Related
I'm looking to upgrade my phone to a custom ROM, but I'm not sure which one is the best for my needs. This is what I am looking for:
Fyro Update
Increased Phone Speed
Increased Battery Support
Adblock for browser and apps
Also, how do I flash my ROM? I have the drivers to connect my phone to my computer, and that's about as far as I got. Secondly, will I lose my apps and their data? I already have my contacts and SMS backed up.
Thanks guys
jt
As a shameless plug - I whole-heartedly recommend SyndicateROM. It'll fulfill three of your four features already (including ad blocking in apps and the browser), and when the OFFICIAL, FINAL (ACS prides itself on stability and feature-completeness) Froyo release is out, it will be updated right away!
That's actually the one I was looking at. Is there instructions on how to flash your ROM? Will I lose my apps and their data?
After rooting you'll need Clockwork Recovery mod(CWM). Look for a Dev who has created a root with a CWM install (http://forum.xda-developers.com/showthread.php?t=770388).
1. Follow steps to root and install CWM.
2. Download a ROM and put it on your SDcard (Start with ones that have been around for a while and have been tested quite a bit. Avoid Froyo ones till you feel comfortable with CWM and Odin {if you ever use it}).
3. Reboot into CWM, BACKUP everything (this is key for your data to come back), wipe x3 (including cache)
4. Install ROM from SDcard(reboot, may take a few minutes to load for the first time)
5. Reboot into CWM, and advance restore (DATA only). reboot
6. Enjoy with all your data.
Hope this helps
Epic Experience + Phoenix is the best battery life I've had on any ROM.
Performance feels like stock, which is to say, this phone is really fast just as is and I don't think its screaming for better performance out of the box. Its not like it feels sluggish like the Evo does.
All these devs do great work! You can't go wrong with any of these roms. This belongs in the General Discussions section!
Sent from my SPH-D700 using XDA App
Streamline8 said:
After rooting you'll need Clockwork Recovery mod(CWM). Look for a Dev who has created a root with a CWM install (http://forum.xda-developers.com/showthread.php?t=770388).
1. Follow steps to root and install CWM.
2. Download a ROM and put it on your SDcard (Start with ones that have been around for a while and have been tested quite a bit. Avoid Froyo ones till you feel comfortable with CWM and Odin {if you ever use it}).
3. Reboot into CWM, BACKUP everything (this is key for your data to come back), wipe x3 (including cache)
4. Install ROM from SDcard(reboot, may take a few minutes to load for the first time)
5. Reboot into CWM, and advance restore (DATA only). reboot
6. Enjoy with all your data.
Hope this helps
Click to expand...
Click to collapse
Hoping you can help me a little further;
1) Done successfully
2) Done
3) How do I boot into CWM? I installed Titanium back up, and ROM manager - not sure if that's needed or not
Thanks guys
PS, sorry for posting in the wrong section
tuttjs said:
Hoping you can help me a little further;
1) Done successfully
2) Done
3) How do I boot into CWM? I installed Titanium back up, and ROM manager - not sure if that's needed or not
Thanks guys
PS, sorry for posting in the wrong section
Click to expand...
Click to collapse
camera button, down volume and power on.
I suggest you try them all and figure out what you like or don't like. Also try out the ODIN program so when you accidentally bork your phone you will know how to fix it right away.
Got it. I assume this is backing up to my SD card. Do I not wipe my SD card?
Thanks, this should be the last question!
tuttjs said:
Got it. I assume this is backing up to my SD card. Do I not wipe my SD card?
Click to expand...
Click to collapse
The only way you will wipe your SD card is if you partition it for A2SD support. The factory reset wipes all your data and might be a good idea if you are going from one rom/kernel to another. CWM backs up to your SD card. I have about 6 backups and can restore several different roms if I want. If you try all the roms out and make backups of all them it will be easy to go back to what you want.
A program called ROM Manager will make it easy to rename your backups.
I've had such great help in these forums (Nook specifically) I couldn't resist trying my luck in these (Droid X) forums as well.
So, I've searched for Clockworkmod threads but they are all (That I found or noticed) from back in August.
Plenty of info to be had on Titanium Backup.
So my question, is Titanium the backup/restore program of choice? I was hoping for an idiots guide to backup and restore (especially in the event of problems) but the guides are kind of sketchy on the restore part.
Titanium
Use titanium backup to backup and restore all your apps. Useful when trying out new roms, although without the paid version of titanium you will spend alot of time tapping through the installation screens as it goes through your apps. Titanium won't help you recover a broken system.
SBF
Use RSDLITE 4.9 with a .SBF file to perform what many call a "sbf". This is usually used to restore a phone back to stock, or to recover from a bad/corrupted operating system. If your phone is unbootable, this is your recovery option. SBF'ing your phone is not as scary as it sounds, just download the system restore file (.sbf), connect your phone via usb to your computer, and use RSDLITE 4.9 to flash the phone.
Nand backups / Clockwork recovery
Use clockworkmod to do a full backup of your phone. Think of it as a clone of your phone. Restore your phone by booting into clockwork recovery and instead of choosing "backup", use the "restore" command. It will then allow you to select one of the backups you have made with clockwork. Pretty easy stuff here.
jeftep said:
Nand backups / Clockwork recovery
Use clockworkmod to do a full backup of your phone. Think of it as a clone of your phone. Restore your phone by booting into clockwork recovery and instead of choosing "backup", use the "restore" command. It will then allow you to select one of the backups you have made with clockwork. Pretty easy stuff here.
Click to expand...
Click to collapse
Thank you, this is exactly what I was after. My only problem remains that I do not see any guides on how to go about downloading/installing/operating this program. I'll keep searching now that I know more about what I'm searching for. Thanks!
Search the market for "rom manager", it's free. Load it and tap "flash clockworkmod recovery".
You can use this app to reboot into recovery or by holding down the home and volume down buttons while pushing the power on button.
You can also download the DX bootstrapper from koushik's site, just google "koush bootstrap". Also free.
Sent from my DROIDX using XDA App
Woah there buddy.
I'm going to clarify this process a bit for you before you mess something up, if you don't mind.
Root your phone.
The simplest method is to search for Z4Root here in the forums...it's a .apk that roots your phone for you.
Now...
I assume you want a sweeeeeeeet rom, ya?
We can do that...
MY personal recommendation would be this...
Make sure you have at least 2-3 gigs free on your SD...it won't need to STAY that way...but during this process, it will.
Open your contacts.
Click the options button.
Backup your contacts to your SD card.
Now download Titanium from the market...
The free version works fine for 99% of what you need.
The only problem is (as mentioned) you have to manually click the "install" button for all 500098098098 of your apps when you restore...as opposed to just one button and letting it work for a few minutes.
Open Titanium and backup all of your apps+data.
Do you want Liberty 2.0? I personally use it and LOOOOOOVE it...but you currently have to pay $5.99 for it...a free version should be released soon.
If you do...just download liberty toolbox donate from the market.
It will install the rom for you! The option is under the "Rom Manager" part...
Make sure you select both options when installing....The "Backup" and "clear data" ones.
If you don't want liberty...read below...if you've chosen to pay the $5.99...skip down to the ****** below.
Download either DX bootstrap or Rom Manager.
Rom manager actually installs Clockwork...where bootstrap is simply a method of booting into clockwork via an application.
Either work fine.
Find the ROM you'd like to install and download the .zip
Put the zip on the root of your SD card.
Boot into clockwork.
(With DX bootstrap you click "bootstrap" and when it finishes click "reboot recovery")
Backup. (Camera button selects options, volume moves up and down, and power moves back a page)
Now Wipe Data/Factory Reset
Now...Wipe Data/Factory Reset
And again.
And again.
I usually do that 3-4 times just for extra security.
Now install zip from SD card.
Pick the "Choose Zip from SD card" option.
Find your rom's .zip
Click Reboot.
******
CONGRATULATIONS!
You're running a custom ROM!
Now...if you're contacts don't automatically start restoring...
You can choose the backup that you made from the options menu in your contacts.
Now...restore all apps+data with Titanium.
And you're back to where you were before the rom.
All your contacts...all your apps...
You may need to go back into your settings menu and change those back to your exact specifications.
Now...
If you don't like your rom...
You can boot into recovery again...
And restore to where you were previously with one click.
At this point after deciding I like the rom (I don't keep much free space on my SD)
I usually move my nandroid backup from before the rom to my computer...and delete it from my SD card...and then do another backup of my current (rom'd) setup.
I keep a copy of the titanium backup on my PC as well...and delete it from my SD card...there is no reason to waste a gig of space that can easily be transferred back when needed.
My recommendation is to always have you're most recent nandroid backup on your SD card and a copy of your last few on your computer.
You can rename the backup folders for organization...but don't use any spaces or special characters.
If you're REALLY hurting for space...
You can delete the nandroid backup safely if you have a microSD reader on your computer...in the case that your phone doesn't work and need to transfer the backup back onto your SD card.
Happy modding!
Thanks for the info, all of which answered my question just right. I've been using Gingerbread rooted & deoxed since Friday and it is quite nice. The improved battery life is phenomenal!
I want to STRONGLY recommend that everyone who is new/does not know what they are doing actually go through the process of flashing the rom. I was inexperienced once and I hard bricked it (unfixable). No one needs to go through that and anyway that's what keeps our bootloaders locked.
INCREDIBLY IMPORTANT STEPS
If you do not wipe data/cache/dalvik cache/battery stats, you will bootloop. Repeatedly wiping is not at all necessary but its good for ocd.
If you do not mount system and data, your phone WILL NOT BOOT and you will have to sbf.
SBF'ing is not difficult but a pain in the ass. First of all you do not need version 4.9. I used 4.7 three days ago to flash the most recent system version. Make sure that you have the file for your bootloader version or again your phone WILL NOT BOOT.
That being said, I have found that all problems are almost always careless mistakes or at least mine have been
You will find that as long as you're careful and follow all instructions, you'll never have any problems
Ok. Great info. I have been reading through the stickies n then came across this.
I am currently running darkslide 4.2 with blur. Flashed using clockwork mod on DX rooted with z4. I know that's alot of acronyms but yall understand. I used the bootstrap to get to clockwork and load everything using astro file manager.
Here is the question.
Do I have to wipe my cache in clockwork or can I leave it? So far I have left it n its running fine but doesn't seem any faster and my battery runs down in about a day.
I also use Titanium to back up my stuff but do I ha e to back up everything manually or is the free version one touch good enough? I noticed there are alot of things not backed up in to do list. I will happily get the donate version if its recommended.
Thank you all for your time and effort to answer our beginner questions.
Sent from my DROIDX using XDA App
Glad to see you are making progress, jperro. It never hurts (in my experience) to wipe the cache.
The paid version of Titanium backup lets you perform batch operations without interacting with every single install screen. There are other features that make it good, but thats the main one that saves you time/frustration.
I only back up a few system apps/data like Contacts Storage and Wifi Hotspots Storage. If I'm restoring my phone, chances are I'm either trying a new rom and I don't really want to muck it up with any old data - so I don't back up all the system apps/data that Titanium Backup shows as "not backed up". Besides, I've got nand backups in case I'm flashing back to a previous setup, so restoring system data or apps via Titanium seems redundant.
Ahhh. Ok. Thanks jeftep for the info. Very useful and informative.
Sent from my DROIDX using XDA App
A guy I know asked if I could let him know how to Root and Flash ROM's, so I did him a guide. It turned out to be a pretty comprehensive guide and I guessed others might find this useful too?
DISCLAIMER!!!!! This WILL void your warranty, so take that on-board, although you can de-root the phones and put them back to their shipped state theoretically. If your phone ends up a pretty brick, and Samsung aren't interested, that ISN'T my fault. THIS IS ENTIRELY AT YOUR OWN RISK! THIS GUIDE SHOULD BE ACCURATE, I HAVE READ IT OVER AND OVER, BUT READ THE COMMENTS BELOW TO CHECK FIRST. IT'S YOUR PHONE!!!!
First Some Handy App's:
ROM Manager has Custom ROM's that are popular and it can advise when new versions become available. It's a more automated way of flashing ROMs and good for new flashers! : https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en
Nova Launcher is an improved version of the Stock Jellybean launcher and allows you to backup your home screens, therefore you don't have to start from scratch everytime you flash a new ROM: https://play.google.com/store/apps/details?id=com.teslacoilsw.launcher&hl=en
Titanium Backup is a pretty (not entirely) essential app that backs up all your apps, and the data associated with them, i.e passwords, game save files, username. Basically the app will be frozen as it is when you leave it. https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en
ES File Explorer is a File Manager which also has the options in settings to allow it root access to the system files on your phone. This is handy as you will no doubt understand the more you use it. It can also display the MD5 of a ZIP file that you download. https://play.google.com/store/apps/details?id=com.estrongs.android.pop&hl=en
https://play.google.com/store/apps/details?id=com.riteshsahu.SMSBackupRestore&hl=en This will backup your text and picture messages to your SD Card. Handy!
https://play.google.com/store/apps/details?id=com.riteshsahu.CallLogBackupRestore&hl=en This will backup your Call Logs....if you are bothered.
Now down to the Nuts and Bolts! Let's Get Rooting and Flashing!
1) Root and Recovery Install:
You root your device following the instructions in this http://forum.xda-developers.com/showthread.php?t=1703488 post. This gives you Superuser access to your phone and allows you to change the boot options of your phone. This will install Clockworkmod Recovery. Clockworkmod Recovery replaces the in-built recovery that the OEM installs and allows you more flexibility to alter your phone. If you struggle to get into Recovery, then there is a key-press combination that does it when you switch on your phone and there is also an app in the Play Market called "Reboot to Recovery" that will allow you to do it, but you need to understand how to get into Recovery from a cold start just in case you have issues. Most custom ROM's will have it on the shutdown menu of the phone anyway, and once you install a custom ROM and install ROM Manager, then you can access it there anyway. It sounds a bit daunting, but its really simple once you understand how Clockworkmod, or any other custom Recovery works. READ CHAINFIRE'S THREAD PROPERLY BEFORE YOU START - THEN READ IT AGAIN!
2) Titanium Backup & Nandroid:
You will hear people refer to Titanium Back-up's and Nandroids. This is basically a full back-up of your ROM. A Nandroid backs up the exact state of your ROM so you can restore it back if you ever have problems or just don't like the ROM you have flashed. The first thing you have to do when you have rooted your phone is do a Nandroid. In Clockworkmod you will see in the menu's "Backup and Restore". Back it up, this will place it either on your internal SD or the external Micro SD Card (you can choose, it's faster on your internal SD but the file will be large. Over 1GB+ isn't unusual as this will back up all your apps and everything associated with them.) Nandroid, nandroid, nandroid. Do it all the time. You can always delete them in Clockoworkmod or through a file manager - if you don't need them later. Nandroid, DO A NANDROID! Then, reboot into your stock ROM and DO A TITANIUM BACKUP! You can also backup your SMS and Call Logs, too. Don't get over excited and forget. DO A NANDROID and DO A TITANIUM BACKUP! You get the picture!?
3) Custom ROM files and other flashable files:
ROM's, RIL's and Radio's are generally mostly .ZIP files (Google them all and work out what they do! - YES DO THIS - IT IS ESSENTIAL) and are flashed in Clockworkmod Recovery by using the menu item "Install Zip from..." Don't try to uncompress them yourself or it won't work and most files come with a MD5 checksum code. This will verify the .ZIP file is perfect and not corrupted. ALWAYS check your MD5 before you flash. ROM Manager will do this automatically, but if you download a ROM from XDA the author will usually supply the MD5. If you download the ROM ZIP to your phone, ES File Explorer has a function to display the MD5. USE IT!
4) ROM Manager and Titanium Backup:
The two best apps for Android (in my opinion anyway), and you do NEED to buy them really, not essential, but they make your life much easier. ROM Manager has the most popular ROM's and will notify you about updates. The most popular and probably the best custom (or usually the most stable) ROMs are by Cyanogenmod (Google it) and CM9 is their Google Android AOSP (Android Open Source Project - Again Google it and understand it) based on Ice Cream Sandwich and CM10 is still in development, but is their new ROM based on Jellybean. Keep your titanium back ups up to date BEFORE you flash a new ROM then you can put the apps back on in the exact state you left them on the old ROM.
5) Kernels, Radios and RILs (Radio Interface Layer) and Firmware:
These can be flashed in Clockworkmod generally, are sometimes essential, and can improve the performance of you device, but be careful, flashing these can brick your device if it goes wrong or the download is corrupt in some way. Check the MD5 religiously and make sure your battery is full so your phone doesn't switch off mid way through. Kernels are usually OK, but firmware still scares me now. ALWAYS check that what ever you are flashing is for the INTERNATIONAL or UK SGS3 if that is the phone you are using. Do NOT flash another version, their hardware is different and it will brick your phone.....not sure....ask on XDA Developers, nobody will flame you for checking!
6) Gapps:
With most ROM's, you will need to flash the GAPPS.ZIP package to have it automatically restore your photos, contacts and wireless details. So don't forget to do this whenever you flash most custom ROMs. The Gapps ZIP contains important apps like the Google Maps, Play Store, Calendar, Contacts, Camera, Gallery (where you find the Picasa Pics from your PC), and will log your phone into Google, so it's pretty essential.
7) Some other tips.
A) Titanium! (I KNOW, BUT YOU WILL KICK YOURSELF IF YOU DON'T)
B) Nandroid! (I KNOW, BUT YOU WILL KICK YOURSELF IF YOU DON'T)
C) READ THE THREAD AND THE OP BEFORE YOU DOWNLOAD A ROM AND FLASH IT.
D) READ ABOUT THE BUGS IN THE ROM AND DECIDE IF YOU WANT IT.
E) DON'T ASK DEV'S FOR ETA'S - YOU WILL BE GROWLED AT. THEY DO ALL THIS FOR FREE!
F) PLEASE, PLEASE, PLEASE, PLEASE DON'T MOAN AT ME IF THIS BRICKS YOUR PHONE. THIS IS A GUIDE, IF ANYTHING IS INACCURATE THEN NO DOUBT SOMEONE WILL COMMENT BELOW, SO THIS IS A GOOD OPPORTUNITY TO REVIEW TIP C! ABOVE!!!!
F) Always wipe your Cache and Dalvik Cache first, when you flash a new ROM.
G) Read the OP - Some phones need a full factory reset before you flash them. READ THE OP!!!!!
Good Luck. :good:
If you have time you should make it more detailed...i get what you say but some may want more info about what they're doing with their phone..
Any by the way!
It's called KERNEL!
Not KERNAL!
KERNAL:http://en.wikipedia.org/wiki/KERNAL
KERNEL:http://en.wikipedia.org/wiki/Kernel_(computing)
Moved to general, make sure you read the section rules for more information on where to place threads!
nfsmw_gr said:
If you have time you should make it more detailed...i get what you say but some may want more info about what they're doing with their phone..
Any by the way!
It's called KERNEL!
Not KERNAL!
KERNAL:http://en.wikipedia.org/wiki/KERNAL
KERNEL:http://en.wikipedia.org/wiki/Kernel_(computing)
Click to expand...
Click to collapse
Ha Ha, I'll correct it. I always get them mixed up.
If one of the mods make it a sticky then I'll spend a lot of time making it more detailed, but if it's just going to get lost in the ether, then there's probably little point. I would personally have killed for a guide like this 4 years ago when I started rooting and flashing, but I agree, it could be even more comprehensive and I certainly don't mind putting in the leg-work if it's helping people?
Sent from my GT-I9300 using Tapatalk 2
Comment .
One Rom Manager is known to give problems with some root if you read Chainfires thread .
http://forum.xda-developers.com/showthread.php?t=1695238
Nandroid does not backup everything No Modem No EFS
With most ROM's, you will need to flash the GAPPS.ZIP >>> Not true for stock based roms .
jje
JJEgan said:
Comment .
One Rom Manager is known to give problems with some root if you read Chainfires thread .
http://forum.xda-developers.com/showthread.php?t=1695238
Nandroid does not backup everything No Modem No EFS
With most ROM's, you will need to flash the GAPPS.ZIP >>> Not true for stock based roms .
jje
Click to expand...
Click to collapse
Thanks, I'll let some of these corrections mount up then do a big edit.
You are of course correct, stock ROMs and ones like MIUI don't need Gapps.
Didn't realise ROM Manager was an issue after the recent stability fixes recently, but I'll amend that.
Sent from my GT-I9300 using Tapatalk 2
ManCityFC said:
Thanks, I'll let some of these corrections mount up then do a big edit.
You are of course correct, stock ROMs and ones like MIUI don't need Gapps.
Didn't realise ROM Manager was an issue after the recent stability fixes recently, but I'll amend that.
And yes, good point about Nandroids.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Sent from my GT-I9300 using Tapatalk 2
ManCityFC said:
Didn't realise ROM Manager was an issue after the recent stability fixes recently, but I'll amend that.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Could be out of date with my comments . Its just long time SGS and Rom Manager problem posts .
jje
Can anyone else think of things that I could add to this guide?
I'm thinking of updating it with:
Terms that people ask about, (like the dreaded SOD)
Creating a section that explains about helping devs with positive feedback and how to generate a logcat.
General troubleshooting like clearing an app cache.
Need some inspiration though, what questions do we get asked over and over?
Sent from my GT-I9300 using Tapatalk 2
Just got a GTab 2 7.0 a few days ago. A P3113, so only 8GB of storage, about half of which is the ROM and crap apps. I've rooted before (had a KF 1st gen when it came out), and just wondering about a few things with the GTab:
Right now, I don't mind the stock ROM so much. There are problem things that would be "nice to have", but right now, would like to generally stay as "stock" as possible. That being said, I'd still like to "de-crap" the ROM to free up some storage space, and I assume that might lead to it running a bit better, since so much seems to just pop-in while running other apps. So:
I know I need to root first, so my first question - how reliable is that? I'm on a Mac, but have access to a netbook running Win7, so could run Odin to "get things done". I'd hate to brick the thing, still having 51 weeks of warranty left. (I also understand that I might want to install something else to keep the flash count from showing it's been flashed).
Once root'ed, is it better to use one of the "de-crapped" ROMs floating around? And if so, which seems "best" (yeah, I know the moderators hate the "which is best" - I'm looking for stock - and STABLE)
Or, is it better to eliminate the apps myself? (Not sure if this is a wholesale "rm" to remove certain apps from a terminal app, using adb, or if they have some uninstallers embedded somewhere, or...) - so better to use one of the ROMs floating around?
Is the GTab 2 "stable", so even if you trash a ROM, you can still get into the ROM manager to restore a previously working, or stock, ROM?
I'll probably come up with a couple more questions, especially depending on the replies... TIA
Hi..
I can answer some of your questions. I hope that helps!
1- Rooting is easy and reliable. you may use "CF-Auto-Root" tool (search for it in XDA forum).
But you need to remember that rooting and custom ROMs void your warranty.
2- If you just need to free some storage space, you may use an app such as "Clean Master" to uninstall system apps and get rid of temp and junk files.
3- If you opt to use a custom ROM make sure it is very well supported and maintained.
aisais said:
Hi..
I can answer some of your questions. I hope that helps!
1- Rooting is easy and reliable. you may use "CF-Auto-Root" tool (search for it in XDA forum).
But you need to remember that rooting and custom ROMs void your warranty.
2- If you just need to free some storage space, you may use an app such as "Clean Master" to uninstall system apps and get rid of temp and junk files.
3- If you opt to use a custom ROM make sure it is very well supported and maintained.
Click to expand...
Click to collapse
Thanks - but prior to using Clean Master I assume I better either get a stock image to reload, or use CWM so I can make a backup of the ROM before messing something up?
tundrwd said:
Thanks - but prior to using Clean Master I assume I better either get a stock image to reload, or use CWM so I can make a backup of the ROM before messing something up?
Click to expand...
Click to collapse
Taking a backup is always good thing to do. I suggest you try clean master to know how it works and what does it do.
aisais said:
Taking a backup is always good thing to do. I suggest you try clean master to know how it works and what does it do.
Click to expand...
Click to collapse
Thanks - I plan to use Clean Master. Allows me to be selective about what I remove/move, instead of getting a ROM from someone and they removed the ONE THING I really wanted.
Ok, got it rooted and CWM installed.
HOWEVER, when I boot into CWM, I DON'T see an option to backup my ROM (I've used TWRP before on my KF, so the menu is different).
What I've got on my screen in CWM:
Android system recover <3e>
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
That's it. Where's the option to do a ROM backup? Oh, used file P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip Had CWM and Root all in one. I do have GT-P3113_ClockworkMod-Recovery_6.0.1.0.tar as well. Should I just go through procedure again to flash this CWM? Will it still retain SU?
nandroid backup ok to use? Seems it's just a wrapper for a backup script...
Ok - I'll reply to myself.
I don't know what was wrong with the CWM I installed via the aforementioned file (P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip), but I went to the CWM site, D/L'ed the latest touch enabled CWM for the P3113 (6.0.2.3, I believe), and installed it over the existing recovery image on the device (I had to create my own .tar.md5 - easy with *nix).
Anyway, I now have access to the backup options by scrolling down. The image from P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip, simply wouldn't scroll beyond what I listed earlier. Now can scroll down, make backups, etc.
Haven't tried yet to re-install the image I made with nandroid - I'm a bit leery of that - so I'll just get the stock 4.1.1 ROM from sammobile, and keep it around....
tundrwd said:
Ok - I'll reply to myself.
I don't know what was wrong with the CWM I installed via the aforementioned file (P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip), but I went to the CWM site, D/L'ed the latest touch enabled CWM for the P3113 (6.0.2.3, I believe), and installed it over the existing recovery image on the device (I had to create my own .tar.md5 - easy with *nix).
Anyway, I now have access to the backup options by scrolling down. The image from P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip, simply wouldn't scroll beyond what I listed earlier. Now can scroll down, make backups, etc.
Haven't tried yet to re-install the image I made with nandroid - I'm a bit leery of that - so I'll just get the stock 4.1.1 ROM from sammobile, and keep it around....
Click to expand...
Click to collapse
That's exactly what I did today, grabbed the stock image for a backup, rooted with Odin and CWM then flashed a CM based 4.3 ROM. Piece of cake.
My apologies if this has been covered. I've successfully rooted and unlocked the bootloader. I've tried my best to do a lot of reading including going through item by item in the xda wiki glossary but I'm still a little confused/want clarification before I actually do anything with my phone.
My goals are:
1) To create a full .img backup of my current system so I can always go back to it if needed/worst case scenario
2) Create a list of all my installed apps. Backup a few select apps that contain data within them that does not get backed up in the cloud or appear in a copyable source anywhere when i browse the phone directories (an app called Pattrn specifically that stores favorited background images..)
3) wipe/clear the my current incarnation of kitkat and re-install it 'fresh' (possibly without the bloat?), then reload desired apps.
4) create a backup .img of this new instance.
-----------------
I'm generally pretty quick to learn technical content but I've honestly tried to fully grok the steps for the last two weeks and haven't gotten there/understand enough to be confident to do what I think I need to do.
can take this to PM if anyone has some patience to work with me. Gladly donate to any app you make or paypal a few bucks if you can help walk me through this..
My understanding is that I need to get TWRP or CWM installed in order to get a custom recovery (as opposed to a stock recovery process)---which will allow me to do step 3. But even getting TWRP going I'm confused..
Thanks
water- said:
My apologies if this has been covered. I've successfully rooted and unlocked the bootloader. I've tried my best to do a lot of reading including going through item by item in the xda wiki glossary but I'm still a little confused/want clarification before I actually do anything with my phone.
My understanding is that I need to get TWRP or CWM installed in order to get a custom recovery (as opposed to a stock recovery process)---which will allow me to do step 3. But even getting TWRP going I'm confused..
Thanks
Click to expand...
Click to collapse
can't help with everything..but with custom recovery..the easiest way is download flashify from play store and flash recovery image with itfrom here http://androidhosting.org/Devs/Dhacker29/msm8960/ you have a Razr M on kitkat use this one http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP2710-RAZR_M-KITKAT.img
copy it to sdcard or internal storage...open flashify and select recovery image then choose the downloaded file..flash it and restart
water- said:
My apologies if this has been covered. I've successfully rooted and unlocked the bootloader. I've tried my best to do a lot of reading including going through item by item in the xda wiki glossary but I'm still a little confused/want clarification before I actually do anything with my phone.
My goals are:
1) To create a full .img backup of my current system so I can always go back to it if needed/worst case scenario
2) Create a list of all my installed apps. Backup a few select apps that contain data within them that does not get backed up in the cloud or appear in a copyable source anywhere when i browse the phone directories (an app called Pattrn specifically that stores favorited background images..)
3) wipe/clear the my current incarnation of kitkat and re-install it 'fresh' (possibly without the bloat?), then reload desired apps.
4) create a backup .img of this new instance.
-----------------
I'm generally pretty quick to learn technical content but I've honestly tried to fully grok the steps for the last two weeks and haven't gotten there/understand enough to be confident to do what I think I need to do.
can take this to PM if anyone has some patience to work with me. Gladly donate to any app you make or paypal a few bucks if you can help walk me through this..
My understanding is that I need to get TWRP or CWM installed in order to get a custom recovery (as opposed to a stock recovery process)---which will allow me to do step 3. But even getting TWRP going I'm confused..
Thanks
Click to expand...
Click to collapse
Well, with TWRP, there is an option to back up your current system, data, and boot image.
So, let's say you make a backup your stock kitkat rom, you can wipe that, install a compatible rom. And if that fails or you do not like it, you can boot back into TWRP and restore the backup you made with the restore option.
I'm not too sure what you are asking about your apps, but with titanium backup, you can backup any app + their current data. For example, lets say you backup your favorite browser and it has everything just the way you want it, you can back it up with titanium backup, flash your rom, and restore it with titanium backup.
Not sure if that was what you were asking with #2, but if you have another question, ask away. I'm on a road trip so I have plenty of time.
Sent from my DROID RAZR M using XDA Premium 4 mobile app
crazy4android said:
can't help with everything..but with custom recovery..the easiest way is download flashify from play store and flash recovery image with itfrom here [link] you have a Razr M on kitkat use this one.. [link]
copy it to sdcard or internal storage...open flashify and select recovery image then choose the downloaded file..flash it and restart
Click to expand...
Click to collapse
thank you for your fast response, I appreciate it. I can do this--can you just clarify for me to define specifically what 'custom recovery' means?
I might be over-thinking it but I'm still trying to actually understand what custom recovery means-I assume it is in contrast to the current recovery which is still whatever shipped with the phone from verizon/motorola? So the above .img is a kitkat-base recovery (possibly without verizon bloat?)
Thanks
poppers162 said:
Well, with TWRP, there is an option to back up your current system, data, and boot image.
So, let's say you make a backup your stock kitkat rom, you can wipe that, install a compatible rom. And if that fails or you do not like it, you can boot back into TWRP and restore the backup you made with the restore option.
I'm not too sure what you are asking about your apps, but with titanium backup, you can backup any app + their current data. For example, lets say you backup your favorite browser and it has everything just the way you want it, you can back it up with titanium backup, flash your rom, and restore it with titanium backup.
Not sure if that was what you were asking with #2, but if you have another question, ask away. I'm on a road trip so I have plenty of time.
Sent from my DROID RAZR M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you too for your response!
So yes, I would like to use TWRP for that--make a backup of my current stock rom in all aspects, then start with a fresh instance. Does doing the step the above poster linked basically get TWRP installed as a custom recovery---which then gives me the options to create those backups in the bootloader menu? again sorry for my confusion, I've read the guides and how-to but I'm getting tripped up on some of the lingo/definitions.
On #2 Yes, that is basically what I wanted--I've got titanium backup installed and have backed up a few of these programs to my SD card already. Only have a handful of programs that have any customization that I care to retain.
water- said:
thank you for your fast response, I appreciate it. I can do this--can you just clarify for me to define specifically what 'custom recovery' means?
I might be over-thinking it but I'm still trying to actually understand what custom recovery means-I assume it is in contrast to the current recovery which is still whatever shipped with the phone from verizon/motorola? So the above .img is a kitkat-base recovery (possibly without verizon bloat?)
Thanks
Click to expand...
Click to collapse
you can do diff things like poppers162 mentioned you can backup ur entire rom with it...its very easy to flash nd very user friendly to navigate..no the above is a recovery img...you can boot ur phone into it once you flash it..then from there you can backup ur stock rom..and install/flash custom roms with bloat removed..
or another option is just freeze the apps you don't want with titanium backup..its almost as effective as uninstalling
Okay.. I've got TWRP going and creating a backup of my current system onto an external SD card. .. progress.
I've already backed up everything I desired in titanium.
Next up doing a 'clean' start in kitkat--or a slightly improved version. I realize at this point maybe things become more subjective to people's preferences.. I'm not looking to go to CM. I found some stock or a very-nearly-stock version of kitkat I can now 'start' fresh with--the google play edition? or do I need to download "Android 4.4.2 Blur_Version.183.46.10.XT907.Verizon.en.US"? I guess I need some more help at this point. Verizon is my carrier..
Thanks--do appreciate the help! :good:
water- said:
Okay.. I've got TWRP going and creating a backup of my current system onto an external SD card. .. progress.
I've already backed up everything I desired in titanium.
Next up doing a 'clean' start in kitkat--or a slightly improved version. I realize at this point maybe things become more subjective to people's preferences.. I'm not looking to go to CM. I found some stock or a very-nearly-stock version of kitkat I can now 'start' fresh with--the google play edition? or do I need to download "Android 4.4.2 Blur_Version.183.46.10.XT907.Verizon.en.US"? I guess I need some more help at this point. Verizon is my carrier..
Thanks--do appreciate the help! :good:
Click to expand...
Click to collapse
Android 4.4.2 Blur_Version.183.46.10.XT907.Verizon.en.US is complete stock with all the verison bloatware...as for the google play edition..i don't know if theres a flashable rom..the one in the Droid RAZR M Android Development is for fastboot i think..not sure and i myself havent looked into how to fastboot a fxz
water- said:
Okay.. I've got TWRP going and creating a backup of my current system onto an external SD card. .. progress.
I've already backed up everything I desired in titanium.
Next up doing a 'clean' start in kitkat--or a slightly improved version. I realize at this point maybe things become more subjective to people's preferences.. I'm not looking to go to CM. I found some stock or a very-nearly-stock version of kitkat I can now 'start' fresh with--the google play edition? or do I need to download "Android 4.4.2 Blur_Version.183.46.10.XT907.Verizon.en.US"? I guess I need some more help at this point. Verizon is my carrier..
Thanks--do appreciate the help! :good:
Click to expand...
Click to collapse
There's only a handful of roms compatible with the kitkat 3.4 kernel. I, personally, love cm11 test build. It's been going great. I would give it a try. If you don't like it, you have your backup!
Sent from my DROID RAZR M using XDA Premium 4 mobile app
Kitstalk ran pretty smoothly minus the speaker phone issues I like it but I've always been a fan of beanstalk... that was a few days ago when I flashed it so it may be fixed now I haven't checked on it...
Sent from my XT907 using xda app-developers app
success..95% or so
wanted to follow up here.. some of the terms finally clicked in my mind to understand the functions of recovery/fastboot/bootloader/flashing..etc. I wonder if there is a flow-chart type diagram available out there--that type of thing would have really helped to understand--being able to visualize where these different aspects interact and where files etc line up with them.
Short version: successfully running GPE rom smoothly and enjoyably on a 'clean' system.
needless to say I used TWRP to backup my system. And Titanium for specific apps. Used rsdlite to flash the GPE rom from the forum here. Then I factor reset the rom, then I think I formatted internal storage space?? --at that juncture I was a little less clear what the specific sequence should have been to 'start fresh'. Should I have factory reset my device before flashing the rom? Or maybe it really doesn't matter.
Thanks for everyone's help. One thing that didn't migrate over through gcloud backups--embedded images in text msging program. relatively small loss though
cheers