An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
Evryone trying to flash WP7 rom getting this error!
I found a way to bypass this error n get to wp7 easily.
Its simple-
in the folder Leo70_ROM- Copy customRuu.exe -
Execute it- it will create few files- (THESE ARE THE FILES WHICH ARE MISSING) den minimize customRuu.exe and run DWI as administrator and all will install smoothly without those errors as the missing files are now available!
CONFIRMED WORKING ON MY LEO 512-
Thread link for CustomRUU: http://forum.xda-developers.com/showthread.php?t=575524
CustomRUU attachment link: http://forum.xda-developers.com/attachment.php?attachmentid=239860&d=1256298258
Credits for CustomRUU-udK
May or may not work for u-
I m not responsible for any damage to ur device-
I created this thread cos ppl had this question in da wp7 Rom release thread and dere wasnt any proper solution- Since the thread is locked i posted the solution here-
BEST OF LUCK ALL- - Hope this helps - Don't forget to click on Thanks if it helped -
- PEACE
Out of curiosity, which version of customruu.exe are you using in this fix? I'm using Leo CustomRUU, version 1.1.0.0, date modified 03/10/2010. It eliminates one error, but still left with USB init failed. Hmmm...
i had this error, but simple fix...right click on the DWI.exe, run as administrator............problem solved, ...on win vista PC
What happened to me was that for some reason not all of the files had been extracted so if you extract files again to same folder from the zip, it should work.
dirkbogwatcher said:
Out of curiosity, which version of customruu.exe are you using in this fix? I'm using Leo CustomRUU, version 1.1.0.0, date modified 03/10/2010. It eliminates one error, but still left with USB init failed. Hmmm...
Click to expand...
Click to collapse
Its the customRUU in attached in this post
http://forum.xda-developers.com/showthread.php?t=575524
What u can do is-
take out ur battery for 5-10 minutes and then put it back agen boot into magldr and do all above agen-(i.e- copying the customRUU.exe- Executing it, etc)
Good luck
Hiho
Same Problem here and no fix up to date...
Greg
same problem here
Same here
By the way Im ftrying it from previous Android ROM and had this
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
I had a same problem. Trying exact it again in another place, install it again, it will be solved...
similar problem on my HD2
When I run the customRUU in LEO_70 I get two problems
1.
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
(This is when I try to run the DWI app as administrator)
2.
In the Rom Utility Upgrade I get ERROR [240] : File Open
- - - - - -
I had before downloading CustomRUU, tried to use RUU directly from MAGLDR112 and all that was doing was seeking USB, finding it but not loading anything and remaining at 0%.
What have I missed, any help is greatly appreciated..
Edit:
AHHHHH I think I get it now, [perhaps], the question I should be asking is...
Is it possible to install Windows 7 on my HTC HD2 6.5 which has the following specs
SPL-3.03.0000 XE
ROM version - 3.14.405.2 (04666) WWE
the reason i got this error was because the folder (LEO70_ROM) didnt have two files: rapidtool.exe and enterbootloader.exe, all it had was DWI.exe and the data.zip. i downloaded from a differenty link and once i had all the files in the folder it worked
Could I ask what SPL and ROM versions your phone had when you were installing the DWI?
Thanks..
I had this problem with windows xp, my solution was to disable the usb connection on activesync and had not have the error since, i read it somewhere on of the other forums here. so credits is to them.
Just wanted to chime in that this fixed my problem on Windows 7 that was frustrating me all night long!
HSPL 2.08
Radio 2.08 (I think - not too familiar with HD2 numbering, coming from galaxy S)
sda.171 said:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
Evryone trying to flash WP7 rom getting this error!
I found a way to bypass this error n get to wp7 easily.
Its simple-
in the folder Leo70_ROM- Copy customRuu.exe -
Execute it- it will create few files den minimize customRuu.exe and run DWI as administrator and all will install smoothly
CONFIRMED WORKING ON MY LEO 512-
May or may not work for u-
I m not responsible for any damage to ur device-
I created this thread cos ppl had this question in da wp7 Rom release thread and dere wasnt any proper solution- Since the thread is locked i posted the solution here-
BEST OF LUCK ALL- - Hope this helps
- PEACE
Click to expand...
Click to collapse
I'll be honest I thought this was rubbish when I first read it.. But it worked for me ! Many Thanks
i was tryin` it several times, i saw everytime this problems, then i updated hspl, and then he said 2 more times that i have the problem 119... then suddenly it installed wp7 on my hd2...
crazy best regards.
P.s.: never give up
yahya.haqiqi said:
What happened to me was that for some reason not all of the files had been extracted so if you extract files again to same folder from the zip, it should work.
Click to expand...
Click to collapse
Thank you. I had this problem, tried the above, worked first time.
Same problem
I am having the same issue trying to install win 7 from stock 6.5
Installed HSPL 2.08
I have all the files in the folder.
DWI, Data, Rapidtool, and bootloader.
I connect the phone, select active sync.
then run DWI, it reboots the phone into the bootloader, the phone says USB at the bottom, then thats it..
DWI gives
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Had the same thing happen to me 3 times. I've updated my phone twice and my girls once in the last couple of days. I got this error everytime on the first try... But I just left the phone plugged in and tried it again and it worked. I just figured I was over zealous and didn't wait long enough after I plugged it in.
I have noticed a couple of people not saying anything about magldr.
Order this needs to be installed.
1. HardSPL 2.08
2. Install magldr 1.13 or 1.12
3. Install wp7 via DWI.exe
pakure said:
i had this error, but simple fix...right click on the DWI.exe, run as administrator............problem solved, ...on win vista PC
Click to expand...
Click to collapse
+1 This procedure always fixes the flash errors in Vista and Windows 7!
I installed a NAND android rom but I didnt like it, so i downloaded a different one, went to usb flasher, ran the DFT android installer but then i get this:
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description: flash write failed
Info: .\RSPL\RSPL.cpp (586)
On the phone it told asked me if i wanted to clear an old partition so i pressed yes but still didnt work. I am new to this "flashing android to hd2", pls help this is getting very annoying
faizan445 said:
I installed a NAND android rom but I didnt like it, so i downloaded a different one, went to usb flasher, ran the DFT android installer but then i get this:
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description: flash write failed
Info: .\RSPL\RSPL.cpp (586)
On the phone it told asked me if i wanted to clear an old partition so i pressed yes but still didnt work. I am new to this "flashing android to hd2", pls help this is getting very annoying
Click to expand...
Click to collapse
try this : http://forum.xda-developers.com/showthread.php?t=945427
no workie
Looked promising but it didnt work, thanks for the reply tho
If you are using Vista or Win7,
you need to run the DFT.exe as Admin.
Right klick on DFT.exe
and then run as Administrator.
Im using winxp 32bit sp2 i still tried to run as admin but still not working... im going back to the SD version of android for now......
okay so im fairly new to all of this so y problem is i have a htc hd2 and i was trying to unlock it i guess with the nand software but when i get to the usb flasher mode the dft software reads Readme.txt for this release is missing.so i clicked next and it reads
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
now my phone is stuck like this and i dont have a replacement phone ugh please somebody help
i think you installed mgldr,after that don't click daf.just find a rom from nand thread,follow its instructions,if you can't, ask for help again.
You need to make sure you to right click on your mouse and Run as Administrator before running the DAF.exe file.
terrell60612 said:
okay so im fairly new to all of this so y problem is i have a htc hd2 and i was trying to unlock it i guess with the nand software but when i get to the usb flasher mode the dft software reads Readme.txt for this release is missing.so i clicked next and it reads
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
now my phone is stuck like this and i dont have a replacement phone ugh please somebody help
Click to expand...
Click to collapse
u can help us by writing the steps u followed ... so we can help u ...u must mised solething ...
my phone does not boot to windows its leo and after it stops at this pic attached any ideas what to do ? to install a new rom to it and how thanks as I understand I need the active sync to be connected and in my case i cant
you dont' need activesync to connect. you can simply hold the voume down rocker and power button (at the same time) during boot until you get the tricolored (three colored) boot screen.
download the HTC Toolkit. download HSPL. from the tricolor screen you can flash HardSPL 2.08. then open the toolkit and flash magLDR.
go to the development section of the forum and look at one of the first posts ... they outline how to root, get new bootloader, and to flash a rom. they are written simply and easy to understand.
good luck
I installed the hspl using tool kit but it doesn't let me install MAGLDR error msg missing readme.txt then
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
any ideas
U have Windows mobile device center in ur computer?
Did you consider putting " missing readme.txt then Error Description: Config load failed. Info: .\RSPL\RSPL.cpp (725)" into Google? Its a really common error...
TyphooN_CM7_v3.7.5-MAGLDR
Thank u all for your help I installed (TyphooN_CM7_v3.7.5-MAGLDR) successfully but the wifi is not working properly it disconnects right away and how can I sync contacts from outlook ?
For outlook sync Google myphoneexplorer (no spaces)
i'm currently running wp 6.5, i don't know why but there are many problems in this window like set hack sometime's etc.
any ways i want to install wp 7.
i watch videos from youtube that how to install it.
but when i try to flash mobile with "DFT Window Installer for HTC Leo [DWI100]" an error occur after searching.
An error has occurred.
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Basically, i don't know how to install window phone and an error occur i don't know why, so help me.
john9 said:
i'm currently running wp 6.5, i don't know why but there are many problems in this window like set hack sometime's etc.
any ways i want to install wp 7.
i watch videos from youtube that how to install it.
but when i try to flash mobile with "DFT Window Installer for HTC Leo [DWI100]" an error occur after searching.
An error has occurred.
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Basically, i don't know how to install window phone and an error occur i don't know why, so help me.
Click to expand...
Click to collapse
When you click on the exe to install WP7 right click it and select run as administrator. If that does not work go into MAGLDR option 4 and select enable last 24.
see the below link on how i got the error then resolve it
DWI.exe
I am installing Windows phone 7.8 on HTC hd2. Don't know where to find the "DWI.exe". Help pls