Related
hi all. I have doubt regarding upgrading my tab; I have these details:
PDA: P1000XXJM6
PHONE: P1000XXJMX
CSC: P1000OXAJM6
I found a new official firmware ( P1000XXJMA ). Now is coming my questions: in order to not make any damage to my tab, what shall I do? I downloaded the new firmware in zip format and unpacked (is a tar archive) , I got Odin3 v1.7. What is exactly the procedure? can somebody to explain in few words what are the steps for upgrading? I am afraid, because last time trying to flash a new firmware (european) over the stock one (asia) i almost brick the tab. thanks in advance for any good advice !
already update the firmware; but i got this result. how ca i fix this?
problem solved !
Hi,
by problem solved you mean you got CSC and PDA back, matching JMA?
If so, how did you do it?
Thanks
I got my tab yesterday but only update via vies was xwjj7
Sent from my Galaxy TAB using XDA App
farahbolsey said:
Hi,
by problem solved you mean you got CSC and PDA back, matching JMA?
If so, how did you do it?
Thanks
Click to expand...
Click to collapse
1. reboot in recovery mode via ADB
2 wipe factory reset
3 reflash JMA via Odin without PIT and NO repartition
4 restart in recovery mode and there it will finish installation of CSC
and look:
nice, got my tab updated right
thanks Ovigt71
farahbolsey said:
nice, got my tab updated right
thanks Ovigt71
Click to expand...
Click to collapse
you're welcome, man!
How do you boot in recovery using ADB?
09CarreraS said:
How do you boot in recovery using ADB?
Click to expand...
Click to collapse
Method 1.
via Command (Start - Run - cmd )
"c:\cd android-sdk/platform-tols
c:\android-sdk/platform-tools/adb devices"
you'll see your device listed below
then you type
"adb reboot recovery"
Method 2. no ADB
when you restart the Tab pushing the power button, keep pressing the Volume up level ...and...wait
I hope it help!
doesn´t it always run into recovery screen by pressing volup and power together?
why you need to do the adb if you must press volup either?
i think the question was if you can reboot into recovery without touching the tab, just with a adb command....
my mistake! sorry
when I wrote 1. it means method 1 ,and 2. method 2
there are two different method to go in recovery mode
1 is via computer (no touch the tab)
2 is no ADB, only by pressing the tab buttons....i'll modify the post
Hello guys this is my first post and please consider me as a beginner.
I have a SAMSUNG GALAXY S3 international version. I believe the solution I will be posting will work for all types if they get the message "Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try again".
I downloaded the file attached to the post (insecure kernel).
Then with help of odin v3.04 the phone in download mode I installed the above insecure kernel. By doing this I got the firmware issue away then I put the phone to recovery mode by pressing the volume up button and menu button and power button and selected the option factory reset and wiped or deleted the entire data. Once that was done I was able to install the latest Jellybean 4.1 official release using odin and my phone is back to life. I am so happy. I belive it will work for you also..
Thanks.
another problem
subinbabu_1987 said:
Hello guys this is my first post and please consider me as a beginner.
I have a SAMSUNG GALAXY S3 international version. I believe the solution I will be posting will work for all types if they get the message "Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try again".
I downloaded the file attached to the post (insecure kernel).
Then with help of odin v3.04 the phone in download mode I installed the above insecure kernel. By doing this I got the firmware issue away then I put the phone to recovery mode by pressing the volume up button and menu button and power button and selected the option factory reset and wiped or deleted the entire data. Once that was done I was able to install the latest Jellybean 4.1 official release using odin and my phone is back to life. I am so happy. I belive it will work for you also..
Thanks.
Click to expand...
Click to collapse
Hi I was trying unfortunately to update my firmware to the latest one by using skies :S but something went wrong so I restarted my phone and found the same message " Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try again "
so I did as you said and performed all those actions above but The phone stuck on samsung open screen ... also when I connect it to my pc you know the only thing appeared the battery charging but even can't see the percentage of it .. or start the phone ... so what should I do please
tnkz dude
tnkz dude
subinbabu_1987 said:
Hello guys this is my first post and please consider me as a beginner.
I have a SAMSUNG GALAXY S3 international version. I believe the solution I will be posting will work for all types if they get the message "Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try again".
I downloaded the file attached to the post (insecure kernel).
Then with help of odin v3.04 the phone in download mode I installed the above insecure kernel. By doing this I got the firmware issue away then I put the phone to recovery mode by pressing the volume up button and menu button and power button and selected the option factory reset and wiped or deleted the entire data. Once that was done I was able to install the latest Jellybean 4.1 official release using odin and my phone is back to life. I am so happy. I belive it will work for you also..
Thanks.
Click to expand...
Click to collapse
Raymon2012 said:
Hi I was trying unfortunately to update my firmware to the latest one by using skies :S but something went wrong so I restarted my phone and found the same message " Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try again "
so I did as you said and performed all those actions above but The phone stuck on samsung open screen ... also when I connect it to my pc you know the only thing appeared the battery charging but even can't see the percentage of it .. or start the phone ... so what should I do please
Click to expand...
Click to collapse
Disconnect the USB, remove the battery, put it back and get into recovery and see if it gets into download mode. If you get the "recovery screen" again, connect to kies and try the emergency recovery. Irrespective of what happens, retry getting into download mode again after that. I had encountered the same problem during and update after around 62% was written to the phone and was able to get into download mode again.
Never use kies. Always use Odin, or Mobile Odin.
Sent from an electronic device.
sebarkh said:
Never use kies. Always use Odin, or Mobile Odin.
Sent from an electronic device.
Click to expand...
Click to collapse
Can someone help me in extracting the file downloaded by kies and create odin flashable files please. I know where the file downloaded by kies reside, 1 problem solved.
hackworks said:
Can someone help me in extracting the file downloaded by kies and create odin flashable files please. I know where the file downloaded by kies reside, 1 problem solved.
Click to expand...
Click to collapse
Use CHECKFUS to download and flash the tar via Odin .
jje
it worked..
thank you very much mate!!
same problem
Raymon2012 said:
Hi I was trying unfortunately to update my firmware to the latest one by using skies :S but something went wrong so I restarted my phone and found the same message " Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try again "
so I did as you said and performed all those actions above but The phone stuck on samsung open screen ... also when I connect it to my pc you know the only thing appeared the battery charging but even can't see the percentage of it .. or start the phone ... so what should I do please
Click to expand...
Click to collapse
hey raymon2012, did you ever fix this problem, i'm encountered the very same issue. plz help
ray484 said:
hey raymon2012, did you ever fix this problem, i'm encountered the very same issue. plz help
Click to expand...
Click to collapse
TRY
http://forum.xda-developers.com/showthread.php?t=1978840
subinbabu_1987 said:
Hello guys this is my first post and please consider me as a beginner.
I have a SAMSUNG GALAXY S3 international version. I believe the solution I will be posting will work for all types if they get the message "Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try again".
I downloaded the file attached to the post (insecure kernel).
Then with help of odin v3.04 the phone in download mode I installed the above insecure kernel. By doing this I got the firmware issue away then I put the phone to recovery mode by pressing the volume up button and menu button and power button and selected the option factory reset and wiped or deleted the entire data. Once that was done I was able to install the latest Jellybean 4.1 official release using odin and my phone is back to life. I am so happy. I belive it will work for you also..
Thanks.
Click to expand...
Click to collapse
thank you so much this is a good information
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
rodyrach said:
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
Click to expand...
Click to collapse
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
devilsdouble said:
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
Click to expand...
Click to collapse
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
rodyrach said:
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
Click to expand...
Click to collapse
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
devilsdouble said:
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
Click to expand...
Click to collapse
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
hi, your problems are resolved?
devilsdouble said:
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
Click to expand...
Click to collapse
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
rodyrach said:
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Click to expand...
Click to collapse
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
cryostasis25 said:
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
Click to expand...
Click to collapse
Hi i have already use pit file with stock rom via odin. same result. bootloop at the logo.
rodyrach said:
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
Click to expand...
Click to collapse
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
devilsdouble said:
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
Click to expand...
Click to collapse
My phone dont show up on ADB.
rodyrach said:
My phone dont show up on ADB.
Click to expand...
Click to collapse
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
devilsdouble said:
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
Click to expand...
Click to collapse
My problem not solved
rodyrach said:
My problem not solved
Click to expand...
Click to collapse
Flash official lollipop poland done! still bootloop at "samsung galaxy note 3 sm-n9005".
can't access to recovery mode but download mode still working!
before to sleep i left the charger connected to the phone still bootloop until the morning and BANG i waked up saw lollipop samsung logo and blue led!
screen stucked at lollipop samsung logo!
i turned off the phone left in charge ( normal charge with animation in green battery, thing that did not before because as soon as I connected the charger to the phone it tried to boot and reboot all time after e few seconds with 2 vibrations) and gone to work.
go back home battery charged at 100%, tried to boot in recovery mode and it working!
i performed a wipe data factory reset and wipe cache partition and BANG my note 3 booted normally.
done a few hours and it works very well.
Thanks to all for your supports.
Really weird i don't understand whats happened during the night.
But im so glad .
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
You must use ODIN
go to download mode then flash your rom
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
i have same problem after i install app from google play try to flash rom can,t find 1 that work
plz help.
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
AmGaD-SaLaH said:
You must use ODIN
go to download mode then flash your rom
Click to expand...
Click to collapse
Thanks dude for the suggestion.
me 2
Me 2, I want to unbrick it how to download my firmware?
Galaxy Grand Prime SM-G530/H/DV is Not accepting ODIN connection
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
maq66 said:
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
Click to expand...
Click to collapse
Seems like the EFS partition is broken (IMEI Invalid)
If You don't have any backups done by custom recovery, well... You're probably done.
I am having a similar problem. After enabling KNOX, which I thought was just another antivirus, my phone rebooted, and just got stuck. It would go to the boot page, with the name, and then it would act like it was gonna go to my home screen, but the screen would go black and it would start over. I cleared the cache and factory wiped it, but still no luck. I didn't enable usb debugging, and from what I know there is no way to enable it. I need it to use odin to flash a rom and start over. any suggestions?
dineshjumani said:
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
Click to expand...
Click to collapse
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
lucas13garcia said:
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
Click to expand...
Click to collapse
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
lucas13garcia said:
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
Click to expand...
Click to collapse
Well Windows 10 64bit has been creating problems for many many people in the forum and I have seen people running vm and win 7 for the best results. And something very important I must say is that, most of the new computers do have USB 2.0 ports but they are limited in number, so you should find one on ur PC, to us it specifically for phone tweaking softwares. I would suggest you find another PC or laptop around,
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
Without recovery or Download mode, you'll need to take it to someone with a black box or jtag.
If you can access a working phone of your same model, you can boot download mode from sd
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
Did you try wiping cache and what is your model?
waleeds1 said:
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
Did you try wiping cache and what is your model?
Click to expand...
Click to collapse
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
mrunank said:
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
Click to expand...
Click to collapse
What about download mode? Btw it should not go to logo it should go to recovery after bootimage. You should hold down power home and volume down untill download mode comes or power home and volume up untill recovery menu comes
Please help me I was trying to install a new rom and accidently i wiped internal storage and the new rom i was trying to install was gone now it stucked at LG logo I cant enter the download mode tho but i dont know maybe stucked also at firmware update.
I just bought the phone a week ago. Any help would appreciated.
kariemmka said:
I cant enter the download mode tho but i dont know maybe stucked also at firmware update.
Click to expand...
Click to collapse
You CAN, or CANT enter download mode?
If you can, follow the LG G2 Back to Stock Guide.