dhd stuck at htc logo after flashing ARHD6.1.5 - Desire HD General

hey guys
i flashed ARHD 6.1.5 to my dhd
i followed every step... but after reboot my dhd has been stuck at the start up htc logo.. only thing i can do is to pull out my battery and put it in again and start the bootloader. (reflashed the rom a few times, but no changes)
before i flashed arhd i made a backup of my former rom with clockworkmod recovery... now my recovery seems to be 4ext.
can i flash without any problem my backup with the 4exp recovery?
greetings
duluu

Did you do a superwipe before you flashed it?

noisy_lightning said:
Did you do a superwipe before you flashed it?
Click to expand...
Click to collapse
yes i did... first ive installed the super wipe.zip and after this ive installed the arhd zip

maybe the zip wasn't correctly downloaded.. try downloading again...
and go ahead recover your previous rom..not sure but i think it should work in 4ext no prob!

dhussa said:
maybe the zip wasn't correctly downloaded.. try downloading again...
and go ahead recover your previous rom..not sure but i think it should work in 4ext no prob!
Click to expand...
Click to collapse
the problem is clockworkmod didnt make a .zip... theres a image some .ext3 data

Backups in CWM aren't saved as zips. Just go ahead and select backup restore from the menu and then restore from the next menu. You should see your backup there to select. 4ext is very similar to CWM so there will be no problems.
Sent from my HTC Desire HD using XDA App

ok now its workin fine thx

Related

Bad flash with 32B HTC Magic

Hello,
I've flashed the Ginger Yoshi 5.1 on my phone but I didn't like it and wanted to switch back to RC4.
I tried restoring my RC4 Nandroid backup via Amon Ra's recovery but it failed with the following message: "could not do nandroid-mobile.sh" (or something like that).
I decided then to wipe the system and the cache and do a clean flash of the RC4.
Unfortunately, I'm stuck in the splash screen.
I have the latest radio and the unlocked xxx.xxx0013d SPL.
I can access to fastboot.
Is there a way to boot through Amon Ra's Recovery ?
Thank you guys
Never mind, I found the solution.
You can boot into Recovery mode while pressing HOME + OFF
Reflashing right now !
Whipe
Hey maybe its smart to do a superwhipe i do the superwhipe, you can download en read more about it here: http://forum.xda-developers.com/showthread.php?t=834812
it works for me just put the config and the superwipe in the root of youre sd, and flash the superwipe twice, and than youre rc5 gingerrom.
I'm pretty new to this sort of phone's i got my 32b like 3 days
Hope this could help ya...
Thank you for your reply,
Anyway, it's working fine with another wipe. But I'll download Ohsaka's Superwipe if the problem comes back...
Yet basically I wanted to restore my nandroid backup. How can I do this without having a fail ? I have renamed the backup, but I'm sure it's not corrupted...
Thanks !
Llywelyn said:
Thank you for your reply,
Anyway, it's working fine with another wipe. But I'll download Ohsaka's Superwipe if the problem comes back...
Yet basically I wanted to restore my nandroid backup. How can I do this without having a fail ? I have renamed the backup, but I'm sure it's not corrupted...
Thanks !
Click to expand...
Click to collapse
It probably doesn't like what you renamed it to. Try renaming it again to something like "AAA".
Sent from my LG-P500 using Tapatalk
the way i fixed this problem was i did a full wipe rebooted recovery and loaded my backup fine no more error lol
hope it helps

[Q] Evo stuck at load screen.

So, I'm a bit new around here and to rooting and flashing roms. I recently have been flashing rooms directly from rom manager. Everything was fine for weeks until I recentely tried flashing a rom by RVU. Now I'm stuck in the stock evo 4 g load screen and it keeps loading over and over. Any suggestions ? Is there away back into the boot loader ?
Turrubiates said:
So, I'm a bit new around here and to rooting and flashing roms. I recently have been flashing rooms directly from rom manager. Everything was fine for weeks until I recentely tried flashing a rom by RVU. Now I'm stuck in the stock evo 4 g load screen and it keeps loading over and over. Any suggestions ? Is there away back into the boot loader ?
Click to expand...
Click to collapse
To get back to the bootloader, you'd need to pull the battery (won't hurt anything) and put it back in. Then hold the power button and volume down. That will get you to the bootloader
What do you mean you tried flashing a rom by RVU? I'm confused. RUU is rom utility update, or rom update utility, or something ike that. But if you ran an RUU it would put you back to completely stock.
If I were you, and in your situation, I'd pull the battery, boot to bootloader, and see if you can still get to your recovery. If you can, I'd try wiping everything then either restoring a nandroid backup if you have one, or a fresh install of a ROM. If you don't have recovery, post back and we'll see what needs to happen to get you back up again.
Well, the rom I flashed was created by team RVU....at least that's what it said. So, I made it as far as recovery. But by wipe you mean a wipe back to stock? I'm in as far as my clockwork mod recovery screen. Kinda lost now !!
Turrubiates said:
Well, the rom I flashed was created by team RVU....at least that's what it said. So, I made it as far as recovery. But by wipe you mean a wipe back to stock? I'm in as far as my clockwork mod recovery screen. Kinda lost now !!
Click to expand...
Click to collapse
Okay I gotchya now, although I don't think I've been informed of RVU before, I'll have to check it out. Anyways, thats good that you can still get to recovery. So you have never used it before? Just did everything from ROM manager before huh? I'm not familiar with clockwork recovery, as I use Amon, I'm trying to remember the little differences. First, you don't have any nandroid backups do you? Prob not if you're not familiar with clockwork and had never created a nandroid backup before! I'm not sure if backups made with ROM manager can be restored using CWM, doubtful though. So by wipe, I mean wipe data/factory reset, wipe cache, and wipe davlik cache. You will need to have a ROM on your sd card, so that you can install it from recovery. In order to wipe the dalvik cache using clockwork, i believe it is under the advanced section. Not sure though. Once you have everything wiped, and the ROM of your choice on the main directory of your sd card, choose 'flash zip from sd card' or 'install zip from sd card" or something to that nature, then find the ROM and flash it. If all goes well, you should be able to boot up after that. If you do indeed happen to have a nandroid backup, choose to restore that.
Yup, everything I've done has been through rom manager. Anywho, I peeked around inside some files. Inside my install zip from sd. I found a file labeled nandroid. Could that be the backup that your referring too ? If so, would i still have to wipe my phone ?
Turrubiates said:
Yup, everything I've done has been through rom manager. Anywho, I peeked around inside some files. Inside my install zip from sd. I found a file labeled nandroid. Could that be the backup that your referring too ? If so, would i still have to wipe my phone ?
Click to expand...
Click to collapse
Nandroid folder is for amon RA backups. Clockwork backups are in the clockwork/backup folder.
Have you backed up your previous install? If so wipe all factory reset then restore a backup. Otherwise wipe all and flash a new rom.
This is why you do research and learn how to properly use your phone and any custom recovery before you reach this step. This is why manufacturers have crappy warranty policies because people ruin their phones by being stupid.
Sent from my PC36100 using XDA App
Rem3Dy said:
Nandroid folder is for amon RA backups. Clockwork backups are in the clockwork/backup folder.
Have you backed up your previous install? If so wipe all factory reset then restore a backup. Otherwise wipe all and flash a new rom.
This is why you do research and learn how to properly use your phone and any custom recovery before you reach this step. This is why manufacturers have crappy warranty policies because people ruin their phones by being stupid.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thank for lending a hand. Instead of trial and error, I simply started a thread. Oh, and thanks for reminding me I'm stupid!!!

CWM Problems

UPDATE: To fix 3.0.2.4 from not formatting /system
Open rom manager and select settings, and check erase recovery. hit menu again and select clear cache, then flash 3.0.2.4 again.
now if your in recovery and you cant boot back up to use rom manager, use the file below. It will allow you to restore your backup then once booted back up use the method above to fix 3.0.2.4.
The reason im leaving custom over 3.0.2.4 is bc i know fastboot flash with this one will allow you to restore without wiping recovery or clear cache or anything else.
http://www.mediafire.com/file/b8ejhqbf3tgnsoe/recovery.img - this is CMW 3.0.1.4 just altered for installing zips. linking for people needing a recover img to boot up
To install:
1. If in recovery, open ur terminal on ur pc and type adb reboot boatloader
2. Once in bootloader it will load fast boot and say fastboot usb in red
3. cd to the folder with fastboot.exe and also place recover.img in that folder
4. then enter fastboot flash recovery recovery.img
5. adb reboot recovery
6. restore your backup and boot up
RafficaX said:
Little FYI for all, cwm recovery wont format system on a restore. made a backup, tried a flash and went to restore and it fails formatting system.
So be careful with flashing and all bc yo may not be able to restore currently with cwm.
UPDATE: format system in menu also fails! be careful bc you pretty much cant restore or flash atm!
Click to expand...
Click to collapse
Oh how I miss Amon_Ra
jlevy73 said:
Oh how I miss Amon_Ra
Click to expand...
Click to collapse
im really hoping Amon_Ra does do his recovery on T-Bolt. I like Rom Manager and its features but would rather loose features for stability and reliability on each use.
RafficaX said:
im really hoping Amon_Ra does do his recovery on T-Bolt. I like Rom Manager and its features but would rather loose features for stability and reliability on each use.
Click to expand...
Click to collapse
QFT
can't wait for amon-ra
raffica, what version of CWM worked for you?
MYxdaUSERNAME said:
raffica, what version of CWM worked for you?
Click to expand...
Click to collapse
A custom compiled one 3.0.1.4, working on porting The Ultimate Droid to T-bolt so blackdroid also compiled cwm to make sure it would install the zip but has working restore. i messaged koush on cwm twitter about the issue so hopefully he fixes it quickly. only problem is the one im running you need to flash through fastboot with adb.
Thanks for the heads up I agree I always loved CWM on my N1 but it started giving me all kinds of grief for several different reasons so I finally went to Amon Ra.
RafficaX said:
A custom compiled one 3.0.1.4, working on porting The Ultimate Droid to T-bolt so blackdroid also compiled cwm to make sure it would install the zip but has working restore. i messaged koush on cwm twitter about the issue so hopefully he fixes it quickly. only problem is the one im running you need to flash through fastboot with adb.
Click to expand...
Click to collapse
Can you help me out and provide it because right now i cant even boot
RafficaX said:
A custom compiled one 3.0.1.4, working on porting The Ultimate Droid to T-bolt so blackdroid also compiled cwm to make sure it would install the zip but has working restore. i messaged koush on cwm twitter about the issue so hopefully he fixes it quickly. only problem is the one im running you need to flash through fastboot with adb.
Click to expand...
Click to collapse
isnt UD banned on these forums?
just curious dont flame me or anything! cuz when a Ud rom hit the inc the thread was deleted in minutes
superchilpil said:
isnt UD banned on these forums?
just curious dont flame me or anything! cuz when a Ud rom hit the inc the thread was deleted in minutes
Click to expand...
Click to collapse
yeah, if you go on their forums all they do is flame XDA left and right. But I find it funny since their roms take advancements from XDA developers and then they incorporate it into their roms...
nosympathy said:
yeah, if you go on their forums all they do is flame XDA left and right. But I find it funny since their roms take advancements from XDA developers and then they incorporate it into their roms...
Click to expand...
Click to collapse
See that's what I thought, but wasn't sure
Sent from my ADR6300 using XDA Premium App
Yes Clockwork 3.0.2.4 is borked on Thunderbolt. I've been helping people on AndIRC's thunderbolt channel all day. Install 3.0.2.2, it's given me no problems.
jgrimberg1979 said:
Can you help me out and provide it because right now i cant even boot
Click to expand...
Click to collapse
I ran into the same problem. I tried to do a restore and got stuck. I used an sd card reader and put the 3rd file from the root thread PG05IMG.zip on the root of my sd card. I then put the card back in. Rebooted into recovery holding the volume down and the power button. It reflashed the file automatically and I followed the steps from 7 on to regain root. Worked for me, but now I have to start over. Hopefully they will get CWM working again. I will be much more careful about what I delete from now on. I think I will freeze it in TiBackup first to make sure everything is still working correctly. Hope this helps.
lynseyw said:
I ran into the same problem. I tried to do a restore and got stuck. I used an sd card reader and put the 3rd file from the root thread PG05IMG.zip on the root of my sd card. I then put the card back in. Rebooted into recovery holding the volume down and the power button. It reflashed the file automatically
Click to expand...
Click to collapse
This is the exact procedure I used when the same thing happened on my N1
i added the recovery.img i used to OP with instructions for those stuck in recovery or bootloader.
jeffnucci said:
Yes Clockwork 3.0.2.4 is borked on Thunderbolt. I've been helping people on AndIRC's thunderbolt channel all day. Install 3.0.2.2, it's given me no problems.
Click to expand...
Click to collapse
Latest Rom manager is 3.0.1.3 sorry if I am missing something I am a bit of a clockwork noob.
Sent from my ADR6400L using XDA App
miketoasty said:
Latest Rom manager is 3.0.1.3 sorry if I am missing something I am a bit of a clockwork noob.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Newest Rom Manager is 3.0.1.3 but the newest ClockworkMod Recovery for the tbolt is 3.0.2.4
Under flash clockworkmod recovery it stats the current and latest recovery.
My battery died and am in the same position. Got an expensive paperweight at the moment. I'll try to get another battery today and give this a try. After fooling around with it last night, the computer wouldn't even recognize the phone. Ughh!
RafficaX said:
Newest Rom Manager is 3.0.1.3 but the newest ClockworkMod Recovery for the tbolt is 3.0.2.4
Under flash clockworkmod recovery it stats the current and latest recovery.
Click to expand...
Click to collapse
Good call just checked and 3.2 does wipe date and cache properly.
Sent from my ADR6400L using XDA App
miketoasty said:
Good call just checked and 3.2 does wipe date and cache properly.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Where did you get 3.2? 3.0.2 you mean?

[Q] Restoring clockoworkmod backup

I'm sorry in advance if it has been asked already.
Do I need to perform any wipes before restoring a backup? I'm currently on CM7.2 RC1 and made a backup of it and want to switch to Defy+ CM9 build for a while then go back to CM7.2. Last time I did it (restored CM7 backup after installing CM9) it just stuck on Boot logo and couldn't move on so I had to start from scratch (new installation). Any guides just mention clicking on restore and that's all. Thanks in advance for an answer!
Can anyone help me? I did as I wrote (switched for a while to CM9 GB build from CM7.2 FROYO) then wanted to restore CM7 backup, tried both with and without wipes (data, cache, dalvik) but it just gets stuck on boot logo and won't move on. What am I doing wrong?
You don't need to do a wipe for restoring a nandroid..
I assume you're using the same recovery with which you made the backup..
neo.ank said:
You don't need to do a wipe for restoring a nandroid..
I assume you're using the same recovery with which you made the backup..
Click to expand...
Click to collapse
Thanks for an answer! I made a backup with CM7 (froyo) recovery and was restoring with the one that was installed along with CM9 (gb). So that was the cause?
You flashed the CM9 ROM through recovery.. right??
ROM's do not change recovery.. Its the same for both..
MarcinRN said:
I'm sorry in advance if it has been asked already.
Do I need to perform any wipes before restoring a backup? I'm currently on CM7.2 RC1 and made a backup of it and want to switch to Defy+ CM9 build for a while then go back to CM7.2. Last time I did it (restored CM7 backup after installing CM9) it just stuck on Boot logo and couldn't move on so I had to start from scratch (new installation). Any guides just mention clicking on restore and that's all. Thanks in advance for an answer!
Click to expand...
Click to collapse
Why don't you try Dual Boot...
refer to the below mentionedlink:
http://forum.xda-developers.com/showthread.php?t=1364659
However, to install CM9 I'm not sure if someone uploaded itsnandroid backup. Please note that to use the backup and restore youcan only use a Nandroid backup as ROM.zip file can not be restored.
What I understand from your post is that you have CM9 rom in zipformat; if this is the case then you can only install it usingInstall from SD card option from Custom Recovery.
---------- Post added at 11:09 PM ---------- Previous post was at 11:09 PM ----------
neo.ank said:
You flashed the CM9 ROM through recovery.. right??
ROM's do not change recovery.. Its the same for both..
Click to expand...
Click to collapse
Wiping data removes Custom recovery. If the new ROM has aCustom recovery then only it appears otherwise we have to reinstallthe Custom recovery.
neo.ank said:
You flashed the CM9 ROM through recovery.. right??
ROM's do not change recovery.. Its the same for both..
Click to expand...
Click to collapse
Yes, i flashed CM9 through recovery.
Rajneeshgadge17 said:
Why don't you try Dual Boot...
refer to the below mentionedlink:
http://forum.xda-developers.com/showthread.php?t=1364659
However, to install CM9 I'm not sure if someone uploaded itsnandroid backup. Please note that to use the backup and restore youcan only use a Nandroid backup as ROM.zip file can not be restored.
What I understand from your post is that you have CM9 rom in zipformat; if this is the case then you can only install it usingInstall from SD card option from Custom Recovery.
Wiping data removes Custom recovery. If the new ROM has aCustom recovery then only it appears otherwise we have to reinstallthe Custom recovery.
Click to expand...
Click to collapse
I think you got me wrong. I was using CM 7.2 Froyo build and made a backup of it through recovery. Then I installed CM9 GB build (wiped data, installed rom, kernel, gapps) and have been using it for a while then I wanted to switch back to my CM7.2 backup (went to the recovery, choosed restore) and it said restoring was succesfull but when I rebooted it just stuck on bootlogo and couldn't move on. Any idea what am I doing wrong?
MarcinRN said:
Yes, i flashed CM9 through recovery.
I think you got me wrong. I was using CM 7.2 Froyo build and made a backup of it through recovery. Then I installed CM9 GB build (wiped data, installed rom, kernel, gapps) and have been using it for a while then I wanted to switch back to my CM7.2 backup (went to the recovery, choosed restore) and it said restoring was succesfull but when I rebooted it just stuck on bootlogo and couldn't move on. Any idea what am I doing wrong?
Click to expand...
Click to collapse
Technically, you haven't done anything wrong. What I've learnt from my experience and posts, this is one heck of a weird phone.
Might be a chance your backup is corrupted or incomplete (highly unlikely bt I've seen it in a device)
Or some other glitch which m nt sure of..
Sent from my MB526 using Tapatalk 2
Wiping data removes Custom recovery. If the new ROM has aCustom recovery then only it appears otherwise we have to reinstallthe Custom recovery.
Click to expand...
Click to collapse
Well as I said..this phone definitely acts senseless sometimes.. a data wipe in my case didn't remove the recovery or bootmenu.
Even reported it in the app thread..
Sent from my MB526 using Tapatalk 2
neo.ank said:
Technically, you haven't done anything wrong. What I've learnt from my experience and posts, this is one heck of a weird phone.
Might be a chance your backup is corrupted or incomplete (highly unlikely bt I've seen it in a device)
Or some other glitch which m nt sure of..
Click to expand...
Click to collapse
It was second time it failed to restore a backup I was trying to do the same a while ago and was unsuccesfull too. Seems like my phone is cursed
Thanks for trying anyway!
MarcinRN said:
Yes, i flashed CM9 through recovery.
I think you got me wrong. I was using CM 7.2 Froyo build and made a backup of it through recovery. Then I installed CM9 GB build (wiped data, installed rom, kernel, gapps) and have been using it for a while then I wanted to switch back to my CM7.2 backup (went to the recovery, choosed restore) and it said restoring was succesfull but when I rebooted it just stuck on bootlogo and couldn't move on. Any idea what am I doing wrong?
Click to expand...
Click to collapse
Now, I understand your issue.
Try using below mentioned steps:
1. Boot into latest/custom recovery;
2. Wipe data/cache;
3. Restore the complete Nandroid backup;
4. Now from advance wipe dalvik cache and battery logs;
5. Now reboot the phone.
Please use above mentioned steps and share the results.
Hope this helps!!
Also try to install latest clockwordmod backup.
check this website for more detail http://www.clockworkmod.com/
@MarcinRN
I think your problem is kernel related, if you switch to CM7 from CM9 with GB-Kernel you must restore the froyo-kernel for CM7.
RATTAR said:
@MarcinRN
I think your problem is kernel related, if you switch to CM7 from CM9 with GB-Kernel you must restore the froyo-kernel for CM7.
Click to expand...
Click to collapse
That's the problem. You can find the kernels on epsy's site. Flash the kernel and restore the nand (there are also options in advanced restore if it still doesn't work, don't know if you need them)
Sent from my MB525 using XDA
Thanks guys I'll try it next time. However, I read somewhere that backup contains kernel too, don't know how much true is in that.

Backups on Phillz Recovery

Im having 2 issues with phillys recovery n not sure wut im doin wrong. I did a backup and when I restored it gapps forceclosed and phone wouldnt let me do anything. Secondly ive tried doing he create custom rom. It flashs fine but wont pass bootloader s4 screen. Need help. Would love to be able to make a flashable rom with my ultra slim rom n possibly have my xposed tweets built in.
TeamBlaze
Got backup to work. But still unable to get custom rom aka update.zip to get past bootloader. Anyone kno how to fix this.
TeamBlaze
If you're talking about the update.zip made from Titanium, it is NOT a custom ROM.
It is simply a backup of your applications (and some settings) you can use to flash after flashing a ROM to 're-load' all your stuff.
If you get your current ROM configured the way you like it you can then create a nandroid to restore it later if that is what you want. And without any info on what version of Android you're on, what ROM you're on, or what version of the recovery you're on there is no way to tell you where to go from here.
leaderbuilder said:
If you're talking about the update.zip made from Titanium, it is NOT a custom ROM.
It is simply a backup of your applications (and some settings) you can use to flash after flashing a ROM to 're-load' all your stuff.
If you get your current ROM configured the way you like it you can then create a nandroid to restore it later if that is what you want. And without any info on what version of Android you're on, what ROM you're on, or what version of the recovery you're on there is no way to tell you where to go from here.
Click to expand...
Click to collapse
No. From philz touch recovery. In the custom backups you can selete create a custom rom from backup and I can't get tht to flash right after makin. Clean install n everything.
TeamBlaze
yotaking said:
No. From philz touch recovery. In the custom backups you can selete create a custom rom from backup and I can't get tht to flash right after makin. Clean install n everything.
TeamBlaze
Click to expand...
Click to collapse
Never tried that (make ROM from recovery in philz) myself.
I just make and restore loads of backups using Philz and TWRP. I consider a full backup (complete image(s) of all phone partitions) to be my ROM(s).
I would bet that with what you're doing that if, after you flash your custom made zip (and before rebooting) you stayed in recovery and then flashed (install zip) of the same recovery, rebooted back to recovery and flashed the kernel it may work.
Rebooting the recovery (or a battery pull) often clears out hangs.
Did you tried enabling se linux context from backup settings?
Sent from my GT-I9505 using xda app-developers app
do you have 4.3 compatability checked off?
same issue
yotaking said:
Im having 2 issues with phillys recovery n not sure wut im doin wrong. I did a backup and when I restored it gapps forceclosed and phone wouldnt let me do anything. Secondly ive tried doing he create custom rom. It flashs fine but wont pass bootloader s4 screen. Need help. Would love to be able to make a flashable rom with my ultra slim rom n possibly have my xposed tweets built in.
TeamBlaze
Click to expand...
Click to collapse
I had similair issues with philz. idid a very improtnact nandroid backup and when iwent ot restore it didnt work. I definately like TWRp the best. Best UI and never any issues for me.
androidaddicted said:
I had similair issues with philz. idid a very improtnact nandroid backup and when iwent ot restore it didnt work. I definately like TWRp the best. Best UI and never any issues for me.
Click to expand...
Click to collapse
I like twrp as well but dnt wrk on 4.3
TeamBlaze
dewrust said:
do you have 4.3 compatability checked off?
Click to expand...
Click to collapse
Conito11 said:
Did you tried enabling se linux context from backup settings?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Imma look into these
TeamBlaze

Categories

Resources