Related
While rooting the phone will allow for all sorts of stuff I am mostly interested in getting past the second NAI check Sprint has (which was easy to do with the Instinct.) I found some directions at http://www.insiderforums.com/forums/showthread.php?t=31642 but these aren't working right for me. Perhaps someone else can give them a try?
Also, when I bought my Hero from Best Buy I did get a sheet of paper with the phones "password" on it. I thought this was the MSL but it doesn't work to actually unlock the ##DATA# editing (though put in by itself it will show the ESN info.) If this isn't the true MSL what can I tell Sprint is the reason for giving it to me? (A factory reset use to be a good excuse but this is built-in command on the Hero.)
Thanks.
Hi, I finally got my MSL, so I'm going to try this now...will report back with the results.
Also, I got my MSL today by doing an ecare chat session, and told her that I was having problems with my voicemail, and that I'd like her to walk me through a manual provision so we could properly set up my number and MSID number. She didn't ask any suspicious questions, just helped me and immediately gave me my MSL.
EDITS:
-So far I have a different version of QPST, and it didn't recognize my hero, so I'm downloading his new version. will post back soon.
-I put the new build of QPST on my Vista machine, and it still doesn't recognize my phone model. I can add the USB port (on mine COM 8) but it still says unknown phone...crap. I'm going to try it at home on my XP Machine to see if that makes a difference. Will post back with results.
-Tried on an XP laptop we have here at the office. Still no go. It's not recognizing my phone model. I see that you posted exactly the same thing I'm seeing in that forum. Want to relay that to him? I don't have an account. Also, I COULD get into it on my other version of QPST, however, I just chose one of the umpteen models in there, none of which applied to my hero. They were all like "FFA-1330" and stuff like that. Nothing hero looking. I noticed when doing some more research that this can happen with older versions of QPST. Wondering if a newer version would make a difference, or maybe Chris is using a different version than 2.7.301.
-Found a newer version of QPST, version 2.7.323, downloading now at a painfully slow rate.
JACKPOT!
This version of QPST properly works and found my phone as a "FFA/SURF 7600" phone. I'm now following his guide to see if I can't get it to work.
Since this was a success, I felt it should be in another post
EDIT:
OK, so I followed his guide, copied my NAI into tethered NAI, and when choosing "Write to phone" I got a write error reported. It states under the NV Item column "NV_UE_IMEI_I" and under the Status column "NV_READONLY_S"
When I again chose to read from phone, it seems that the change is still in there. I'm going to do the all important test, and will report back as to if it actually works. I'm giddy like a schoolboy right now.
--Well, I still get the error 67 and error 65, so it appears it didn't work. Phooey. I'm still going to mess with it more to see what happened. I felt good about it, and maybe there's still some hope.
Same. I updated both Profile 0 and Profile 1. Same "read only" error but after a reboot, update profile, and rerunning QPST the changed values appeared to be there but still 65/67 errors.
Any one else try this yet?
Just wondering if any one has any luck with this now? I am downloading QPST now.
It would be great if someone who already has a grandfathered PAM ability for their Hero to try this and report what they are seeing. Also the output from ##DATA# to see what if anything there is different.
Same Thing
No Joy.
I just followed the same steps and had the same thing happen as kmartburrito.
I'll get this to work, I've enabled PAM on every sprint phone I've had since they introduced the unlimited data plan bout 5-6 years ago
we're going to get the MSL number and instead of writing to phone we'll just edit the settings in phone (safer than hard writing stuff that might screw with your MEID & ESN settings)
I'll post when I get it to work, just wanted to let yall know I'm hot on it.
**********************************************************
This is a modified guide I wrote for the instinct that will walk you through how to get your MSL code and what to do with it.
DISCLAIMER, I am ###NOT### responsible for any damage you do to your phone or your phone network with this information
**********************************************************
some uers still getting errors, if you fall into this catagory, you can recover via SPRINT RUU which will wipe your phone
ftp://xda:[email protected]rs.co...U_Hero_C_Sprint_1.29.651.1_signed_release.exe
---- How to access programming and service menus---
On your phone go to the dialer, then dail in any one of these codes below and after the last # you should get the menu or it will ask for "current code" aka your MSL #
##data# (##3282#)
##debug#(##33284#)
##diag#(##3424#)
##svn#(##786#)
##prl#(##775#)
##prev#(##7738#)
##akey#(##2539#)
##vocoder# (##8626337#)
-------How to get your MSL code---------------
1) download required 3rd party apps
download demo version of CDMA WORKSHOP from
http://www.cdma-ware.com
newest version of qpst 2.7b323
http://rapidshare.com/files/297770360/qpst.zip
download of sprint's official phone as modem (PAM) software
Smartview for Windows
http://www4.sprint.com/pcsbusiness/down ... s_1.16.exe
Smartview for Macs
http://www4.sprint.com/pcsbusiness/down ... c.mpkg.zip
download HTC Sync
http://www.htc.com/us/SupportDownload.aspx?p_id=300&cat=3&dl_id=716
2) install the HTC HERO DIAG drivers
http://rs79.rapidshare.com/files/293529424/HTC_Hero_DIAG_Drivers.zip
3)connect your phone via usb cable
4)dial ##diag# (##3424#) on your phone for diag menu, when prompted direct windows to diag drivers listed above
5)run CDMA WORKSHOP, settings at main screen on the right are as follows
com settings (AT mode)
---------------
Port (com#) <--- click port and it should say "HTC DIAG COM PORT"
Baud rate (115200) <--- use this setting
com settings (DM mode)
---------------
Baud rate (115200) <--- use this setting
6) you should now be able to hit <connect> if it was successful you'll see in status bar <connected to com#>
7) now click <read> after a moment all your info will come up on left panel, phone # etc
8) click on security tab change the right panel setting and look for the following block
SPC/User Lock
----------------
Defualt (nv_read) <--- use this setting
9)now click read if done sucessfully you'll see the block below this option flash red and give you a number
10)note the 6 digit number under <SPC/USER LOCK> the one that flashed red, ****this is your MSL number***
***** just an additional warning***** you can REALLY and I mean REALLY screw up your phone if you change one of the settings in those menus if you don't know EXACTLY what you are doing. This isn't for the faint of heart or the random tinkerer.... just be warned
;;;;;;;;;;;;;;;;;;;;;;
So in reading your post, it seems the only thing I haven't done is modify my profile 0 in qpst, since I've already modified profile 1 per the guide on insiderforums in the original post by gilroykilroy. Does all that sound correct?
Thanks for writing up that guide Johnson!
If I understand the directions johnsongrantr posted you are replacing the profile 0 NAI with the profile 1 NAI. I tried that and after it initially seemed to work it gave me error 67 when I booted my phone and tried to connect to the network and/or trying Update Profile.
Also note that my phone has [email protected] (not mcs.sprintpcs.com).
I seem to have better luck leaving the settings along and using the race-condition method.
Alas still no luck getting my Mac to recognize the phone connection.
Updated profile 0 as described but still getting error 65/67. Is there some other step to turning on the PAM other than in the setting "Mobile network sharing"?
Update:
Just tried to update profile: cannot update profile and get Error 67.
redcloud said:
Updated profile 0 as described but still getting error 65/67. Is there some other step to turning on the PAM other than in the setting "Mobile network sharing"?
Update:
Just tried to update profile: cannot update profile and get Error 67.
Click to expand...
Click to collapse
it worked on mine, but it may be something to do with your account.... you can recover via SPRINT RUU which will wipe your phone
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
UPDATE: the [email protected] is hcm, I wasn't paying attention, I'll try copying that over and see if I have the same results.... my [email protected] worked on my htc mogul as well... let me give it a shot though
UPDATE2:the number you deleted is your ESN in hex format you'll see it at the top right in service programming just replace it with "number"@hcm.sprintpcs.com and paste it in tethered NAI, sorry for any confusion
johnsongrantr said:
it worked on mine, but it may be something to do with your account.... you can recover via SPRINT RUU which will wipe your phone
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
UPDATE: the [email protected] is hcm, I wasn't paying attention, I'll try copying that over and see if I have the same results.... my [email protected] worked on my htc mogul as well... let me give it a shot though
UPDATE2:the number you deleted is your ESN in hex format you'll see it at the top right in service programming just replace it with "number"@hcm.sprintpcs.com and paste it in tethered NAI, sorry for any confusion
Click to expand...
Click to collapse
Nope, still 65/67 errors here with NAI and Tethered NAI of profile 0 being the same string:
[email protected]
There must be something else to change.
I've also tried this to no avail... tried a few different things:
1) tried replacing the Profile 0 NAI with the Profile 1 NAI
2) tried copying the Profile 1 NAI to the Profile 0 Tethered NAI
3) tried copying the Profile 1 NAI to the Profile 1 Tethered NAI
4) tried replacing all Profile 0 settings with Profile 1 settings
5) tried copying Profile 1 settings to Profile 2
Nothing seemed to help.... still errors.
Yep...same for me, I've updated the tethered NAI in both profile 0 and 1, reset the phone, waited for a half hour, and still get the error 67. Keep on brainstorming guys, we'll beat this thing
can anyone put the rapid share files up on a different server or sharing place, rapid share is terrible. plus i can't download. it says there are no more open slots to download from. i need the qspt and the drivers. thanks in adavance
WRMG3 said:
can anyone put the rapid share files up on a different server or sharing place, rapid share is terrible. plus i can't download. it says there are no more open slots to download from. i need the qspt and the drivers. thanks in adavance
Click to expand...
Click to collapse
Here you go man, this is to a zip file called "HTC Stuff" that has both QPST 2.47.323 and the HTC Diag Drivers.
http://www7.zippyshare.com/v/50608704/file.html
thanks man, i figured i would give this a try when i got home. rapid share for some reason wouldn't let me download it and kept telling me that i had to be a premium member to download the files.
have you had any luck getting this to work on your phone?
WRMG3 said:
thanks man, i figured i would give this a try when i got home. rapid share for some reason wouldn't let me download it and kept telling me that i had to be a premium member to download the files.
have you had any luck getting this to work on your phone?
Click to expand...
Click to collapse
Nope, no luck yet. I along with a few others have had the same resulting 65/67 errors after updating the NAI settings on both profiles, so still now it's a no-go. I don't know if it's working on anyone's CDMA Hero at this point, so we may have to wait until it is rooted, which I can only imagine when that will happen, although hopefully soon!
hi there i am tring to s off my phone but when i put in my beta key its saying invalid key
I was having the same problem and all I did was to start all over again, from scratch.
Reboot and try again...
I hope it works out for you.
and when you are typing your beta key watch for difference between 0 and O
Try under Win XP, under Win 7, I had the same problem.
Try it again or go in the alharev irc channel. these can help soy very good
Sent from my HTC Wildfire using XDA Premium App
when I entered my IMEI number that I found in the settings I got an invalid key. However when I ran the alpharevx tool, it gives your serial number too, and when I entered that one in the tool, I got a totally different key, which worked... I had watched out for 0 vs o problem but still I got a different key, so perhaps that will help you too...
I hope my s-offing will succes too.
Sent from [email protected] d()b
just use revolutionary instead of alprev.I had the same problem but with revo it works...........
boroboy69r said:
hi there i am tring to s off my phone but when i put in my beta key its saying invalid key
Click to expand...
Click to collapse
U need to look after Ur S/N when U pull out the battery of Ur device. I did that to be sure that it's the right serial number. And then U put that S/N in revolutionary site and U get Ur beta key. That's it.
is anyone else having this issue? we're typing in the serial # and beta key perfectly. we're not mistaking O's for 0's; 1's for I's, or anything. we are indeed choosing Windows and HTC Evo 4G on the website. we're doing everything absolutely perfect but it's still giving us an invalid beta key.
we're on hardware version 4.
learn how to copy and paste into command prompt.
we're doing that, still no go. absolutely nothing is working.
Double check the S/N that reports when you start the tool, just to make sure you are entering the same alpha/numeric the phone reports to the program. Use that S/N to generate your key.
I've been rooting phones all morning, hardware 003 and 004 with no problems at all.
Same here, I've done 3 today, with not a single problem to report.
cnstarz said:
is anyone else having this issue? we're typing in the serial # and beta key perfectly. we're not mistaking O's for 0's; 1's for I's, or anything. we are indeed choosing Windows and HTC Evo 4G on the website. we're doing everything absolutely perfect but it's still giving us an invalid beta key.
we're on hardware version 4.
Click to expand...
Click to collapse
From where are you getting your serials?
Deleted message
having the same issue can not get it to work at all i have tried it all!
the same
I got 2 rooted yesterday. and the one I was trying to do today, did not take at all..something is wrong somewere..
CMD
I dont know how comfortable you are with CMD but, What I did was use CMD prompt navigate to the folder and .exe for the revolutionary tool. Put in the command copy and then pasted it from the website. I put my folder on the desktop
Like this
CMD.EXE
CD users\whatever your name is here\desktop\what ever the folder name is
then revolutionary.exe
it launched found the phone and i pasted in what was needed by mouse and pressed enter and then the magic happened. Mileage may vary happy rooting
I had the same problem. You have to use the same key as provided with the download u can't download the program and go back for the key
Sent from my finally rooted EVO
I had this same problem, everything going smooth until running the revolutionary.exe and pasting the Beta key. Seems when you go to the revolutionary site for the key, the file that gets downloaded is attached to the key, so go ahead and unzip the file to your c: location again and when it asks, just copy and replace all the files and go through the steps and it should accept the Beta key this time and finish, it did for me. I hope this helps.
do you have the latest rev exe....there is a ver4 out.......
oski252 said:
do you have the latest rev exe....there is a ver4 out.......
Click to expand...
Click to collapse
That has to be the problem that I was having along with most of everything getting the error.
They/I was using version 3 revolutionary with the Key gen that's basically set for version 4.
No way for a old version to confirm key gen that isn't built in that tool.
This is the solution!
jokerinhand1119 said:
I had the same problem. You have to use the same key as provided with the download u can't download the program and go back for the key
Sent from my finally rooted EVO
Click to expand...
Click to collapse
THANKYOU!!! That's what I needed to do as I was using the revolution.exe from the zip I got from the larger zip from the root instructions. Once I used the v4 from the revolution site it worked like a charm! yea!
Another fix would be to try it on another computer. I was having the same issue on my Ubuntu laptop so I tried it on my Ubuntu desktop and it fire right on up. Hope this does help some that are still having problems. It work so don't give up and its really worth it .
Listen and follow closely i made a thread already how to fix this
When you generate your beta key it is imperative that u generate it from the same revolutionary zip you downloaded, the reason people get invalid key is 99.9% because it wasnt generated from the same revolutionary file downloaded,
2nd important its alot easier to copy the beta key in the box and paste to command prompt.
Do this by highlight, key in box , copy it, then open revolutionary.exe.
When the cmd prompt opens take your cursor to the top corner of cmd box and right click go to edit then paste, this is because the beta key is easily fudged up and case sensitive.
Remember to have the fast boot unchecked, usb debug on, and charge only on. And have the modified drivers installed
if fails re download the revolutionary for windows or mac or whatever comp your on and regenerate the key from that specific download and open the exe. From that one, and erase all others. You will get zerging root
then when done choose recovery in hboot then youll get a blue cwm screen choose install zip fine the su-2.3.6.3-ef gh signed.zip that should be on the root of your sd card, and install, that pushes the actual superuser to your device
now your rooted fully with cwm
I am trying to root a friends EVO, and it is not working for me either. I have tried everything listed here and still get invalid key.
Fastboot unchecked, Debugging on, New HTC driver as listed installed, Antivirus turned off, Phone on Charge only.
hopeless
EDIT: EVerything is fine, I finally read and comprehended that I was supposed to use the SERIAL# showing on the Revolutionary screen to enter in to generate the key. Once I was smart enough to figure that out, DONE!! Phone rooted and flashing AMONRA as I type. HOOAH!!
You have to put your s/n not anyone's else, make sure your not confusing o with 0. Capitals matter, I just rooted and it works.
Sent from my PC36100 using XDA App
If you can not get the generated beta key to work for the 2.3.3 revolutionary root, and it keep saying invalid beta key???
The fix is you must generate the key from the same revolutionary zip file you downloaded can not be used from different one and copy and past it from the beta key box, just hilight and copy then open the revolutionary.exe and put your mouse pointer at the top of the cmd box not in it, then right click scroll to edit then paste.
Remember 99.9% of invalid beta key response is because it has to be regenerated from a fresh revolutionary download and from the same one so , if all fails delete all your revolutionary downloads and start of and do the copy and paste.
I don't see how its a 'fix,' since that's how its supposed to be done from the beginning. I think most people are getting errors because the missed a value, or didn't get the letter case correct, because it IS case sensitive.
I have only downloaded the revolutionary tool once. I generate a beta key from the website for each phone s/n. I have rooted 6 GB EVO's w/o downloading a new .zip
v3 and v4 use different beta keys so you need to make sure your revolutionary tool is v4
Sent from my EVO 4G
Please help!!!!!
1. Should the serial number in the terminal box match the serial number on the phone?
2. I have tried all methods of the beat key and its still saying invalid key. SOo my question is, is there another way to get a beta key?
3. Is there any other way besides revolutionary to root the evo 4g?
If you guys can please answer these questions i would highly appreciate it.
Should the serial number in the terminal box match the serial number on the phone?
Yes
2. I have tried all methods of the beat key and its still saying invalid key. SOo my question is, is there another way to get a beta key?
Are you going to the website to generate the beta key? Someone above noted to copy the serial number from the command prompt. That saves yourself from typos.
3. Is there any other way besides revolutionary to root the evo 4g?
No
If you guys can please answer these questions i would highly appreciate it.
Sent from my PC36100
I can say that I tried my key a total of six times and got the invalid key response every time until I copied and pasted on the seventh.
I knew beforehand that it was case sensitive because this was the second Evo I rooted. My brother (his phone) and I both checked the characters every time and they matched every time. The first four times I tried from one download, the last two I downloaded separate files.
My theory is that for some unknown reason (im not smart at this stuff) when you first get an invalid key, it might continue to be invalid until you do the copy / paste.
Not sure if thats possible, but thats my guess.
He is right this is not a fix but actually how it is supposed to be done. Also I have used the same zip on multiple phones so that is a false statement. Now if all drivers are loaded up properly you will see your serial number in the cmd window. If that number is different than the one on the back of the phone you may have bigger problems but I would go with the one seen in the cmd box
Enter you info properly and the beta key that is produced can be copied and then as stated in the revolutionary thread- right click on the task bar of the cmd and click paste to enter your beta information. Much safer than writing it down and hoping you entered it correctly
One other things- If you have an older Evo with an older HBoot then you can try Unrevoked root method if not then yes you have to keep trying Revolutionary
If anyone needs help with this task PM me.
I never had any problems with the beta key it worked the first time .
Sent from my PC36100 using Tapatalk
pfcland said:
I never had any problems with the beta key it worked the first time .
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Most don't but a few do seem to have issues
hey, new to this but this seemed to work for me.. i verified (several times) on my phone, and everything on there said that my hboot version was 2.15.. (I even verified by powering down, holding the power/volume down button), and revolutionary still did not work.. but i noticed on the revolutionary exe. it said my phone had the 2.16, so i tried a different beta key with the 2.16 hboot option and now it seems to be working.. not sure if this helps.... worked for me..
help new phone i done this b4 no problem now it wont work
put in new sn got new key and wont go in ugh
I am having a slightly different problem, and I think its probably user error. I downloaded revolutionary-0.4prep4.zip and unzipped it into a new folder on my desktop. I tried running the 'revoluationary' application (double clicked it), i get a cmd box that flashes and disappears and that's it. What am i doing wrong or missing? Running windows7 64, dl'd the windows version. my phone is on and connected via usb.
Thanx
Try right clicking and running as administrator.. Did you also install the drivers, and is HTC sync installed
I did try running as admin. And I thought I had installed the drivers. I do have HTC Sync installed, too. I'll double check the drivers, though.
---------- Post added at 12:59 PM ---------- Previous post was at 12:53 PM ----------
tammerlane said:
I did try running as admin. And I thought I had installed the drivers. I do have HTC Sync installed, too. I'll double check the drivers, though.
Click to expand...
Click to collapse
Ok, I reinstalled HTC Sync and drivers just to be sure, ran revolutionary as admin, and it still flashes onscreen and disappears. I've even tried a different USB port, for whatever that was worth. My phone itself it is set to charge only, does that make a difference?
DO NOT HAVE SYNC IMSTALLED! You need to remove it and any other HTC thing installed when you installed sync.
SYNC causes issues with revolutionary.
You should download the drivers from the wiki which can be gotten to by the revolutionary site. They are all you need.
Sent from my PC36100 using XDA App
ack, that was it. thank you for pointing me in the right direction. problem solved!
tammerlane said:
ack, that was it. thank you for pointing me in the right direction. problem solved!
Click to expand...
Click to collapse
You guys have got to stop improvising and follow directions to the letter....It works believe me I have done quite a few phones already. Use the right drivers and it will work out for you... Good luck...
Ok people getting an invaled beta key. I mad the mistake of downloading the file and using the s/n from the back of the phone under the battery. That is not the sn you need. After you download the file and run it under admin it will ask you for the beta key. The serial number you need is the number right before the space provided for the beta key. In other words the serial number you need is in the comand prompt not on the phone.
Mine won't even get past the waiting for device, I'm using the same method that I used on my wifes EVO and mine before I took it in for a screen replacement. Only difference is I'm no longer using my laptop. I'm using a desktop now and it ain't working.
Sent from my PC36100 using XDA App
Thanks a lot, you helped me fix my problem
So simple. My sm j700p is rooted with QA2 completely stock rom. Original stock rom only root and TWEP RECOVERY.......
DOWNLOAD TERMINAL FROM PLAY STORE
Open and type this exactly. Of course you hit enter after each coomand....
su
am start com.sec.hiddenmenu/.Program_Edit
Then program service window will pop up.
Scroll to the bottom a Service Programming Code is your MSL CODE! WRITE THAT 6 DIGIT CODE DOWN AND GOTO DIALPAD AND TYPE ##DATA# AND CLICK EDIT AND ENTER THE SERVIVE PROGRAMMING CODE AND HIT OK!!!! Your in!
*********** THAT EASY! MAKE SURE TO HIT THE LIKE BUTTON! THANK YOU!
Exactly what to type in the terminal. Recommend Terminal Emulator.
And type exactly whats in the text to get your MSL CODE in just a minute or two.....
Bump bump bump
Wow no poll but has been visited so many times....
https://forum.xda-developers.com/sprint-galaxy-s6/general/to-msl-t3553758
You didn't even give me credit dude
@Poebat Never seen your thread before. Im only in my device j700 thread.
Bump
on sm-a520f there is no com.sec.hiddenmenu error 3
could you help me?
btw: i'm rooted and follow all steps as descriebed.pls help
https://ibb.co/gFHhek
XxTeXx07xX said:
@Poebat Never seen your thread before. Im only in my device j700 thread.
Click to expand...
Click to collapse
You posted this in my thread
pashamangl said:
on sm-a520f there is no com.sec.hiddenmenu error 3
could you help me?
btw: i'm rooted and follow all steps as descriebed.pls help
https://ibb.co/gFHhek
Click to expand...
Click to collapse
Im sorry I do not have that device so I cant help much. If you are rooted already i am positive that this will work. Atleast on 3 different samsung devices it has work for me each time. Make sure you are typing in exactly what it says.....
open the terminal emulator and type this in exactly! Dont typr in the word enter. Thats just a reminder to hit enter after each command.
su (enter)
am start com.sec.hiddenmenu/.Program_Edit (enter)
and you should get a pop up screen and scroll down to the bottom and the Service Programming Code will be at the bottom. Write down the 6 digit SPC code and thats your MSL when you goto your phone keypad and dial ##3282##. Hit edit and type in that 6 digit code and your in!!!! Not sure on all devices but even with my new device Samsung Galaxy J727P with 7.0 still works perfectly! am start com.sec.hiddenmenu/.Program_Edit
((({ NO SPACES WHEN TYPING IN THIS PART com.sec.hiddenmenu/.Program_Edit })))
I CLEARLY SEE WHY!!!!!!! you did not type /.Program_Edit
YOU FORGOT THE / In your picture I can clearly see you are not typing it in the correct way. You need to type it in EXACTLY THE SAME AS I TYPE IT IN THE THREAD> YOU ARE NOT TYPING IT IN CORRECTLY THATS WHY!!!!! THATS WHY ITS NOT WORKING AND YOU ARE GETTING A ERROR EVERYTIME. PAY VERY CLOSE ATTENTION WHEN TYPING IT IN. YOU NEED TO TYPE IT IN THE EXACT WAY I WROTE IT! Its nothing I did or that this dont work! I can see clearly in your photo you are not typing it in correctly and thats your problem. Clear as day you are not typing it in right. This is a error on your part. All you have to do is copy the commands in EXACTLY as I wrote it. (enters) are just reminders to hit the enter button....,... It wsorks great trust me! Its your fault, you are not typing it in correctly. I know it works and can see clearly that you are not typing it in correctly. I can see why in your screenshot!
Wow that last part turned quickly.
Nooooo Wayyyyy.....
XxTeXx07xX said:
So simple. My sm j700p is rooted with QA2 completely stock rom. Original stock rom only root and TWEP RECOVERY.......
DOWNLOAD TERMINAL FROM PLAY STORE
Open and type this exactly. Of course you hit enter after each coomand....
su
am start com.sec.hiddenmenu/.Program_Edit
Then program service window will pop up.
Scroll to the bottom a Service Programming Code is your MSL CODE! WRITE THAT 6 DIGIT CODE DOWN AND GOTO DIALPAD AND TYPE ##DATA# AND CLICK EDIT AND ENTER THE SERVIVE PROGRAMMING CODE AND HIT OK!!!! Your in!
*********** THAT EASY! MAKE SURE TO HIT THE LIKE BUTTON! THANK YOU!
Click to expand...
Click to collapse
I been looking and looking studying everything trying to figure this out. Low and behold I came across this posting. Thank you!
This works thank you
XxTeXx07xX said:
So simple. My sm j700p is rooted with QA2 completely stock rom. Original stock rom only root and TWEP RECOVERY.......
DOWNLOAD TERMINAL FROM PLAY STORE
Open and type this exactly. Of course you hit enter after each coomand....
su
am start com.sec.hiddenmenu/.Program_Edit
Then program service window will pop up.
Scroll to the bottom a Service Programming Code is your MSL CODE! WRITE THAT 6 DIGIT CODE DOWN AND GOTO DIALPAD AND TYPE ##DATA# AND CLICK EDIT AND ENTER THE SERVIVE PROGRAMMING CODE AND HIT OK!!!! Your in!
*********** THAT EASY! MAKE SURE TO HIT THE LIKE BUTTON! THANK YOU!
Click to expand...
Click to collapse
Unfortunately, it didn't work on my device (SM-J510GN). Even though my device is properly rooted, it shows an error. (picture attached)
https://imgur.com/a/dTd6y
cooldudell said:
Unfortunately, it didn't work on my device (SM-J510GN). Even though my device is properly rooted, it shows an error. (picture attached)
https://imgur.com/a/dTd6y
Click to expand...
Click to collapse
I know you posted this a month ago, but looking at your picture... you put a space when launching the activity.
mohhaxs said:
I know you posted this a month ago, but looking at your picture... you put a space when launching the activity.
Click to expand...
Click to collapse
There are no spaces. I re-checked it multiple times.
I'm able to still get mine. I just can't change my apn files that led me to finding how to get my Msl. I need to know how to access the apn file. Not the apn.xml files and oldapn.xml file. If you read them files in text editor it has a comment in green (NOTEPAD++) Tell you it has to match file in directory common/something I can't recall. Any insight?
Trying to get my hotspot free again like it use to be!
mohhaxs said:
i know you posted this a month ago, but looking at your picture... You put a space when launching the activity.
Click to expand...
Click to collapse
absolutely no spaces!!! Trust me!
mohhaxs said:
I know you posted this a month ago, but looking at your picture... you put a space when launching the activity.
Click to expand...
Click to collapse
ABSOLUTELY NO SPACES!!! TRUST ME! It still works today!
So this worked but didn't work. The program menu popped up and it said my code was 000000 and I tried that but still didn't have too many options available in the ##DATA# Menu