CM7 NC stuck on android_ - Nook Color Q&A, Help & Troubleshooting

okay, let me be very clear.
i installed CM7 months ago to the internal memory, NOT SD CARD, and it was working perfectly, with no issues. The nook hasn't been used in about 2 months. It's just been sitting there, not even being charged.
Recently i went and plugged it in to charge, and 2 hours later noticed that it was stuck on ANDROID_
i've tried to boot into recovery with no luck. the last version i had installed was i believe CM7.1 final. it was NOT a RC or Nightly. i only use finals.
so again, no issues, and no it's stuck on android.
any help would be appreciated, because it's not mine, it's actually my parents and they were pissed when they found out.
if need be, i'll wipe it, but i'd much rather not to. I have it setup perfectly for them and i'd much rather not have to redo everything.

For starters if it has been on for months you definitely do not have 7.1 final (stable). That came out in October. Before starting a new I would first boot from a SD with CWR 3.2.0.0 or higher and just wipe Davlik and cache, pull the card and reboot. If that does not work, I would next wipe Davlik, cache and system and reinstall a ROM, leaving data alone. As a last resort i would do it all over again.

guess it was just 7.0 final. As i said it was so long ago i don't remember.
so i'll take the SD Card advice, really hope that will work. i put hours into this to get it setup for my parents.

Related

Did I kill my Hero? FC's and other weird problems.

So for the last 5 days I had some very weird problems with my phone. About 2 weeks ago I started with my first Cronos Rom and it worked great. I flashed 1.5 and 1.5.1 without problems and I used it without an ext partition all the time. But then the problems started. When I wiped my whole phone and tried to reinstall 1.5.1 JIT, the phone didnt boot anymore (stuck on the "Android" bootscreen). I wiped again and again, tried 1.5.1 without JIT, 1.5 etc, but I couldt get the phone to work. Nothing worked, so I created an ext partition and tried again. It worked. My phone started and I was able to use it for about a day without problems though I didnt want apps2sd. But then some other weird things happened. 3 Days ago I bought a bigger SD Card, partitioned it, wiped the whole phone and flashed 1.5.1 JIT. The phone started, but after I installed a few apps, I got an error message (installing xxx failed). I found out that theres an "repair ext" function, and it worked, but after I installed some more apps, the problem was back. The second problem was, that after rebooting the phone, more and more apps wouldnt start anymore (FC). The last problem that occured was an FC of the market app. After that, I wiped everything again, tried to flash 1.5.1 JIT, but it happened exactly the same like on the first time. Problems installing apps, FCs, stuck on boot etc.
I am totally down at the moment because I killed my whole weekend trying to get my phone working again. Could anyone please help my with this? I just dont understand what I did wrong. Shouldnt a complete wipe fix almost every problem? And I dont understand why I suddenly cant use my phone without an ext partition. Any Cronos version I try freezes on bootscreen without an ext patition. Is there any way to get my hero working again? Please please help me.
(PS: I also posted this on the Cronos Board.)
I would take out the sd card, wipe system and dalvik cache, and install some custom rom.
well, to make sure it is NOT your phone, did you try another ROM? Eliminate possible problems?
At least try something that is known and stable, like a stock rom, the Taiwain-rooted-repacks (not a rom based on it, but just the taiwan rom rooted) or good ol' MoDaCo 3.2 (based on 1.5 stock).
Til now I just tried the last 2 or 3 Cronos Roms, and as I said, they didnt work, but when I get home from work I'll try the Modaco Rom I used before.
I dont understand what this has to do with the Rom I use. I always wiped the whole phone, dalvik, etc. so shouldnt it just work like the first time I flashed it? No matter what Rom I use?
Another weird thing (could have something to do with this): After I wiped everything and flashed Cronos 1.5.1 JIT, the market still knew what apps I had installed last time. It showed my bought apps AND the apps I was able to install before the latest crash. So does this mean the phone wasnt wiped completely?
The market tracks your purchases and (free) downloads through your google account. So that's normal that the download-list is full.
But it might very well be that you didn't wipe correctly, although I'm curious how you manage to accomplish that. What is your current recovery?
The whole point about trying another ROM is elimination. It doesn't need to make sense, but you need to check things of the list.
There is something weird going on, so trying to solve it logically will only get you so far . Keep trying to narrow down the list of causes. Might well be a bug with Cronos 1.5, or the overclock not working these days because your phone is just a bit hotter than before, who knows.. Like I said: eliminate causes!
I'm using the newest AmonRa recovery to wipe the phone.
Theres one thing I forgot: Yesterday I flashed 1.5.1 without JIT, and then 1.5.1 JIT right after it (just rebooted a few times between). The phone worked great until my SD card crashed. In the taskbar it always showed me "checking for errors"(something like that, my phone's in german ), but in my PC and in the recovery the card worked like always, so I had to wipe the card and start again from the beginning.
Try another ROM , and if that doesn't work, try without SD card.
tombond said:
I'm using the newest AmonRa recovery to wipe the phone.
Theres one thing I forgot: Yesterday I flashed 1.5.1 without JIT, and then 1.5.1 JIT right after it (just rebooted a few times between). The phone worked great until my SD card crashed. In the taskbar it always showed me "checking for errors"(something like that, my phone's in german ), but in my PC and in the recovery the card worked like always, so I had to wipe the card and start again from the beginning.
Click to expand...
Click to collapse
Maybe sdcard faulty? What are the logs you get when booting up the phone?
Soooo, I wiped everything again and flashed Modaco 2.8 without an ext partition. It booted correctly, so I wiped the dalvik cache and flashed Cronos 1.5.1 JIT. It also booted (wow, first time it booted without ext since all the problems started to occur) but I instantly got FC's (phone app for example). Now I wiped completely again and flashed 1.5.1 JIT. I hope it boots, as I still dont have an ext partition. As soon as I know something new, I'm gonna tell you.
So now it seems like its working again. I was able to install all the apps I need without a single error and now I'm restoring my settings and contacts. Suddenly it even works without ext again.
I guess there was something very big f*ked up that I couldnt repair by simple wiping the phone. Very weird that just flashing Modaco got it running again. Now I have back my working phone with ultrafast Cronos Rom and without App2SD, perfect. At least till now I hope it keeps working.
Thanks for your help guys, I think I would have smashed the phone to the wall sooner or later. I never thought about flashing Modaco so I'm happy there are people like you.
Thanks again, and thanks to Feeyo for his unbelievable Rom.
PS: Can I uninstall, Facebook and Footprints without destroying everything again?
Yes, just delete both apps using ADB or use a root explorer, search both apps in System/app and delete them.
Or you could use the MoDaCo online kitchen for removing those apps.

[Q] Team EOS Help needed with latest nightlies

Hi Guys,
I am not sure if I am posting in the right place, but I could use some assistance on the Team EOS nightlies. They won't let me post in the DEV section yet, becuase I am mostly reader, not a poster. Anyway....
I've been running the EOS roms for a while, but I can't seem to run any nightly past 74. 74 runs great, when I tried to update to 75 (rom/gapps/wipe cache) it won't get past the "DUAL CORE" logo. I thought I bricked my xoom, but I am able to boot to recovery, reflash 74 (gapps/wipe) and it boot with no issue. I did a full wipe, and tried again with 76 but no joy (77 wasn't out at the time). I thought it was a problem with n75 and n76. I flashed back to n14 and it works fine, and I can upgrade back to n74. Tonight I tried to update again to n77, but still no dice. I let it sit for 15 minutes at the "Dual Core" logo, and all I noticed is that is got warm, but still no boot.
Any thoughts? All advise is welcome!
BTW, this is for a Stingray 4g xoom
And while I have your attention, I love the work you guys do, and this community, it really makes Android something special!
Weird. Try going into fastboot and do a full wipe of userdata, cache, and system. Then install. If need be, do a backup. This will totally wipe your device.
Wipe cache, wipe dalvik, flash ROM, flash GAPPS, fix permissions. Do it in that order and you should be fine.
Also make sure your using the latest GAPPS. It should be dated 2012-03-17.
Good Luck.
Still not working right, very frustrated, but I have new information
dellenrules said:
Wipe cache, wipe dalvik, flash ROM, flash GAPPS, fix permissions. Do it in that order and you should be fine.
Also make sure your using the latest GAPPS. It should be dated 2012-03-17.
Good Luck.
Click to expand...
Click to collapse
bigrushdog said:
Weird. Try going into fastboot and do a full wipe of userdata, cache, and system. Then install. If need be, do a backup. This will totally wipe your device.
Click to expand...
Click to collapse
Thanks to both of you. I did try this. What I have discovered so far is that some of the flashing fun I have been doing with my may have caused so minor issues with my external SD Card. I backed up the internal to it, and pulled it. I went through the process of nuking the xoom entirely. I.E. Wiped Cache, dalvik, full wipe, factory reset, reset permission, and deleted everything off the internal SD (wasn't in this order, but it all got done) I was able to flash N77, without GAPPS fine. It seemed to run faster with nothing else installed. Rebooted a few times, no problem. I was stoked. I flashed gapps, 03-17 version (the latest). factory reset again so that it was fresh and wiped the cache (just in case). It booted again no problems, ran me through initial config, and then began downloading my apps back. It seemed to run much faster than it ever did before.
Then I rebooted it, without doing any titanium backup restores, just fresh tablet, N77 with my 90 or so apps freshly installed from the market, and it froze again at the "Dual Core" boot screen. I waited hoping for some delayed joy, but none came.
So I went back through the process once again, factory reset, N77 install, wipe cache, install GAPPs. Booted.....initial config, auto downloaded 90 apps from market, reboot......dead.
So then I just flashed N74 again, wiped cache, install GAPPS, initial config, app download.....reboot.......works fine.
<general frustration directed at tablet, not anyone here/>
What gives???? I can't tell what the difference in internal apps in the ROM are that could be conflicting with the ones installed from the market.
Why the hell is N74 working and N77 not, when the apps in both ROMs look the same?
Why does N77 work great when the apps aren't restored?????
Why don't I make a million dollars?????
Why aren't I emperor of the universe???????????????
</general frustration directed at tablet, not anyone here>
Thanks much for all your help!
alright.... i have 2 suggestions these may not work and the second one is a pain in the butt to do but it got me out of a jam way back when i lost my softkeys no matter what i flashed
firstly.. in the sequence of your flashing throw in the 'format /system' see if that has any effect it is 'possible' the system is not being flashed correctly or it could be possible that it is getting corrupted and causing the bootloops (i always format system when full wiping)
second... and this is a pain.. but you can always try flashing back to STOCK... there could be other factors that aren't being flashed or fixed correctly causing ya problems... you can then go through the process and flash directly to the latest build... as i noted earlier this fixed a problem that nothing else could for me and has helped others but really this is a last last resort as it takes alot of time and screwing around
lastly... i have no idea sorry these are all i can input.. if possible can always try and use logcat while booting to see what is causing the crash if im not mistaken and upload a log and one of the devs may be able to have a look at it...
I Would stop dinking around with n77 and go to n90 I had the same issues around those nightly numbers, so I went all the way back to stock... (honeycomb) didn't fix it but I redid the whole install on a higher number and it seems to work itself out..... long story short try another maybe the 1.0 stable by them.
fkntwizted said:
I Would stop dinking around with n77 and go to n90 I had the same issues around those nightly numbers, so I went all the way back to stock... (honeycomb) didn't fix it but I redid the whole install on a higher number and it seems to work itself out..... long story short try another maybe the 1.0 stable by them.
Click to expand...
Click to collapse
He has the STINGRAY not the WINGRAY Xoom.
N77 is the latest for the 4G version. The version he has.
Read the OP
EOS Nightlies hate my xoom, my Xoom wanted CM9 I guess
joshndroid said:
alright.... i have 2 suggestions these may not work and the second one is a pain in the butt to do but it got me out of a jam way back when i lost my softkeys no matter what i flashed
firstly.. in the sequence of your flashing throw in the 'format /system' see if that has any effect it is 'possible' the system is not being flashed correctly or it could be possible that it is getting corrupted and causing the bootloops (i always format system when full wiping)
second... and this is a pain.. but you can always try flashing back to STOCK... there could be other factors that aren't being flashed or fixed correctly causing ya problems... you can then go through the process and flash directly to the latest build... as i noted earlier this fixed a problem that nothing else could for me and has helped others but really this is a last last resort as it takes alot of time and screwing around
lastly... i have no idea sorry these are all i can input.. if possible can always try and use logcat while booting to see what is causing the crash if im not mistaken and upload a log and one of the devs may be able to have a look at it...
Click to expand...
Click to collapse
Thanks much for this. I had already attempted the formatting of everything except the SD card before.....but for sh*ts and giggles I tried it one more time. unfortunately that didn't work.
Using the second option, of reverting stock, I went through sleeplessnija's tutorial on reverting. It really didn't seem that bad, taking me longer to setup my work machine than it did to send the fastboot commands. I was able to get it to boot stock (of course I didn't re-lock it) just fine, and it was quick....so it seems like my hardware is fine.
I used fastboot to put the replacement tiamat recovery, and formatted everything in the mounts menu again. I also mounted my SD card as USB storage and used the full format for it under windows. Then i copied N77 and GAPPS back to it, and re-installed them. It got to the second boot logo (first was the shaking team eos, the second is the square thing with rounded corners that moves). It hung for about 10 minutes, and I shut it off. annoyed.
So I went back into recovery, mounted my SD for USB access from my desktop, and copied the unofficial (which I think is now official) CM9 distro from Team Rogue (Steady's Rom I believe?). I formatted everything, and wiped everything (except the SD) again, and installed CM9 and gapps. Booted fine. Configured account, downloaded 90 apps, rebooted, no problems. Played with it for a while, rebooted....no problems.
I like that my xoom is back up and running......however it seemed that Steadies rom is just a little less fully featured than Team EOS. THAT IS NOT A KNOCK AGAINST TEAM ROGUE OR CM9.....my Xoom is working again (so far) thanks to him (them), and I run CM9 on my AT&T GSII. I just really like Team EOS on my Xoom, and have been with them since the beginning. I would love to know why my xoom suddenly hates the latest nightlies (everything since 74).
Edit: I forgot to ask, Joshndroid.....you mentioned running logcat to see what going on. If it can't boot past the dual core logo or the second boot logo from Team EOS....how do I get the logs? I am not familiar with android's logging.....even though I am a flash-a-holic. I am just thinking that if this is happening to me, maybe I can help out the devs (and myself, and maybe someone else) with the log output.
Edit 2: And Josh.....I forgot to tell you .....good call on the revert to stock answer. I didn't think about that before and thought I was screwed!
Thanks!!

Need help with CWM boot issue

Hey guys. I'm trying to figure out what's going wrong with my Transformer. I'm not experienced with Android development/ROM's so please bare with me.
Rooted my first Android device about a month ago. Made a stupid mistake placing the ROM I was planning to use on the external SD card & didn't backup the install I wiped. Recovered with an official Asus ROM & after about two hours fiddling around I managed to root & load my first ROM (Revolver, whoot!). Very pleased with myself!
Have been using the Revolver ROM for a month without any problems. No deep sleep etc, everything worked perfectly. Using the latest version of Clockworkmod, also no issues so far. Strange thing is that since last monday everytime I (re)boot the device it loads CWM instead of the Android OS. I can get back into Android bij holding volume down during boot & choose to cold boot. Not a big issue but very annoying & can't seem to find the fix.
Searched Google & XDA for a solution. Updated Revolver to 1.3.1 beta, also found the repack by Koush for CWM. Tried fixing permissions, clearing cache, clearing dalvik, wiping & starting over, etc. Everything I tried so far does not fix the CWM-loop I seem to be stuck in.
Would really appreciate some help, I'm probably looking in the wrong direction here. Thanks in advance.
Found something
Finally got out of the CWM loop, found a solution here: http://forum.xda-developers.com/showthread.php?t=1622814&page=2
Strange thing is that after I flashed it with the fix CWM changed to the touch mod I recently installed but never seemed to work. If I understand correctly the fix only deleted the first few lines in the config where the boot in recovery flag should be.
Afterwards I factory wiped the unit & flashed it with a clean ROM. Currently re-installing my apps. I do not have a good feeling on this, tablet seems sluggish last couple of days & I can hear a soft click when the unit reboots. Same sort of click a laptop hdd would make.
Think it's dying on me...

Running MIUIAndroid 2.4.20 with hiccups

Lemme just say hi, and thanks for taking the time to read.
I've been using Royal Ginger for the better part of a year until recently. I saw the MIUI rom and thought I'd give it a shot. Went through the norm, did a nandroid backup then I wiped the data, wiped the cache, and wiped the dalvik cache. Flashed the new rom successfully, didn't have any problems there.
It's run smooth for about 20 hours or so, but suddenly my device has begun rebooting itself. This last time it shut itself off and wouldn't even recognize that I had it plugged in to charge. After sitting for about 10 minutes it started booting itself up. As of now it's working correctly.
Just curious if anyone may have any insight as to why this has happened, or if anyone else is using this particular rom. (http://forum.xda-developers.com/showthread.php?t=1578036)
Thanks in advance for any help you may be able to throw my way!

Can't mount sdcard/data/system in CWM. Solved.

Hello,
Firstly I want to apologies for creating new thread for a thing on which there already number of threads here. However when I was in this big trouble (at least it was for me) on Saturday evening I searched everything and couldn't find a working solution.
And I would like to request moderator or someone who has better knowledge of what did happen and how it got fixed can make it guide with his thoughts if there is a need to .
Let's start with my story. I unlocked bootloader first time and flashed CWM. While restarting I tried to wiped data as told in one of the tutorial and then I restarted. As long as I remember it said you would not be able to boot in CWM again and I said Yes. That's the time when it got stuck to X logo. I flashed CWM again and then tried to restart still nothing happened. I got further and flashed CM 10.1.2.
Then it got stuck to CM logo. I wiped cache, data, dalvik cache before and after; nothing helped. Then I managed to Power off phone and planned to go for sleep. I thought I have ruined my phone
This is how I fixed it:
At the last moment I thought to give it a last try before sleeping. I could not have went to sleep with that I thought Then I rebooted my Nexus 4 in CWM and went to 'Mount and Storage'. Mounted everything which were in unmount state. Formatted data. Went back a step then wiped data. And restarted. And there it got rebooted in CM 10.1.2 :highfive:

Categories

Resources