[Q] Help ! Cannot get any boot options - Blade General

I used the 'Flash ClockworkMod Recovery' option in Rom Manager on my phone & now i cannot get clockwork menu up when i do the power on/vol down thing.It just hangs on the green android screen & i have to take the battery out & back in again to boot normally. Also when i boot with vol up i get the same,there's no green writing which allows me to use an update zip method.It'll boot ok into the rom i last installed but thats it !
I am running GSF B27 - Gen 2
Android Version 2.3.4
Baseband P729B01
Can anyone help please ?

I'm also in a similar position to you. Are you sure you are holding down the menu key aswell as the +/- buttons?

all i get is a black screen when i do that

I think your phone may be bricked

I can use it no prob,but i'm stuck with GSF B27

I've done it......I used fastboot with this image
recovery-clockwork-4.0.1.5-blade-gen2.img
and yahooo ! it booted into cwm 4.0.1.5
everything works ok now

Related

can some one help me

ermm i dunno if this is a problem but my streak wont boot normally screen goes all buggy and crackly, recovery is not loading either even tho i hold both vol up and down all i get is the menu to select upgrade via pkg i can boot to fast boot and i have tried qdl nothing seems to sort my problem out if anyone can help me id really appreciate it
have you tried flashing streakmod recovery via fastboot?
Spriggen said:
ermm i dunno if this is a problem but my streak wont boot normally screen goes all buggy and crackly, recovery is not loading either even tho i hold both vol up and down all i get is the menu to select upgrade via pkg i can boot to fast boot and i have tried qdl nothing seems to sort my problem out if anyone can help me id really appreciate it
Click to expand...
Click to collapse
Not Android Development
Please Read and learn on How to post in the correct Forums Thank you
Moving to General
sorry bout that... i can use qdl to restart phone to a point where its stable but then i try reinstalling both clock and streak mod (not together) through fast boot and its says it installs then i can access the recovery menu with 4 options and thats it for both after that its very whimsical and doesn't let me in black screen for both or crashes and then i have to qdl the thing again so i can access phone cos it messes up phone install (i got the repair tool from the xda forums and also used both manual and also multi recovery flasher to flash both streakmod basesband and clockwork)
ERROR[D14]: Read OSBL version Failed!
osbl.mbn version:
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Download Fail! - 2011/04/05 19:17:55
Elapsed Time: 8.54 sec
and now i get this error in qdl is this somehow connected to the problem?
I assume you already know you have to select the second option(update via update.pkg) to get into clockwork/streakmod if you loaded streakmod you need to press the power button to get in.
1. QDL
2. Fastboot: flash 345 baseband (amss+dsp1 img), flash streakmod's img, reboot
3. dont let it boot up(very important), press vol up+down right after fastboot reboot
4. choose 2nd option (update via ....)
5. press power button when u see a dell logo with a triangle
6. flash streakdroid by update with zip in sd card
7. profit!
i knew how to reflash stuff as i have done that now... kinda allivaetd my own problem it was getting to streakmod and clock wrk in the first place that was the problem, i dunno how i fixed it either and it seems sorted for now
thxs for the replies tho

recovery help!

Hi,
I recently flashed the cm72-120124.0859-NIGHTLY-Defy.zip, and now that i am trying to flash to cm72-120126.2206-NIGHTLY-Defy, but now when i try to boot to recovery, i get teh warning screen with the android and the exclamation point.
My phony works fine, but now I can't get into the custom recovery.
please help!
thnak you,
How did you entered to recovery??
Vol- on blue led i think, the custom is still there! Otherwise the phone doesnt boot
Motorola Defy CM7 RC 1.5 OC 1GHz
i usually just rebooted to recovery from the cm7 menu.
it's worked this way since i had cm7.1 stable, and other nightlies.
thanks, any advice is greatly appreciated.
Try boot into BootMenu and then go to custom/latest recovery? Did that work for you when you tried?
If the custom bootmenu is working properly, a blue LED on the phone should briefly light up each time the phone reboots (while the Motorola logo is being displayed). As soon as the blue LED lights up, press the volume down button. The custom BootMenu should display.
If that doesn't work, you could also try this. In CyanogenMod settings, go to Interface and make sure the "Power prompt" option is checked. Then, when you press and hold the power button and select "Reboot," you should see the option to reboot into "Bootmenu."
Thank you everyone,
i was able to get to the recovery menu by using the volume - at the blue light. still not sure why the reboot to recovery didn't work. it works now though.

[Q] Please help- defy stuck at red moto logo-recovery not showing full menu

hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Do not worry!
cute_kayani said:
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Click to expand...
Click to collapse
Hello there!
As you mentioned that you are not able to see other Recovery options like "Install from zip" etc. This is because you must be booting your phone into the Stock Recovery. For those extra options to come up we need to boot the phone into the Custom Recovery.
To boot into Custom Recovery:
1. Press power on button;
2. Notice when the LED light blinks "BLUE" color; press both the volume keys this time;
3. Now it should show you Custom Recovery options this time;
4. Select "Install from Zip" and flash the ROM you were trying to flash (Also refer to the ROM info if that has some special installation steps).
If the above steps does not resolves the issue then you can always flash you phone with the Stock ROM found in the following article named as SBF:
http://forum.xda-developers.com/showthread.php?t=1216982
[Note: Above mentioned article has all the information that a defy user needs. Thanks "Zephyrot" for that wonderful article.]
Hope that helps!
Good Luck!!
there is no blue led, when press power button it stuck on red moto logo..
and when press both vol down and power it goes into recovery with limited options.
can it is possible i put rom into sd card and rename it with Update.zip and then in recovery use it with update zip..
or any other solution
Thanks
cute_kayani said:
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Click to expand...
Click to collapse
I guess you'd charge your phone first then wait for a while,
cute_kayani said:
there is no blue led, when press power button it stuck on red moto logo..
and when press both vol down and power it goes into recovery with limited options.
can it is possible i put rom into sd card and rename it with Update.zip and then in recovery use it with update zip..
or any other solution
Thanks
Click to expand...
Click to collapse
I'm disappointed to know that you are still facing the same issue. Also, renaming the file to update.zip will not let you flash it.
As suggested above first recharge your battery for a while and then flash with appropriate SBF of your region using RSD Lite. Refer to the above given link it has all the information. Also, note that if you flash with any particular android version SBF (which is not a fixed SBF) then you will not be able to downgrade (above article has all info).
Hope this helps!
Good Luck!
Okay, thanks for all.. this is the T Mobile Uk version and i got it with eclair rom, and than updated with orignal T mobile froyo.
Now i should start from froyo or eclair?
cute_kayani said:
Okay, thanks for all.. this is the T Mobile Uk version and i got it with eclair rom, and than updated with orignal T mobile froyo.
Now i should start from froyo or eclair?
Click to expand...
Click to collapse
You may use any ROM either Froyo or Eclair. Please also check the downgradilbility of the ROM. As in many of the cases if the ROM is not fixed then switching back to the earlier versions is impossible without having the Nandroid backup. I suggest you to use the version which is officially released in your region.
ROMs can be downloaded from the below mentioned link:
http://and-developers.com/sbf:defy
Complete information about various SBFs at:
http://forum.xda-developers.com/showthread.php?t=966537
Hope this helps!
Happy Flashing!
i flash it with JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
and i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
what is this?
but when i connect usb ,rsd detect it..but this time no white led also.
I again flash it with JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
successfully passed and message pop for reboots,but still black screen.
Rajneeshgadge17 said:
Hello there!
As you mentioned that you are not able to see other Recovery options like "Install from zip" etc. This is because you must be booting your phone into the Stock Recovery. For those extra options to come up we need to boot the phone into the Custom Recovery.
To boot into Custom Recovery:
1. Press power on button;
2. Notice when the LED light blinks "BLUE" color; press both the volume keys this time;
3. Now it should show you Custom Recovery options this time;
4. Select "Install from Zip" and flash the ROM you were trying to flash (Also refer to the ROM info if that has some special installation steps).
If the above steps does not resolves the issue then you can always flash you phone with the Stock ROM found in the following article named as SBF:
http://forum.xda-developers.com/showthread.php?t=1216982
[Note: Above mentioned article has all the information that a defy user needs. Thanks "Zephyrot" for that wonderful article.]
Hope that helps!
Good Luck!!
Click to expand...
Click to collapse
Tnx for post guy
Palestrino said:
Tnx for post guy
Click to expand...
Click to collapse
Thanks,
I tried but there was no blue led and flash it two time but now black screen is the hurdle.
please tell how to pass this.
While flashing there was message for successful status, and reboot but now when i press power button nothing happen. And neither goes into boot loader or recover.
Only RSD detects my phone for flashing, otherwise its complete dead....
ohhhoooooo MIUI Rom You ruined my DEFY (
cute_kayani said:
i flash it with JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
and i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
what is this?
but when i connect usb ,rsd detect it..but this time no white led also.
Click to expand...
Click to collapse
cute_kayani said:
I again flash it with JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
successfully passed and message pop for reboots,but still black screen.
Click to expand...
Click to collapse
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Thanks Rajneeshgadge17..
When i press these buttons nothing is happening. and i charge up battery with universal charger, don't know what is wrong.
only RSd detect my phone when i plugin USB.. otherwise it seems completely dead.
can somebody help........
cute_kayani said:
can somebody help........
Click to expand...
Click to collapse
Refer this post = http://forum.xda-developers.com/showpost.php?p=24205029&postcount=2
What if I have balck screen in recovery mode as well?
Do you have any idea how to solve the same problem if the recovery mode does not start neither? Only RSDLite sees that the phone is connected. I can refresh the ROM but I did not find the right .sbf file yet. Do you know maybe which one would bring back the phone from death?
Thank you in advance!!
Rajneeshgadge17 said:
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Click to expand...
Click to collapse
Ryaren said:
Do you have any idea how to solve the same problem if the recovery mode does not start neither? Only RSDLite sees that the phone is connected. I can refresh the ROM but I did not find the right .sbf file yet. Do you know maybe which one would bring back the phone from death?
Thank you in advance!!
Click to expand...
Click to collapse
Try to find the latest stock rom from your region... and match with ur defy type... flash with rsd that would bring ur defy back
Sent from my XT535 using xda premium
Doesn't work for me
Rajneeshgadge17 said:
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Click to expand...
Click to collapse
Unfortunately it doesn’t work for me, my defy doesn’t react for any key combination. RSD Lite still discovers it I can flash any sbf’s. But I’m still getting black screen. The problem is that I don’t know which sbf I should use… Please help. I know I can’t brick defy but if I don’t know how to get back I’m almost there… 
0lsztyN said:
Unfortunately it doesn’t work for me, my defy doesn’t react for any key combination. RSD Lite still discovers it I can flash any sbf’s. But I’m still getting black screen. The problem is that I don’t know which sbf I should use… Please help. I know I can’t brick defy but if I don’t know how to get back I’m almost there… 
Click to expand...
Click to collapse
It seems an issue with the Kernel. May be you are flashing the Green lense Defy (MB525) with GB kernel (i.e. MB526 sbf).
Also check the Bootloader version and which Android version you were using.
Here is a list of all the SBF's for both versions:
http://forum.xda-developers.com/showthread.php?t=966537
Hope this helps.
PS:- I don't use Defy for a year now as I own a Nexus 4.

[Q] DVC P10 (Venus Pad)

Hi, I'm new in this forum.
I'm looking for a firmware which is working on my Venus Pad. I've flashed it a few weeks ago and since the flashing its only displaying a message which says ''If you have Paid for a newer Version of Android you've...''.
Please could anyone help me. The Tablet is'nt starting anymore until the message. I couldent get into the clockwork recovery menu. I want to flash it but I dont know which program I need and which firmware I could use.
Greetz
Taitanium
Bad flash?
Try to reflash or try different modded stock?
I've flashed it with clockwork, but now I couldnt get into the cwm. I need a program to flash it and a working firmware. Please help me, the tablet was so expensive-.-
Try the ROM again or try a different ROM that will partition you Nand ram differently to avoid the bad blocks that are causing the error.
You will need to flash it with NVflash recovery to restore it to functionality.
The previous flash didn’t write properly to your boot partition so you cant boot android and select reboot to recovery (which will boot CWM recovery from the recovery partition). Because you cant boot Android there is no way easy was to boot the recovery partition (where CWM recovery is located). The way to fix this is to use NVflash recovery to flash a ROM with a PC.
To put the tablet into NVflash mode the table first needs to be switch off properly. Sometimes it looks off when its not. To get around the hold the power button for 10 second before you start the back/power button thing. Now hold the back button for at least 2 seconds, without releasing the back button press the power button for 2 seconds and then release it, now keep holding the back button for a further 2 second. You will now be in NVflash mode, if you where connected to the PC while you did the back/power button thing the Pc should have pinged to say the device has been

[SOLVED] [Q] Huawei U8180 First time Modder Problem

[SOLVED]
I rooted this, installed clockworkmod, then went and got an cm7 dated april something 2012 u8160 rom from psyke83 website.
installed it through clockworkmod install from sd card option with success (also clicked option to backup everything).
yet when phone reboots it hangs on the blue arrow in a circle spinning around, sometimes reboots n repeats but it never goes past that.
I have tried going into recovery mode holding down volume buttons and power
and I get 1 of 2 errors:
with sd card in:
firmware update
step 1/2
unpacking
update failed
with sd card out:
purple screen.
I am a first time android modder, can someone please, please tell me how to fix this. I can access the sd card with a reader if need be to put whatever files on it that I should.
Thank you.
Start the phone by pressing volume up + power OR volume down + power. You should be able to boot to recovery with one of those combinations (other one boots to fastboot most probably). After that do the wipe data/cache and try to reboot once again.
What was wrong in the beginning was that you did not wipe data/cache. That made the CM use old OS's data files which obviously won't work.
The unpacking thing was caused by pressing volume up + volume down + power. That causes the phone to go to upgrade mode if there is an update package found.
Nope. still goes to the blue arrow circling then freezes then reboots....
mrw187 said:
Nope. still goes to the blue arrow circling then freezes then reboots....
Click to expand...
Click to collapse
You are right about me not wiping the data/cache though...
But in your phone forum, are there tutorials on how to boot to recovery? Do you have any other hard keys on the phone?
there is one other button but that didn't work either.
I cannot find a forum for Huawei model u8180 (
mrw187 said:
there is one other button but that didn't work either.
I cannot find a forum for Huawei model u8180 (
Click to expand...
Click to collapse
Hmm, would this work?
yay!!
it was volume up + power + cancel button (? maybe home button? not sure on what this button is but its the biggest).
wiped all data n cache n then it booted properly.
So the problem is solved? If you can, mark first post title with [SOLVED].
Sent from my U8800 using Tapatalk 2
huaweiU8180 freeze on boot to recovery
I have tried all the solution but failed the problem is my HuaweiU8180 keeps on hanging wen I try booting to recovery mode now I can't format my phone and I can't install a custom ROM even when the phone is rooted and I hav ROM manager premium installed and I flashed CWM but still someone help me please

Categories

Resources