[Q] Defy flashed but will not boot - Defy Q&A, Help & Troubleshooting

I managed to flash my defy but when rsd said pass it would not reboot?
any ideas on a fix for this, do i need to flash a higher version?

What do you mean with 'does not boot' ?
Are you stuck in a bootloop or with the red motorola logo?

nothing happens only white led comes up, even tho it says passed

Any help please

What image did you flash, did you try to re-flash?
Are you able to enter the recovery menu? (pull out the battery, unplug USB and keep 'vol down' (or was it vol up?) pressed while hitting the power button)

please help me i also have this problem
I flashed my defy to android 2.3.6 and after that because of some problem I flashed back to 2.3.4 (Im new user and I didnt know its not possible to downgrade) and then my defy never boot up and never go to recovery or boot menu .I have the full chartered battery ( I can charge battery directly with special charger like Mcgyver battery fix) but when i flashed my phone with rsd lite it never boot up and screen shows black pages always please help me ( what can i do?

Flash 2.3.6 full SBF again with RSDLite. Try before, if you can access the stock recovery, to do a wipe data wipe cache

Thanks for you reply but I had flashed to 2.3.6 before but nothing happened ,I cant access to recovery menu
(

Related

Flashed Powerboost and Cant boot phone with LOW BATTERY

Emergency guys. I flashed the flashme.zip on my phone while running MIUI ICS. I have done this before with no problem but this time it made it go to a black screen when it passes the boot logo. I can get into recovery by holding down the vol key but if I flash MIUI or CM7 it doesn't fix it. I can try restoring from a nandroid but this all happened when I had 30% BATTERY!! Shows me for not thinking powerboost would matter. I can't restore using RSD Lite because the battery is low. What should I do?!
Also, will my phone charge if its on DXC's boot menu?
EDIT
I am able to boot into recovery without my battery in. I'm wiping data and going to try a nand restore.

[Q] Defy stuck at rolling logo, darkening and turn off

I'm new to android, my friend gave me this defy with android 2.3.6. When i was using it, it suddenly turned off. I removed and inserted battery to reset but it was still rolling the logo M, and after that the screen darken and turn off. I read many topics, I tried to go to stock recovery by holding volume - and power button but it stuck at M logo with no animation. I can still access the bootloader and connect to rsd.
Anybody helps me pls !
anybody helps my please
pavolusa said:
I'm new to android, my friend gave me this defy with android 2.3.6. When i was using it, it suddenly turned off. I removed and inserted battery to reset but it was still rolling the logo M, and after that the screen darken and turn off. I read many topics, I tried to go to stock recovery by holding volume - and power button but it stuck at M logo with no animation. I can still access the bootloader and connect to rsd.
Anybody helps me pls !
Click to expand...
Click to collapse
Then try doing a SBF flash if you can't access stock recovery too(seems strange) ! Now try again and do a data wipe from stock recovery(After SBF flash) next if it do not work go to service center!

help black-screen boot-loader mod

hi all, that what was happen: (really sorry for weak English)
i was in CM10 work good with some troubles like restarting sometimes even i do wipe data many times
then i try to do that http://forum.xda-developers.com/showthread.php?t=948887 to use my milestone internal memory as external SD card the phone become very slow,
i reboot it still buggy i restart in both moto recovery and CM10 recovery and do wipe cache and full wipe data
then i re-install CM10 here the phone start restarting when it come to get the home screen
i remove the battery for 30 minute then i try to start the phone
and after the moto logo i have black screen only with light and the PC detect it like in boot-loader mod (RSD lite detect it)
so i do flash it with this version
(M2L_U6_4.5.2_5127_R01_SIGNED_US1MILA2GBRETLAB125LA003.0R_STABLE45LAMILETRETLA_P005_A028_M001_HWp2a_Service1FF.sbf)
witch i use to flash my phone with it and after successfully complete the problem is the same
i do many time flash with RSD and many time wipe data and factory reset but the same problem always present
i can get boot-loader mod + recovery mode i do flash i try many other version but the phone still wont start always after moto logo i have the black screen bootloader mode with light
then when i plug my phone to charge not USB without starting it i see the battery charging in screen but when i try to start it nothing happen the same problem
after moto logo black screen
pleased help i'm really in a big trouble
No solution for me pleased
Help help help !!!!!!!!!!!!!
is the problem not clear?!! PLEASED any HELP
here is a video explaining my problem
http://www.youtube.com/watch?v=KHIZlyt6y94
any help pleased
AW: help black-screen boot-loader mod
have you tried to do a full wipe in stock recovery?
press power & x for some seconds. when you see the exclemation mark press vol plus and minus at the same time.
then do a factory reset. this will wipe all data. after that your ms2 will boot the flashed stock rom, hopefully...
plaese give feedback after trying...
edit: i saw in your video that you still have the froyo kernel. here you have to press the @ sign, when you see the exclemationmark...

[Q] Brick Defy Red lens please help.

Hi Guys sorry for mi english.
I have this defy how was looping at de cyanogen mod logo then after reading some post I wipe data and re flash everythig ( cm10,kernel, gapps and battery fix) , after that I rebooted and its now stuck at the GOOGLE logo.
I don get the blue or green light to press up and go to customer recovery also can{t get that boot loader I have seen in some thread by presin volume up and power buutton.
My phone is just stuck at the GOOGLE logo. Any help will be thanked! =)
Hi
I managed to getto boatloder, tried to install the stock sbf but it fails at RSD lite, I have read tha a wipe is need by inserting battery and holding down vol down to get to motorola recovery.
I tried that but after the holding volume down and insterting the battery i get the same bootloader screen.
Is there another wipe to wipe the data or im doing something wrong?
please help me =(
AW: [Q] Brick Defy Red lens please help.
rsd detects your phone? what does it say when you try to load the sbf?
lateraluis said:
Hi Guys sorry for mi english.
I have this defy how was looping at de cyanogen mod logo then after reading some post I wipe data and re flash everythig ( cm10,kernel, gapps and battery fix) , after that I rebooted and its now stuck at the GOOGLE logo.
I don get the blue or green light to press up and go to customer recovery also can{t get that boot loader I have seen in some thread by presin volume up and power buutton.
My phone is just stuck at the GOOGLE logo. Any help will be thanked! =)
Click to expand...
Click to collapse
If RSD recognizes your phone, you are probably safe. Try flashing different SBFs.
Sometimes, though, your flash memory is gone, so your phone will be bricked.

Wrong recovery Flashed, bootloop

So, I have was flashing TWRP recovery, everything went fine, restarted the tablet and it is stuck in the boot loop.... Then I looked into then computer and I saw i have flashed the oldest version of TWRP for ICS (and i had JB bootloader)... Now It is stuck in a boot loop and i cant even acces fastboot... I am gonna leave it like this to let it drain the battery and hope i can turn it on by holding the power + VOL - button. I am such a dic*head.... Is it recoverable? Please say it is, It was an expensive tablet and i dont wanna lose it.
EDIT: Battery drained, charged again, tried turning on with - VOLUME pressed and I just cant get to fastboot...
Please help me
thanks

Categories

Resources