Related
Hi,
Data Crashes. Please contact your service center.
I tried unlocking and now it comes up with the above error.
How do I hard reset?
How do I fix it?
Please help!
Thanks
MC_Bob
Only one fix for that I am afraid contact http://www.imei-check.co.uk/
Will cost you about £30 but your device will be both sim and cid unlocked. Make sure they cid unlock it for you as well.
btw what rom do you have and whats the ipl/spl numbers if you can still get to this info and what did you try and unlock the device with?
I just fixed it with hard reset. Phew!
Tmobile ROM.
And its g4 chip
I tried unlocking again.
When I put my o2 card in it says, network is locked. Please input unlock code :S
What is it?
Thanks
mc_bob said:
I just fixed it with hard reset. Phew!
Tmobile ROM.
And its g4 chip
I tried unlocking again.
When I put my o2 card in it says, network is locked. Please input unlock code :S
What is it?
Thanks
Click to expand...
Click to collapse
Well you are fortunate to get out of that one - I would be careful
When you unlocked your device I assume you used lokiwiz 0.3a you should have got a simunlock number - it would have come on the screen use that.
It just disapears before I can read anything?
Does it save a log file so i can find the code?
Thanks
Did you unzip lokiwiz to c:\lokiwiz rather than run it from desktop?
Be back in a mo just checking my lokiwiz to see if it has a logfile
meschle said:
Did you unzip lokiwiz to c:\lokiwiz rather than run it from desktop?
Be back in a mo just checking my lokiwiz to see if it has a logfile
Click to expand...
Click to collapse
Ok thank you
Cant see a log file but with mine it does stay on screen and says press key to exit.
meschle said:
Cant see a log file but with mine it does stay on screen and says press key to exit.
Click to expand...
Click to collapse
Damn, so What should I do?
Kinda stuck
Can I re unlock it?
I also cant seem to lock the phone. Says files are in use.
MC_Bob
Did you copy and run enablerapi.cab on your device? Found in lokiwiz\utils
meschle said:
Did you copy and run enablerapi.cab on your device? Found in lokiwiz\utils
Click to expand...
Click to collapse
Yup,
Im going to try again, but print screen and get the code.
There must be another way!!!
mc_bob said:
meschle said:
Did you copy and run enablerapi.cab on your device? Found in lokiwiz\utils
Click to expand...
Click to collapse
Yup,
Im going to try again, but print screen and get the code.
There must be another way!!!
Click to expand...
Click to collapse
Disable any firewalls and antiviral and make sure your device is properly activesynced.
You posted in the lokiwiz 0.2b thread - are you using lokiwiz 0.3a? here http://forum.xda-developers.com/viewtopic.php?t=50768
0.2b is not for your device.
I was indeedy!
Ill use 0.3 and post back.
**feels stupid **
Oooh it worked.
Just needed to enter the code!
I feel stupid but better
Thanks
mc_bob said:
Oooh it worked.
Just needed to enter the code!
I feel stupid but better
Thanks
Click to expand...
Click to collapse
Congrats
Hi,
5 days ago i install wp7 and start trying to unlock phone with chevron. After many threads it work! but, unfortunetly, I accidentally re-lock it ;x After that, I try all solutions what I find at xda, nothing help me to run unlock correctly again ;x So, now im asking, im gonna hard reset my phone, and tell me what is the best to do that chevron will run without error ;P
Thanks for all help ;]
add:
- i have ms sdk
- have zune [not as guest]
- skype closed
- anti-virus and firewall off
- airplane mode [on & off trying]
- auto date off
- all .cer done
and as I say, error with connection is my nightmare ;x
Right,
Close Skype completly
Close Anti-Virus or just disable it
Put Chevron on Root of you partition C
Right Click it and Run as Admin
Check both boxes
Unlock it
If helped click thank button
Read this post as a guide: For those who can't unlock anymore using ChevronWP7, here's why!
I also try it and nothing ;x
chevron work around
Chevron didn't work for me until I changed both dates(phone + PC) to 10/1/11, and it worked, I take no credit just passing the info.
I try it already ;x nothing ;x
i think they removed the second thingy from their server... try to go to chevronwp7.com/cert and it goes 404... :S probably m$ took it down
me too, i,ve installed your certificate modified the registry an the results is the same of always, no unlock
Thx
Oh well, after hours of trying to unlock and hours to simply get any email account up and running again i finally reflashed magldr/wp7 (made task29 before).
It unlocked on the first try (again). It seems that windows phone reset doesnt really reset, does it? Because thats were the problems started for me...after the first reset. I didnt tried the magldr hardreset though.
stirkac said:
i think they removed the second thingy from their server... try to go to chevronwp7.com/cert and it goes 404... :S probably m$ took it down
Click to expand...
Click to collapse
That doesn't make a difference, you can install the cert manually by emailing it to yourself and opening the attachment.
See attachment..
okay finaly got it to work!!!
the problem is file that is missing on chevron's server. so what u need to do is follow "chevron isn't working and here's why" to edit hosts file on PC and install new certificate on phone. when ur done there, shut down computer, pull out internet cable (or turn off wifi before shutdown)
when you're back up, go to C: where your chevron should be and run as admin
works for me everytime now
Direkts said:
Hi,
5 days ago i install wp7 and start trying to unlock phone with chevron. After many threads it work! but, unfortunetly, I accidentally re-lock it ;x After that, I try all solutions what I find at xda, nothing help me to run unlock correctly again ;x So, now im asking, im gonna hard reset my phone, and tell me what is the best to do that chevron will run without error ;P
Thanks for all help ;]
add:
- i have ms sdk
- have zune [not as guest]
- skype closed
- anti-virus and firewall off
- airplane mode [on & off trying]
- auto date off
- all .cer done
and as I say, error with connection is my nightmare ;x
Click to expand...
Click to collapse
Hi Direkts,
are you OK with the computer/Laptop windows Registry Editor?
IF so then go HKEY Local Machine/Software/Microsoft/WindowsPhone/ProxyPorts/ now scroll down until you see DeviceReg.
Now does the data numbers look like this: 0x000069c5(27077)
If not then it will have to be changed, then you chevron should work.
Russ
I have it changed 5 days ago, when i first time trying to unlock my phone ;x
I think that my only chance is task29 and reflash ;x But which metod i should try after reflash ? ;p
stirkac said:
okay finaly got it to work!!!
the problem is file that is missing on chevron's server. so what u need to do is follow "chevron isn't working and here's why" to edit hosts file on PC and install new certificate on phone. when ur done there, shut down computer, pull out internet cable (or turn off wifi before shutdown)
when you're back up, go to C: where your chevron should be and run as admin
works for me everytime now
Click to expand...
Click to collapse
Not sure what to change on the PC, not very clear to a noob like me
Hey, im able to run chevron. But then the process crashes. Did anyone experience this?
russpattaya said:
Hi Direkts,
are you OK with the computer/Laptop windows Registry Editor?
IF so then go HKEY Local Machine/Software/Microsoft/WindowsPhone/ProxyPorts/ now scroll down until you see DeviceReg.
Now does the data numbers look like this: 0x000069c5(27077)
If not then it will have to be changed, then you chevron should work.
Russ
Click to expand...
Click to collapse
Dont think thats the case....I already have that registry key and chevron doesnt work. Worked fine a couple of hours back....
chevron is so annoying ;x there is no way to get my phone unlock ;x really , after so many days nothing! 2x task 29, many hard reset's and nothing! i love Wp7 but im forced to back android ;x ehhhh maybe soon there will be better way (100% work) to unlock phone ;x
Its working i tried a few times today. but it worked and i just did everything i was doing yesterday on my other phone.
i know it works, but i tried everything and still locked ;x plz, help me, im desperated ;x
Finally I Unlock my phone! I need to turn off "routing and RAS" ;D No only activation key can any one could help me ? i will be very greatfull ;D
Hi,
My problems is in downloading... When I try to download something from marketplace I get information:"Can`t get this info right now. Check back in a little while." I have that information since I input activation key. Can someby tell why I have that error?
Second issue is in zune when I want to sync my device some window is opening with terms agreement. When I click on I accept button I have another error and I can't sync my device...
In both issue I try everything. Maybe is something in setting in my HD2?
please help
I have the same issue with Marketplace. Not sure why dough....yet
yeah same issue here too. just market place one though.
daz990 said:
yeah same issue here too. just market place one though.
Click to expand...
Click to collapse
You havent done the reg hack to make the market think your HD2 is an HD7. If you dont do that, it wont work.
I think i did the reg hack messed about so much cant remember if i have or not lol
spbeeking said:
You havent done the reg hack to make the market think your HD2 is an HD7. If you dont do that, it wont work.
Click to expand...
Click to collapse
...and you also need to set your Windows Live account location to a country where Marketplace is supported (eg. US, UK, etc.).
I also had the same issue and I solved it by creating a new Live account, setting the location to US and confirming my e-mail address.
Good luck!
antaed
can someone post the reg hack thread link my dumb ass can't find it. cheers
Phone name
My phone name now is "HTC HD7 T9292". Is it ok??
If not tell me how I can change it ?
It should be OK. Problem is, when it says that its LEO07.
Make sure that you have "cookies enabled" on your browser. I had problems downloading apps and for some reason cookies were disabled. Once enabled all was ok again.
ericwa said:
Make sure that you have "cookies enabled" on your browser. I had problems downloading apps and for some reason cookies were disabled. Once enabled all was ok again.
Click to expand...
Click to collapse
I have enable cookies and still have the same problem...
chumaj001 said:
It should be OK. Problem is, when it says that its LEO07.
Click to expand...
Click to collapse
mine is still leo07 done the hack but it's not showing up as hd7 HELP!!!
Hi
Probably is no anwser for this problem.
I install ChevronWP7, before had the validation code, but after one or two day can´t access to Chevron:
Sorry, I'm having a trouble communication with phone:
-Please make sure it's connecting with USB
-Please start Zune aplicação
Inside Marketplace, have the some problem when click Install Button:
-WP7 can't get this info right now. Check back in a little while
I have a HD2 with WP7, with English OS, but i live in Portugal. My Zune say Leo07, is it the problem?
I access to marketplace with 3G or wi-fi without conection to PC(zune).
Today i call to Portugal Microsoft but he don't no the answer for my Marketplace access problem. He mail me with some contacts support:
https://emea.microsoftstore.com/europe/en-US/Contact-Us
Waiting for good news
Guys! Just carefully make this steps: http://forum.xda-developers.com/showthread.php?t=912218
It's working!
I'll try to help you.
W razie czego pisz jak czegoś nie będziesz mógł ugryźć.
grzesm said:
Guys! Just carefully make this steps: http://forum.xda-developers.com/showthread.php?t=912218
It's working!
I'll try to help you.
W razie czego pisz jak czegoś nie będziesz mógł ugryźć.
Click to expand...
Click to collapse
Thanks for the help, that is the guide I followed. I just cannot get phone name to become hd7 still leo 70 have activation code just keep getting check back later when trying to download from marketplace. Any ideas?
If it's still leo70 you must make all steps starting from 1. Download XBMOD Deployer.
Did you copy file from the file in /My Documents/My Ringtones/ to /Windows/ , overwrite if asked? And maybe you can't find it here?
Guys I believe that if you tried to access Marketplace before doing the reg hack then you may have no option other than to reflash your phone with WP7 and start again.
Read this thread and you should have live services up and running
http://forum.xda-developers.com/showthread.php?t=912218
I've tried access to Market befor hacking and after that I made all steps and Market works.
I just want to share my experience regarding re-activation of windows phone 7 using the same key.
I flashed WP7 rom on Nand, got activation key from microsoft and using this key activated the wp7 successfully, Due to some reasons i reverted back to andriod (Flashed on NAND). After few days i flashed windows phone 7again and tried to re-activate the windows using the same old key but i was not successfull. Following are the step which i perfomed to get it working
1. Set date and time on you device before activation.
2. Logon on to windows live account and from devices tab remove the existing device from the account. (once you activate your WP7 it will automatically be added in your live devices list)
3. Enter the key and Activate windows .. it will work.
Hope this will help
thanks, I may not need it right now, but I'm planning on doing a fresh reinstall of WP7, I'll let you know if it's working or not for me
I went into zune, and deleted my device. I tried to go into the market and it says try again later. I go into XboxLive and it asks me to log in, when entering my email and activation code, I get an error message, anyone else?
And what happens if you buy a used HD2 that has already been activated for WP7...like I'm thinking of doing. Can you get an extra activation code from M$ or will they tell you to get lost as that IMEI number will already have been used? Thanks !
webvan said:
And what happens if you buy a used HD2 that has already been activated for WP7...like I'm thinking of doing. Can you get an extra activation code from M$ or will they tell you to get lost as that IMEI number will already have been used? Thanks !
Click to expand...
Click to collapse
You can't use the HD2 imei to get a code from MS anyways... they don't support wp7 on the HD2. Find a HD7 imei to give them if they ask for imei. I know a couple I could give you if you need one. PM me if you do.
i've flashed many times wp7 in my hd2 and my first code works always!!!Try it after a HR and also after a wp7/wm6.5/wp7 again...The same key has "reactivate" my leo at last 3/4 times!!
zarathustrax said:
You can't use the HD2 imei to get a code from MS anyways... they don't support wp7 on the HD2. Find a HD7 imei to give them if they ask for imei. I know a couple I could give you if you need one. PM me if you do.
Click to expand...
Click to collapse
Oh I see, that's why you have to tell them you are calling from another phone? In several activation guides I saw a reference to MS asking for the IMEI but not that you had to get an HD7 IMEI.
Microsoft France never asked for my iMEI to give me my unlock code.
They only requested my name, email adress and phone number. The phone number I gave them was not the one of the card that was in my WP7 HD2 so they can't have recovered the IMEI this way
Sounds good, thanks, all I need is an HD2 now to put that into practice!
I am having difficult time turning my HD2 to Hd7
Everything is OK except for HTC Connection Setup
it says same thing: "Carrier doesn’t exist in the database
Can someone please help me with this problem and what i need to do to make my HD2 turn into HD7?
Thanks in advance
You have toinstall XMODDeployer.xap, that app will deploy the correct settings to change the phone into a HD7 to My Ringtones. Use TouchXplorer to copy those settings to the Windows-folder. Then run HTC Connection Wizard and it will pass everything and work like a charm.
thanks for the reply Silberpfeil3110
I already did the steps above
this is what i did
unlock the phone with ChevronWP7
run Tom XAP Installer as a administrator
install XBMODDeployer
install TouchXplorer
on the phone i launched XBMODDeployer which copied the CustClear.provxml to ringtone. I copied that to the windows folder using TouchXplorer
then i launched the Htc connection setup
same problem
"Carrier doesn’t exist in the database"
any idea what the problem is ?
I had the same problem...and the only way i changed the registry settings was t side load "TOUCHXPERIENCE REGISTRY EDITOR". A little tedious at first, but worked. Now, i have everything working and when i need to do a registry tweak, i don't have to us any deployer, i just go straight to the entry and edit. Hope this helps.
You can get it on the webiste...just google it.
guamhtc said:
I had the same problem...and the only way i changed the registry settings was t side load "TOUCHXPERIENCE REGISTRY EDITOR". A little tedious at first, but worked. Now, i have everything working and when i need to do a registry tweak, i don't have to us any deployer, i just go straight to the entry and edit. Hope this helps.
You can get it on the webiste...just google it.
Click to expand...
Click to collapse
Thanks for that information
thanks for the info
i downloaded the TOUCHXPERIENCE REGISTRY EDITOR but when i unzip the file
the setup is xml document
i don't know what to do at this point and also not sure if i got the right file
please give me a little bit more info
thanks
joee1 said:
thanks for the info
i downloaded the TOUCHXPERIENCE REGISTRY EDITOR but when i unzip the file
the setup is xml document
i don't know what to do at this point and also not sure if i got the right file
please give me a little bit more info
thanks
Click to expand...
Click to collapse
Most of the packaging programs like 7zip can open *.xap files because they are also only archives. Make sure that you don't open that *.xap file ^^
You can open xml-documents by using notepad.
thanks for the help
I manage to install the TOUCHXPERIENCE REGISTRY EDITOR xap in my phone
Can please help one last time with the REGISTRY EDITOR
How do I turn my htc hd2 into hd7
Thanks again for all your help
joee1 said:
[...]
same problem
"Carrier doesn’t exist in the database"
any idea what the problem is ?
Click to expand...
Click to collapse
The problem is that Connection Setup doesn't have any data for some of the smaller carriers. You could just borrow someone else's sim card to activate it and switch back to your own afterwards.