Hi,
Data Crashes. Please contact your service center.
I tried unlocking and now it comes up with the above error.
How do I hard reset?
How do I fix it?
Please help!
Thanks
MC_Bob
Only one fix for that I am afraid contact http://www.imei-check.co.uk/
Will cost you about £30 but your device will be both sim and cid unlocked. Make sure they cid unlock it for you as well.
btw what rom do you have and whats the ipl/spl numbers if you can still get to this info and what did you try and unlock the device with?
I just fixed it with hard reset. Phew!
Tmobile ROM.
And its g4 chip
I tried unlocking again.
When I put my o2 card in it says, network is locked. Please input unlock code :S
What is it?
Thanks
mc_bob said:
I just fixed it with hard reset. Phew!
Tmobile ROM.
And its g4 chip
I tried unlocking again.
When I put my o2 card in it says, network is locked. Please input unlock code :S
What is it?
Thanks
Click to expand...
Click to collapse
Well you are fortunate to get out of that one - I would be careful
When you unlocked your device I assume you used lokiwiz 0.3a you should have got a simunlock number - it would have come on the screen use that.
It just disapears before I can read anything?
Does it save a log file so i can find the code?
Thanks
Did you unzip lokiwiz to c:\lokiwiz rather than run it from desktop?
Be back in a mo just checking my lokiwiz to see if it has a logfile
meschle said:
Did you unzip lokiwiz to c:\lokiwiz rather than run it from desktop?
Be back in a mo just checking my lokiwiz to see if it has a logfile
Click to expand...
Click to collapse
Ok thank you
Cant see a log file but with mine it does stay on screen and says press key to exit.
meschle said:
Cant see a log file but with mine it does stay on screen and says press key to exit.
Click to expand...
Click to collapse
Damn, so What should I do?
Kinda stuck
Can I re unlock it?
I also cant seem to lock the phone. Says files are in use.
MC_Bob
Did you copy and run enablerapi.cab on your device? Found in lokiwiz\utils
meschle said:
Did you copy and run enablerapi.cab on your device? Found in lokiwiz\utils
Click to expand...
Click to collapse
Yup,
Im going to try again, but print screen and get the code.
There must be another way!!!
mc_bob said:
meschle said:
Did you copy and run enablerapi.cab on your device? Found in lokiwiz\utils
Click to expand...
Click to collapse
Yup,
Im going to try again, but print screen and get the code.
There must be another way!!!
Click to expand...
Click to collapse
Disable any firewalls and antiviral and make sure your device is properly activesynced.
You posted in the lokiwiz 0.2b thread - are you using lokiwiz 0.3a? here http://forum.xda-developers.com/viewtopic.php?t=50768
0.2b is not for your device.
I was indeedy!
Ill use 0.3 and post back.
**feels stupid **
Oooh it worked.
Just needed to enter the code!
I feel stupid but better
Thanks
mc_bob said:
Oooh it worked.
Just needed to enter the code!
I feel stupid but better
Thanks
Click to expand...
Click to collapse
Congrats
Related
It is possible to change the first image what it appears on the start??
IRREAL said:
It is possible to change the first image what it appears on the start??
Click to expand...
Click to collapse
Hopefully I have the answer for you tomorrow! I'm almost there!
rvbcrs said:
Hopefully I have the answer for you tomorrow! I'm almost there!
Click to expand...
Click to collapse
Any luck?Waiting for your results.
here it is, pls check.
The attached file refuses to open? - any chance you can re-upload it after checking if something is wrong? - Mike
Same problem for me - I cant open the zip as Winzip says it "cannot open the file, it does not appear to be a valid archive"
I am keen to change my boot screen because I want to try something I read in another forum. The idea is to add your contact details at that point.
It will be more difficult for a theif to change than the "display identification information when device is turned on" option and a hard reset shouldn't remove it!!
I hope someone finds a way soon.
I used WinRAR to unzip it and that works fine.
just change the .zip in .rar, it will work.
biranouran said:
here it is, pls check.
Click to expand...
Click to collapse
Ok..perfect!
I must now unlock the CID..someone has the necessary tools??
so far i guess you can only unlock the CID by paying imei check... Sorry
hm.
im try this utility with 2 example images and no result, my boot screen dont change
htc p3300, unlocked, 2 files copyed to windows folder, cab file installed, soft reset... no result, what can i do?
Nothing changed ... Anyone get this "thing" to work?
Cheers 8)
My M700 don't change as well
Hi,
This is not my first post (my previous account missed ?) ....
My question is how to set up simlock that has been removed ? I have lock_backup.bin file. I need to set it again becouse it is broken and I have to take it back to warranty.
Can anyone help me ?
MJ
You can SIM lock your phone again with lokiwiz 0.2b.
Junner2003 said:
You can SIM lock your phone again with lokiwiz 0.2b.
Click to expand...
Click to collapse
And where I can find any doc / readme for this operation ?
http://forum.xda-developers.com/showthread.php?t=265928
Junner2003 said:
http://forum.xda-developers.com/showthread.php?t=265928
Click to expand...
Click to collapse
This is about unlocking, and I want to LOCK my wizard....
miszka_real said:
This is about unlocking, and I want to LOCK my wizard....
Click to expand...
Click to collapse
LOKIWIZ can SIM lock your phone again in exactly the same way you unlock it! You will see different options on your screen while running it:
"PRESS 'U' for unlock"
"Press 'L' for lock"
... and so on!
Attached is the HTC utility used to set an arbitrary simlock code on an unlocked Hermes. Follow the included directions, copy config.dat, IMEI_MAPPING_TBL.txt, and hermimg.nbh to a formatted storage card and reset to bootloader mode. The utility will begin automatically. It will not overwrite your ROM.
Notes: I've patched the utility to bypass the security checks.
Analysis of hermimg.nbh reveals that there is significant functionality available besides just simlocking, including IMEI changing and CID locking/unlocking as well as numerous diagnostic routines. It seems that the config.dat file contains the data that determines which function to run. I've been working on reverse engineering the format, but progress has been slow. This is why I am releasing this utility. I invite the more technical members of the forums to take a stab at this and see if we cant unlock this functionality.
EDIT: Attached is now a patched version of the Athena simlock utility. I have no Athena to test this on, so would someone please confirm or deny that this works?
enjoy.
fluxist
Athena utility posted
Just posted the Athena utility.
fluxist
Does this mean that you can change the imei of a hermes or an athena?
No
No, not at this time.
fluxist
fluxist said:
more versions to come
Click to expand...
Click to collapse
kaiser?
So all i have to do is use this program to lock sim? then send back to ATT?
I wouldn't be so sure if any of this works WITHOUT first patching the radio ROM to a seclevel 0 one
Also the SPL should be patched to skip signature checking in NBH files.
I just got a brand new Hermes with stock everything. I'll verify this all again to see what happens.
@olipro: this works with normal stock radios. below is a photo of the result with radio 1.51.
@pof: I believe the first time i used this was on a stock SPL and i had no problem. i'd like someone else to confirm this since i used spl 1.01 during my last test.
can i get a hallelujah in the back?
fluxist
You have my Congrats!!!! and we appriciate the inovative contributions you've made to this forum recently! Keep up the great work....
Waiting for your mail...
flux..
I am waiting for your mail with the Artemis version. I PMed you with my email address.
AD10 said:
flux..
I am waiting for your mail with the Artemis version. I PMed you with my email address.
Click to expand...
Click to collapse
It is possible to patch also the Artemis simunlock?
Is very interesting...
Thanks in advance.
fluxist said:
<cut>
Attached is now a patched version of the Athena simlock utility. I have no Athena to test this on, so would someone please confirm or deny that this works?
enjoy.
fluxist
Click to expand...
Click to collapse
Tried on non-SPL patched (with original SPL) Athena. Not working.
It didn't work, any suggestion
Hi,
I have a HTC 8525. upgraded to WM6
I did exactly as you posted.
during the boot load it showed 'loading' and that was it.. I didn't get the screen as you showed.
I tried the SIM lock code that came up on the file on the 'IMEI_MAPPING_TBL.txt' but it didn't work,
since my try count is on 7, I'm starting to get afraid of locking it forever.
any suggestion?
i'm using windows vista (does it make any diference?)
thanks.
Urgent help
HI AS YOU SAID I NEEDED TO INPUT MCCMNC BUT I HAVE SOME CINGULAR 8525 HERMES PHONE LOCKED TO CINGULAR, I have sim and cid unlock with something v.3 and also upgrade it in spanish to windows mobile 6, I want to unlock it with a telcel sim and I was looking for MCCMNC for Telcel which I found it and cingular but there are many MCCMNC cingular numbers, which MCCMNC do I have to input TELCEL as the actua sim I want to insert, Cingular which is locked to and if its which Cingular.
And where do I find bootloader because my phone doesn´t have any of this type I hope you could show me the answer please. I´m
fluxist said:
Attached is the HTC utility used to set an arbitrary simlock code on an unlocked Hermes. Follow the included directions, copy config.dat, IMEI_MAPPING_TBL.txt, and hermimg.nbh to a formatted storage card and reset to bootloader mode. The utility will begin automatically. It will not overwrite your ROM.
Notes: I've patched the utility to bypass the security checks.
Analysis of hermimg.nbh reveals that there is significant functionality available besides just simlocking, including IMEI changing and CID locking/unlocking as well as numerous diagnostic routines. It seems that the config.dat file contains the data that determines which function to run. I've been working on reverse engineering the format, but progress has been slow. This is why I am releasing this utility. I invite the more technical members of the forums to take a stab at this and see if we cant unlock this functionality.
EDIT: Attached is now a patched version of the Athena simlock utility. I have no Athena to test this on, so would someone please confirm or deny that this works?
enjoy.
fluxist
Click to expand...
Click to collapse
will it work with htc touch dual? is it safe to use?
thaks
morshwa said:
will it work with htc touch dual? is it safe to use?
thaks
Click to expand...
Click to collapse
you have to patch HTC Touch Dual simlock utility as well
what about hd2?
thanks!
For htc hd2 (leo)?
i've buy in the spanish, is vodafone. where i can do?
So i got the code from t-mobile today so that i can carrier unlock my HD2, i do not have another carriers sim card though, so is there a way to get to the input unlock code screen without a different sim card?
go into windows folder and run simlock.exe
samsamuel said:
go into windows folder and run simlock.exe
Click to expand...
Click to collapse
awesome, thanks for that! should i remove my t-mobile sim card first?
nah, should be fine.
samsamuel said:
nah, should be fine.
Click to expand...
Click to collapse
perfect! just unlocked it! thanks for the help!
Thanks for the tip on SIMLock.exe. Requested an unlock from T-MOUS Online Chat, 14 hours later I have my code and it's good to go for travel. Opened File Explorer, browsed to SIMLock.exe, and ran it. Entered the code, and it's unlocked. Didn't remove my SIM or soft reset.
cyanprinter said:
Thanks for the tip on SIMLock.exe. Requested an unlock from T-MOUS Online Chat, 14 hours later I have my code and it's good to go for travel. Opened File Explorer, browsed to SIMLock.exe, and ran it. Entered the code, and it's unlocked. Didn't remove my SIM or soft reset.
Click to expand...
Click to collapse
no worries. You will probably want to get a copy of the regular hd2 'connectionsetup.cab'.
The tmo one only includes t mo settings, leaving you to set up other networks manually, , , , unless you use teh regular .cab, which has settings for most of the world.
1. How I can upload DEV_UNLOCK.cab to locked HTC phone ?
2. ISV cleanup update what does if I have RTM build 7720.68 ?
My phone stays with 7720.68 after cleanup. It took 3 min is it normal ?
Thanks for answers.
marek1 said:
1. How I can upload DEV_UNLOCK.cab to locked HTC phone ?
Click to expand...
Click to collapse
You'll find everything you need here:
http://forum.xda-developers.com/showthread.php?p=17306513#post17306513
marek1 said:
2. ISV cleanup update what does if I have RTM build 7720.68 ?
My phone stays with 7720.68 after cleanup. It took 3 min is it normal ?
Click to expand...
Click to collapse
Same here, dont' worry ...
sorry i still dont understand how the dev_unlock works..after we send it to the phone via cab sender phone loads up then what do we do now? i know it cannot be rebooted ??
8007001F just got this error trying to send it
if you upgraded to final Mango and phone is locked, first you must send remove unlock cab
when this finish, delete remove unlock cab and send unlock cab to phone...
if this not work, only solution is hard reset (settings - about - reset my phone)
dxdy said:
if you upgraded to final Mango and phone is locked, first you must send remove unlock cab
when this finish, delete remove unlock cab and send unlock cab to phone...
if this not work, only solution is hard reset (settings - about - reset my phone)
Click to expand...
Click to collapse
how come remove unlock cab first?
because, BTTF ROM is already unlocked.... and something mess up with mango upgrade and you must first remove old unlock then unlock again... luckily we have 2 options for again unlock: hard reset or cab files... you can do what you want but only with cab files you not loose data on phone
I can upload to locked device the "DEV_UNLOCK.cab" without any problems ?
Just send the CAB via SENDCAB app ?
stop asking and try already dont worry, device not locked... just something messed up when upgraded...
dxdy said:
stop asking and try already dont worry, device not locked... just something messed up when upgraded...
Click to expand...
Click to collapse
I am asking what if I will somehow have normal locked device, can I only send the DEV_UNLOCK.cab to device, nothing else ?
Please give me the answer, that's only what I need.
I have unlocked [ I hope ] but I want it know from the teoretical point.
Thanks.
sorry , what you mean locked device?
marek1 said:
I am asking what if I will somehow have normal locked device, can I only send the DEV_UNLOCK.cab to device, nothing else ?
Click to expand...
Click to collapse
no... cab files is only for custom ROM's...
and this section of forum is for HTC HD2 and logically we suppose you have this device... HD2 use only custom ROM's... next time when you asking question, try this in correct forum section depend to device and write more information (device name, version of software (ROM)
dxdy said:
no... cab files is only for custom ROM's...
and this section of forum is for HTC HD2 and logically we suppose you have this device... HD2 use only custom ROM's... next time when you asking question, try this in correct forum section depend to device and write more information (device name, version of software (ROM)
Click to expand...
Click to collapse
Ok, Thanks for the aswer that CAB files are only for custom ROM's.
This I didn't know.
Yes, I got HD2 you can see it in my signiture.
but BTTF v2 ROM is custom ROM and is already unlocked and sending cab-s work....