Just wanted to report, on CM nightly #256, CRT on/off animation works.
Note: To get it fully working, flash Roboto font pack (don't know why, but it works).
Work, as in constantly on and off working now. Instead of casually flicking when the phone wishes?
Constantly working for me.
Sent from my HTC Wildfire using xda premium
Worked after flashing font package
It was working for me after flashing ICS roboto font package.
One thing I wanna say that it's completely a random process sometime it works and sometimes its not. Anyways luck is also a part of it
Shiv Prajapati said:
It was working for me after flashing ICS roboto font package.
One thing I wanna say that it's completely a random process sometime it works and sometimes its not. Anyways luck is also a part of it
Click to expand...
Click to collapse
yea the same for me, atm its working
Not working for me
Only worked once for half a month
how to enable it? or is it automaticly on?
Winamp_zg said:
how to enable it? or is it automaticly on?
Click to expand...
Click to collapse
Settings -> CM Settings -> Display -> tick Screen-Off animation
Smokzye
smokzye said:
Settings -> CM Settings -> Display -> tick Screen-Off animation
Smokzye
Click to expand...
Click to collapse
Hvala
still nothing, screen turns off and on normal, like before...
EDIT: after 2 reboots it's working but little bit slow
Winamp_zg said:
Hvala
still nothing, screen turns off and on normal, like before...
EDIT: after 2 reboots it's working but little bit slow
Click to expand...
Click to collapse
Da, laga malo, ali radi!
Smokzye
If it doesn't work, try restarting your phone a couple of times.
(Works both ways, as in it may stop doing the animation if you reboot the phone)
Screen off and lock an excellent app in market will give u a crt animation but not as good as default gingerbread one
Sent from my HTC Wildfire using XDA App
Related
Hey I am using cm7 Stable version...I love it but the screen-of animation dose not work for me....witch is the most favorite feature in CM7...any Solution??
No, it was removed from the build quite a while ago, and from what I've read, I don't think it'll be coming back any time soon! Sorry.
But for other device it steel running...and also I have an option in my CM7 setting>Display Setting>screen-off animation on I ticked on this option but nothing happens...
itsmerabbi said:
But for other device it steel running...and also I have an option in my CM7 setting>Display Setting>screen-off animation on I ticked on this option but nothing happens...
Click to expand...
Click to collapse
its disabled for wildfire
try this, http://www.appbrain.com/app/screen-off-and-lock-(donate)/com.katecca.screenofflockdonate
more info here http://forum.xda-developers.com/showthread.php?t=1038562
It was laggy as hell anyway...
itsmerabbi said:
Hey I am using cm7 Stable version...I love it but the screen-of animation dose not work for me....witch is the most favorite feature in CM7...any Solution??
Click to expand...
Click to collapse
Go to spareparts application and make sure that the window animation and the transition animation checked at "normal"
It wont work still then. Its disabled.
However, a new patch has been submitted to re-enable it, it should be there on the future nightlies.
NOTE: Do Not Apply this mod for Alpha 3, it screws up the status bar. You have been warned. I will see if i can recompile it for Alpha 3, makes it tougher without sources.
Initially i did this mod for my I9000 which was running CM7.1 and i was only seeing carrier numbers instead of names. I have ported this to CM7.1 for HP touchpad. Flash this file in cwm recovery.
When booted up you should see an additional setting in cyanogenmod settings called CustomSettings, tap that to open custom carrier text, tap that and enter whatever you want to show on the lockscreen and notification bar. Press done.
Install the attached notificationrestart.apk and open it, give it root access, press restart and wait for the notification bar to restart. This is to avoid restart of the tablet before you see the new settings apply. Voila, you should see what you put in the custom name. Have fun and hit the thanks button if you like it. Cheers.
If for some reason your status bar looks wonky after a while use this to get back to original stuff. I changed the dpi to 182 using nitrality app and the wonkiness seems to be gone. I am using iKandee theme from market.
Original Mod for I9000 credits
doixanh ( for his ginger DX settings)
ngiordano ( for his helping hand with androiding)
Screenshots of what settings should look like.
I'll give this a shot. Is there an option (perhaps in the future) to place a .png file where the carrier text is? Similar to MIUI? Just curious.
Ok. dl'ing now. I'll report back.
EDIT: It works! My only issues
A) The notificationrestart.apk installed, but didn't seem to do anything. I didn't notice the change until after I rebooted the device.
B) I'm now seeing the 3G bar in the corner (see the image). Is there a way to keep the custom text, but not show the signal bars?
jpmi23 said:
I'll give this a shot. Is there an option (perhaps in the future) to place a .png file where the carrier text is? Similar to MIUI? Just curious.
Ok. dl'ing now. I'll report back.
Click to expand...
Click to collapse
May be. I will look into it at a later time, no promises. If the status bar gets wonky, set dpi to 182 and see if it happens. For me its perfect at 182 (which is what my phone is it)
Sent from my HP Touchpad using Tapatalk
jpmi23 said:
I'll give this a shot. Is there an option (perhaps in the future) to place a .png file where the carrier text is? Similar to MIUI? Just curious.
Ok. dl'ing now. I'll report back.
EDIT: It works! My only issues
A) The notificationrestart.apk installed, but didn't seem to do anything. I didn't notice the change until after I rebooted the device.
B) I'm now seeing the 3G bar in the corner (see the image). Is there a way to keep the custom text, but not show the signal bars?
Click to expand...
Click to collapse
For now no. once cm team publishes source I will recompile with that.that well solve these issues. Did you run the notification restart app? I had to wipe data of that apk using titanium backup and it worked fine after that. 182 dpi works fine. Anything less than that status bar gets wonky.
Sent from my HP Touchpad
krarvind said:
For now no. once cm team publishes source I will recompile with that.that well solve these issues. Did you run the notification restart app? I had to wipe data of that apk using titanium backup and it worked fine after that. 182 dpi works fine. Anything less than that status bar gets wonky.
Sent from my HP Touchpad
Click to expand...
Click to collapse
I attempted, but it did not run. Did not ask for root privileges either. I simply rebooted and it showed the text change.
jpmi23 said:
I attempted, but it did not run. Did not ask for root privileges either. I simply rebooted and it showed the text change.
Click to expand...
Click to collapse
Ya, once you wipe data using titanium back up it will ask for root privileges. Not sure why. 182 and higher dpi works fine.
Sent from my HP Touchpad
jpmi23 said:
I'll give this a shot. Is there an option (perhaps in the future) to place a .png file where the carrier text is? Similar to MIUI? Just curious.
Ok. dl'ing now. I'll report back.
EDIT: It works! My only issues
A) The notificationrestart.apk installed, but didn't seem to do anything. I didn't notice the change until after I rebooted the device.
B) I'm now seeing the 3G bar in the corner (see the image). Is there a way to keep the custom text, but not show the signal bars?
Click to expand...
Click to collapse
is that screen shot from your touchpad? if so what theme is that is looks nice!
Your theme looks great, I also would like to know what it is ?
ks2hot4u said:
Your theme looks great, I also would like to know what it is ?
Click to expand...
Click to collapse
screen shots are from my phone which runs Insanity Rom and its theme.
The screenshot that I posted is in fact my TP. I'm using the Transformer theme from HERE. It ties in with CM's ThemeChanger. It'll notify you that it's not meant for your device, just do it. As you can see it works fine.
jpmi23 said:
The screenshot that I posted is in fact my TP. I'm using the Transformer theme from HERE. It ties in with CM's ThemeChanger. It'll notify you that it's not meant for your device, just do it. As you can see it works fine.
Click to expand...
Click to collapse
thank u sir!
@krarvind
thanks for this! no issues on my TP so far.
as a little test i flashed this to my T-MoUS HD2 Leo since i could never find a way to set a custom carrier label.
it works great on there as well - with one side effect on the lockscreen. any chance this can be fixed? i just did it on a whim since it's cm7 i figured it couldn't do to much damage. no problems on the status bar, just the lock screen.
i know it wasn't built for this device so don't answer if you don't want to
the top near my label shows a graphic from i don't know where.
pxldtz said:
@krarvind
thanks for this! no issues on my TP so far.
as a little test i flashed this to my T-MoUS HD2 Leo since i could never find a way to set a custom carrier label.
it works great on there as well - with one side effect on the lockscreen. any chance this can be fixed? i just did it on a whim since it's cm7 i figured it couldn't do to much damage. no problems on the status bar, just the lock screen.
i know it wasn't built for this device so don't answer if you don't want to
the top near my label shows a graphic from i don't know where.
Click to expand...
Click to collapse
I have no idea where that comes from and i don't have your device, so i can't really fix it i think. if you want to roll back, all you need to do is open up my zip files and replace the app and framework files with the ones from the rom for your phone ( not from your phone as it has mine now).
Cheers
For some reason whenever i try to boot a custom carrier label my Touchpad never boots up... it just hangs on the cyanogen mod boot animation and requires a hard reset... followed the instructions perfectly. anyone have the same issue?
after some messing around i got it to boot up for me. then the notification bar went "wonky" used the nitrality app to adjust the dpi. works fine. what is the default dpi again?....
KingKwentyne said:
For some reason whenever i try to boot a custom carrier label my Touchpad never boots up... it just hangs on the cyanogen mod boot animation and requires a hard reset... followed the instructions perfectly. anyone have the same issue?
after some messing around i got it to boot up for me. then the notification bar went "wonky" used the nitrality app to adjust the dpi. works fine. what is the default dpi again?....
Click to expand...
Click to collapse
No idea why you have these issues. dpi is 182. Anything above that works fine. Remember I don't have the sources to compile it for touchpad, so I did my best to get it
working
Sent from my HP Touchpad using xda premium
Screwed up my notification bar, the resolution is way off and battery percentage is gone. Cyanogenmod won't let me add it either?? The OriginalLabel.zip doesn't have battery percentage either for some reason. Guess I'll do a restore in Recovery. Thanks for trying though.
Anyone know how? Can't find it in settings or even developer options
I know it's only a silly little thing but I don't like it
Custom roms
Sent from my Xoom using xda app-developers app
What do you mean by screen fade
Rizy7 said:
What do you mean by screen fade
Click to expand...
Click to collapse
When you press the power button to switch the screen off, the screen goes from being black to a white line in the middle, then goes off. kinda like an old TV set
LooieENG said:
When you press the power button to switch the screen off, the screen goes from being black to a white line in the middle, then goes off. kinda like an old TV set
Click to expand...
Click to collapse
Custom ROM's have CRT off option
Thanks guys, but is there a way to disable this without installing a custom ROM?
I have root access
Also, if I have the stock ROM, but rooted, can I still just install OS updates like normal?
Not sure about JB, but in GB it was a framework mod. Decompile it and it's in one of the strings.xml
All you have to do is turn off the animations in developer options. I dont know which of the three changes the crt animation but one of them does. Youll need to reboot the phone for the changes to take place. No custom rom needed
Rizy7 said:
All you have to do is turn off the animations in developer options. I dont know which of the three changes the crt animation but one of them does. Youll need to reboot the phone for the changes to take place. No custom rom needed
Click to expand...
Click to collapse
hahah right! totally forgot about that.
Rizy7 said:
All you have to do is turn off the animations in developer options. I dont know which of the three changes the crt animation but one of them does. Youll need to reboot the phone for the changes to take place. No custom rom needed
Click to expand...
Click to collapse
Awesome
I'd done this before after a bit of Googling but didn't know you needed to reboot the phone
Much better now
I have created a flashable zip for Ambient Display if anyone wants it. It's working on stock Lollipop ROM and stock Marshmallow ROM.
Android 5.0 LRX210-
https://www.dropbox.com/s/zi72kuy0c201s83/N5AmbientDisplay5.0.zip?dl=0
Android 5.0.1 LRX22C-
https://www.dropbox.com/s/oxmhiwu40ezzv0x/N5AmbientDisplay5.0.1.zip?dl=0
Android 5.1.0 LMY47D-
https://www.dropbox.com/s/m7guflnxm550wzp/N5AmbientDisplay5.1LMY47D.zip?dl=0
Android 5.1.0 LMY47I-
https://www.dropbox.com/s/rtbdnu021vuk9zm/N5AmbientDisplay5.1LMY47I.zip?dl=0
Android 5.1.1 LMY48M-
http://forum.xda-developers.com/goo...-display-flashable-zip-nexus-5-t2971391/page7
Android 6.0 MRA58K-
https://www.dropbox.com/s/6bo1a1sxuotpf99/N5AD6.0MRA58K.zip?dl=0
tnx for sharing!
if I want to disable it one day how can I?
Is it working with Lollipop?
What about battery consumption?
Edit:
Sorry forget that Ambient display is new on Lollipop, so it is for lollipop.
I flashed it and it work great! tnx
Flashing now
Oferpaster said:
tnx for sharing!
if I want to disable it one day how can I?
Is it working with Lollipop?
What about battery consumption?
Edit:
Sorry forget that Ambient display is new on Lollipop, so it is for lollipop.
I flashed it and it work great! tnx
Click to expand...
Click to collapse
You can turn it off in the settings if you want to disable it. Also, it hasn't affected my battery life at all
Sent from my Nexus 5 using XDA Free mobile app
NexusLover69 said:
You can turn it off in the settings if you want to disable it. Also, it hasn't affected my battery life at all
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Tnx you the man!
is it working for you while lifting the phone?
Thanks For your work!
Can you explain me what is ambient display?
Recone said:
Can you explain me what is ambient display?
Click to expand...
Click to collapse
Look here: https://www.youtube.com/watch?v=5TyhaOjME5g
Thanks man working great :good:
Oferpaster said:
Tnx you the man!
is it working for you while lifting the phone?
Click to expand...
Click to collapse
No. Works the same way as it does on other Roms at the moment.
If your device detects light, it turns on 3+ times if you don't touch it compared to the Nexus 6. Hopefully soon it works better.
Is there any way to make the screen stay longer? 2 sec is to fast lol
Hi, just flashed on Cataclysm but it seems it's don't work. I don't see Ambient display in settings....so I can't enable it..Have you a solution...?
Oferpaster said:
Is there any way to make the screen stay longer? 2 sec is to fast lol
Click to expand...
Click to collapse
I'm not sure if I could edit the ambient screen on time, but I'll try.
Sent from my Nexus 5 using XDA Free mobile app
Oscarandco said:
Hi, just flashed on Cataclysm but it seems it's don't work. I don't see Ambient display in settings....so I can't enable it..Have you a solution...?
Click to expand...
Click to collapse
I only tested it on the stock Lollipop ROM. I'm not sure how to make it work for Cataclysm Rom, you should ask the Dev.
Sent from my Nexus 5 using XDA Free mobile app
NexusLover69 said:
I only tested it on the stock Lollipop ROM. I'm not sure how to make it work for Cataclysm Rom, you should ask the Dev.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Ok, I ask the dev and come back given the solution if it works ...:fingers-crossed:
Ok it's work on Cataclysm... After the first flash, if it's don't work, just reboot your phone and it's right. So thank's for the mod...
Oscarandco said:
Ok it's work on Cataclysm... After the first flash, if it's don't work, just reboot your phone and it's right. So thank's for the mod...
Click to expand...
Click to collapse
for me it's not working. when flashed mod, navigation and status bar disappear.
sryche said:
for me it's not working. when flashed mod, navigation and status bar disappear.
Click to expand...
Click to collapse
What's your configuration? Maybe you have an another mod who is in conflit. I have just installed Cataclysm from 05/12, flashed the update from 10/12 and then Ambient display... So I use Messanger and the first time it's doesn't work. I make a reboot and after it's work....:good:
same issue as stated above
1. navigation bar and status bar disappeared
2. systemUI FC continuous
3. soft reboot on pressing power button( pressing not holding)
plz fix!!!!!
Same here
ironclad1911 said:
same issue as stated above
1. navigation bar and status bar disappeared
2. systemUI FC continuous
3. soft reboot on pressing power button( pressing not holding)
plz fix!!!!!
Click to expand...
Click to collapse
I have the same issue on 10th december nightly.
I cannot figure out how to change the lockscreen time to USA format, non 24 hour clock
its driving me crazy can someone help?
drago10029 said:
I cannot figure out how to change the lockscreen time to USA format, non 24 hour clock
its driving me crazy [emoji43] can someone help?
Click to expand...
Click to collapse
Is your system time set to AM/PM?
Sent from my Mi 9T using Tapatalk
robogo1982 said:
Is your system time set to AM/PM?
Click to expand...
Click to collapse
neither, it's set auto. believe must phones come out of the box like that
what's even weirder is when I'm edit the lock screen time format, it looks like this! like ??
drago10029 said:
what's even weirder is when I'm edit the lock screen time format, it looks like this! like ??
Click to expand...
Click to collapse
this is solved, apparently themes are buying & don't respect your phone settings. went back to default
Don't use automatic 24 hour format in settings. Turn it off or on manually.
rounakr94 said:
Don't use automatic 24 hour format in settings. Turn it off or on manually.
Click to expand...
Click to collapse
read above, the is solved and themes are basically broken in k20/mi 9t. going back to default solved this.
drago10029 said:
read above, the is solved and themes are basically broken in k20/mi 9t. going back to default solved this.
Click to expand...
Click to collapse
For me themes are working fine. Time is shown in 12hour format no matter what theme is set.
Problem must be in OP's region and theme settings. Theme store is working fine for k20.
rounakr94 said:
For me themes are working fine. Time is shown in 12hour format no matter what theme is set.
Problem must be in OP's region and theme settings. Theme store is working fine for k20.
Click to expand...
Click to collapse
correction, some themes dont work. i confirmed by removing the theme and then the lockscreen clock displayed proper time format that chosen in the settings.