Related
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
Evryone trying to flash WP7 rom getting this error!
I found a way to bypass this error n get to wp7 easily.
Its simple-
in the folder Leo70_ROM- Copy customRuu.exe -
Execute it- it will create few files- (THESE ARE THE FILES WHICH ARE MISSING) den minimize customRuu.exe and run DWI as administrator and all will install smoothly without those errors as the missing files are now available!
CONFIRMED WORKING ON MY LEO 512-
Thread link for CustomRUU: http://forum.xda-developers.com/showthread.php?t=575524
CustomRUU attachment link: http://forum.xda-developers.com/attachment.php?attachmentid=239860&d=1256298258
Credits for CustomRUU-udK
May or may not work for u-
I m not responsible for any damage to ur device-
I created this thread cos ppl had this question in da wp7 Rom release thread and dere wasnt any proper solution- Since the thread is locked i posted the solution here-
BEST OF LUCK ALL- - Hope this helps - Don't forget to click on Thanks if it helped -
- PEACE
Out of curiosity, which version of customruu.exe are you using in this fix? I'm using Leo CustomRUU, version 1.1.0.0, date modified 03/10/2010. It eliminates one error, but still left with USB init failed. Hmmm...
i had this error, but simple fix...right click on the DWI.exe, run as administrator............problem solved, ...on win vista PC
What happened to me was that for some reason not all of the files had been extracted so if you extract files again to same folder from the zip, it should work.
dirkbogwatcher said:
Out of curiosity, which version of customruu.exe are you using in this fix? I'm using Leo CustomRUU, version 1.1.0.0, date modified 03/10/2010. It eliminates one error, but still left with USB init failed. Hmmm...
Click to expand...
Click to collapse
Its the customRUU in attached in this post
http://forum.xda-developers.com/showthread.php?t=575524
What u can do is-
take out ur battery for 5-10 minutes and then put it back agen boot into magldr and do all above agen-(i.e- copying the customRUU.exe- Executing it, etc)
Good luck
Hiho
Same Problem here and no fix up to date...
Greg
same problem here
Same here
By the way Im ftrying it from previous Android ROM and had this
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
I had a same problem. Trying exact it again in another place, install it again, it will be solved...
similar problem on my HD2
When I run the customRUU in LEO_70 I get two problems
1.
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
(This is when I try to run the DWI app as administrator)
2.
In the Rom Utility Upgrade I get ERROR [240] : File Open
- - - - - -
I had before downloading CustomRUU, tried to use RUU directly from MAGLDR112 and all that was doing was seeking USB, finding it but not loading anything and remaining at 0%.
What have I missed, any help is greatly appreciated..
Edit:
AHHHHH I think I get it now, [perhaps], the question I should be asking is...
Is it possible to install Windows 7 on my HTC HD2 6.5 which has the following specs
SPL-3.03.0000 XE
ROM version - 3.14.405.2 (04666) WWE
the reason i got this error was because the folder (LEO70_ROM) didnt have two files: rapidtool.exe and enterbootloader.exe, all it had was DWI.exe and the data.zip. i downloaded from a differenty link and once i had all the files in the folder it worked
Could I ask what SPL and ROM versions your phone had when you were installing the DWI?
Thanks..
I had this problem with windows xp, my solution was to disable the usb connection on activesync and had not have the error since, i read it somewhere on of the other forums here. so credits is to them.
Just wanted to chime in that this fixed my problem on Windows 7 that was frustrating me all night long!
HSPL 2.08
Radio 2.08 (I think - not too familiar with HD2 numbering, coming from galaxy S)
sda.171 said:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
Evryone trying to flash WP7 rom getting this error!
I found a way to bypass this error n get to wp7 easily.
Its simple-
in the folder Leo70_ROM- Copy customRuu.exe -
Execute it- it will create few files den minimize customRuu.exe and run DWI as administrator and all will install smoothly
CONFIRMED WORKING ON MY LEO 512-
May or may not work for u-
I m not responsible for any damage to ur device-
I created this thread cos ppl had this question in da wp7 Rom release thread and dere wasnt any proper solution- Since the thread is locked i posted the solution here-
BEST OF LUCK ALL- - Hope this helps
- PEACE
Click to expand...
Click to collapse
I'll be honest I thought this was rubbish when I first read it.. But it worked for me ! Many Thanks
i was tryin` it several times, i saw everytime this problems, then i updated hspl, and then he said 2 more times that i have the problem 119... then suddenly it installed wp7 on my hd2...
crazy best regards.
P.s.: never give up
yahya.haqiqi said:
What happened to me was that for some reason not all of the files had been extracted so if you extract files again to same folder from the zip, it should work.
Click to expand...
Click to collapse
Thank you. I had this problem, tried the above, worked first time.
Same problem
I am having the same issue trying to install win 7 from stock 6.5
Installed HSPL 2.08
I have all the files in the folder.
DWI, Data, Rapidtool, and bootloader.
I connect the phone, select active sync.
then run DWI, it reboots the phone into the bootloader, the phone says USB at the bottom, then thats it..
DWI gives
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Had the same thing happen to me 3 times. I've updated my phone twice and my girls once in the last couple of days. I got this error everytime on the first try... But I just left the phone plugged in and tried it again and it worked. I just figured I was over zealous and didn't wait long enough after I plugged it in.
I have noticed a couple of people not saying anything about magldr.
Order this needs to be installed.
1. HardSPL 2.08
2. Install magldr 1.13 or 1.12
3. Install wp7 via DWI.exe
pakure said:
i had this error, but simple fix...right click on the DWI.exe, run as administrator............problem solved, ...on win vista PC
Click to expand...
Click to collapse
+1 This procedure always fixes the flash errors in Vista and Windows 7!
so i was following the steps to flash windows 7 on to my tmo hd2. Once i tried to add the DWI.exe file i get this error
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
can you tell me where i went wrong? Thanks
Run the executable as administrator, uncheck allow usb connections from activesync, make sure zune is launched, install wp7 developer tools.
mack517 said:
so i was following the steps to flash windows 7 on to my tmo hd2. Once i tried to add the DWI.exe file i get this error
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
can you tell me where i went wrong? Thanks
Click to expand...
Click to collapse
You had a problem with the usb cable. Remove battery, hold volume key down and put battery back in. You should get back to the boot loader screen, now try magldr 112 again.
@russpattaya thanks you were right i changed out the cable and it worked thanks again
Hey guys I'm trying to install this clockwork and this is what I'm getting as error message, any help would be appreciated. thanks
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
ktreadwell said:
Hey guys I'm trying to install this clockwork and this is what I'm getting as error message, any help would be appreciated. thanks
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
Click to expand...
Click to collapse
Did you install it as administrator?
Sent from my HD2 Droid HD using XDA App
Have you tried looking through the sticky in this section?
http://forum.xda-developers.com/showthread.php?t=895655
Good info in there. Might help. It helped me when I first flashed.
Funny I was trying to install on Windows 7 computer and was getting this error message. Tried it on my other computer with xp and got it installed. Everything works great thanks for the help.
Sent from my HTC HD2 using XDA App
I had the same problem, the only solution was to take another usb port
actually.....for my computer that comes out and then another pop up comes out and say daf.exe has some problems and once that comes out, and i re run daf.exe, it works so maybe u need that pop up to pop out for it to work
I was having this same problem, I just ran it as Administrator, and it worked.
On Vista, right click, run as administrator.
hope this helps! good luck!
Hi my friend
it has a easy solution.
you should download The android ROM again!!???
because you're download was not complete, so I advice you for download it with a good Download manger.
GOOD LUCK
Hi please help me!I have a problem with the instaling wm7.It is:when i begin uploalding the windows the procedure start's and after a few second it stops?My radio is 2.15.50.14 is it old? I dont know what is the problem.I am chosing number 5 from nand and start but 5-6 sec. after starting on the DFT screen is written:Failed
Please give me a direct link for the best radio and the best WM7 at the moment.
thanks in advance.
This is written on DFT window after starting the procedure.
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
georgitomov_86 said:
Hi please help me!I have a problem with the instaling wm7.It is:when i begin uploalding the windows the procedure start's and after a few second it stops?My radio is 2.15.50.14 is it old? I dont know what is the problem.I am chosing number 5 from nand and start but 5-6 sec. after starting on the DFT screen is written:Failed
Please give me a direct link for the best radio and the best WM7 at the moment.
thanks in advance.
This is written on DFT window after starting the procedure.
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
Click to expand...
Click to collapse
i assume your radio is OK ,but what about HSPL ?
it is HSPL 3
I'm guessing you have MAGLDR 1.13 installed? That 5th option you're selecting is "USB flasher", right?
Based on the error "EnterBootloader missing": how are you trying to flash WP7? Did you extract all contents of the DFT_LEO70_RELEASE.rar file (or whatever archive)? It sounds a bit like the installer is looking for the EnterBootloader.exe file in its directory and isn't finding it.
So i extract leo79_rom inside the folder the is a data.rar i tried with 1.12 and 1.13 it is the same every time.
I dont know about data.rar inside the folder.
Yes i chose 5 and the every thing else.I dont know what is missing what bootloalder i am in nand right?I have to extrract the data.rar???Inside the archive? the rom is moon light dft!
I tried this too.To extract data still nothing.The same.
georgitomov_86 said:
So i extract leo79_rom inside the folder the is a data.rar i tried with 1.12 and 1.13 it is the same every time.
I dont know about data.rar inside the folder.
Yes i chose 5 and the every thing else.I dont know what is missing what bootloalder i am in nand right?I have to extrract the data.rar???Inside the archive? the rom is moon light dft!
I tried this too.To extract data still nothing.The same.
Click to expand...
Click to collapse
try running as administrator.
Yes i tried this too!!! The same!
Come on people!Help me i want wm7.I dont know what to do??!!!!
download and extract this rom
http://forum.xda-developers.com/showthread.php?t=912416
replace the data.rar with your moon one, and try again. (run as admin)
I made it.The problem is in the rom moon light!
okay so im fairly new to all of this so y problem is i have a htc hd2 and i was trying to unlock it i guess with the nand software but when i get to the usb flasher mode the dft software reads Readme.txt for this release is missing.so i clicked next and it reads
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
now my phone is stuck like this and i dont have a replacement phone ugh please somebody help
i think you installed mgldr,after that don't click daf.just find a rom from nand thread,follow its instructions,if you can't, ask for help again.
You need to make sure you to right click on your mouse and Run as Administrator before running the DAF.exe file.
terrell60612 said:
okay so im fairly new to all of this so y problem is i have a htc hd2 and i was trying to unlock it i guess with the nand software but when i get to the usb flasher mode the dft software reads Readme.txt for this release is missing.so i clicked next and it reads
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
now my phone is stuck like this and i dont have a replacement phone ugh please somebody help
Click to expand...
Click to collapse
u can help us by writing the steps u followed ... so we can help u ...u must mised solething ...