I found an really good condition atrix to sell for a very cheap price, the only problem is that the home and back buttons, doesnt lit very well like the other settings and search buttons.
In galaxy S, it was just an flex cable light behind the buttons, but i didnt found this piece for atrix. its possible to fix this on atrix or i would need to replace the entire screen?
thanks!
I don't know the answer, but I suggest you go to ifixit.com and search for Atrix. That show how to dissamble an Atrix. That might help.
yeah i found 2 vids on youtube, both makes you believe that the light and the screen are the same piece. i gave up from that atrix and bought an new one
you can adjust the brightness of the buttons independantly of the screen. it is a custom option in CM7 and it is tied in directly to the brightness sensor.
Related
Hey all,
Does anyone know of any means to turn off the keyboard backlight, force it off no matter what the situation? As well, does anyone know of any hack or program one could use to force toggle the keyboard on and off?
Aside from this, does anyone have any pictures of the keyboard open? I specifically want to see how the leds are arranged in there. I want to remove the blue leds and replace them with a few white or red ones.. or, put a resistor in, so that the blue leds are EXTREMELY DIM compared to their brightness now.
It's annoying to me that the keyboard leds are so bright, that they actually outshine my main screen (which has the brightness turned down).
Any ideas, anyone?
Hi Brad,
Most of the pics available had no shot of the keyboard PCB removed... I am also looking for it. I wanted to shim the right side of the keyboard since that part is lower than the left side.
Is your keyboard keys also going a little sunk from left to right ? you need to feel/look for it hard, since it is just a matter of half millimeter.
No.. no issues with my keyboard, other than I can't even stand to look at it. I literally just can't look at it. I have to close my eyes when I type. I think I have some extreme blue-light sensitivity or something.
My Hermes is fairly new, though... but again, the keys all seem fine. I can't *see* the keys, but they feel fine.
I just refuse to stare at extremely bright and annoying painful to look at things. I mean, didn't these guys notice that the Hermes seemed to be all blurry, when the backlight was on? And really bright??
Really need help here,
My hermes suddenly decided that visuals are no longer needed.
That means the screens stays off all the time (yes even in bootloader mode).
It works, receive calls and flashes roms but in no situation can I see anything on the screen (pitch black screen).
I've got no warranty so I took it apart and checked each cable and connector - no issues were seen. I tried changing SPL-s, RUU, Roms all worked but left my tytn with that black screen.
Did anyone see this happen or has any advice?
This sucks big time :-(
No one? Oh man, I guess it's dead then :-(
Last bump before giving up and throwing it away - please?
send it to me if your gonna throw it away : - 0
I've given up on mine as well. It has white screen though. Where do I dump this thing?
If it is out of warrenty, I would take it apart as is sounds like the hardware, check the connections to the LCD. Does the backlight still work, or if you put it in strong sunlight, can you see the LCD working?
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
what are you guys willing to sell your pdas for? Mine fell in a puddle and i need one for parts. The white screen might be fixable the first couple of times but then it dies off for good, the black screen i've never heard of.
So if you want to sell for a reasonably cheap price let me know, i can buy a new keypad online for $50. So around there would be nice!
i.a.wright said:
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
Click to expand...
Click to collapse
I just tested this on mine and actually got some results.
mines the opposite though, it will NOT work with any pressure. I left all the screws loose for that board under the buttons, and left the LCD assemble screws out on that end and it works, But if I press the keys it whites out again and won't come back until I repeat the dis-assemble/re-assemble
I had a similar problem but this was after someone dropped mine on the floor. The screen would just be white screen, while everything worked. If I pressed the bottom right of the phone it would sometimes come on and stay on for a little while but would eventually always go to white screen.
I did manage to use the phone but had use a program called Net Control which allowed me to control the phone over WIFI with the phone screen shown on the PC. Got the phone replaced in the end by the people who dropped it.
i got the flex cable and my phone still has the white screen problem....wtf///
Hello,
I have a Telus branded P4000. Since I had It,one LED in the bottom left of the screen that was always full on - so there was a brighter part always on my screen no biggie.
Today I took apart my phone to see why the DPad stopped working. After I put it back together (done it many times before), I noticed my dpad still not working, but my screen was uniform again?!?!?! no one bright LED. Nice. Take what you will from that.
After that my SD card stopped working. Is that a loose connection I can check? which connection would it be? (plan on checking it over again tomorrow).
Also is there a fix for the dpad not working? all the other hardware buttons work, just not the dpad.
I am guessing since you checked the connections that the dpad is just broken and will need to be replaced. Also you have one lcd with a backlight the bright spot is a manufacturing defect not one bright LED. Most of the time the bright spot will come back and get bigger.
yep I think you are right on the nose.
is there anywhere I can get a dpad?
will one from a titan, mogul or 6800 fit into my P4000? I'm guessing so just want to make sure.
and if you have hook ups let me know
Any pad other than a xv6800 pad will work.
thanks go one on order now
So still no d-pad.
Got a brand new one. Still no d-pad, every other button around it works no problem. But the d-pad does nothing. I can feel it push, but nothing happens.
Is this a software issue? I don't want to wast money on this if it's not going to fix it
Hi,
I bought my wife a Wildfire but the softkey backlights are a bit of a pain - under both 2.1 and 2.2.
They appear to be ambient light sensitive - so they come on when it's dark and go off when it's brighter. However, it has to be really dark/dull for them to come on - and I think the sensitivity is set too low.
I can't find any way of adjusting the sensitivity - and it is not effected by the brightness controls. No way to keep them on permanently either - like my Desire HD.
I'm just wondering if the sensor is faulty or if it's just normal behaviour and we need to get used to it? it needs to be twilight with the lights off for them to come on - or really dull internal lighting. They never come on outside unless it's just about night-time.
Let me know your experiences?
Cheers - and a happy new year.
Well if it helps if anything Myne is over sensitive
Sent from my HTC Wildfire using XDA App
Im sure it is automatic and does not use the ambient light. There is no setting for this that i know of. Im sure if u just look the phone and unlock it the backlights come back on.
I believe it works with the brightness of the screen, so if you set it to automatic brightness then it'd be automatic. otherwise it'll just follow the brightness set.
I read on another forum that the sensor is behind one of the speaker grills.
That does seem to be the case; on my Wildfire, if you cover the righthand side grill, the lights come on.
The sensor seemed to be on the black screen frame - near where the notification light was. I could get the lights to illuminate by covering it up too - but as soon as pulling my finger away, they would go out.
Anyways, my big-fingered wife couldn't get to grips with the virtual keyboards on the small Wildfire - and I tried as many as I could - Swype, Better, various T9s etc. So we still had enough time to exchange the phone to a physically keyboarded Android phone - she got a SE X10 mini pro.
Thanks for all your help though...
I think its in the black strip by the htc logo
Sent from my GT-P1000 using XDA App
Screen on my G2 was totally cracked up but the LED notification light still worked. Was red when I plugged in the charger. Was green when I turned on phone.
Got the screen replaced and now the LED notification light doesn't work. Charge the phone and no red light. Turn on the phone and no green light. Options for LED is turned on.
Is the notification led integrated into the screen? So I may have a faulty replacement screen?
Also read that maybe a factory reset may work but thats a last resort to check cuz I don't feel like setting phone all up again.
On a side note..do those screen repair stores you find in the mall usually use OEM or crap quality replacements? Je told me oem but i trust no one. Noticing as I press keys as i type I see parts of screen near finger get a little darker like if u press down on a LCD screen too hard. Other than that the screen is fine so far.
vice86 said:
Screen on my G2 was totally cracked up but the LED notification light still worked. Was red when I plugged in the charger. Was green when I turned on phone.
Got the screen replaced and now the LED notification light doesn't work. Charge the phone and no red light. Turn on the phone and no green light. Options for LED is turned on.
Is the notification led integrated into the screen? So I may have a faulty replacement screen?
Also read that maybe a factory reset may work but thats a last resort to check cuz I don't feel like setting phone all up again.
On a side note..do those screen repair stores you find in the mall usually use OEM or crap quality replacements? Je told me oem but i trust no one. Noticing as I press keys as i type I see parts of screen near finger get a little darker like if u press down on a LCD screen too hard. Other than that the screen is fine so far.
Click to expand...
Click to collapse
No its not.
Its a seperate part that attaches next to the selfie camera on the logic board.
Looks like the shop was in a hurry and forgot to connect the LED
As for the screen, I can say you have an aftermarket non OEM.
OEM they use LOCA or OCA to bond the Digitizer to the LCD.
By doing so, you have no weird darker/lighter effects when typing on it.
Just like the stock screen.
If you have those effects, I would recommend you have them replace the screen with one that's OEM and not an aftermarket.
My first screen repair story went like yours only I swapped it in myself.
Come to find out the seller sold me an aftermarket screen claiming it was OEM.
I had him refund me for it since I called him out on it quickly
Darn...hate confrontation so was hoping it was part of the screen so i can easily tell him to fix. Now he can just tell me it probably wasn't working due to dropping it but I know it was working. Could always fight the charge on my credit card if he's unwilling to do something about it.
As for aftermarket..i can tell him what you told me but he could jsut stick to his guns, lie and stay "its OEM" and probably nothing i can do about it.
Thanks for the info!
Using a light...it looks like there's nothing in there where the sensor/LED shoudl be..its like i can see to the back of the case.
EDIT: Opened up...the whole proximity part is missing!! I'm assuming the LED light is part of that since that's not working and its right next to it.
EDIT2: I guess the IR blaster is part of that too...lol
Thing that pisses me off now is that he didn't put in my factory stock part and will replace it with a possibly crappy aftermarket part.
I'm demanding some money back for this nonsense.