Related
I just recently bought a Rogers HTC Magic, rooted the phone, and unlocked it. Everything seems to work completely fine. At the moment however, I seem to be having an issue with a Bell Mobility sim card. Bell's HSPA sim works fine, and I seem to be able to use voice and data ok, but the problem lies in that their seems to be a roaming symbol ("R") on my reception bar. Im using the phone in my local calling area which is somewhat misleading to me.
Im using MyHero 2.0.5 ROM at the moment. Does anyone know why this is happening? Thanks in advance!
Agreed
I'm doing the same thing. I'm running cyanogens roms and I get the same thing. Best I can tell is that this is normal on the magic. Just be careful if you live near the border like I do.
I figured this was normal too. I guess i'll try other SIM cards to see what they say as well, thanks!
Ya I also have this phone running on Bell, wish I could get rid of the roaming. It also asks if I want to connect once in a while too.
Shouldn't the romaing be dictated by the sim? I have a bell sim, on the bell network, why do I get the roaming icon? is there a way to change the phone so it doesn't think it's a rogers and not roaming or something?
Are you sure you have the Bell APN Settings and not the Rogers Settings in the phone?
Settings -> Wireless Control -> Mobile Network Settings -> Access Point Names
If it says Rogers you're Roaming on the Rogers Network.
I put in the bell APN. I don't think we can even roam on rogers network, wouldn't work. Either way, it's the Bell APN.
I don't have a clue as to the differences between Bell and Rogers sims... but I can tell you that my HTC Magic, on Rogers, with a Rogers sim (duh), running Amon_RA's most excellent RAv1.6.2H only shows roaming when actually roaming.
I was in the US yesterday and watched it flip from a Rogers tower to ATT. I was watching to make sure it was not using any data when roaming on a US network. The symbol, lockscreen info and the carrier listed in the status pulldown all were updated correctly.
It might have something to do with the ROM you are running. However I bet that given the phone came from Rogers, it has some carrier info buried somewhere that it is comparing to the carrier you are on (Bell) and triggering the roaming status.
If you disable data when roaming in the settings menu, what does it do? If it disables data, then the phone thinks it is roaming, which would support my carrier data mixup theory.
I will try a different rom on the phone. Unless someone knows for sure what I can do to fix this.
If you disable roaming there is no data, because once in a while it prompts to connect, if you say no, you get nothing. Sometimes my wife must accidentally hit no (its her phone, she probably says no cause shes not sure what it does). I just want to make it so she does not get the prompt ever (settings are all set).
I have a rogers HTC Magic (unlocked) I'm using a fido sim, it thinks its roaming as-well but I have only fido apn settings. It only roams with certain roms and radio's. I can use alot of roms eg. cyanogen,Hero HOFO 308,GYD 2.1.1 without roaming but when I update radio and flash cursorsense roms it thinks it is roaming. I have to enable data roaming in order to get a 3G signal. as a fido user I dial *#123# to see if I'm in my local zone zone. A fido tech rep told me that most unlocked phones indicate roaming because of the phones hardware programing. The hard programing of the phones checks the sim and sees that it is using a diff sim card and starts indicating roaming when in fact you are not. A rogers salesman also told me the same thing. He said as long as your carrier is displayed on your phone homescreen then you are good.
I have the AT&T Tilt, not running the AT&T ROM. I've tested a few different SIM cards on my phone and here's what I've found:
Rogers: Roaming works correctly. In Canada, no roaming indicator, in the USA, roaming is indicated correctly.
Telus & Bell (HSPA): Roaming indicator always on.
I've heard that this may be due to the SIM card listing more than one Mobile Network Code: 302361, 302653, 302657 (original Telus CDMA networks, not compatible with the phone or any kind of SIM-based network so it's uncertain why it would be on the SIM card), PLUS the HSPA network code 302880. It's possible that the phone is not reading that far into the list on the SIM and therefore does not know that 302880 is a home network.
Tilt 2 Roaming Triangle and telus
I'm on Telus and have a Tilt2. The original ROM that came with the unit didn't show the roaming triangle. I have attached some screen captures of the ROM. I've attached a copy of the registry (Remove the .cab it was the only way I could get it to upload).
I'm now running Jackos rom and it does show the roaming triangle.
Hopefully somebody can find where the settings are located and hopefully it's contained in the registry.
Have the same problem on the Stocks ROGERS 1.5 Rom. Sales associate said you should not get roaming charges since you aren't actually roaming and if you do, just contact your phone provider.
rogers htc dream unlocked now on roaming?
i also have a htc dream from rogers unlocked not rooted and my bell sims card works like my phone calls and my text but i can't get my data to work and when i click on the apns theres not thing and i am not able to adjust anything in there, if anyone can help it would be great, so pretty much the bell sims card works but i cant use my data and it says im roaming
hol17 said:
Have the same problem on the Stocks ROGERS 1.5 Rom. Sales associate said you should not get roaming charges since you aren't actually roaming and if you do, just contact your phone provider.
Click to expand...
Click to collapse
i also have a htc dream from rogers unlocked not rooted and my bell sims card works like my phone calls and my text but i can't get my data to work and when i click on the apns theres not thing and i am not able to adjust anything in there, if anyone can help it would be great, so pretty much the bell sims card works but i cant use my data and it says im roaming
Click to expand...
Click to collapse
If you aren't outside of Canada and you get the roaming symbol; they can not charge you roaming fees.
Roger and Telus PLMN Compared
I'm not sure if this will help,
I have attached a picture of the PLMN from a Rogers sim and a Telus sim
Maybe someone knows how to adjust the information on these lists.
Dave778 said:
A fido tech rep told me that most unlocked phones indicate roaming because of the phones hardware programing. The hard programing of the phones checks the sim and sees that it is using a diff sim card and starts indicating roaming when in fact you are not. A rogers salesman also told me the same thing. He said as long as your carrier is displayed on your phone homescreen then you are good.
Click to expand...
Click to collapse
The phone companies in Canada must be less uptight about unlocked/rooted phones
If you asked those questions to a t-mobile or at&t rep, they would straight up refuse to talk to you
American cell phone companies are still stuck in the "Ma Bell" mentality, where everything that touches their network must be under their control
anyone figure out a fix? I'm having these roaming issues as well on the bell network with unlocked at&t phone.
I have Same probleme Here, Bell on a AT&T Tilt 2 phone, Always get Roaming message.
any registry edit or mod available to make it work without these message ?
thks
BiOs2k said:
I have Same probleme Here, Bell on a AT&T Tilt 2 phone, Always get Roaming message.
any registry edit or mod available to make it work without these message ?
thks
Click to expand...
Click to collapse
I searched around to a fairly moderate extent and I have found many people with the same problem, yet I can't find any resolution to this issue.
I'm not even sure where the issue lays. Is it with the hardware/firmware? SIM card? Windows Mobile? Is it the rilphone.dll? or maybe some registry entry. Maybe it's on the Bell network side?
Someone told me they put a Rogers SIM into their Fuze and it didn't show up as roaming, yet when they put a Bell SIM in, it's back to roaming. So what's the difference between Bell and Rogers?
Here's a question for anyone who has this problem, when you boot android does it still show as roaming?
Hi guys, i have already searched the forums and cant find anything related to my title. Basically i would like to know if i could use my hd2 on at&t 3g network and how can i do it. I know i can unlock my hd2 by asking t-mobile but would it work on at&t? Thanks in advance
yeah it works on at&t network but not as 3g. It gets E which is the edge. If you search the forum there's a cab file that will program the phone so you can use data connection with at&t network. I got my phone unlocked via tmobile and have been using it with at&t for a couple weeks now without any problems.
SO you are basically saying that i can do anything i can already do with the phone on t mobile on at&t but except have 3g? So i would have to use edge as my data connection for internet? And how does sms work? Any settings to change to get it to work?
Install this cab file, its all you need to do
http://www.mediafire.com/?kmlmn4wt35m
These are the att settings everything will just work
on att, you can use gprs/edge , but of course no 3g
You have to have T-Mobile account to get the HD2....they don't sell them unlocked... after 40 days of use on a t-mobile account, t-mobile customer service will provide youw ith an unlock code, not before...
mearsfan5 said:
You have to have T-Mobile account to get the HD2....they don't sell them unlocked... after 40 days of use on a t-mobile account, t-mobile customer service will provide youw ith an unlock code, not before...
Click to expand...
Click to collapse
I'm wondering, if the radio can be flashed to support AT&T 3G band, or components are different...
alexsemi said:
I'm wondering, if the radio can be flashed to support AT&T 3G band, or components are different...
Click to expand...
Click to collapse
No, can't be flashed to work on AT&T 3G. You would have to get the Australian Telstra 9193 model which uses the 850 band that AT&T uses. That's the only way to use AT&Ts 3G with the HD2. The bands are set in the hardware.
digitallysick said:
Install this cab file, its all you need to do
http://www.mediafire.com/?kmlmn4wt35m
These are the att settings everything will just work
on att, you can use gprs/edge , but of course no 3g
Click to expand...
Click to collapse
Is there any settings/cab file for Rogers network in Canada?? Any help would be appreciated. Thanks
desiplaya172 said:
yeah it works on at&t network but not as 3g. It gets E which is the edge. If you search the forum there's a cab file that will program the phone so you can use data connection with at&t network. I got my phone unlocked via tmobile and have been using it with at&t for a couple weeks now without any problems.
Click to expand...
Click to collapse
how did you get the unlock code from t-mobile before 40 days of activation. That is what they told me when i asked for the unlock code. could you please share the secret....
mearsfan5 said:
You have to have T-Mobile account to get the HD2....they don't sell them unlocked... after 40 days of use on a t-mobile account, t-mobile customer service will provide youw ith an unlock code, not before...
Click to expand...
Click to collapse
this is incorrect. anyone can get the hd2 without contracts @full price of 450 plus tax. they will also unlock it in 1 to 5 days if you paid full price.got mine from wirefly, and had it unlocked in 2 days.
miguel4u2 said:
Hi guys, i have already searched the forums and cant find anything related to my title. Basically i would like to know if i could use my hd2 on at&t 3g network and how can i do it. I know i can unlock my hd2 by asking t-mobile but would it work on at&t? Thanks in advance
Click to expand...
Click to collapse
i have unlocked my t-mobile htc hd2 and used on att network, all works fine but not 3g.
alsalahi said:
i have unlocked my t-mobile htc hd2 and used on att network, all works fine but not 3g.
Click to expand...
Click to collapse
I have an HD2 on AT&T and everything works, but not fine! If I am browsing the internet and the phone tries to update the weather or mail, really anything else that accesses data in the background it will stop my data connection everywhere. It seems the only way to fix this is a hard reset sometimes, at the very least I have to exit the browser, open the task manager, kill everything, and turn off the data connection in the wireless controls and turn the data back on... My questions to the others who are using this phone on AT&T are 1) are you experiencing the same problems? 2) What did you do to fix this. I have installed the above mentioned cab file for settings and I have also manually entered the settings. I would love the phone even though it only has EDGE except it cant hold a data connection for more than 10 minutes at a time.
profclean2000 said:
I have an HD2 on AT&T and everything works, but not fine! If I am browsing the internet and the phone tries to update the weather or mail, really anything else that accesses data in the background it will stop my data connection everywhere. It seems the only way to fix this is a hard reset sometimes, at the very least I have to exit the browser, open the task manager, kill everything, and turn off the data connection in the wireless controls and turn the data back on... My questions to the others who are using this phone on AT&T are 1) are you experiencing the same problems? 2) What did you do to fix this. I have installed the above mentioned cab file for settings and I have also manually entered the settings. I would love the phone even though it only has EDGE except it cant hold a data connection for more than 10 minutes at a time.
Click to expand...
Click to collapse
Well due to the type of connection that EDGE is, you cannot be on the internet and talk on the phone at the same time. This would also go for all applications that use the data connection...only one at a time. This was the case on the pre-3G phones like the HTC Wizard (Cingular 8125).
alsalahi said:
i have unlocked my t-mobile htc hd2 and used on att network, all works fine but not 3g.
Click to expand...
Click to collapse
i am using the same phone. unlocked it and used att isp to use network. it shows E as edge network but sometimes it shows G in it. i dont know why but it shows G in some places and works better.. does anyone know what is that and why it happens. can i do anything to get G everytime? i use my phone in texas USA
praym said:
i am using the same phone. unlocked it and used att isp to use network. it shows E as edge network but sometimes it shows G in it. i dont know why but it shows G in some places and works better.. does anyone know what is that and why it happens. can i do anything to get G everytime? i use my phone in texas USA
Click to expand...
Click to collapse
The phone cannot and will not get 3G when used on the AT&T network, despite what your icons show...the hardware simply isn't capable. Period.
Bought my unlock code through ebay for $14.00 and had the phone unlocked in 20mins. HD2 works great now.
praym said:
i am using the same phone. unlocked it and used att isp to use network. it shows E as edge network but sometimes it shows G in it. i dont know why but it shows G in some places and works better.. does anyone know what is that and why it happens. can i do anything to get G everytime? i use my phone in texas USA
Click to expand...
Click to collapse
G = GPRS
E = EDGE
look them up on wikipedia if you want more info but.....
GRPS is older and slower than Edge, GRPS max speed in ideal conditions is somewhere i the upper double digits/ lower triple digits. You might be lucky to get into the 200kbps range with EDGE.
In the end both suck compared to being able to get tmobile's 3g signal which ive personally seen hit 5mbit/s here in tampa now that HSPA+ is deployed. Being able to get ATT's 3g might get you right around 1mbit if lucky. I dont know what if any plans ATT has for HSPA+ deployment
digitallysick said:
Install this cab file, its all you need to do
mediafire.com/?kmlmn4wt35m
These are the att settings everything will just work
on att, you can use gprs/edge , but of course no 3g
Click to expand...
Click to collapse
(edited url cause I can't post as a new user)
I used this .cab file and while I can browse the web, I can't seem to send MMS pictures using my AT&T sim, are there other settings I have to change?
EDIT: I found the answer here, after a bit more searching! Thanks all, forum.xda-developers.com/showpost.php?p=6695081&postcount=13
I just bought the hd2 and planning on unlocking it to work on AT&T. I know that I will be getting Edge instead of 3g. But can someone plz explain to me how does it work as far as data plans and mms. Do i need to have a data plan to send mms or mms will be sent through edge. and as for data and web browsing , do i have to have a data plan or since when i go online i will be on edge so i dont need a data plan
mearsfan5 said:
You have to have T-Mobile account to get the HD2....they don't sell them unlocked... after 40 days of use on a t-mobile account, t-mobile customer service will provide youw ith an unlock code, not before...
Click to expand...
Click to collapse
90 Days, unless they changed it. 3 phones unlocked, 90 days between each.
Hi,
I unlocked my MT4g a while back using gfree and now I am going to sell it. I'm on ATT now so I went to test out the MT4G and make sure it is still unlocked but I got weird results. I get a signal with my ATT SIM card and it makes calls fine but it won't connect to data at all. If I look in the network info under settings it says the provider is ATT and the network is EDGE.
I tried turning on/off airplane mode, tried unrooting my phone and flashing a stock image but nothing has made a difference. I also tried my friends T-Mo card and it connects to EDGE and HSPA just fine using that so I'm not sure what's up with it.
I did use EDGE on this phone in the past with my ATT sim card so I have seen it working before, can anyone think of anything that could be stopping it from connecting to the EDGE data now?
vashht said:
Hi,
I unlocked my MT4g a while back using gfree and now I am going to sell it. I'm on ATT now so I went to test out the MT4G and make sure it is still unlocked but I got weird results. I get a signal with my ATT SIM card and it makes calls fine but it won't connect to data at all. If I look in the network info under settings it says the provider is ATT and the network is EDGE.
I tried turning on/off airplane mode, tried unrooting my phone and flashing a stock image but nothing has made a difference. I also tried my friends T-Mo card and it connects to EDGE and HSPA just fine using that so I'm not sure what's up with it.
I did use EDGE on this phone in the past with my ATT sim card so I have seen it working before, can anyone think of anything that could be stopping it from connecting to the EDGE data now?
Click to expand...
Click to collapse
Did you check your APN settings? You may need to edit the APN setting for ATT Edge network
My girlfriend just unlocked her HTC Trophy on verizon. We put my att sim card in it, and voice/text worked great but she didn't have any 3g data, only edge.
Anyone know an apn setting so that way we can get the 3g data working on her phone?
PS, unlocking the Trophy was the easiest thing ever, vzw provided her with the code.
Thought I'd post my experience on here just because I know a lot of us are switching over and I must have gone through fifteen different threads to figure out how to get my data, talk, and text working. To start off I bought a T-Mobile nano sim and just plugged it straight into my droid thinking it would all be gravy...nope. This is exactly what I had to do: First, go into your mobile network settings and change to LTE/UTMS/GSM. Second, change your (Select Network) to GSM only. Third, create an APN that is as follows: NAME;T-Mobile, APN; epc. tmobile. com, MMSC; ht tp:// mms . msg. eng. t-mobile . com/mms/wapenc . APN Type; default, mms, supl APN Protocol; ip4/ip6. LEave everything else alone. trust me this is the most reliable way to go about doing the switch over and the data is fast, plenty fast. The phone info . apk app does work but for the ultra its not needed so don't worry with it. HAPPY SAVINGS all you DROID LOVERS.
Thanks for the help. I have unlimited Verizon with my bootloader unlocked, but I have issues with good service here where I live and work with Verizon. T-mobile may be better, so I am considering trying it out soon. I am going to test TMO for 7 days with their free program and see. If it works, I may just follow these directions and use my Droid Maxx.
Jeff
How ur work on gsm? If I out mines on gsm internet won't work. Umts is the only way mines work. I get h+ but at times its slow. Worst playing games
P.s am on metro PCs same crap lol T-Mobile all my settings r from T-Mobile
Sent from my XT1080 using XDA Free mobile app
I picked up a Droid Maxx XT1080M (Not the ultra, but they seem so.. similar....) which was unlocked.
I popped a NanoSIM into it, rebooted, and it took a minute but the device figured out to auto switch to the GSM/UMTS/LTE side of the baseband. After that the only thing I needed to do was add the T-Mobile LTE APN.
I'd check your APN and make sure it's on fast.t-mobile.com. From what I've noticed is that when I boot it up, and WIFI is off, if I am to start browsing it goes from E (edge) to H (HSPA) to LTE in about ... 2-3 minutes of browsing/using data. Then it sticks on LTE. This is not always the case as I've rebooted a few times tonight without it bumping down to EDGE.
Getting 43mbps down and 33 mbps up on LTE, and 6down/2up on UMTS/HSPA. In Seattle... This device hits the sweet spots for T-Mobile LTE bands with 1700/2100. We'll miss out on their 1900 build-out, but should still have HSPA+ on those other bands anyway.
One odd message I get after every reboot is The SIM card is from an unknown source. does not seem to affect anything. Anyone know if this is normal? I've not seen this error before on other unlocked devices.
I am on metro, I don't have that issues at all. I pop in Sim, did a apn n wallah 4g LTE n every work fine took me a hot minute to figure out how to get LTE to work.
The Sim car error is Cuz its a Verizon fone. It doesn't effect the fone at all. Once we get root n we get to flash I know we won't c that no more.
Sent from my XT1080 using XDA Free mobile app
Sadly, my phone seems to have a borked radio.
What happened? So I popped in T-Mobile SIM card, and calling and texting is a charm. (Except for the Unknown SIM issue, of course.) I then found out that I was getting NO data after a factory reset. So then I looked to downgrade OS version, blah blah, flashed radio, did fastboot config carrier, so on and so forth. No joy. Sigh...
EDIT: Just realized I revived the topic...
mr_verystock said:
Sadly, my phone seems to have a borked radio.
What happened? So I popped in T-Mobile SIM card, and calling and texting is a charm. (Except for the Unknown SIM issue, of course.) I then found out that I was getting NO data after a factory reset. So then I looked to downgrade OS version, blah blah, flashed radio, did fastboot config carrier, so on and so forth. No joy. Sigh...
EDIT: Just realized I revived the topic...
Click to expand...
Click to collapse
Verizon has changed something in the system part of the most recent ROMs to prevent t-mobile use. I had the same issues. For some, I could bypass the block by removing some of the CDMA references in build.prop. For the most recent Verizon ROM, nothing I tried worked.
Luckily, I am unlocked. Moved originally to a ported Moto X ROM, and then to CM12, and everything works fine there.
That's odd, I'm on the latest build and have 0 issues with Tmobile.
I just plugged my T-Mobile nano sim in last night and used the instructions on this thread and a few others around the internet to get T-Mobile 4GLTE or HSPA+ to work. I can text, make calls, and I get all the Edge (shown as an "E") data i want, but It is way to slow to be useful. I have tried it on both my droid maxx phones (one 2013 - 32gb, and one 2014 - 16gb). Both are on latest system version 24.3.7. Any other advice to make data work decent? I can get NO 4G or HSPA+
Does tmo say you have wcdma or LTE access where you are.
I am having the same issues after FDR and data wouldn't work anymore. In my area I am LTE so the droid ultra that worked well in the last 4 months on T-Mobile, I think it is a software problem.
Yes it is software problem. If you can get your phone rooted and bootloader unlocked then reflash the rom it works perfectly. I get LTE on tmobile on the CM rom no problem.
I run LTE just fine.. All I needed to do was add T-Mobiles APN to my phone..
Sent from my XT1080
I also left it on "Global"
Sent from my XT1080