Hi guys!
Upgraded this phone to WM6.5, but keyboard layout was wrong. Decided to reflash with another ROM, tried - but process stuck on 23%. Now only 3-color bootloader and can't do anything. Is there any stock ROMs for Alltel available? Need to revive my phone.
upd: problem fixed with my RIFF box
Related
Hi guys!
I've got bricked HTC 4350 from one of our employees - seems it has drowned
But in some way it still works - it boot into bootloader (RGB screen), connects via usb, I can even flash it with official RUU. But after flashing ends it still boots into bootloader. Tryed to fix it using mtty but recieved message that task command is unknown.
Maybe you have any ideas how to unbrick it?
Or it is lost?
Thanks in advance!
Sorry for posting it here, please delete.
This is the story:
I bricked my phone (Elf) because I didn't CID unlock it after installing the Opal 6.1 rom. So when I tried to install the backup ROM I made it got bricked. I read all the threads about how to revive the phone and I can't get any to work.
I can't do the GoldCard since I don't have a working WM phone. So I tried the Wild card unbricker ROM and the phone got worse. Now I only get to the tri color screen without any "RUU" at the top and every time I try to flash another ROM on it it shuts and I get an error message saying something like "Invalind vendor or error in image" etc... Please help me, what happend??? I cant flash any ROM. I cant do hardspl. I can't do anything.
PLEASE HELP ME! Anyone who's familiar to this problem?
Thx in advance!
Hi
I've got a HTC Hermes that won't boot up properly.
I've had a quick search and can't find to find the exact same proble but apologies if this has already been raised.
I previously flashed my T-mobile ROM with RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar.
The problem started when I downloaded a Registry Optimizer from Windows Update. When I started using this my phone was not in airplane mode, and just hangs on the logo screen (this is the gold Tai Edition)
I tried to do a hard reset (this goes to the screen with the four colour bands on it), and then when I reset it again it just switches to the logo screen and stays there. After a while, the screen goes white and stays there
I've got only a basic knowledge of flashing ROMs and when I first flashed my ROM i used Hard SPL and the basic AT&T Windows 6.1 ROM, before using TAI's custom one.
I presume I need to try and re-install the ROM (via the SD card, as Active Sync doesn't recognise the phone)
I was aware of risks whilst using the Registry Optimizer and realise that this is my fault, so I'm not expecting any quick fixes
Would be grateful though if anyone could point me in the right direction, if my phone is recoverable, and not bricked.
Cheers
You flashed a rom for the Kaiser.... You have a Hermes...
Looks like a brick to me....
If you use the sd card method you might be able to fix BUT make sure its a Hermes rom....
Thanks for pointing that out!
I found the thread on how to unbrick a hermes, so should be ok from here..
I got my HD2 only five months back, and it's a TW version flashed with HK official rom release. It worked well until official 3.14 rom has come. I flashed the 3.14 HK version rom and when restart, it stuck up at first boot screen(HTC LOGO). After reset it cannot enter the OS any more and only go to the bootloader. I tried flash all kinds of roms and every time flash was success but it still goes to bootloader directly. Finally I took MTTY and without luck my HD2 got bricked after executing some "task ". It would't turn on at all. So I think it is totally bricked and took it to JTAG repair. The strange thing is, when it is fixed with JTAG and it will boot into a completely white screen(no htc logo). After many times JTAG fix still only white screen.
Anybody can help me with the problem and tell me what happened to my HD2, any luck it can be revived?
Welcome to forums
Perhaps this thread can help you, also try reading the Wiki.
Hope it helps and good luck,
¿that I must do?
hello, I need urgent aid I have a T-Mobile HTC HD2, with 2,08 SPL Cotulla was installing a new ROM, whatever I finish process 100% no longer ignites this dead. that I must make to recover it? I pressed the back button of reset and it does not do anything. I wait for its quick one replaced, thanks eduard
What ROM did you attempt to flash? If it was one that isn't for the US TMO HD2, then you sir have a bricked device that cannot be fixed by us, only by sending it to HTC.