Hi all, I'm new here, and I haven't found anyone with my same problem (even though one had it but resolved unistalling everything he had installed more than the ROM...of course i have already tried and even formatted my phone & reinstalled the ROM, but nothing changes)
When I try to data connect 2 messages appear to me..the 1st one says:
"Not able to connect
The answer's modem is disconnected. To verify & eventually modify the connection settings, touch "Impostation"" (I'm translating directly from Italian )
if I press ignore, the 2nd message is right back the 1st:
"Attention
A problem has been verified in the connection of the GPRS service using the registered domestic net"
Any clues? I'm running the latest official italian htc windows 6.5.5 ROM, and I updated to the last RADIO ROM
Thanks
p.s.: the little "icon" near the signal strenght is not white as it always was, but it seems "dotted", like if it is trasparent, even if it does calls & such, it can't connect to internet...
EDIT: I can't access to my home's wifi neither! I can connect to it but it doesn't go to internet (of course it works on every other computer :S)
Related
He all,
I got some connection problems.
If i insert my WiFi card(sandisk 256+WiFi) my I-mate detects it and the antanna is displayed in de buttom of my screen but whenni go to my browser(internet) the message :Cannot connect with current conection settings. To change your connection setting, tap settings.
But i have no id how to change the settings to make it work with my wireless network.
Also the WiFi card couses to freeze the system every once and while.If i take the card out everything is okey again.
I got the I-mate jam with latest rom and radio drivers and I already installed the drivers of the WiFi card.
I hope you guys can help me out with this one
Thanks in advance
GreetZ
Nick
Nobody that can help a poor guy out ?
GreetZ
Nick
I had a similar problem with my XDAII, believe it is likely to be a known problem and related to the dual function of the card.
Have you tried the website for updated drivers?
The other options are to ensure that it you have the correct settings for Work or Internet to connect to.
I assume you are connecting to a wireless Access Point on a home based WIFI system, or are you trying to connect to public hot spots?
Contacted clubimate?
It started after I installed the latest rom version you guys think I migh work if I installed the older version?>
GreetZ
Nick
which rom are you referring to, an original manufacturer version or a cooked rom from this site?
if it is a licensed version, I would contact imate, have you installed the latest drivers from the hardware supplier?
I think you may have to go to your wireless settings and ensure connect to the internet is selected. also,scan local networks and ensure you are connecting to the correct network.
my problem when I got that message was cause it was connecting to the guy next door with wep key required.
are you able to connect to your host pc via wifi using a mapped network drive? or are you simply using a wifi hotspot?
if using a wifi hotspot, you should select auto connect to non-preferred networks.
start - settings - connections and choose wireless or wifi or network and have a look at what is actually happening in the network configurations. if you are really struggling still, try posting some screen shots of your network connection settings
sorry misread post
Just to end this topic.
I returned it to sadisk and they said it was the memmory function.
I couldn't get a new one form the store i bought it so I got my money back,
I now have a new one without the extra memory.
GreetZ
Nick
i read pages of threads on this forum, but im not getting nowhere fast!
I'll start at the begining, mda t-mobile original rom, working as it should, upgraded the rom several diff ones and not working, tryed the origainal rom and not working!
rom now on the mda,
ROM version 2.8.7.1WWE
radio version 01.13.10
protocal version 4.0.13.24
ExtROM version 2.8.7.101
ive intsalled DJVW WLAN 302.11g Activator 1.0.cab
Now the problem, when the wifis switched on it takes awhile to even detect the network, my old ipaq would be conected as soon as switched on?
when it does detect the network it trys to conect for about 2mins then gives up ( in same room as router )
it wont conect but i can see the mda has downloaded about 20kbs of info, but can get no further?
Am i missing something here?
Also where do you go to check you have the latest drivers, updates, newest rom etc
Thanks for taking the time to read this :wink:
Hello,
I have found that i am having similiar problems with Wifi after updating to the latest qtek 9100 ship ROM on my qtek 9100 device.
the device can "see" the WIFI but it will not/connot "use" it.
Ya same here. I can turn on the wifi but it doesnt connect anymore ! I know fopr sure that there are at least 4 wifi connections around me normally but I dont see any of them !
I had this problem but was able to fix it by giving my router my DNS settings (that I got from my ISP).
For some reason, certian routers will not serve the MDA with any sites unless it has the IP address of your ISP's DNS server.
This should take care of your problem.
If this doesn't work, go to your public library and see if you can get on their wifi. This will help you troubleshoot to see if there's actually a hardware problem.
Actually the problem i had is unusual in that i could connect to any open WIFI zone aswell as our work and home one, BUT it will not carry any traffic AT ALL. Only uses GPRS NO wifi.
I actually hard reset the device yesterday and ensured that Push email was switched off - WIFI is functioning fine now.
There is still one problem. When i cannot the device to my PC for an active sync. It will sync with the PC but throw an error when trying to sync with exchange server via the WIFI.
The error on the PC active sync is
"The server could not be reached. This can be caused by temporary network conditions
SUpport code:85002003"
It also throws an error on the device.
This is a right pain and did not happen on the previous version of the ROM. It means i have to do a seperate exchange server sync when disconnected from the PC. ANyone have ideas on how to fix this.
Incidently, another thing I have noticed with the NEw ROM is that contact lookup is noticeably slower - sometimes I have to wait for a few seconds
before the contact i am searching for actually comes up. This is in comparison to the immediate results of searches in my old ROM.
Jass
right ive reload a rom, and the wifi works, then after adding each of my aplications, ive tested the wifi conection, i found wififofum being the problem.
now i know the developer of wififofum has an wizard himself , that runs this aplication no problems, ut on mine it seems to just freeze the wifi, giving a rssi signal of 90 no matter how close or far im from the source?
http://img.photobucket.com/albums/v12/XRfil/mdawifi.jpg
hello all,
problem 1:
recently my exec has been dropping calls just as they connect. signal seems to jump up and down quite frequently and i'm not receiving some messages from abroad and some messages sent abroad don't make it to the receiver either.
that last issue may be a network issue as it seems to only happen randomly but is getting worse.
would a hard reset help much or is something else wrong here?
any insight would be much appreciated.
problem 2:
i want to disable or remove the voice command application that comes built in the exec (cybertronics?), i don't use it but it locks up the phone on odd occasions.
anyway to remove it without some extensive tinkering.
problem 3:
i remember a friend used to be able to connect his ipaq to his pc then run msn messenger on the ipaq (whilst cradled). is this possible with the exec as it doesn't seem to get a good wifi signal unless i'm right next to the wifi router.
i would have had a 4th problem but i just got AS working finally and jeyo mobile companion to go with it Very Happy
again, any help with any of these problems would be much appreciated.
regards,
haji.
having the same problem with signal. If i was in a location with no signal and i move to a location with good signal, the phone does not seem to detect this change. I have to reset the phone for it to get signal. so disapointed.... just sharing, sorry, ive got no solution.
For problem 3:
If you right click on ActiveSync icon in your system tray (version 4.2 not sure where the option i is on older versions) and choose "Connection Settings..." then there is an option which says:
"This computer is connected to:" and my copy was defaulted to "My work network", changing this to "The Internet" allows me to browse the internet using my computers internet on my XDA Exec.
I think this is what your friend would have been doing.
Regards
G
thanks gquipster! i'll try that out.
raffy, i've switched the phone over from 'auto' to gsm, that seems to have improved signals and i don't lose txts anymore. when set to auto it keeps trying to find the best 3g connection (i think).
if you don't need the 3g connection then try this:
start > settings > phone > band tab > change network type box from 'auto' to 'gsm'
i hope that helps a bit mate.
still got problem 2 to go then, any takers?
Hello,
I just bought a Leo. My provider is Vodafone IT.
From the very first moment, while WiFi is present in my house, the phone tried to connect to Internet via UMTS. It does so often when Wifi is temporarily unavailable.
After my old Glofiish M800, one year ago, made me spend 3€ for two consecutive connections for the duration of a half second each (1.50€ on connection then) I requested Vodafone to completely disable Internet access for my SIM card. All I did then was to connect the PDA to USB cable and SPB Weather immediately tried to update weather without even waiting for Net via ActiveSync to become available in a few seconds.
With Leo, I also deleted all network access points from configuration, set all profiles to Office Network and unchecked (my ROM is Italian) "This connection has Internet access" "Questa connessione dispone di accesso a Internet".
What occurs now is that often, but really OFTEN, even during the night, especially when I'm on the road and I'm not interested in Facebook, YouTube or weather, the phone turns on and two popup appear:
One as a notification "Called: " (before deleting AP "Called: web.omnitel.it" "Chiamata effettuata: web.omnitel.it"). The other as error message about problems with GPRS.
I also have to pay great attention to the second popup. Once, but fortunately not today, it went over the lock screen and I was unable to unlock it as the slider was below the popup. I was also unable to close the popup as the screen was locked so I had to soft-reset.
I only installed TomTom and Core Player for now.
I DON'T WANT TO PAY VODAFONE LOTS OF MONEY FOR UMTS ACCESS WITHOUT MY CONSENT, NOR SIGN UP FOR FLAT PLANS AS I HAVE WIRELESS ACCESS IN EVERY PLACE I USUALLY GO!!!
Can somebody help me tell Leo to NEVER TRY to use UMTS? I had to agree with Vodafone that I would have been unable to even send MMSs and perform videocalls until I restore UMTS, but I can't spend this huge money for the sake of weather and for greedy (it's the right word) software that just want to connect to the Internet whenever THEY want (ie. Windows Vista/7 does Windows Update only when Internet is detected, it never tries to connect until you do manually).
Thank you. Please anser me ASAP. If I don't find a solution, I will return the PDA to the seller (it's a great PDA, I wouldn't like to)
settings menu all settings connections connections advanced tab select networks change the top drop down to "my work network"
hope it helps!
Hi, I followed what you suggested and, in order to test faster, I tried to manually update weather from HTC Sense.
First of all, even if I uncheck the Internet access checbox from Office Network ("My work network" you mentioned), I always see it comes back again. I found that "ISP settings" only shows two tabs, and no Internet/proxy checkbox, so I also tested selecting this connection.
I also entered "*" as list of intranet addresses.
Every time I try to update weather, for all of these tests, I see the 3G arrows on top of notification bar flashing for a couple of seconds and the same exact alerts
Does your phone always connect to 3G?
[EDIT] I also tested http://www.htc.com/au/faqs.aspx?p_id=297&cat=264&id=118112, no result. But actually the help page says it clearly: it's normal that the phone will notice errors.
Is there any registry tweak or what?
Hello,
To solve your problem, go to the redfrogfish website, google to find the link. Download and install the Data Controller cab.This enables you to turn on/off the data connection function of the HD2
(I wanted to give you the link, but I am a new user and not allowed to do so)
Good Luck
djechelon said:
Hi, I followed what you suggested and, in order to test faster, I tried to manually update weather from HTC Sense.
First of all, even if I uncheck the Internet access checbox from Office Network ("My work network" you mentioned), I always see it comes back again. I found that "ISP settings" only shows two tabs, and no Internet/proxy checkbox, so I also tested selecting this connection.
I also entered "*" as list of intranet addresses.
Click to expand...
Click to collapse
I think you are going further into the settings than i need to.
settings - menu - all settings - connections - connections - switch to advanced tab - click 'select networks'
See my image 1 - setting the top dropdown to 'my work network' (or 'the internet', it gets called slightly diff thing depending on your setup, ,)) means it will look for whatever active connection is available and use that.
I also have a commmanager that has seperate on/off toggles for 3g and data.(see pic 2) So, if i turn off data connection, but leave 3g on, even though i have 3g (well, H) showing available on the top bar, if i go to update the weather it comes up with 'connection error'. If i start opera, it fails, etc etc.
Back into comm manager., turn back on the data toggle, everything works again.
If i turn off 3g, and leave data off, I get the same results.
paulmor said:
Hello,
To solve your problem, go to the redfrogfish website, google to find the link. Download and install the Data Controller cab.This enables you to turn on/off the data connection function of the HD2
(I wanted to give you the link, but I am a new user and not allowed to do so)
Good Luck
Click to expand...
Click to collapse
Thank you!
It did solve my problem
Here is the link you couldn't post, as it can be useful to the community:
http://redfrogfish.com/data-controller/
Thanks for the link, had a same problem which is solved now running this program.
Non branded hd2 on stock wwe 1.66 rom on t-mobiles network. For some strange reason I can connect to Marketplace via t-mobile but not through my home wifi, on wifi it says unable to connect to server, pls check your connection (the that it has encountered a serious problem), but my connection is fine as I can surf via wifi no problem. I uninstalled marketplace, soft reset, reinstalled, still ith problem persists, anyone else have this?
BUMP
some mobile programs require a cellular data connection to work properly. I'm guessing marketplace is one of them.
On second thought, looks like I can access Microsoft Marketplace on wifi. Are you sure that your wifi is working and doesn't require going through an approval process? (Some wifi's have a home page that you have to agree to terms on before you can access)
I had the same problem with Active sync with a cable I could surf the internet but couldn’t access market place downloads (Marketplace could not cannot connect to a server) so I disconnected and just connected to the modem Wi-Fi and no problem with Market Place all downloaded.
Strange
Had this issue myself with T-Mobile,
After months of searching it would appear that the problem was that Marketplace requries and authentication code and at some point when using the phone this was switched off.
From what I read the person didnt know how to change it within the phone but could view that it was turned off, they put on a new ROM and Marketplace flew into action.
I followed this and also slapped on a new ROM..... has worked for me and am using Marketplace to the best of its abilities.
Basic answer....flash a new ROM!