[Q] XOOM HK 3G MZ601 nandroid wiped - Xoom General

Hi everyone been using the TIAMAT 2.2.2 rom and Tiamat Odachi Kernel which are fast but have been facing lots of problems getting apps from market and it only shows a very small portion of the apps on the market. Before changing rom and kernel the Market was working perfectly and able to see loads of app and install them. I wish to know if its possible to flash back to original Motorola rom and kernel? If can how? As I cannot find the ROM for HK version from motorola dev site. Please help.
TIA Eric
P.S.
The Tiamat Settings always FC. The storage for Internal is 24G but the other 4G is missing. The SD Card is working Reading atm didn't try writing to it yet.

Anyone ? Please help or am I stuck with the Tiamat rom? The app market is not updating at all and it is not letting me install even from the web. Please advise.
TIA Eric

cougarmaster said:
Anyone ? Please help or am I stuck with the Tiamat rom? The app market is not updating at all and it is not letting me install even from the web. Please advise.
TIA Eric
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1203128
Check out the above thread...these are owners of the Hong Kong Xoom and they have found some solutions to their issues. These are the guys you should be asking for help.
Good luck!

Thanks okantomi.

Related

[Q] Cyanogen Mod

please help. i have recently installed a cyanogen rom onto my htc hero and it works lovely. the only problem is there is no app market and im not sure how to get it. is there anyway i can an app market app? the link i downloaded is update-cm-6.1.0-rc1=hero-signed.zip
JiG
Hello Jamie,
because of legal issues the google apps is not included in the rom. You can find a zip to flash in the official thread of that ROM, http://forum.cyanogenmod.com/topic/11667-cyanogenmod-61-for-hero-v610-12072010/
Br,
Henrik
Reflash the rom. It comes with the market right? did you do your wipes etc? failing that, you can download a market apk i think from somewhere in 'general'. That will be the updated market anyway. I sometimes have to flash it as the older market doesnt seem to show all of my downloads...annoying when updates are avail. anyway, i'd say reflash.
Plysch said:
Hello Jamie,
because of legal issues the google apps is not included in the rom. You can find a zip to flash in the official thread of that ROM, http://forum.cyanogenmod.com/topic/11667-cyanogenmod-61-for-hero-v610-12072010/
Br,
Henrik
Click to expand...
Click to collapse
well, show's what i know! i have had it where i've flashed roms and the market hasnt installed mind....

[Q] Cyanogenmod and the market

Hi all,
I've just rooted ad installed cyanogen mod 6.1.1 on my wife's phone. So far everything works perfectly except that I cannot install anything from the market place.
Does anyone have any ideas as to why this might be?
Thanks!
Which kernel do you use?
Try other aviable kernels- some have problems with native AppsOnSd.
For sure FrozenLake kernel wirks good (download on samdroid.net), Xmister's had problems with this. Can't say how other behave- I didn't test them.
gen_scheisskopf said:
Which kernel do you use?
Try other aviable kernels- some have problems with native AppsOnSd.
For sure FrozenLake kernel wirks good (download on samdroid.net), Xmister's had problems with this. Can't say how other behave- I didn't test them.
Click to expand...
Click to collapse
same prblm here
thank you mister .
Hi.... i Have a samsung spica i5700. updated to 2.2.2 with spicagenmod-froyo-beta2....
the problem is i cant find a correct HTC keypad version for my phone.....i tried both the latest versions of v.27.... i get a error message '' the application HTC_mod (process jonasl.ime) has stopped unexpectedly"
Pls help....
If you are still looking for the keyboard, go on to the forum post and scroll until you get past the whole changelog then it says old versions. I think it's v.3, says next to it that it supports spica.
Sent from my GT-I5700 using XDA App
or install smartkeyboard

Request: Stock Rom with features

Hi, I have spent over 3 days tring to get the SE Stock ROM with xrecovery, rooted, JIT and Apps2sd. I have been able to do most but when I install Apps2sd I loose singal and dont get it back. Can someone please help me, I have really gien up, I have spent so long and I keep on making some mistake. Please some one create a Stcok ROM with the following features:
JIT
Apps2sd
Xrecovery
Root
Or if anyone has this one there rom could they back it up for me please. Thanks!!!
Hello. Give a try BehradGH rom. It's based on official 2.1.1 rom,but don't have app2sd.
tried his too, but the apps2sd looses signal and i can call after i install it. Thanks thoughh
make an ext2 partition and install link2sd: with the last update it's perfect, don't need app2sd
can you upload your rom? Please, I have spent way too long trying to get it to work I have just given up.
anyone please im depsreate!
andoridkiller said:
anyone please im depsreate!
Click to expand...
Click to collapse
Check your pm.
Sent from my E15i using XDA Premium App
thanks mate iou!

HELP - market place is not shown!

I searched this forum, found some similar issues, but none of them worked for me.
I have been using my nook color with cm7 (cm_encore_full-140.zip) from uSD card, and now I decided to install cm7 on the internal memory (emmc). I followed huskermania's guide on youtube (2gb_clockwork-0.7.img>format system/data/cache>copy and run both [update-cm-7.0.3-encore-signed.zip & gapps-gb-20110307-signed.zip]), but I am missing the market app. When I searched this forum, many people are having same problems, and I am wondering whether anyone has any idea what to do. BTW I went to setting>account&sync, but it asked to add an exchange account instead of sign-in to google. Thanks in advance for your help.
Are you using the latest version of CWR?
patruns said:
Are you using the latest version of CWR?
Click to expand...
Click to collapse
Thanks for the reply, and CWR 3.0.0.5 was downloaded from here (http://forum.xda-developers.com/showthread.php?t=922870). I actually was able to get a response from huskermania via tweet, re-install cm7 7.0.2 and problem was solved. After that, I updated it with a recent nightly build (cm_encore_full-148.zip). I hope this helps others.
txo8 said:
Thanks for the reply, and CWR 3.0.0.5 was downloaded from here (http://forum.xda-developers.com/showthread.php?t=922870). I actually was able to get a response from huskermania via tweet, re-install cm7 7.0.2 and problem was solved. After that, I updated it with a recent nightly build (cm_encore_full-148.zip). I hope this helps others.
Click to expand...
Click to collapse
ver. 3.2.0.1 is the latest version of CWR and that is what you should be using going forward. Glad you got it working though.....

[Q] MZ605, no ICS?

hi, i am from argentina and I have a motorola xoom mz605 (wifi - 3G) and i want to update to ICS, so I looked for ICS ROMs for my device, but i couldn't find one (neither Teameos nor official). I found roms for WiFi and 3G/4G verizon (and i think there is one version of teameos called everest, for mz601, or something like that) but not for my device.
Is there an official software update for my device? Or an unofficial one?
Is teameos developing a rom for this device?
Is this device fully compatible with MZ601 ROMS?
May I help to develop one? (Testing roms..)
I know there are ways to run ICs on my device, but i want to run it with 3G working
THANKS A LOT
000Gonza000 said:
hi, i am from argentina and I have a motorola xoom mz605 (wifi - 3G) and i want to update to ICS, so I looked for ICS ROMs for my device, but i couldn't find one (neither Teameos nor official). I found roms for WiFi and 3G/4G verizon (and i think there is one version of teameos called everest, for mz601, or something like that) but not for my device.
Is there an official software update for my device? Or an unofficial one?
Is teameos developing a rom for this device?
Is this device fully compatible with MZ601 ROMS?
May I help to develop one? (Testing roms..)
I know there are ways to run ICs on my device, but i want to run it with 3G working
THANKS A LOT
Click to expand...
Click to collapse
I would suggest that you do some research on the differences, if any, between the 3G service in US vs. 3G in Argentina. If they are similar than you can give team Eos MZ601 ICS a go. If they are different, you can contact team Eos and either request a ROM that supports your service there or ask how to modify it yourself. The devs at team Eos are great and if they are unable to do it for you, I'm sure they could steer you in the right direction to modify one of their current ROMs.
Thanks, Can you please tell me where i can find team eos mz601 rom and how to get in touch with team eos? I am new here... please help me
3G for MZ605 is working with this ROM:
http://forum.xda-developers.com/showthread.php?t=1443220
Some bugs on the radio icon, no OC, no root...
On the EOS_umts_everest ROM 3G for MZ605 not work
neurobashing said:
3G for MZ605 is working with this ROM:
http://forum.xda-developers.com/showthread.php?t=1443220
Some bugs on the radio icon, no OC, no root...
On the EOS_umts_everest ROM 3G for MZ605 not work
Click to expand...
Click to collapse
The mz601 rom you have linked can now run the Rogue Kuma kernel for OC and you can flash universal-root.zip in recovery to root it
Sent via Tapatalk from my 3g MZ601 (Everest) 4.0.3 AOSP, Rogue Kuma 1.5oc
thanks! at least! ICS in my tablet! WOW.
thanks a lot
now i have a problem
i can't root it, i tried with the universal root but it didn't work. it instaled the superuser app, but when an app asks for root access, it doesn't work, no superuser screen apears, and it says that the device is not rooted. can you help me again? thanks
000Gonza000 said:
thanks! at least! ICS in my tablet! WOW.
thanks a lot
now i have a problem
i can't root it, i tried with the universal root but it didn't work. it instaled the superuser app, but when an app asks for root access, it doesn't work, no superuser screen apears, and it says that the device is not rooted. can you help me again? thanks
Click to expand...
Click to collapse
Use the "Universal Xoom Root" http://forum.xda-developers.com/showthread.php?t=1242241
Only work for me before running "fastboot oem unlock" again...
Like iBuzman said, for OC flash Rogue 2.0.2 "Kuma" kernel: http://forum.xda-developers.com/showthread.php?t=1454863
Solarnz has been updated the Universal Xoom Root to work with ICS.
Try download and flash again.
Probably it'll work fine.
http://forum.xda-developers.com/showthread.php?t=1242241
Thanks! It worked, now i have root access, but now i have another problem, firewalls don't work, I tried enetraffic, avast's firewall and droidwall. Firewalls do not work in ICS, any solution? Thanks a lot for your help !
It works on wifi, but no on 3G, i need 3g firewall please if you have a solution let me know
I think now it is working. I just have to disable "mobile data limit".
It seems if mobile data limit is enabled, 3G firewalls don't work (this info may be usefull for somebody...)
Thanks a lot for your help guys !
The new release of Team EOS umts_everest is working great on MZ605.
And no problems with Market.
http://forum.xda-developers.com/showthread.php?t=1459641&
neurobashing said:
The new release of Team EOS umts_everest is working great on MZ605.
And no problems with Market.
http://forum.xda-developers.com/showthread.php?t=1459641&
Click to expand...
Click to collapse
I am giving it a try tonight ! Thanks!
Will i lose my data again? :S
000Gonza000 said:
I am giving it a try tonight ! Thanks!
Will i lose my data again? :S
Click to expand...
Click to collapse
Couldn't wait, I've already installed it, it's awesome! THANKS!!
Hi.
I have a MZ605 that had Tiamat 3.2. I performed a Factory wipe and installed Eos-umts_everest-11 and EOS_GApps_ics_4.0.3_v10.4.
It seemed to work fine but I noticed it restarts once in a while, in an hour of use it spontaneously restarted several times. Once when ending a Skype videochat, another time when loading theverge.com, and a few times more.
Has anyone had this type of issue? Any recommendations?
Thanks,
Rodrigo.
rsilves said:
Hi.
I have a MZ605 that had Tiamat 3.2. I performed a Factory wipe and installed Eos-umts_everest-11 and EOS_GApps_ics_4.0.3_v10.4.
It seemed to work fine but I noticed it restarts once in a while, in an hour of use it spontaneously restarted several times. Once when ending a Skype videochat, another time when loading theverge.com, and a few times more.
Has anyone had this type of issue? Any recommendations?
Thanks,
Rodrigo.
Click to expand...
Click to collapse
The same is happening to me, but since I installed nightly 11, with nightly 10 it didn't happen. Now i am waiting to the 12th.

Categories

Resources