Database Users

Dft vs cwm

CWM doesnt seem to work for me. Why do more cooks just do DFT?

Because its easier, and works for 99% of people if you follow directions,and also wrong section for this post.

actually just to thorw my thoughts there. i perfer DTF. i find it kind of disappointing that theres alot of CWM but not of DFT going on.
DEV's please do DFT along with your CWM!!! thank you

And to add to the posts above mine, flashing via cwm is standard on Android phones....

Cwm is way better imo. You need to use selected partitions with each build type. I say make em all flashable through cwm.

I don't get why some have issues with CWM. It's SO much simpler to use in long term operations or if you're a flashoholic. If you say it doesn't work for you, obviously you've done something wrong. Most of the time, it's all a question of having the right partition sizes. If you want ALL ROMs to be compatible, simply flash the 400Mb CWM partition layout and use App2SD+ if you have a leo. If you're a Gingerbread type of guy, flash the 150mb partition size and you're set! Personally what I do is 30mb cache, 120mb system and the rest for data.
Also, some people have issues with CWM because they most likely have issues with their flash. Easiest way to recover is to flash a stock WinMo ROM, restore SPL, format SD card and start all over again.
These forums have TONS of information on how to use CWM and get it up and running, so I don't get it...

yh I like CWM better. Just much neater I think.
Just my opinion

Plus you don't even need a computer. Also if your applying a theme and it messes up, you can just flash your recovery. Dft if you mess up you have to start over.

maybe the reason why i have not tried the CWM is beacuse of the partions stuff. i really dont get it.... and i have gotten fast at setting up ym phone. all my usefull apps are backed up on a box.net account just download and install. no problem. so yeah.
DFT all the way, until sooner or later all of them will be CWM and ill have to change over to it eventually... btu int he mean time DFT!

CWM..........it is!!

CWM is definatly easier. I will admit I was reluctant at first to switch from DFT. Old habits die hard I suppose. But now I can download a new rom and flash it from anywhere. And the backup is awesome to have!! Besides the roms are usually easier to put together for the dev's too. However, the one drawback, IMHO, is different roms require different partition sizes. If CWM were flashable from magldr, or a one size fits all standard were created this would eliminate the need for a pc connection all together.

Clockworkmod benefits=
1. You can make a FULL backup
2. You can make a FULL restore
3. You can wipe each individual part (data, system, sd-ext etc.)
4. You can flash other mods very easily
5. You can do EVERYTHING from your phone including download & flashing the ROM
6. You can wipe dalvik cache and normal cache to save space
7. You can format or partition your SD-card
8. You can store as many ROM's on your SD card to flash at a later time as you want
9. Which is most important!! you can update to a newer version of your favorite ROM without losing ONE THING!!
10. You can fix permissions and wipe battery stats
These are just 10 things I just thought of on the top of my head lol. I think most people don't like it because they haven't gave it long enough of a chance. If your coming from another Android device like me that had Clockworkmod then you couldn't live without it!! I can't think of ONE reason that MAGLDR builds are better than "flashable zips". This is just my opinion

@moto +1 - my man!

About partitions..... only thing u need to know about it is....
Look at the rom u want to flash. You need to know the size of it after it is unzipped. Think of your phone as a box. And your rom as what u want to get in the box. Your not going to fit a sense rom in a 150 mb. partition "box" because its just to big 200+mb. So get a bigger box. Use the 400mb box. If you have a non tmobile hd2 u will need more space to pack your apps and userdata into. Your rom is the first thing in the box and its already almost full, so once your phone starts packing your apps and userdata into the box it gets full really fast. This is where apps2sd and sdcard partitions come into play, think of it as strapping a smaller box ontop of your 400mb box and shipping for the same price. Basically make sure your box (partition) is big enough to fit all your **** in. Easy cheesy!!!!
Sent from my HD2 using XDA App

motoman234 said:
Clockworkmod benefits=
1. You can make a FULL backup
2. You can make a FULL restore
3. You can wipe each individual part (data, system, sd-ext etc.)
4. You can flash other mods very easily
5. You can do EVERYTHING from your phone including download & flashing the ROM
6. You can wipe dalvik cache and normal cache to save space
7. You can format or partition your SD-card
8. You can store as many ROM's on your SD card to flash at a later time as you want
9. Which is most important!! you can update to a newer version of your favorite ROM without losing ONE THING!!
10. You can fix permissions and wipe battery stats
These are just 10 things I just thought of on the top of my head lol. I think most people don't like it because they haven't gave it long enough of a chance. If your coming from another Android device like me that had Clockworkmod then you couldn't live without it!! I can't think of ONE reason that MAGLDR builds are better than "flashable zips". This is just my opinion
Click to expand...
Click to collapse
+1 Best explanation about CWM, DFT is good to start form scratch. Go with CWM and you never look back.

I just CAN'T believe it!!! People keep asking the same question everyday....
How disappointing...
Anyone left with working brain cells??
LOL

bigdookie said:
CWM doesnt seem to work for me. Why do more cooks just do DFT?
Click to expand...
Click to collapse
It's all a conspiracy, the devs all got togehter and said if they only build CWM builds then bigdookie won't be able to flash any of the builds LOL
Seriously though, CWM is so easy to use (besides the benefits pointed out by motoman) - especially if you're on magldr 1.13 - just decide what partition size you need for your zip rom (usually specified in the rom thread) and flash it - you even get to use DAF to flash the partition, so you shouldn't have any problem
To access CWM, in magldr menu go to AD Recovery and you are in Recovery mode.

I just started using CWM and love it,my main question is this. if i try a rom i like, get it all set up and working, and then make a backup in cwm, do i need to keep the copy of the zipped rom on my card, or is the backup enough?
along those same lines, if i try a second rom, and then get it set up and do a backup, can i just restore from the previous roms cmw backup file, or do i have to reflash the previous rom and then do the restore?
just curious, cuz i like trying different roms, but i want to keep a "safety" restore point no matter what rom i switch to.
I hope this makes sense?
Thanks in advance.

dezaras6 said:
I just started using CWM and love it,my main question is this. if i try a rom i like, get it all set up and working, and then make a backup in cwm, do i need to keep the copy of the zipped rom on my card, or is the backup enough?
along those same lines, if i try a second rom, and then get it set up and do a backup, can i just restore from the previous roms cmw backup file, or do i have to reflash the previous rom and then do the restore?
just curious, cuz i like trying different roms, but i want to keep a "safety" restore point no matter what rom i switch to.
I hope this makes sense?
Thanks in advance.
Click to expand...
Click to collapse
The backup will contain everything you need to do a full restore. You can trash the zip of the rom. If you need it again for some reason just download it again. You can have as many different backups as your sdcard can hold. They are saved in the clockwork folder by date and time. By the way your sdcard will fill up fast doing 4 or 5 backups so don't be alarmed when it is suddenly full, just go delete old ones. Or do like me and tape another 16gb sdcard under your battery cover(fits perfectly on top of the sim card with a lil hanging out over the battery). Flash away. Also...... we are all posting in a thread that is in the wrong section
Sent from my HD2 using XDA App
Sent from my HD2 using XDA App

Okay, so you all CWM fans jsut might have agained a new member to the fan club. But i got a question. I have a US HD2. which partion should be best for me?

Clockworkmod vs Titanium?

I've had such great help in these forums (Nook specifically) I couldn't resist trying my luck in these (Droid X) forums as well.
So, I've searched for Clockworkmod threads but they are all (That I found or noticed) from back in August.
Plenty of info to be had on Titanium Backup.
So my question, is Titanium the backup/restore program of choice? I was hoping for an idiots guide to backup and restore (especially in the event of problems) but the guides are kind of sketchy on the restore part.

Titanium
Use titanium backup to backup and restore all your apps. Useful when trying out new roms, although without the paid version of titanium you will spend alot of time tapping through the installation screens as it goes through your apps. Titanium won't help you recover a broken system.
SBF
Use RSDLITE 4.9 with a .SBF file to perform what many call a "sbf". This is usually used to restore a phone back to stock, or to recover from a bad/corrupted operating system. If your phone is unbootable, this is your recovery option. SBF'ing your phone is not as scary as it sounds, just download the system restore file (.sbf), connect your phone via usb to your computer, and use RSDLITE 4.9 to flash the phone.
Nand backups / Clockwork recovery
Use clockworkmod to do a full backup of your phone. Think of it as a clone of your phone. Restore your phone by booting into clockwork recovery and instead of choosing "backup", use the "restore" command. It will then allow you to select one of the backups you have made with clockwork. Pretty easy stuff here.

jeftep said:
Nand backups / Clockwork recovery
Use clockworkmod to do a full backup of your phone. Think of it as a clone of your phone. Restore your phone by booting into clockwork recovery and instead of choosing "backup", use the "restore" command. It will then allow you to select one of the backups you have made with clockwork. Pretty easy stuff here.
Click to expand...
Click to collapse
Thank you, this is exactly what I was after. My only problem remains that I do not see any guides on how to go about downloading/installing/operating this program. I'll keep searching now that I know more about what I'm searching for. Thanks!

Search the market for "rom manager", it's free. Load it and tap "flash clockworkmod recovery".
You can use this app to reboot into recovery or by holding down the home and volume down buttons while pushing the power on button.
You can also download the DX bootstrapper from koushik's site, just google "koush bootstrap". Also free.
Sent from my DROIDX using XDA App

Woah there buddy.
I'm going to clarify this process a bit for you before you mess something up, if you don't mind.
Root your phone.
The simplest method is to search for Z4Root here in the forums...it's a .apk that roots your phone for you.
Now...
I assume you want a sweeeeeeeet rom, ya?
We can do that...
MY personal recommendation would be this...
Make sure you have at least 2-3 gigs free on your SD...it won't need to STAY that way...but during this process, it will.
Open your contacts.
Click the options button.
Backup your contacts to your SD card.
Now download Titanium from the market...
The free version works fine for 99% of what you need.
The only problem is (as mentioned) you have to manually click the "install" button for all 500098098098 of your apps when you restore...as opposed to just one button and letting it work for a few minutes.
Open Titanium and backup all of your apps+data.
Do you want Liberty 2.0? I personally use it and LOOOOOOVE it...but you currently have to pay $5.99 for it...a free version should be released soon.
If you do...just download liberty toolbox donate from the market.
It will install the rom for you! The option is under the "Rom Manager" part...
Make sure you select both options when installing....The "Backup" and "clear data" ones.
If you don't want liberty...read below...if you've chosen to pay the $5.99...skip down to the ****** below.
Download either DX bootstrap or Rom Manager.
Rom manager actually installs Clockwork...where bootstrap is simply a method of booting into clockwork via an application.
Either work fine.
Find the ROM you'd like to install and download the .zip
Put the zip on the root of your SD card.
Boot into clockwork.
(With DX bootstrap you click "bootstrap" and when it finishes click "reboot recovery")
Backup. (Camera button selects options, volume moves up and down, and power moves back a page)
Now Wipe Data/Factory Reset
Now...Wipe Data/Factory Reset
And again.
And again.
I usually do that 3-4 times just for extra security.
Now install zip from SD card.
Pick the "Choose Zip from SD card" option.
Find your rom's .zip
Click Reboot.
******
CONGRATULATIONS!
You're running a custom ROM!
Now...if you're contacts don't automatically start restoring...
You can choose the backup that you made from the options menu in your contacts.
Now...restore all apps+data with Titanium.
And you're back to where you were before the rom.
All your contacts...all your apps...
You may need to go back into your settings menu and change those back to your exact specifications.
Now...
If you don't like your rom...
You can boot into recovery again...
And restore to where you were previously with one click.
At this point after deciding I like the rom (I don't keep much free space on my SD)
I usually move my nandroid backup from before the rom to my computer...and delete it from my SD card...and then do another backup of my current (rom'd) setup.
I keep a copy of the titanium backup on my PC as well...and delete it from my SD card...there is no reason to waste a gig of space that can easily be transferred back when needed.
My recommendation is to always have you're most recent nandroid backup on your SD card and a copy of your last few on your computer.
You can rename the backup folders for organization...but don't use any spaces or special characters.
If you're REALLY hurting for space...
You can delete the nandroid backup safely if you have a microSD reader on your computer...in the case that your phone doesn't work and need to transfer the backup back onto your SD card.
Happy modding!

Thanks for the info, all of which answered my question just right. I've been using Gingerbread rooted & deoxed since Friday and it is quite nice. The improved battery life is phenomenal!

I want to STRONGLY recommend that everyone who is new/does not know what they are doing actually go through the process of flashing the rom. I was inexperienced once and I hard bricked it (unfixable). No one needs to go through that and anyway that's what keeps our bootloaders locked.
INCREDIBLY IMPORTANT STEPS
If you do not wipe data/cache/dalvik cache/battery stats, you will bootloop. Repeatedly wiping is not at all necessary but its good for ocd.
If you do not mount system and data, your phone WILL NOT BOOT and you will have to sbf.
SBF'ing is not difficult but a pain in the ass. First of all you do not need version 4.9. I used 4.7 three days ago to flash the most recent system version. Make sure that you have the file for your bootloader version or again your phone WILL NOT BOOT.
That being said, I have found that all problems are almost always careless mistakes or at least mine have been
You will find that as long as you're careful and follow all instructions, you'll never have any problems

Ok. Great info. I have been reading through the stickies n then came across this.
I am currently running darkslide 4.2 with blur. Flashed using clockwork mod on DX rooted with z4. I know that's alot of acronyms but yall understand. I used the bootstrap to get to clockwork and load everything using astro file manager.
Here is the question.
Do I have to wipe my cache in clockwork or can I leave it? So far I have left it n its running fine but doesn't seem any faster and my battery runs down in about a day.
I also use Titanium to back up my stuff but do I ha e to back up everything manually or is the free version one touch good enough? I noticed there are alot of things not backed up in to do list. I will happily get the donate version if its recommended.
Thank you all for your time and effort to answer our beginner questions.
Sent from my DROIDX using XDA App

Glad to see you are making progress, jperro. It never hurts (in my experience) to wipe the cache.
The paid version of Titanium backup lets you perform batch operations without interacting with every single install screen. There are other features that make it good, but thats the main one that saves you time/frustration.
I only back up a few system apps/data like Contacts Storage and Wifi Hotspots Storage. If I'm restoring my phone, chances are I'm either trying a new rom and I don't really want to muck it up with any old data - so I don't back up all the system apps/data that Titanium Backup shows as "not backed up". Besides, I've got nand backups in case I'm flashing back to a previous setup, so restoring system data or apps via Titanium seems redundant.

Ahhh. Ok. Thanks jeftep for the info. Very useful and informative.
Sent from my DROIDX using XDA App

[GUIDE] Install CyanogenMod 7 on the SGS i9000 (and live to tell the tale)

OK, the CM7 ROM for the Samsung Galaxy S i9000 has now hit the CM7 Mainstream and has matured in leaps and bounds over the last few weeks. The installation method has therefore ALSO matured by leaps and bounds.
However, there has been a downside to all that advancement...namely that there are lots and lots of incorrect install procedures floating around out there and even more misunderstandings as to what/how/when/why you install CM7 on your SGS i9000.
Therefore, this is intended to be the definitive guide about how to install CyanogenMod 7 (or CyanogenMod 7.1 if you are a stickler for such things since that is the most recent stable version but for the purposes of this guide it is STILL CM7) on the i9000 right here, right NOW. As things change, the first post of this thread will be updated.
If you have any questions/comments about the CM7 install procedure, post them here.
If you have any questions/comments about CM7's features, capabilities, battery life or anything OTHER THAN installing it...look HERE or HERE.
Before we do anything....make sure of the following:
* Your phone is fully charged.
* You have confirmed you can get into download/recovery with the three button method.
* You have used Titanium Backup to backup your apps (yes, there may be some factory defaulting happening soon).
* You have taken a Nandroid backup via Clockwork Mod, just in case the early steps go south.
* You have used a third party program to back up your SMS messages (if so desired)
* You have made your peace with your loved ones and said all your goodbyes...maybe left a nice note or something.
Remember, this will be one of the most harrowing, horrific experiences of your life. Grown men have been known to gnaw off their own legs during this procedure, unable to face the deepening horror their feeble minds cannot hope to comprehend.
Are you SURE you want to install CM7?
Very, VERY SURE?
OK, its your funeral, I am just here for the open bar.
OK, here we go....
FIRST STEP!!!!! THE PRE-INSTALLATION TANGO!!!!
Boy are you lucky to be doing this now. Recently CM7 was improved so that it works just fine with either Froyo or Gingerbread Bootloaders. It used to be that when you installed CM7 with Gingerbread bootloaders, a puppy died in agony. Now, the cuddly little puppies are safe thanks to the hard work of the CM7 Devs.
However, if for some strange reason you have still have Eclair installed currently, smash your head repeatedly against a wall for being such a stinking Luddite. Once you wake up, update to Froyo or Gingerbread and then come back and start this again. Plenty of threads on XDA will help you do that. Go read one and flash froyo or gingerbread via ODIN, we'll wait right here with the car running.
Don't know how to use ODIN? Not sure about all those little checkboxes? Befuddled by those driver thingies? Unsure how to click on the links above while using a Commodore64? Well, we won't wait in the car THAT long. If this is the case then you absolutely shouldn't be flashing CM7 yet my poor lost child, educate yourself for awhile and then come back, or just buy a used iPhone.
OK, still with me? ONWARDS.
SECOND STEP!!!!! THE NITTY GRITTY DETAILS, AKA THE CALM BEFORE THE STORM!!!!!
Here is the point where you need to do all sorts of things that you may have already done.
If you have already done them, GOOD, you are very, very clever and ahead of the game. Give yourself a gold star.
If you don't know how to do any of these things, then you shouldn't be here yet. Go search for things you don't understand in the general and Q&A forums for the i9000 and when you feel you are better grounded in the arcane mysteries of flashing custom ROMS, come back and we will have a joyous reunion and try this again.
OK, so what do you do in STEP TWO?
* Doublecheck that you can indeed get into Download Mode using Vol Down+PWR+Home, and into Recovery with Vol Up+PWR+Home. If not, go away and search XDA for a way to fix that.
* Root your phone.
* Confirm you have Clockwork Mod recovery running. If not, use Odin to flash this Speedmod kernel if you are on Froyo. If you are on Gingerbread flash the TalonDev kernel using the v2.2 tar (yes I know the TalonDev kernel has lagfix automatically enabled, but as your file system will be grabbed and ripped out still beating and then replaced with a better one by the CM7 Installer, it really doesn't matter). There are two different versions of the v2.2 tar available but don't panic. Use TalonDEV-0.2.2R2-I9000-1200-JVP.tar first...if that doesn't work for you, try TalonDEV-0.2.2R2-I9000-JVP.tar. One of the two should work for you. (Thanks to chan1628 for testing them the hard way)
* Install ROM Manager (I STRONGLY suggest you buy the Premium version if possible to make flashing Nightlies easier. It is quite cheap with a lot of great features and is one of the core apps you will use on your phone from here on in...plus Koush deserves your support).
* Take another nandroid backup (even if you took one already) and confirm your Titanium Backup is up to date (and includes a backup of ROM Manager).
* Confirm that you are rooted.
* Backup your contacts to either Exchange, Gmail or your SIM card.
* Write down your correct APNs and your IMEI, just in case.
* Take a backup of your efs folder and save it somewhere.
* Post a note on your monitor reminding yourself to breathe.
* Say goodbye to your Samsung apps like Snap2Go and Daily Briefing, they won't work with CM7.
* Pour yourself a stiff drink
Confused? Not sure how to root your phone or worried about voiding your warranty? Really curious about what these APN things and where can you find them? Hoping to sync your phone with iTunes once CM7 is installed? Then go away, do some searching, get up to speed and I will see you later. I mean it...avaunt ye. Scram. Exeunt with all due alacrity. Happy reading.
Also, if you are getting errors concerning CWM, or cannot get into CWM3 Recovery, then search XDA (or the comments to this thread) for a solution. I cannot help you. I am not an expert on Clockwork Mod, I am just here to get CM7 running for you, or kill you and steal your girlfriend in the attempt. Clockwork Mod is YOUR lookout.
Still here? Did all that? CWM Recovery working properly? Crossed all your i's and dotted your t's? Forward then. Things get REALLY BAD from here on in. Whatever happens next, I am truly, truly sorry.
THIRD STEP!!!!!! THE COMPLEX, AGONIZING EXPERIENCE OF FLASHING THE ROM ITSELF!!!
Are you sure you are ready for this? Are you quite, QUITE sure?
It is not too late to turn back....and if you do no one will think less of you. I promise.
Positive you are where you want to be?
Brave, brave darling. Take my hand and lets do this then....there are two possible methods to use now that you are at the Third Step..Method the First uses the ROM Manager and is by far the simpler of the two. However if the ROM Manager doesn't work for you or if you have a sudden premonition of flaming disaster about it....don't cry. Man up and go to the manual method listed after Method the First, known quite coincidentally as Method the Second.
Method the First!
Open ROM Manager from your App Drawer.
Select Flash ClockworkMod Recovery.
When it asks you what phone you are using, scroll down until you find Galaxy S MTD and select it (Galaxy S is what CM7 calls the i9000 series...CM7 is weird that way).
When it asks what version to use, select CMW3.
By the way, if ROM Manager tries to argue with you during this process, or tells you your phone may not be supported, ignore it and click OK or Continue or whatever it takes. It just worries over what you may be about to do to yourself.
Confirm that under Flash ClockworkMod Recovery it now reads Current Recovery: ClockworkMod 3.x.x.x. This means that now you should be able to see CyanogenMod zips and nightlies (if you have ROM Manager Premium) in ROM Manager. Hoorah!
Now, the moment of truth arrives...select Download ROM.
Next close your little eyes tightly and select CyanogenMod or CyanogenMod Nightlies (if you see that one). Either one will do.
Down the road, you will use the CyanogenMod Nightlies files to update...assuming you survive the next 15 minutes. However when installing you can use the single file in the CyanogenMod folder (there for Free users) or the latest Nightly in the CyanogenMod Nightlies folder...same difference.
So click the file of your choice and stand back...well, not too far back because there is more stuff you have to do.
If/when you are asked if you wish to reinstall Google Apps, it is highly recommended that you do so, so check the little box. This saves many headaches and potential fc's down the line.
When you are asked what you wish to do to prepare for the new ROM, you can choose to do another Nandroid Backup, Clear Data and Cache (wiping the device) and/or Clear the Data Cache. No need for another Nandroid backup, but select the other two and hit OK.
Now let the ROM Manager make some magic. It will take a couple minutes but likely not nearly as long as you expect, so go out and make tea or paint the Sistine Chapel or something.
While you are gone your device will do all the wiping and installing, back up your efs folder and apply the new file system you will need. You will NOT need to apply any lagfix or mess about with tweaks or whatnot....CM7 does it all for you and no other options are possible....so don't ask.
Method the Second!
If for whatever reason you are having trouble working with ROM Manager in the previous method and are therefore stuck, you can do the following to flash CM7 manually.....but if you have a weak heart or tend to get squeamish...I implore you to look away.
Download this most recent version of CM7 from http://download.cyanogenmod.com/?type=nightly&device=galaxysmtd
Then download the most recent set of Google Apps from http://goo-inside.me/gapps
Place both on your SD card.
Go into Recovery using the handy-dandy Three Button Skidoo (NOT by using the command "Reboot to Recovery" found in ROM Manager...you have been warned).
Do a Factory Reset (wiping data so if you forgot to backup your apps before....whoops)
Wipe the Dalvik and Cache (just in case).
Select Install Zip from SD Card and flash first the CM7 zip, and then the gapps zip. No need to reboot in between. Finally fix permissions.
NOTE: If you are one of those people who have done some research and have also downloaded one of the CM7 custom kernels which you wish to flash as part of your install (if you haven't don't worry about it, I don't recommend using a custom kernel before you have spent some time with the stock kernel, but some people think they are 1337)...make certain you flash the Nightly BEFORE the custom kernel, otherwise you will totally confuse the installer and very bad things will happen which will require you to flash back to a Samsung ROM using ODIN and start all over again.
Once everything has completed, THEN reboot into CM7 (HOO-RAH) and continue to the Fourth Step. Hurry, hurry, scroll back up....
GO!!!
Oh, WAIT A MINUTE....When you have done all the stuff in the Fourth Step, do this too...go to ROM Manager, and select Flash ClockworkMod Recovery. ID your phone as Galaxy S MTD when it asks and select CWM3...it will tell you that your phone is not supported or some such but have it install it anyway. What the heck does it know. Doing so will ensure you can find your the Nightly updates using ROM Manager Premium in the future.
OK, now go on to the Fourth Step...really this time...
GO! GO!
FOURTH STEP!!!!! STEP OUT INTO THE LIGHT AND BREATHE THE FREE AIR
That's it, you are done. Throw back that drink now...or if you don't want it, I'll take it.
Your phone will show the CM7 SGS splash screen for a bit, then the CM7 boot animation for a while longer (spin, spin, spin)...and then you will be in CyanogenMod 7.
If you find that the boot animation never seems to end, or keeps restarting...DON'T PANIC. This happens to some people when flashing CM7 for the first time. Just go to recovery and flash the Nightly again, you should be fine. If you used ROM Manager the first time, the nightly will be in the ROM Manager folder on your SD card.
Where is all the pain, the agony, the brain bending complexity reducing scholars to madness that I warned you about?
OK, I lied...but I had to make sure you were serious.
Now restore your apps (remember that is best to do fresh from the Market, but if you use TB then be sure to reinstall just the APP, not APP + DATA, and NO SYSTEM APPS) and put all your contacts and email addresses back and so on.
Also, remember that your external SD card is now located in the /emmc directory. Why? Because that is how it is in CM7, so cope. It really is NOT that tough to get used to. However, if you want to have some kicks, go into the CM7 Dev thread and ask where your external_sd card has gone a few times to watch people go berzerk yelling at you. Fun, fun, fun.
From here on in, you can install nightly updates to stay on the bleeding edge of CyanogenMod, as well as to allow yourself to experience the terror of waiting for that boot animation to stop again and again and again. You can look at the Nightly Wiki for instructions on different flashing strategies.
You may also install custom kernels and alternate modems via Recovery if you wish, but be sure that they are CM7 compatible. The ones you used back on Samsung ROMs won't work for you any more.
Carry on, and enjoy your new ROM.
As always, if this procedure bricked anything or gave your dog syphilis, it isn't my fault. By God, I WARNED you. If you liked it, or it worked out well for you, feel free to click Thanks and heap praise in the comments.
Finally, all due honour and thanks to the incredible Devs and Maintainers of TeamHacksung and the SGSTEAM listed below. Find their profiles and donate to them, they have earned it.
* codeworkx - http://twitter.com/codeworkx
* atinm - http://twitter.com/atinm
* coolya - http://twitter.com/coolya

Great guide, just want to make a quick addition...
rschenck said:
OK, so what do you do in STEP TWO?
* Root your phone.
* Confirm you have Clockwork Mod recovery running. If not, flash the Speedmod kernel.
Click to expand...
Click to collapse
I couldn't complete this step during my exciting first install of CM7
If anyone has trouble getting Clockworkmod Recovery running, and you can't manage to flash a new kernel using Odin/heimdall please read:
[RECOVERY] 3e Recovery Modded w/ No Verification

I just skimmed through it but wouldn't this require you to buy rom manager premium?

runedrune said:
I just skimmed through it but wouldn't this require you to buy rom manager premium?
Click to expand...
Click to collapse
No. The premium version is only required to download nightlies directly through the app. Download them manually, then point rom manager at the zip on your sdcard & install.

Yay! First thanker! Nice guide too.

runedrune said:
I just skimmed through it but wouldn't this require you to buy rom manager premium?
Click to expand...
Click to collapse
Not the install, that is free as far as I know. Installing nightlies via ROM Manager needs Premium. Plus I suggested people buy Premium anyway.

sambwel said:
No. The premium version is only required to download nightlies directly through the app. Download them manually, then point rom manager at the zip on your sdcard & install.
Click to expand...
Click to collapse
Exactly. The instructions tell you to use rom manager to download CM7. Just thinking that http://download.cyanogenmod.com/?device=galaxysmtd should be included too for those that can't buy rom manager.
But anyway great guide rschenck. Hopefully it'll save us from unnecessary questions.

runedrune said:
I just skimmed through it but wouldn't this require you to buy rom manager premium?
Click to expand...
Click to collapse
Yepp true story!
IF you want to download roms and stuff from Rom manager you do have to have premium.

I have no plans to install yet (still waiting for the stable release) but really this guide has no boring part. Very informative and easy to follow. Just wanna say thanks for this guide. KUDOS!

Nice tutorial man. I want to instal cm7 and this tutorial is very helpfull. Hope this topic get sticky :d

upgrading to latest
just to clarify, I'm (thanks to you!) on v11 due to some people suggesting me that version over v14. After reading some I would like to flash the new experimental build (v15?) in order to do so I:
1) charge it up
2) do a nandroid backup /done
3) wipe data/factory reset + wipe cache in CMW /not sure about this, I've read some diferent post about what to wipe. Some said that when upgrading only cache + dalvik will do just fine. This is the main issue.
4) flash the v15 (update-cm-7-05282011-NIGHTLY-GalaxyS-signed.zip) through CMW
+ all that other stuff like preparing myself for long agonizing experience and stuff
thanks in advance!

James.q said:
just to clarify, I'm (thanks to you!) on v11 due to some people suggesting me that version over v14. After reading some I would like to flash the new experimental build (v15?) in order to do so I:
1) charge it up
2) do a nandroid backup /done
3) wipe data/factory reset + wipe cache in CMW /not sure about this, I've read some diferent post about what to wipe. Some said that when upgrading only cache + dalvik will do just fine. This is the main issue.
4) flash the v15 (update-cm-7-05282011-NIGHTLY-GalaxyS-signed.zip) through CMW
+ all that other stuff like preparing myself for long agonizing experience and stuff
thanks in advance!
Click to expand...
Click to collapse
You are quite correct...when upgrading all you need to do is wipe dalvik cache. You can also take a nandroid backup if you wish to be extra careful but there is no need to wipe data for an upgrade.
Sent from my GT-I9000 using XDA Premium App

rschenck said:
You are quite correct...when upgrading all you need to do is wipe dalvik cache. You can also take a nandroid backup if you wish to be extra careful but there is no need to wipe data for an upgrade.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
thanks! .. so is it just wipe cache or both wipe cache + wipe dalvik cache in advanced menu? I get confused with that

James.q said:
thanks! .. so is it just wipe cache or both wipe cache + wipe dalvik cache in advanced menu? I get confused with that
Click to expand...
Click to collapse
Wipe cache is in the main cwm menu, wipe dalvik is in advanced...and you can wipe them both.
Sent from my GT-I9000 using XDA Premium App

Thanks mate, you made my day! I haven't laughed so hard in a while ...

James.q said:
thanks! .. so is it just wipe cache or both wipe cache + wipe dalvik cache in advanced menu? I get confused with that
Click to expand...
Click to collapse
Yes, you should do both

A few small edits and clarifications added...

Good job on this guide.
You kids gave it easy. Back in my day, we had to flash our phones in Morse code.
Sent via XDA Premium app on my GT-I9000 running CM7 (GB 2.3.4)

bump...and if anyone who has used this guide has feedback or suggestions, please comment with them.

How come when i go to download rom i cannot see cyanogen mod there?
I did buy the rom manager

Some questions about Galaxy Tab 2 7.0 and root/ROMs, etc.

Just got a GTab 2 7.0 a few days ago. A P3113, so only 8GB of storage, about half of which is the ROM and crap apps. I've rooted before (had a KF 1st gen when it came out), and just wondering about a few things with the GTab:
Right now, I don't mind the stock ROM so much. There are problem things that would be "nice to have", but right now, would like to generally stay as "stock" as possible. That being said, I'd still like to "de-crap" the ROM to free up some storage space, and I assume that might lead to it running a bit better, since so much seems to just pop-in while running other apps. So:
I know I need to root first, so my first question - how reliable is that? I'm on a Mac, but have access to a netbook running Win7, so could run Odin to "get things done". I'd hate to brick the thing, still having 51 weeks of warranty left. (I also understand that I might want to install something else to keep the flash count from showing it's been flashed).
Once root'ed, is it better to use one of the "de-crapped" ROMs floating around? And if so, which seems "best" (yeah, I know the moderators hate the "which is best" - I'm looking for stock - and STABLE)
Or, is it better to eliminate the apps myself? (Not sure if this is a wholesale "rm" to remove certain apps from a terminal app, using adb, or if they have some uninstallers embedded somewhere, or...) - so better to use one of the ROMs floating around?
Is the GTab 2 "stable", so even if you trash a ROM, you can still get into the ROM manager to restore a previously working, or stock, ROM?
I'll probably come up with a couple more questions, especially depending on the replies... TIA

Hi..
I can answer some of your questions. I hope that helps!
1- Rooting is easy and reliable. you may use "CF-Auto-Root" tool (search for it in XDA forum).
But you need to remember that rooting and custom ROMs void your warranty.
2- If you just need to free some storage space, you may use an app such as "Clean Master" to uninstall system apps and get rid of temp and junk files.
3- If you opt to use a custom ROM make sure it is very well supported and maintained.

aisais said:
Hi..
I can answer some of your questions. I hope that helps!
1- Rooting is easy and reliable. you may use "CF-Auto-Root" tool (search for it in XDA forum).
But you need to remember that rooting and custom ROMs void your warranty.
2- If you just need to free some storage space, you may use an app such as "Clean Master" to uninstall system apps and get rid of temp and junk files.
3- If you opt to use a custom ROM make sure it is very well supported and maintained.
Click to expand...
Click to collapse
Thanks - but prior to using Clean Master I assume I better either get a stock image to reload, or use CWM so I can make a backup of the ROM before messing something up?

tundrwd said:
Thanks - but prior to using Clean Master I assume I better either get a stock image to reload, or use CWM so I can make a backup of the ROM before messing something up?
Click to expand...
Click to collapse
Taking a backup is always good thing to do. I suggest you try clean master to know how it works and what does it do.

aisais said:
Taking a backup is always good thing to do. I suggest you try clean master to know how it works and what does it do.
Click to expand...
Click to collapse
Thanks - I plan to use Clean Master. Allows me to be selective about what I remove/move, instead of getting a ROM from someone and they removed the ONE THING I really wanted.

Ok, got it rooted and CWM installed.
HOWEVER, when I boot into CWM, I DON'T see an option to backup my ROM (I've used TWRP before on my KF, so the menu is different).
What I've got on my screen in CWM:
Android system recover <3e>
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache​
That's it. Where's the option to do a ROM backup? Oh, used file P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip Had CWM and Root all in one. I do have GT-P3113_ClockworkMod-Recovery_6.0.1.0.tar as well. Should I just go through procedure again to flash this CWM? Will it still retain SU?

nandroid backup ok to use? Seems it's just a wrapper for a backup script...

Ok - I'll reply to myself.
I don't know what was wrong with the CWM I installed via the aforementioned file (P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip), but I went to the CWM site, D/L'ed the latest touch enabled CWM for the P3113 (6.0.2.3, I believe), and installed it over the existing recovery image on the device (I had to create my own .tar.md5 - easy with *nix).
Anyway, I now have access to the backup options by scrolling down. The image from P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip, simply wouldn't scroll beyond what I listed earlier. Now can scroll down, make backups, etc.
Haven't tried yet to re-install the image I made with nandroid - I'm a bit leery of that - so I'll just get the stock 4.1.1 ROM from sammobile, and keep it around....

tundrwd said:
Ok - I'll reply to myself.
I don't know what was wrong with the CWM I installed via the aforementioned file (P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip), but I went to the CWM site, D/L'ed the latest touch enabled CWM for the P3113 (6.0.2.3, I believe), and installed it over the existing recovery image on the device (I had to create my own .tar.md5 - easy with *nix).
Anyway, I now have access to the backup options by scrolling down. The image from P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip, simply wouldn't scroll beyond what I listed earlier. Now can scroll down, make backups, etc.
Haven't tried yet to re-install the image I made with nandroid - I'm a bit leery of that - so I'll just get the stock 4.1.1 ROM from sammobile, and keep it around....
Click to expand...
Click to collapse
That's exactly what I did today, grabbed the stock image for a backup, rooted with Odin and CWM then flashed a CM based 4.3 ROM. Piece of cake.

AllianceRom Issues Verizon GS5 4.4.2

After searching for a fair while i've come to the conclusion that there aren't any threads that pose my set of issues. I've tried installing AllianceRom several times, i follow their instructions to the letter, and everytime i end up with a failed extraction, i've re-downloaded the ROM twice now and am simply unsure of how to continue, i would LOVE to see their rom in action and how it functions i'm just at a loss for how to continue, steps i take with safestrap as such.
1. Reboot into recovery
2. switch to rom-slot 1 (also tried the other numbers.. just in case)
3. create the slot, wipe it
4. install zip file ( tried from different folders, on both internal and sd storage)
5. facepalm i'm not sure what to do now i'm slightly sad because it's the seemingly coolest looking rom, there's so much customization options to it.. i just want it hopefully someone out there has an answer, and if not i'll let the subject die for now, thanks for your time to anyone whom reads this.
-brando

brando5055 said:
After searching for a fair while i've come to the conclusion that there aren't any threads that pose my set of issues. I've tried installing AllianceRom several times, i follow their instructions to the letter, and everytime i end up with a failed extraction, i've re-downloaded the ROM twice now and am simply unsure of how to continue, i would LOVE to see their rom in action and how it functions i'm just at a loss for how to continue, steps i take with safestrap as such.
1. Reboot into recovery
2. switch to rom-slot 1 (also tried the other numbers.. just in case)
3. create the slot, wipe it
4. install zip file ( tried from different folders, on both internal and sd storage)
5. facepalm i'm not sure what to do now i'm slightly sad because it's the seemingly coolest looking rom, there's so much customization options to it.. i just want it hopefully someone out there has an answer, and if not i'll let the subject die for now, thanks for your time to anyone whom reads this.
-brando
Click to expand...
Click to collapse
Have you tried flashing to stock slot yet? rom slots have many known bugs as of now and most ROM devs recommend flashing to stock slot and avoiding rom slots.

MrHyde03 said:
Have you tried flashing to stock slot yet? rom slots have many known bugs as of now and most ROM devs recommend flashing to stock slot and avoiding rom slots.
Click to expand...
Click to collapse
I have not, all honesty i'm super new to the entire process and thus far I haven't done that because i still use my stock rom on occasion flipping back and forth between the two and I'm primarily terrified of bricking my phone. What process would i go through to get my stock rom backed up and assuredly not going to be screwed out of it not existing before i tried flashing to the stock slot? I know i sound paranoid because i really am especially after it not working =/

Possibly figured it out
If i'm correct, i now know the issue. the file site dropped some people's network connections, and i'm guessing since my file size was only ~650 mb that was my issue, if not i'll inform you otherwise i'll be deleting the thread, thank you mr. hyde

brando5055 said:
I have not, all honesty i'm super new to the entire process and thus far I haven't done that because i still use my stock rom on occasion flipping back and forth between the two and I'm primarily terrified of bricking my phone. What process would i go through to get my stock rom backed up and assuredly not going to be screwed out of it not existing before i tried flashing to the stock slot? I know i sound paranoid because i really am especially after it not working =/
Click to expand...
Click to collapse
1. Reboot to safestrap
2. Activate stock slot
3. backup -> data and system should be checked only
4. Wipe data/factory reset option
5. Install -> romfile.zip
6. Reboot.
If you want to be safer, after step 3 backup, reboot back to your system and copy the backup folder from external sd/ TWRP/######/backup folder. This way you'll have a backup on your computer in case something breaks. The nice thing is, safestrap is safe and won't (shouldn't..) brick your phone.
EDIT: just saw your recent post. yes, the alliance rom zip file should be 1gb or greater.

MrHyde03 said:
1. Reboot to safestrap
2. Activate stock slot
3. backup -> data and system should be checked only
4. Wipe data/factory reset option
5. Install -> romfile.zip
6. Reboot.
If you want to be safer, after step 3 backup, reboot back to your system and copy the backup folder from external sd/ TWRP/######/backup folder. This way you'll have a backup on your computer in case something breaks. The nice thing is, safestrap is safe and won't (shouldn't..) brick your phone.
EDIT: just saw your recent post. yes, the alliance rom zip file should be 1gb or greater.
Click to expand...
Click to collapse
Well, it worked (go figure i feel like a dumbass), however after all of it i realized looking at oyur name that you seemed familiar for some reason. The first ROM i flashed, was yours. Thanks for that, it's very well made.