Database Users

Please Help

I was using the stock rom...rooted with z4root and thn i flashed my device using indroid v4 but i was facing stucking problem my cell stuck whenever i open app and do something..
thn i flashed my cell with kyrillos v6 all went well but while reboot the android logo keep moving thn it stuck suddenly..i reboot the cell its reboot and runnning good but i am still facing the stucking problem...how to solve it..??

I think it's wrong section.
Anyway, try to flash stock rom (JPM or JPQ) and then wipe data, cache and dalvik-cache. Then try to install other roms like InDroid or Kyrillos.
Did you follow all instructions while you were flashing a rom?

yeah i follow all instruction and frm where i can get stock rom..?

http://forum.xda-developers.com/showpost.php?p=15493588&postcount=5
Base ROMs section.
Or: http://forum.xda-developers.com/showpost.php?p=13482188&postcount=1

please help me out i m in trouble..

need help
is there anyone...?

hadi_xman said:
I was using the stock rom...rooted with z4root and thn i flashed my device using indroid v4 but i was facing stucking problem my cell stuck whenever i open app and do something..
thn i flashed my cell with kyrillos v6 all went well but while reboot the android logo keep moving thn it stuck suddenly..i reboot the cell its reboot and runnning good but i am still facing the stucking problem...how to solve it..??
Click to expand...
Click to collapse
hi
if u can get into the download mode good
use odin and flash one of the official stok roms JPM is supposed to be good
u can download safe stok firmware from here :
http://forum.xda-developers.com/showthread.php?t=1063940
goodluck

i am done u..i flash with kyrillos v6 (non-oc) and my cell is running great..
THANKS FOR YOUR HELP GUYS...!!

Kyrillos ROM 7.0

Hi Guys,
I tried to flash the phone with kyrillos rom 7.0 OC Version but my phone freezes at initial screen GT5801 and can listen cracking booting sound.
I tried to re flash it but again the same thing happened. Do any one have the solution for this problem.
Thanks In Adv.

Use the non Oc version because oc can freeze your phone.
Sent from my GT-I5800 using XDA App

dilzo said:
Use the non Oc version because oc can freeze your phone.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Thanks dilzo . I tried to again flash the phone with JP2 official .tar downloaded from samfirmware. But that is again getting freeze after Samsung booting animation.
Should i again reflash it with non OC version. There are two part of Kyrillos rom. If you extract the first part the second part also get extracted. Please correct me if i am wrong.

Make wipe data after flashing when phone boot ino CWM. If this won't help, flash non-oc version, wipe data, then flash oc kernel (is in the kyrillos zip in "extras" folder - i don't remember exactly)

Last time i had v4. Now I am trying to install v7 but first time it got freez at SAMsung boot screen, with non OC version I am getting freez after samsung boot screen. After flashing I wiped calvik cache or what and the cache patrition.

Boot loop WeUI with IcyGlitch.

I was running Dark_knight v3 and wanted to try out the new aroma-installer, so I flashed with default settings, rebooted, and now nothing.
Phone is currently stuck on a boot loop, and I cant get into recovery.
Download mode works, so should I flash stock 2.3.6 ?
Im on a mac so a tutorial on how to use Heimdall would be nice.
Or is there another way ?

I had a bootloop after a couple days use of this ROM. Ended up back on Team ICSSGS after flashing a stock ROM with Odin.
Someone suggested the link below after I had already flashed stock. Perhaps try this link & then flash weUI again.
Check out the heading on link below: Phone is in boot loop can't get to Recovery (I9000)
http://ics.samsung-updates.com/trouble/

Just go to download mode, flash the file i attached on PDA area with Odin and repartitionand autoreboot both unticked. Reboot manually with the 3 botton combo( Vol up + power + home) and reflash icy glitch kernel. If it is still stuck on a bootloop reflash Rom!
Sent from my glory GT-i9000 with CM11 with ice djent sandwich and Icy Glitch OC at 6,5 GHz

carlosdrums11 said:
Just go to download mode, flash the file i attached on PDA area with Odin and repartitionand autoreboot both unticked. Reboot manually with the 3 botton combo( Vol up + power + home) and reflash icy glitch kernel. If it is still stuck on a bootloop reflash Rom!
Sent from my glory GT-i9000 with CM11 with ice djent sandwich and Icy Glitch OC at 6,5 GHz
Click to expand...
Click to collapse
Sorry, this is the file, http://db.tt/fVlJA3WD
Sent from my glory GT-i9000 with CM11 with ice djent sandwich and Icy Glitch OC at 6,5 GHz

Thanks for your advice guys.
I got recovery working again, flashed the rom again and again, but it just wouldnt work.
Used Odin to flash 2.3.4, Speedmod kernel, and now Im back on Dark Knight again.
Thx again.
J.

I've Tried the following but still doesnt work Pls. advise

Hello every one.. heres my problem. im stuck in SAMSUNG GALAXY Note logo..but i CAN access thru both CWM and Download:
Heres the list that ive tried based on what ive read from posts but didnt work:
- flash stock GB and pre-rooted LC1 via pc Odin.
- flash KJ1 via pc odin
- flashing with kies and without kies
- flash prerooted rom with pit repartition ticked..
- wipe data thru CWM
the story was .. im trying to flash a ROM based on LPY then suddenly after booth i get stuck at samsung logo.. can someone pls. advise me what to do...im really worried.. thank you..

What Rom were you on before
Sent from my GT-N7000 using xda premium

indie said:
What Rom were you on before
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
LPY then i was trying to flash Midteam 1.2... wipe data then i got stuck suddenly..after that i tried to flash a pre rooted GB rom and still didnt work..

alucard8888 said:
LPY then i was trying to flash Midteam 1.2... wipe data then i got stuck suddenly..after that i tried to flash a pre rooted GB rom and still didnt work..
Click to expand...
Click to collapse
did you do it via CWM app? i've had a softbrick as well while using that
try enter recovery via Vol Up + Home + Power button ....
after that try install once again the zip file
as of for me, fixed my softbrick just now by flashing back my nandroid 2.3.6 backup

What was the result of PC odin flash? Did it get stuck at factoryfs.img?

zekurosu said:
did you do it via CWM app? i've had a softbrick as well while using that
try enter recovery via Vol Up + Home + Power button ....
after that try install once again the zip file
as of for me, fixed my softbrick just now by flashing back my nandroid 2.3.6 backup
Click to expand...
Click to collapse
yes i flash it via CWM but now i can only access CWM orig..

anilisanil said:
What was the result of PC odin flash? Did it get stuck at factoryfs.img?
Click to expand...
Click to collapse
result flash via PC odin success=1 / failed=0 .. but after reboot im still stuck at the samsung logo

Are u flashing with a PIT file with pc odin? Sounds obvious but someone i helped before had a similar problem when using a 32gb pit file with a 16gb note
Sent from my superior Nokia 3210 using XDA Premium Plus Legacy Edition

Maybe
alucard8888 said:
result flash via PC odin success=1 / failed=0 .. but after reboot im still stuck at the samsung logo
Click to expand...
Click to collapse
I believe you did not do a factory wipe after your GB from PC Odin boots, right?
Because the GB flash via PC Odin only put the necessary files into your phone, the residue data from your previous Rom is still in it, upon boot, your system read theses data and do not understand some residue instructions, therefore you are stuck.
Just do a full wipe and cache as well... try it and let me know if I am right?

nuclearmonkeyuk said:
Are u flashing with a PIT file with pc odin? Sounds obvious but someone i helped before had a similar problem when using a 32gb pit file with a 16gb note
Sent from my superior Nokia 3210 using XDA Premium Plus Legacy Edition
Click to expand...
Click to collapse
yes ive flash with pit with 16gbpit file.. cause my note is 16gb..is that right?

lewisteo said:
I believe you did not do a factory wipe after your GB from PC Odin boots, right?
Because the GB flash via PC Odin only put the necessary files into your phone, the residue data from your previous Rom is still in it, upon boot, your system read theses data and do not understand some residue instructions, therefore you are stuck.
Just do a full wipe and cache as well... try it and let me know if I am right?
Click to expand...
Click to collapse
after flashing stock GB after reboot stuck.. then go thru CWM to wipe data successfully wipe and complete.. but after i reboot the system.. im still stuck on logo.. im tryin to think if flashing cf root via odin then flash abyss4.2 kernel then flash an ROM LPY based.. do you think it will work?

After flashing the STOCK GB (very imp)
Get into the stock recovery by pressing vol up+ home+ power button and do a factory reset, you are good to go.
Edit: Do not flash Abyss yet, you would get a yellow triangle.
Also first boot takes sometime, how long are you waiting before trying again. Just do a factory reset on stock GB rom, power off, remove the battery and wait for sometime. Put the battery and boot again! It may take some time but it should boot.

anilisanil said:
After flashing the STOCK GB (very imp)
Get into the stock recovery by pressing vol up+ home+ power button and do a factory reset, you are good to go.
Edit: Do not flash Abyss yet, you would get a yellow triangle.
Also first boot takes sometime, how long are you waiting before trying again. Just do a factory reset on stock GB rom, power off, remove the battery and wait for sometime. Put the battery and boot again! It may take some time but it should boot.
Click to expand...
Click to collapse
after flashing Stock GB successfully and waitin for it to pass samsung logo i think 30mins+... so ive tried to go to recovery then wipe data.. after that it reboots waiting again to pass to samsung logo but no luck...
but i will try it once again.. flash stock gb from sammobile and wait ...thank you

alucard8888 said:
after flashing Stock GB successfully and waitin for it to pass samsung logo i think 30mins+... so ive tried to go to recovery then wipe data.. after that it reboots waiting again to pass to samsung logo but no luck...
but i will try it once again.. flash stock gb and wait ...thank you
Click to expand...
Click to collapse
30 minutes is like too long. Just try one more time and see or flash a different ROM, a wipe one, preferably?
If the PC Odin is flashing it successfully, then you do not have to fear, all is well

anilisanil said:
30 minutes is like too long. Just try one more time and see or flash a different ROM, a wipe one, preferably?
If the PC Odin is flashing it successfully, then you do not have to fear, all is well
Click to expand...
Click to collapse
ok i will try to flash KL8 a wipe Rom from dr. ketan's thread.. thank you

Flashing problem

Several days ago i try to flash (without success) Merruk kernel.After that incident (LOL) I was flashed stock rom nd start to flash JBv3.I followed the procedure step by step (that was my 3th time flashing JB),But i stucked in S.logo :silly:
After that i contact Percy215 nd bro is advised me to flash JB from stock recovery.And it worked! :silly:
Then i flashed White's kernel 1.2.0
So,my dear friends-what hapening with CWM recovery (CWM bla bla,....)whether the costume kernel modify stock recowery even after flashing a stock rom.
After all that i'v flashed again stock rom and then Repencis 3.5 in the same way-through Stock recowery.
And the question is: what to do next time (i'm gona try USSR v8) ??????:silly:

Whites an d other kernels like merruk,hells come witj their own cwm recoveries.
So if you want to boot into stock recovery you need to flash stock kernel or kernel like kuros which has stock recoveries and temporary cwms

Fawkes... said:
Whites an d other kernels like merruk,hells come witj their own cwm recoveries.
So if you want to boot into stock recovery you need to flash stock kernel or kernel like kuros which has stock recoveries and temporary cwms
Click to expand...
Click to collapse
Man, i was flashed those 2 roms (JB and Repencis) from Stock recovery which means that i was on stock rom before flashing those costume roms.I know that those kernels has their recoverys (permanent recoverys)
Totally weird situation !!

Where is the problem then?
For what you opened new thread?

When cwm is not working ' stock recovery should do the trick
Sent from my GT-S5360 using xda premium

Fawkes... said:
Where is the problem then?
For what you opened new thread?
Click to expand...
Click to collapse
I opened this treat because i cant use CWM (permanent or temporary) any more.

pustinjak said:
I opened this treat because i cant use CWM (permanent or temporary) any more.
Click to expand...
Click to collapse
OK wat happens when u flash cwm in stock recovery?
And please don't speak in baby language
(Unless u duno English properly. Then its OK u revert trying ur best)

pustinjak said:
Several days ago i try to flash (without success) Merruk kernel.After that incident (LOL) I was flashed stock rom nd start to flash JBv3.I followed the procedure step by step (that was my 3th time flashing JB),But i stucked in S.logo :silly:
After that i contact Percy215 nd bro is advised me to flash JB from stock recovery.And it worked! :silly:
Then i flashed White's kernel 1.2.0
So,my dear friends-what hapening with CWM recovery (CWM bla bla,....)whether the costume kernel modify stock recowery even after flashing a stock rom.
After all that i'v flashed again stock rom and then Repencis 3.5 in the same way-through Stock recowery.
And the question is: what to do next time (i'm gona try USSR v8) ??????:silly:
Click to expand...
Click to collapse
if you want to flash ussr8 .
just do the procedure of flashing that rom. the tut is posted on ussr thread
no matter youre using white kernel or any kernel which directly goes to cwm recovery.
if you want to flash ussr9. you have to go back to stock kernel first or those which has stock recovery first because that rom (ussr9) has no kernel and your previous will be the one to be used.

here is the best answer,,
if u r in USSR any verision,,people forget to reboot into recovery after installing the room-----this is important (in CWM go to advance reboot recovery then wipe data and cahe) then reboot,,
in hyperion stock recovery is the best to use,, i used this many time w/o single bootloop.
note:doesn't matter if u are in stock or custom rom
note: if u are using CWM always mount system and data

sanny5 said:
OK wat happens when u flash cwm in stock recovery?
And please don't speak in baby language
(Unless u duno English properly. Then its OK u revert trying ur best)
Click to expand...
Click to collapse
Man :laugh:,when i wrote that answer it was early morning in my city(3 am).
Btw,when i flash cwm i get cwm-nothing special,in cwm i can chose camands (wipe/advanced/mount/install,...).So i can use CWM but result is always same-samsung logo
p.s.
u wrote "wat" insted of what bro hehehe

kimerika said:
here is the best answer,,
if u r in USSR any verision,,people forget to reboot into recovery after installing the room-----this is important (in CWM go to advance reboot recovery then wipe data and cahe) then reboot,,
in hyperion stock recovery is the best to use,, i used this many time w/o single bootloop.
note:doesn't matter if u are in stock or custom rom
note: if u are using CWM always mount system and data
Click to expand...
Click to collapse
Today i was try to flash Repencis.I followed OP's instructions (wipe/mount/install/wipe,...)-still same thing hapends.Phone is at Samsung logo about 20 min.