[Q] How can i make display always on ??? - Galaxy Note GT-N7000 General

question is at the title. or at least dont turn display off while charging can be enough too.

There are a few ways.
The app 'tasker' is very good for 'if X then y'. i.e. if charging or running a web browser, set screen timeout to 32432 hours.
For short term use, I use widgetsoid to have a 'click this to force display always on' widget.
- Frank

thank you very much

Related

Galaxy Note Screen Timeout

I have bought an excellant stand for my Note so that I can watch movies but the maximum screen timeout in settings is 10 minutes which is not long enough. So I've downloaded a free application from Android Market called "Screen Off Timeout" by "MTU Group" which allows you to keep the screen on permanently or only permanently when plugged into a power supply.
Here is the stand link:
http://www.mobilefun.co.uk/universal-smart-stand-for-mobile-phones-p32691.htm?referer=aff_aw_102463
uhh, not too sure what youre talking about. galaxy note screen timeout doesnt affect movies or videos.
i have my timeout set to 1 minute. 4 minute videos play in their entirety without the screen turning off. 2 hour movies play in their entirety without the screen turning off.
its not just the default player. most video players have the 'permission' to keep the screen on when running. you dont need a third party app.
Souai said:
uhh, not too sure what youre talking about. galaxy note screen timeout doesnt affect movies or videos.
i have my timeout set to 1 minute. 4 minute videos play in their entirety without the screen turning off. 2 hour movies play in their entirety without the screen turning off.
its not just the default player. most video players have the 'permission' to keep the screen on when running. you dont need a third party app.
Click to expand...
Click to collapse
Thanks for your reply. My timeout occurred whilst viewing a Web page which the app. fixes. I assumed the app was needed for movies too which it obviously doesn't and I stand corrected.
KeepScreen in Market is what you need. You can select the apps you want to keep the screen on.
Sent from my GT-N7000
kosmocos said:
KeepScreen in Market is what you need. You can select the apps you want to keep the screen on.
Sent from my GT-N7000
Click to expand...
Click to collapse
Thanks for your reply. I will check out KeepScreen.
I was searching for this function, I had it on my N900, so I could keep track on i.e. a website while the phone is charging on my desk. On the Note this option is not available in the screen settings.
Be careful when displaying static images/text on the screen for prolonged periods of time. AMOLED screens can burn out. Each color in each pixel as a life span and will get dimmer the longer it is used. During normal use this would will have little effect. However if you leave the screen on for long periods of time without changing what is displayed you will compound the problem. In certain cases "burn-ins" have been noticed in as little has a few months. Others have gone years using their devices without any noticeable issues. Its all about how you use it.
Using the phone for long periods as a desktop clock or having it display a webpage with minimal changes in display, are bad ideas.

Screen dims when it shouldn't

I have set my S4 up so that it runs at 100% display illumination when charging. No autobrightness.
What is bothering me know is that the screen dims to about 50% very quickly after I stop touching the display and jumps up to 100% while I touch it.
Toggling smart stay doesn't change anything. Smart stay on doesn't help even when I look at the display (though it should just prevent it from going off .. not from dimming if I understand correctly.
I would like to display to stay at 100% when charging .. or at least set dimming to "after 15 secs" or so.
What needs to be done?
daniello8 said:
I have set my S4 up so that it runs at 100% display illumination when charging. No autobrightness.
What is bothering me know is that the screen dims to about 50% very quickly after I stop touching the display and jumps up to 100% while I touch it.
Smart stay toggling smart stay doesn't change anything. Smart stay on doesn't help even when I look at the display (though it should just prevent it from going off .. not from dimming if I understand correctly.
I would like to display to stay at 100% when charging.
What needs to be done?
Click to expand...
Click to collapse
I was reading about that and i found something about the chipset SnapDragon has an inside feature to adjust the screen brightness independently of the software (firmware on this case). Maybe you are watching that effect..
tomboymad said:
I was reading about that and i found something about the chipset SnapDragon has an inside feature to adjust the screen brightness independently of the software (firmware on this case). Maybe you are watching that effect..
Click to expand...
Click to collapse
There is a small tool that fixes it: "Caffeine" .. obviously
Intelliscreen also does the trick .. and there is a timeout you can set (not sure if it messes up the timeout for regular use when not charging though).
daniello8 said:
There is a small tool that fixes it: "Caffeine" .. obviously
Intelliscreen also does the trick .. and there is a timeout you can set (not sure if it messes up the timeout for regular use when not charging though).
Click to expand...
Click to collapse
Is not the solution because caffeine prevents from time up screen brightness but it doesn't prevent from cpu feature. Even if the screen is always wake up and the autobrightness is off, the brightness will be changed because the chipset.
tomboymad said:
Is not the solution because caffeine prevents from time up screen brightness but it doesn't prevent from cpu feature. Even if the screen is always wake up and the autobrightness is off, the brightness will be changed because the chipset.
Click to expand...
Click to collapse
Well .. it works for me.
daniello8 said:
I have set my S4 up so that it runs at 100% display illumination when charging. No autobrightness.
What is bothering me know is that the screen dims to about 50% very quickly after I stop touching the display and jumps up to 100% while I touch it.
Toggling smart stay doesn't change anything. Smart stay on doesn't help even when I look at the display (though it should just prevent it from going off .. not from dimming if I understand correctly.
I would like to display to stay at 100% when charging .. or at least set dimming to "after 15 secs" or so.
What needs to be done?
Click to expand...
Click to collapse
Could this be related to heat? With the screen on and charging + what ever other task you have the S4 doing it may be the S600 is governing the screen to reduce heat... just a theory like.
I'm having the same problem too.
If i unlock the phone the screens dims to about minimum brightness.
I can touch the brightness bar to make it brighter and it stays that way for as long as i don't lock the phone
If i lock the phone and unlock it again the screen dims again?
Tried all different settings bur nothing helps...
Very annoying....
Yesterday i bought and installed lightflow to control my led indicator.
Just a minute ago i removed the app and voila! No more screen dimming!
Damn, really love that app but rather no led control than having my screen dimmed to the lowest possible brightness.

[Q] Auto dimming my car mounted Nexus 7

So I've been doing some general googling, and I haven't come across a good solution for my issue, so I thought I would post it here. Nexus 7 is mounted on the dash of my car. Powers on and powers off (deep sleep), connects to hotspot fine, generally, is working great. HOWEVER, there is one feature that I would love to be able to replicate from OEM in dash systems that I've seen. I would like the screen to dim when the unit isn't actively being used. Not time out and go to sleep, just dim (or maybe even turn off the LED backlight). Then, when I tap the screen, I want the screen to come back to automatic brightness mode based on the ambient light sensor. I've found plenty of apps that will turn the screen on or off with various gestures and such, but they all seem to require disabling or otherwise changing the way the ambient light sensor works. From those of you that use these in your car, I'm hoping that you have some suggestions. Thanks in advance.
bigdogbts said:
So I've been doing some general googling, and I haven't come across a good solution for my issue, so I thought I would post it here. Nexus 7 is mounted on the dash of my car. Powers on and powers off (deep sleep), connects to hotspot fine, generally, is working great. HOWEVER, there is one feature that I would love to be able to replicate from OEM in dash systems that I've seen. I would like the screen to dim when the unit isn't actively being used. Not time out and go to sleep, just dim (or maybe even turn off the LED backlight). Then, when I tap the screen, I want the screen to come back to automatic brightness mode based on the ambient light sensor. I've found plenty of apps that will turn the screen on or off with various gestures and such, but they all seem to require disabling or otherwise changing the way the ambient light sensor works. From those of you that use these in your car, I'm hoping that you have some suggestions. Thanks in advance.
Click to expand...
Click to collapse
Hi, bigdogbts...
What you suggest certainly sounds feasible. I have no immediate solution, just some ideas/pointers.
Three pieces of software come to mind...
A Custom Launcher such as Apex or Nova. These give you a double tap gesture on the screen, which you can associate with some action to run... app, shortcut or 'activity'.
Lux Auto Brightness.
https://play.google.com/store/apps/details?id=com.vito.lux
This is capable of reducing the screen brightness right down to zero, such that the device looks likes it's turned off.
Tasker.
https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm
An app which is capable of automating all sorts of things on an Android device. You can associate an action instigated by the the user with a desired objective. Unfortunately, it has a bit of a steep learning curve... I bought it myself a few months ago, and I still haven't got around to really fully understanding it.
I suspect that if you can 'associate' Lux Auto Brightness (set with some pre-arranged brightness settings, ie., a completely dark screen) with a specified action (like double tapping the screen) with either Apex or Nova launchers (via gesture) or possibly with Tasker, maybe via a script...then you may be able to accomplish your goal.
As I've said, I think that what you're asking sounds possible... it's just a case of finding the right apps, and 'stitching' them all together. And maybe with a bit of tinkering with the apps I've mentioned, you can, hopefully, get something that works,
Good luck.
Rgrds,
Ged.
I think tasker can do something like that.

Moto display light up every other second when have notification

So my moto display will constantly light up every other second when I have notification such as E-mail etc. I feel like that kills a lot of battery when I just put it on the table. Is there are way to change the setting or something so it only light up for once or twice. I can always reach to the phone to check the notification so there is no need for notification always light up. Also, I found out that if I block the IR blaster it will not light up anymore but as soon as I remove the cover it will constantly light up again. I think constantly light up screen really burn down a lot of battery.
It doesn't use as much as you'd think. Moto Display (formerly Active Display on Moto X 2013) only lights the pixels that you can see. The rest of the screen is off.
With the Moto X, the display "breathes" when there are notifications pending. It flashes every 2-3 seconds, but does flash slower if left alone for a while. Placing the phone face down turns it off. You can also define quiet hours that disable the Active Display completely. Lastly, you can turn it on or off for specific apps that you don't want to trigger the notifications. For example, you may want your Gmail and text messages, but not Twitter. You can also dismiss the notifications by swiping left/right when selecting them (not certain if that is still true for Turbo as it has multiple notifications whereas the Moto X 2013 only shows one at a time).
I don't know of any way to turn it off after some amount of time, it's either on or off, but you can change the apps that are included. And as I said, it does blink slower (more time between blinks) if you don't touch the phone for a while.
Ok thanks that really helps... I just hope they can add a setting so it won't always light up. I'm also wondering if battery consumption by moto display count as part of the cell standby because it is still quite high compare to other smartphone I had used before.
emptydream said:
Ok thanks that really helps... I just hope they can add a setting so it won't always light up. I'm also wondering if battery consumption by moto display count as part of the cell standby because it is still quite high compare to other smartphone I had used before.
Click to expand...
Click to collapse
The Moto Display battery usage falls under the "Android System" app in the battery stats. You can confirm it in by opening the app in the battery stats and observing the "Active Display System Process" listed.
You can turn off moto display...or you can swipe the notification to the right or left to "dismiss it" without opening the phone...or you can leave the phone face down on the table
I am unsure if I will buy this device.
Someone who has moto maxx can download an application from the notification screen and test if it works well?
These applications promise to pick a different light for each application notification screen on moto maxx. (Since he does not have conventional LED)
I will be very grateful if someone could do this to me
I think Moto should definitely change the Moto Display behavior so that it uses the front sensors instead of the gyro (movement) when there is no current notification. This would allow you to wave for the time and it would be displayed when you pulled it out of your pocket, but it would not be shown by bumps in the road or other movement. If there is a notification waiting the behavior should stay the same because it is up to the user to acknowledge/dismiss it.
neyes said:
I think Moto should definitely change the Moto Display behavior so that it uses the front sensors instead of the gyro (movement) when there is no current notification. This would allow you to wave for the time and it would be displayed when you pulled it out of your pocket, but it would not be shown by bumps in the road or other movement. If there is a notification waiting the behavior should stay the same because it is up to the user to acknowledge/dismiss it.
Click to expand...
Click to collapse
On the Moto X 2013 at least, it doesn't turn on every time it moves. If you're holding it in your hand and walking, it doesn't just stay on all the time. Once you set it down on the table and let it sit for a moment, then touch it again, it lights up.
I usually leave mine sitting on my desk at work and if there are no notifications pending (to make it breathe), I just touch it so it rolls slightly on the curved back and it shows me the time.

ambient always on display

Does anyone else has a problem with ambient always on display not working? Most of the time it is there, but even if I turn off the Scheduler, sometimes off for hours, just the black screen. 10.3.10 MIUI
Yes, the same issue for me. Little annoying, but I hope it will be fixed in the next update. Maybe I will for now just turn off the always-on display.
You should read the description
Could you be more specific please?
"To reduce power consumption, items won't be displayed in the following situations:
1. When your device lies in dark for a long time.
2. When DND mode is on"
Haha, didn't saw that, but still, my room wasn't dark at all and it still went off. For now I have just disabled that option, and if that is only big bug I will be super happy.

Categories

Resources