So my moto display will constantly light up every other second when I have notification such as E-mail etc. I feel like that kills a lot of battery when I just put it on the table. Is there are way to change the setting or something so it only light up for once or twice. I can always reach to the phone to check the notification so there is no need for notification always light up. Also, I found out that if I block the IR blaster it will not light up anymore but as soon as I remove the cover it will constantly light up again. I think constantly light up screen really burn down a lot of battery.
It doesn't use as much as you'd think. Moto Display (formerly Active Display on Moto X 2013) only lights the pixels that you can see. The rest of the screen is off.
With the Moto X, the display "breathes" when there are notifications pending. It flashes every 2-3 seconds, but does flash slower if left alone for a while. Placing the phone face down turns it off. You can also define quiet hours that disable the Active Display completely. Lastly, you can turn it on or off for specific apps that you don't want to trigger the notifications. For example, you may want your Gmail and text messages, but not Twitter. You can also dismiss the notifications by swiping left/right when selecting them (not certain if that is still true for Turbo as it has multiple notifications whereas the Moto X 2013 only shows one at a time).
I don't know of any way to turn it off after some amount of time, it's either on or off, but you can change the apps that are included. And as I said, it does blink slower (more time between blinks) if you don't touch the phone for a while.
Ok thanks that really helps... I just hope they can add a setting so it won't always light up. I'm also wondering if battery consumption by moto display count as part of the cell standby because it is still quite high compare to other smartphone I had used before.
emptydream said:
Ok thanks that really helps... I just hope they can add a setting so it won't always light up. I'm also wondering if battery consumption by moto display count as part of the cell standby because it is still quite high compare to other smartphone I had used before.
Click to expand...
Click to collapse
The Moto Display battery usage falls under the "Android System" app in the battery stats. You can confirm it in by opening the app in the battery stats and observing the "Active Display System Process" listed.
You can turn off moto display...or you can swipe the notification to the right or left to "dismiss it" without opening the phone...or you can leave the phone face down on the table
I am unsure if I will buy this device.
Someone who has moto maxx can download an application from the notification screen and test if it works well?
These applications promise to pick a different light for each application notification screen on moto maxx. (Since he does not have conventional LED)
I will be very grateful if someone could do this to me
I think Moto should definitely change the Moto Display behavior so that it uses the front sensors instead of the gyro (movement) when there is no current notification. This would allow you to wave for the time and it would be displayed when you pulled it out of your pocket, but it would not be shown by bumps in the road or other movement. If there is a notification waiting the behavior should stay the same because it is up to the user to acknowledge/dismiss it.
neyes said:
I think Moto should definitely change the Moto Display behavior so that it uses the front sensors instead of the gyro (movement) when there is no current notification. This would allow you to wave for the time and it would be displayed when you pulled it out of your pocket, but it would not be shown by bumps in the road or other movement. If there is a notification waiting the behavior should stay the same because it is up to the user to acknowledge/dismiss it.
Click to expand...
Click to collapse
On the Moto X 2013 at least, it doesn't turn on every time it moves. If you're holding it in your hand and walking, it doesn't just stay on all the time. Once you set it down on the table and let it sit for a moment, then touch it again, it lights up.
I usually leave mine sitting on my desk at work and if there are no notifications pending (to make it breathe), I just touch it so it rolls slightly on the curved back and it shows me the time.
Related
I'm currently considering exchanging my Note 4 (due to it's sheer size) for the Turbo, but I'm concerned about not having an LED notification.
I did however read that the Active Display works really well with notifications. The thing is, I despise having locked screens on my personal phones (work phones are different story). Does Active Display require a locked screen to work?
livinginavacuum said:
I'm currently considering exchanging my Note 4 (due to it's sheer size) for the Turbo, but I'm concerned about not having an LED notification.
I did however read that the Active Display works really well with notifications. The thing is, I despise having locked screens on my personal phones (work phones are different story). Does Active Display require a locked screen to work?
Click to expand...
Click to collapse
what do you mean with locked screen?
pattern security?
i can tell from my previous droid maxx that active display works on locked by pattern or unlocked phone. and you can even choose to show the notification or just the app. (i.e. active display showing the whatsapp message you just got or just the whatsapp icon to let you know that you have a new message.)
livinginavacuum said:
I'm currently considering exchanging my Note 4 (due to it's sheer size) for the Turbo, but I'm concerned about not having an LED notification.
I did however read that the Active Display works really well with notifications. The thing is, I despise having locked screens on my personal phones (work phones are different story). Does Active Display require a locked screen to work?
Click to expand...
Click to collapse
Yes, it works if you don't have any lock screen setup. Actually it works better (definitely faster) imo because Active Display just opens up the app right away, when you scroll up with the notification icon. Otherwise, you scroll up on the AD icon, then get stuck having to enter your password/pin, and finally the app opens up.
As others said, you do not need security for Active Display, if it works anything like the Moto X.
I use Tasker and Secure Settings to toggle PIN lockscreen when I'm on home WiFi. If I leave home, my lockscreen is reactivated, but Active Display still works. I usually don't leave my phone sit long enough to lock during the day (30 minutes), but if it does lock, swiping the active display brings you to the lockscreen to put in your PIN. It's not the same as the normal lock screen, it's like a "popup" that only shows the keypad. It does not show the clock, alarms, etc (which I think is actually just the stock lockscreen widget).
If lockscreen is off, swiping the Active Display takes you straight to the home screen.
Hope this helps.
having swapped out my GS3 (worst phone i ever owned) for a Droid Maxx last year i can say that Active Display (now Moto Display i think?) is the greatest thing ever!...I was worried about losing the LED notification back then, but active display is just plain better...
and now it does not require a lock screen setup afaik
Thanks for the input guys, but I'm not sure if I understand how this works.
On my GS3 (and now Note 4) I turn off my locked screen so that once I click on the power button it turns on my non-locked display.
So correct me if I'm wrong. With Active Display it will let me know of any notifications when it senses my hand wave and I won't have to click on the power button to turn on my non-locked display - instead just some kind of tap patten or something?
livinginavacuum said:
Thanks for the input guys, but I'm not sure if I understand how this works.
On my GS3 (and now Note 4) I turn off my locked screen so that once I click on the power button it turns on my non-locked display.
So correct me if I'm wrong. With Active Display it will let me know of any notifications when it senses my hand wave and I won't have to click on the power button to turn on my non-locked display - instead just some kind of tap patten or something?
Click to expand...
Click to collapse
Correct. If there is no lock screen, the Active Display shows the clock and notification icons. On the Moto X you can swipe down to unlock to the home screen, up to go to the app with the most recent notification, or swipe left/right to dismiss the current notifications from Active Display.
Active Display it self sort of serves as a lock screen, just a slide to unlock. If you press the physical power button the phone turns on to the home screen.
But would I still be able to use the power button to go straight to the home screen similarly to the way I have it setup on my GS3 and Note 4?
livinginavacuum said:
But would I still be able to use the power button to go straight to the home screen similarly to the way I have it setup on my GS3 and Note 4?
Click to expand...
Click to collapse
If there was no security method selected, yes.
fury683 said:
If there was no security method selected, yes.
Click to expand...
Click to collapse
Awesome.
And you guys are saying that the Active Display is so great that I'll prefer to turn on my non-locked display with it instead of using the power button?
livinginavacuum said:
Awesome.
And you guys are saying that the Active Display is so great that I'll prefer to turn on my non-locked display with it instead of using the power button?
Click to expand...
Click to collapse
Not sure how else I/we can explain it...
On the Moto X 2013, if you have Screen Lock set to none and Active Display on, you will see notifications on the screen in the order they arrive (most recent is "featured" in the ring, others are shown below it. When you touch the Active Display ring, you swipe up to go to that app/notification. If you swipe down, it just "unlocks" and goes to your home screen. Swipe left or right clears the pending notifications from Active Display. Pressing the power button on the side will go straight to the home screen.
Using Active Display with a security method will do all of those same things, but if your lock screen timeout has surpassed, you will have to put in your PIN/password before you can go to a notification from Active Display. If you press the power button instead of using Active Display, you are taken to the PIN/password screen.
I really only use my power button for turning the screen off, not on. Sometimes I do still use the power button to turn on if there is nothing on the active display. Wen it sits on a table, the screen is all black. If you move the device (even slightly), the clock will show up with an unlock icon, when there are no notifications pending. If there are notifications pending, the screen "breathes" every few seconds (10-15 or so, and I believe it gets less frequent if it sits untouched for a while), flashing the clock and notification icons until you unlock/clear them.
Now, the screenshots of Active Display look different for the Turbo because it shows multiple icons on the screen. Moto X only shows one in a white circle. The screenshots I've seen of Turbo show three. Not sure exactly how they react.
As for if you will use the screen vs. power button, I guess that's up to you.
fury683 said:
Not sure how else I/we can explain it...
On the Moto X 2013, if you have Screen Lock set to none and Active Display on, you will see notifications on the screen in the order they arrive (most recent is "featured" in the ring, others are shown below it. When you touch the Active Display ring, you swipe up to go to that app/notification. If you swipe down, it just "unlocks" and goes to your home screen. Swipe left or right clears the pending notifications from Active Display. Pressing the power button on the side will go straight to the home screen.
Using Active Display with a security method will do all of those same things, but if your lock screen timeout has surpassed, you will have to put in your PIN/password before you can go to a notification from Active Display. If you press the power button instead of using Active Display, you are taken to the PIN/password screen.
I really only use my power button for turning the screen off, not on. Sometimes I do still use the power button to turn on if there is nothing on the active display. Wen it sits on a table, the screen is all black. If you move the device (even slightly), the clock will show up with an unlock icon, when there are no notifications pending. If there are notifications pending, the screen "breathes" every few seconds (10-15 or so, and I believe it gets less frequent if it sits untouched for a while), flashing the clock and notification icons until you unlock/clear them.
Now, the screenshots of Active Display look different for the Turbo because it shows multiple icons on the screen. Moto X only shows one in a white circle. The screenshots I've seen of Turbo show three. Not sure exactly how they react.
As for if you will use the screen vs. power button, I guess that's up to you.
Click to expand...
Click to collapse
Me replying with "awesome" = yourself and others did a superb job explaining everything to me and making this a non-concern for me regarding potentially getting the Turbo.
But totality appreciate you giving me more input on how the Active Display works, especially the breathing aspect.
Regarding using the Active Display to wake up a non-locked screen instead of the power button, I was actually curious to see if there were others who are adjusted to using the Active Display for this purpose and now prefer it over the power button.
Otherwise, I'm now really excited to go demo it tomorrow and see for myself how it works.
Cheers.
I nearly always use the screen gesture to turn on the display, usually to the home screen.
When you move the Moto X at all (I usually just tap it so it rocks to one side on the curved back, or "twist" it slightly while it is laying on the table) the active display comes up. This is usually just to check the time. You can also hold on the unlock ring and see some of the details for the current pending notifications. For example, if Fenix has a notification, I can hold the unlock ring and see the first few bits of the notification to see if I really want to unlock for that or not.
From there I can let go (nothing happens), swipe up to open Fenix, swipe down for home screen, or swipe left/right to clear that notification from Fenix.
You will get used to AD very quickly.
I didn't even think about this phone missing an LED notification. I've got an S3 as well and always have depended upon the different colors to let me know when i get a message/email, etc across the room or my desk while on the charger. I suppose I won't be charging as much anymore but its nice for those that don't keep their phone in their pocket all day. I don't always feel vibrations and am just used to depending on the LED light.
rotorocker said:
I didn't even think about this phone missing an LED notification. I've got an S3 as well and always have depended upon the different colors to let me know when i get a message/email, etc across the room or my desk while on the charger. I suppose I won't be charging as much anymore but its nice for those that don't keep their phone in their pocket all day. I don't always feel vibrations and am just used to depending on the LED light.
Click to expand...
Click to collapse
Yeah, little things like that are borderline panic worthy for some of us. TBH, I find that on average friends who have iPhones take a decent while longer to get back to me than those with Android phones or even Blackberries. Why? Because if they miss a call, sms, or email there's no way of knowing unless they actually physically touch there phone. At least this was the case last time I checked or of course they can always enable "LED Flash for Alerts"....smh.
So coming back to the topic - I gave it some thought and feel like this Active Display is probably an even better option than LEDs.
Instead of the LED notifications on our GS3s lighting up in different colors (the correlation of which I still haven't memorized even to this day), we'll now have Motorola's Active Display which allows for "breathing" when there are notifications. What this does is cause your screen to flash every couple of seconds with notification information. This is awesome because at a glance you'll now know exactly what's going on. So if you're like me and like it when your nearby phone let's you know you may have missed a call, sms, or email then this seems like it'll be quite useful. You also have the option of turning the "breathing" off at night along with managing which apps you wish to work with the AD.
At least I hope that is the case because I've never really spent a lot of time with a Moto X (only briefly on one of my friend's). So for those who are AD vets if I said something that's off please correct me.
This video also helped me understand how it works a little better (so hopefully it'll help you and others who are in the same boat):
This new AD is great and all but a lot of the time when my phone is charging at a friends house or at work, it's across the room. So I don't see anything but an LED helping me track the state from there. I'm still going to get the new phone and figure out how to deal with the difference but I think it's a stupid miss on something obvious from the manufacturer. But what do I know? Maybe it was part of the reason to keep the cost down.
rotorocker said:
This new AD is great and all but a lot of the time when my phone is charging at a friends house or at work, it's across the room. So I don't see anything but an LED helping me track the state from there. I'm still going to get the new phone and figure out how to deal with the difference but I think it's a stupid miss on something obvious from the manufacturer. But what do I know? Maybe it was part of the reason to keep the cost down.
Click to expand...
Click to collapse
Don't think we'll need to be charging our Turbos at a place other than the comfort of our own personal nightstands given the battery capacity we're getting here.
Otherwise, yeah, LEDs are nice to have for when your phone is in a non-nearby situation and you wish to quickly glance at it for an update.
After playing with the Lollipop build for a while on the Moto X 14, I think for me the biggest thing that will take the most getting used to on the N6 is not having Moto display. Sure Googles implementation is OK, but no where near as useful ad Moto's.
Cant beat picking up the phone and having your messages show up. Or better yet waiving your hand over the display to light it up.
This and moto assist are the only reason I may hang on to my Moto X 14. I use the hand wave feature frequently. Way more than i thought i would. Moto assist for driving and at home is so convenient. It's like having Amazon's echo wherever you are. Sure the N6 has always listening but I don't think you can answer phone calls and reply to messages hands free.
If the moto apps can be hacked to work on the N6 I may go for it.
jmill75 said:
Cant beat picking up the phone and having your messages show up.
Click to expand...
Click to collapse
That's how it works on the N6.
Try agent app. That's a good replacement for talking and replying back to texts while driving. Dynamic notifications is almost exactly like moto display
Sent from my XT1053 using Tapatalk
I need to get a new phone, and the only thing keeping me from the Nexus 6 is the lack of Moto Display/Moto Suite/Moto Voice, etc. I've yet to hear from a 2014 Moto X user who says that they wouldn't miss it.
The way it works on the nexus is when you pick up the phone the active display turns on. The same as the moto
magestic1995 said:
The way it works on the nexus is when you pick up the phone the active display turns on. The same as the moto
Click to expand...
Click to collapse
The Moto X's active display also pulses like a notification LED, and you can also just wave your hand over it to get it to turn on.
_MetalHead_ said:
The Moto X's active display also pulses like a notification LED, and you can also just wave your hand over it to get it to turn on.
Click to expand...
Click to collapse
The N6 version pulses as well, so it's only missing the wave function.
Credit & Thanks to biggiestuff for the following:
"Ambient display looks similar but in no way is close to moto display. Moto display uses the low power contextual processor in order to save battery. Ambient display uses the amoled ability to fire up specific pixels in order not to waste battery. The minute you interact with ambient display the screen fires up 100 percent. Moto display let's you interact without ever using the primary processor until you unlock. It's a step in the right direction but not there just yet."
Battery impact will be substantially greater.
l_stevens said:
Credit & Thanks to biggiestuff for the following:
"Ambient display looks similar but in no way is close to moto display. Moto display uses the low power contextual processor in order to save battery. Ambient display uses the amoled ability to fire up specific pixels in order not to waste battery. The minute you interact with ambient display the screen fires up 100 percent. Moto display let's you interact without ever using the primary processor until you unlock. It's a step in the right direction but not there just yet."
Battery impact will be substantially greater.
Click to expand...
Click to collapse
Uuhm... i'm sorry.... but i'd personally be questioning biggiestuff's basis for his comment. Watch video's of "Moto Display", and then watch the video of Ambient Display. There is physically no difference as to how one functions compared to the other. In Lollipop's Ambient Display, you get the typical Lollipop notification look, with the notifications showing up under the clock, also saying what the notification is, what was said in the text message, etc... When you interact with a particular notification, yes, the display turns on completely. Then look at "Moto Display". Yes, you can touch the screen to "interact" with them... but with either system, the display has to be turned on to do anything more than that. Only difference i can see is that Moto Display uses less pixels, since it only lights up up to 3 circles with the app icon in the middle, unless you have more than 3 notifications.... at which point you get a menu-like notification as the 3rd one.
Long story short...
Ambient Display = notifications are displayed on screen, and interacting with them (to see your list of e-mails/texts received, or opening the app directly from the notification) powers the display on completely.
Moto Display = Notification icons are displayed on screen. Interacting with those allows you to see what the notification says. Interacting FURTHER powers the display on completely to open the app so you can do what you need to do.
No difference at all power requirement wise (except for the minuscule amount of power needed for the couple extra pixels in Ambient Display) that i can see.
elementaldragon said:
Uuhm... i'm sorry.... but i'd personally be questioning biggiestuff's basis for his comment. Watch video's of "Moto Display", and then watch the video of Ambient Display. There is physically no difference as to how one functions compared to the other. In Lollipop's Ambient Display, you get the typical Lollipop notification look, with the notifications showing up under the clock, also saying what the notification is, what was said in the text message, etc... When you interact with a particular notification, yes, the display turns on completely. Then look at "Moto Display". Yes, you can touch the screen to "interact" with them... but with either system, the display has to be turned on to do anything more than that. Only difference i can see is that Moto Display uses less pixels, since it only lights up up to 3 circles with the app icon in the middle, unless you have more than 3 notifications.... at which point you get a menu-like notification as the 3rd one.
Long story short...
Ambient Display = notifications are displayed on screen, and interacting with them (to see your list of e-mails/texts received, or opening the app directly from the notification) powers the display on completely.
Moto Display = Notification icons are displayed on screen. Interacting with those allows you to see what the notification says. Interacting FURTHER powers the display on completely to open the app so you can do what you need to do.
No difference at all power requirement wise (except for the minuscule amount of power needed for the couple extra pixels in Ambient Display) that i can see.
Click to expand...
Click to collapse
No, it's different. With the Moto X, you can interact with the screen and view the notification without the phone actually turning on, whilst still only using the low power contextual processor. You can't respond to it, but you can view it. And again, unless you physically unlock the device, it is all done with the low power contextual processor while the phone is technically still asleep. With the N6 and Ambient Display, the moment you touch the screen it wakes up the phone, lights up in full color and uses the full power processor. There is a reason why when you use Ambient Display the standby battery life gets chopped by about 25%. Check out the specs sheet for the N6- Standby time is 330hrs with Ambient Display off, and 250hrs with it on. http://www.google.com/nexus/6/
_MetalHead_ said:
No, it's different. With the Moto X, you can interact with the screen and view the notification without the phone actually turning on, whilst still only using the low power contextual processor. You can't respond to it, but you can view it. And again, unless you physically unlock the device, it is all done with the low power contextual processor while the phone is technically still asleep. With the N6 and Ambient Display, the moment you touch the screen it wakes up the phone, lights up in full color and uses the full power processor. There is a reason why when you use Ambient Display the standby battery life gets chopped by about 25%. Check out the specs sheet for the N6- Standby time is 330hrs with Ambient Display off, and 250hrs with it on. http://www.google.com/nexus/6/
Click to expand...
Click to collapse
Yes..... but on the other hand.... they've actually gone ahead and POSTED their estimated battery life with it on and off. Looking at the Moto X, all you get is "24 hours mixed usage". Nothing saying what to expect with Moto Display on or off. I'd assume it probably kills the battery just as much... but i couldn't find a review that tested battery life with it on and off.
Again.... with Moto Display, you get notification circles.... only showing the app icon. You touch the icon, and you get what the text message says and who it's from, or what the e-mail you received was about. You can then slide your finger up to the app icon again to unlock the device, turning the screen on fully, and opening up to that message.
With Ambient Display, it's no different from the standard lock screen with the notifications showing, aside from it using only the required pixels. The ONLY difference between it and Moto Display is that for Moto Display, you have to touch the notification icon on the screen to see what the notification says, whereas with Ambient Display, when it turns on, whatever you'd really need to see is already there. Moto Display just adds one extra step to the process.
l_stevens said:
Moto display uses the low power contextual processor in order to save battery. Ambient display uses the amoled ability to fire up specific pixels in order not to waste battery..
Click to expand...
Click to collapse
This doesn't make any sense to me. Those two things are not mutually exclusive. Both Moto Display and Ambient Display take advantage of AMOLED's ability to only light up select pixels to conserve battery when displaying notifications. As for the use of a low power processor to save battery when displaying notifications, the Snapdragon 805 SoC has a Hexagon DSP built-in, so it's possible that the Nexus 6's Ambient Display is also using a low power processor to display notifications. It's simply too early to say that this difference exists between Ambient Display and Moto Display.
elementaldragon said:
Yes..... but on the other hand.... they've actually gone ahead and POSTED their estimated battery life with it on and off. Looking at the Moto X, all you get is "24 hours mixed usage". Nothing saying what to expect with Moto Display on or off. I'd assume it probably kills the battery just as much... but i couldn't find a review that tested battery life with it on and off.
Again.... with Moto Display, you get notification circles.... only showing the app icon. You touch the icon, and you get what the text message says and who it's from, or what the e-mail you received was about. You can then slide your finger up to the app icon again to unlock the device, turning the screen on fully, and opening up to that message.
With Ambient Display, it's no different from the standard lock screen with the notifications showing, aside from it using only the required pixels. The ONLY difference between it and Moto Display is that for Moto Display, you have to touch the notification icon on the screen to see what the notification says, whereas with Ambient Display, when it turns on, whatever you'd really need to see is already there. Moto Display just adds one extra step to the process.
Click to expand...
Click to collapse
I haven't really tested it on my 2014 Moto X yet, but I can tell you from personal experience with my 2013 Moto X that Active Display has pretty much zero effect on standby battery life. My 2013 loses about 1% overnight, and maybe 3-4% a day if I just let it sit. That's with or without Active Display being on. That's the whole point of the low power contextual processor, it can do these things (Active Display, Moto Voice) with negligible effect on battery life. It was designed that way. Judging from the stated specs of the Nexus 6, it doesn't seem like they had Ambient Display in mind when designing the hardware. I mean, an 80 hour hit to standby battery life is pretty substantial.
As far as the information that's displayed is concerned, I can't really comment on it because I have no experience with the N6. But it does seem that you are correct in that it displays the same or similar information, albeit with one less step. In my point of view, that's actually a bad thing because it brings up some privacy concerns. The Moto X just pulses the type of notification for all to see- if you want to see the contents of it, you need to physically interact with the display. The N6 with Ambient Display, actually pulses the content of the notification which I'm not so keen on.
In the same boat. The Moto features truly change how one uses a phone. Am worried by getting the N6, that I'd miss these features a great deal.
Waste of a click
Anyone have the screen shot of the moto x2014 lollipop updates before they took it down? Even Motorola somewhat acknowledge that ambient display drains more than moto display. Moto x 2014 will have ability to use both.
Sent from my XT1053 using Tapatalk
What are the odds of the moto features becoming available for the N6, either from porting or moto directly making them available?
johnchad14 said:
What are the odds of the moto features becoming available for the N6, either from porting or moto directly making them available?
Click to expand...
Click to collapse
If they haven't been done by now, I'd say the chances are slim. What features are you looking for. There are solid alternatives but I agree with most that Motorola's implementation has much tighter and cleaner integration. I actually gave up on my nexus 5 for a moto x. I probably would have ended up with the new moto x if it wasn't for that tiny battery.
Sent from my XT1053 using Tapatalk
You think some build prop. editing would allow moto suite to work? That is the main advantage of Nexus devices. Tinkering ?
Hi,
I use moto display without gesture detection. When i receive a notification (mail, text message, ...) the screen turns on and slowly turns off which is the expected behaviour. But then the screen keep turning on/off indefinitely until i open the notification or dismiss it.
Do you have the same behaviour ?
Moreover this behaviour is not linked to any phone mouvement as it is just laid on the table without any vibration that could wake it up.
It seems to me that this new bahaviour appeared with MM.
Either you disable Moto display for notifications or slide the unlock icon to the right so it will dismiss the notification on moto display but not on the notifications bar.
Yes, but do you confirm that this is the expected behaviour ?
I thought it was supposed to turn the screen on just one time and not to turn my screen into a christmas tree. Moto display is supposed to save our battery life, not sure it is going to reach that target with this behaviour, especially with a screen that is not an amoled...
MyGoul said:
Yes, but do you confirm that this is the expected behaviour ?
I thought it was supposed to turn the screen on just one time and not to turn my screen into a christmas tree. Moto display is supposed to save our battery life, not sure it is going to reach that target with this behaviour, especially with a screen that is not an amoled...
Click to expand...
Click to collapse
It's gonna pulse every minute or so for about 10 minutes I believe. Then it stops. If your phone is face down, it won't pulse at all.
Thanks for your feedback, too bad that we can't configure it, it's way too long by default imo.
I had a problem with the Lollipop and now the MM versions of the Moto Display. You can dismiss the notification, but it will start pulsing again for the same notification a little while later, with nothing new happening. Wasn't too bad with Lollipop, because I just switched to Ambient display which worked perfect. Now Ambient is gone for some reason.
mvmorr01 said:
I had a problem with the Lollipop and now the MM versions of the Moto Display. You can dismiss the notification, but it will start pulsing again for the same notification a little while later, with nothing new happening. Wasn't too bad with Lollipop, because I just switched to Ambient display which worked perfect. Now Ambient is gone for some reason.
Click to expand...
Click to collapse
I've checked, i don't have this behaviour on my side, once the notification is dismissed it stops pulsing... i don't understand how it can be different from one phone to another.
Edit : How did you switch to Ambient display btw ?
I haven't found a way to switch to Ambient on MM, you can only turn off Moto Display which gives you no notifications at all! It was easy with Lollipop, just go to the Moto settings and choose which display version you want.
Well it could be acceptable to turn it off with a notification led...
mvmorr01 said:
I haven't found a way to switch to Ambient on MM, you can only turn off Moto Display which gives you no notifications at all! It was easy with Lollipop, just go to the Moto settings and choose which display version you want.
Click to expand...
Click to collapse
Maybe unfortunately for some, Motorola got rid of Ambient Display in MM.
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/108823
For actions, I have approach for moto display turned on.
Under display, notifications are turned off.
As I understand it, the phone should wake by wave, but _NOT_ wake up the display when notifications come in.
Instead, i'm not getting it to wake by wave. The only way it'll wake by wave is if the notifications are turned on under display (in moto assist app).
gpz1100 said:
For actions, I have approach for moto display turned on.
Under display, notifications are turned off.
As I understand it, the phone should wake by wave, but _NOT_ wake up the display when notifications come in.
Instead, i'm not getting it to wake by wave. The only way it'll wake by wave is if the notifications are turned on under display (in moto assist app).
Click to expand...
Click to collapse
I've noticed that too. You're not alone.
<eye roll> Why even have the options like that. Seems they put an AND statement rather than an OR in the code.
I may have a partial workaround. The notifications wake allows you to set a time window when notifications are NOT shown. I set it from 00:00 to 23:59. This keeps the phone from waking for every notification and keeps the wave to wake functional.
So, I took this a step further.
I left the time interval in place as mentioned above (12:00am to 11:59pm). This prevents the screen from turning on for each notification alert.
I was bothered by how sensitive the prox sensors were. Bring your hand anywhere near the phone and it lights up.
Disabled the approach to wake option in moto display. The display still lights up but it now requires some form of movement such as picking it up, rotate/twist, etc. It's not perfect, but gets the job done.
I was annoyed by the approach thing always lighting up my screen too. I have found that I do like the screen coming on when I move the phone though. Just bumping it lightly is sufficient to light up the screen.
If my phone is flat, facing up, and I walk near it or wave my hands over it, the screen turns on. Not sure if this is an Android MM issue or a setting within the phone but I want to turn that off. Any ideas?
Turn it off? It's such a great feature that Google straight up ripped it off from Moto...
Bit anyways...open the "Moto" app and look under gestures
Sent from my XT1650 using Tapatalk
Metfanant said:
Turn it off? It's such a great feature that Google straight up ripped it off from Moto...
Bit anyways...open the "Moto" app and look under gestures
Sent from my XT1650 using Tapatalk
Click to expand...
Click to collapse
LOL, it spooks the sh1t out of me. Like its on the desk next to me while I'm working and I'll look at it and its like "oh, you must want to know the time".
its one of the main features of this phone and its predecessors, and a big reason why myself and others would buy a motorola phone . Its called ambient display and it takes the place of a notification light by turning on at regular intervals when you have a notification like a text message. It will also turn on when you get close, or when you pull it out of your pocket, so you can see if you have any notifications or just check the time. since its an AMOLED screen, its only turns on the pixels of the white font, and any black area is "off", so it doesnt completely wake your device every time and kill your battery. its a very useful feature and i would suggest giving it a shot. if you get used to it, its super handy
Moto gestures are one of my main reasons to get a moto device. That and I can have nice hardware without Touchwiz. Love the 3500mah battery in my force.