a bootloader and a custom recovery; if you don't understand what I'm talking about, i suggest you to read a guide like this one
Click to expand...
Click to collapse
Hi... I have the same problem after i tried to install android on it.
And in boot mode (4 colors) it apears:
"PB1100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40 "
Please help me... I would like to instal on it Windows or Android.