Hi my phone bricked still on sony ericsson logo than I repair using sony ericsson update service when my phone turn on I can't root my phone anyone help me...............please
Sent from my E15i using xda premium
Turn on USB debugging mode and unknown sources and then restart your phone.
I always do this with SuperOneClick and it works every time.
Remember to install SE pc companion before root
or u may learn it from youtube (jz search x8+root+superoneclick)
1..First try SEUS Repair or flash with stock firmware 2.1 update1 (2.1.1.A.0.6) with latest baseband.
2..Turn on USB debugging mode and unknown sources and then restart your phone.
3..Then try with SuperoneClick or with X8toolBox.......
superoneclick failed to initialize?please help...thanks
makkel said:
superoneclick failed to initialize?please help...thanks
Click to expand...
Click to collapse
I've had problems with Super One Click 5.0 before give 4.9 a try. That one has worked for me.
Sent from my LG-P999 using xda premium
makkel said:
superoneclick failed to initialize?please help...thanks
Click to expand...
Click to collapse
take easy dude... get some water....
try this... if u use flashtoot,, any version... extracted,, and check on driver folder,,
u will see X8_ADB_drivers.zip file... extract it,,, go to your device manager,, see there.. with mark " ? ".. rite click on it,, and update driver.. go to extracted X8_ADB_drivers.zip where u put.. after that.. your i15 will be detected and u can root it..!!
hope this help full.. been happen to me before..
I had a problem with running Droid Explorer service, causing conflict with adb. Make sure you kill Droid Explorer in Task Manager before attempting to root the phone with SuperClickOne
as far as i know
1. enable debugging mode
2. plug phone in chargeing mode
3. use SuperOneClick
and that should be preatty much it
Download SOC v.1.7.
Turn USB Debugging mode on, but don´t connect the phone yet.
Click "root".
Wait until it says "waiting for device"
Plug the phone.(Don´t select anything at the popup, there´s no need to do this!)
That should do the trick, as it worked perfect for me and my sister on Vista, but it should work on other Windows verions too.
It didnt work on XP both flashtool and superone click:/
Sent from my E15i using Tapatalk
Try rooting with X8 toolbox from here http://forum.xda-developers.com/showthread.php?t=1117100
Good luck
EDIT: Do you have installed net.framework 2.0+ ?its necessary for super one click
Toolbox also didnt work, just stuck at: waiting for device... ok i will do it on other computer i think
stock rom - not rooted , cuz i brick it and need to do everything again..
Related
firmware version:2.1-update1
baseband version:2.1.54
build number:2.1.A.0.435
someone can help me how to root~~?
have you tried this?
http://forum.xda-developers.com/showthread.php?t=906248
yes but also havent reply~~
do you have usb debugging enabled?
Geez...
Still? People have rooted since October...
Download SuperOneClick, run as administrator, check Unknown Sources and USB Debugging, plug in, click Root.
Just use the flashtool. Its the easiest way to root. Simply plug in your phone and press the button, works everytime on every FW.
Sent from my X10i using XDA Premium App
i had follow ur videoto root it but still had not reply
where can find the flashtool?thx
charlan00 said:
where can find the flashtool?thx
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=920746
I have the stock rom (2.1). Kies connected to my phone one time only ! Now It never connect. Can someone help me to fix it ?
Thanx
i face the same problem ,during 1 st attempt of update unknown error occur and after that the it is not connecting again ,takes forever any one please help
the word going around is to uninstall all the previously installed phone drivers, download latest version of kies and install it again..
hope it works..
It has never connected to my phone. I don't miss it.
I have the same problem..
19.nvv.11 said:
the word going around is to uninstall all the previously installed phone drivers, download latest version of kies and install it again..
hope it works..
Click to expand...
Click to collapse
does not work even after uninstall i fix all the registry using c cleaner and restart and the use the latest version of kies
Hi... I hope this can help you...
Try to do this
try that but no improvement ,i also put in aeroplane mode but same problem.....
So I found how to fix this problem on the I9000 forum and It works
Follow this link :
http://forum.xda-developers.com/showthread.php?t=758212
E-mail samsung about it, they'll send you a tutorial.
There are other programs for manage your samsung mobile.Kies dont work for much people included for me.
Just connect ur phone without sd card and then try, it worked for me.
Sent from my GT-I5801 using XDA App
please delete or lock this thread. it doesnt make sense anymore.
Flash a rooted rom and try going back to ur rom
Sent from my GT-I5800 using XDA App
clarkkov said:
You can't root Froyo with z4Root. Download SuperOneclickRoot 1.7 + and just click the big "Root" button after you connect your phone to your PC. Remember to turn on USB debugging in development menu in applications options.
I see you are using XXJPQ, this is an unknown ROM to us, root is not implemented for this ROM. It may need special tweaking. Have you tried the "rageagainstthecage" method?
Click to expand...
Click to collapse
i know i must root with SOC, but it freezes on "waiting for device".
yes, this JPQ i can't find anywhere, it came on kies, here in croatia.. i tried "rageagainstthecage", but stil freezes (not responding) on "waiting for device".. i'm crazy, do you know where i can ask for that tweaking or developing?
divzzen said:
Flash a rooted rom and try going back to ur rom
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
but i don't want to flash that, just root as it is, i'm not expert in that stuff, so i don't want to play with that. just simple root mine 2.2 would be nice.
alen1901 said:
but i don't want to flash that, just root as it is, i'm not expert in that stuff, so i don't want to play with that. just simple root mine 2.2 would be nice.
Click to expand...
Click to collapse
z4root doesn't work on froyo. the only best method is super one click. right lick on super one click and run as administrator, that shud help u.
alen1901 said:
i know i must root with SOC, but it freezes on "waiting for device".
yes, this JPQ i can't find anywhere, it came on kies, here in croatia.. i tried "rageagainstthecage", but stil freezes (not responding) on "waiting for device".. i'm crazy, do you know where i can ask for that tweaking or developing?
Click to expand...
Click to collapse
hi
try this one it works every time for me on all roms i have tried
drop box link : http://dl.dropbox.com/u/10031257/SuperOneClickv1.7-ShortFuse.zip
do one thing if u have any other external hdd or any other USB devices connected to ur pc remove them all i dont know why but some times the apps gets confused and does not work and also temp stop ur virus scan while doing the process
it will work good luck
Super One Click HAS to work.
Since you updated you might not have USB debugging enabled... so make sure you do.
Also, try removing your SD card. (know it sounds stupid... but do it anyway.)
brjshshrma said:
z4root doesn't work on froyo. the only best method is super one click. right lick on super one click and run as administrator, that shud help u.
Click to expand...
Click to collapse
i allready tried, and compatibility mode to windows xp. not working. :/
haree said:
hi
try this one it works every time for me on all roms i have tried
drop box link : http://dl.dropbox.com/u/10031257/SuperOneClickv1.7-ShortFuse.zip
do one thing if u have any other external hdd or any other USB devices connected to ur pc remove them all i dont know why but some times the apps gets confused and does not work and also temp stop ur virus scan while doing the process
it will work good luck
Click to expand...
Click to collapse
can you upload somehow else this program? can't download from your link..
than i will try your directions.
TeamRainless said:
Super One Click HAS to work.
Since you updated you might not have USB debugging enabled... so make sure you do.
Also, try removing your SD card. (know it sounds stupid... but do it anyway.)
Click to expand...
Click to collapse
ofcourse i did that, and it's not working.
clarkkov said:
No guys, you don't get it. It's an official ROM that we haven't seen yet (At least I haven't seen it). There is no XXJPQ on samfirmware. This is the Q version - the last JP version. If these methods are not working, we need to "crack" the XXJPQ.
Alen, can you dump your ROM on an SD card and then upload it so we can see this wonder?
Click to expand...
Click to collapse
yes, i can't find anywhere that JPQ, strange thing.
i would but i don't know how to dump it.. instructions?
With all these troubles, is it worth being on that rom?
Sent from my GT-I5800 using XDA App
http://forum.xda-developers.com/showpost.php?p=13185480&postcount=2 -> 5.
Have you enabled the "Debug mode"?
Also click on check drivers from superoneclick.
LarryMetal said:
Have you enabled the "Debug mode"?
Also click on check drivers from superoneclick.
Click to expand...
Click to collapse
yeees i enabled.. and when i check drivers it says "no issue found!!" i think a problem is that JPQ. i will try tomorrow to save it and upload it.
I was having trouble rooting till a few days ago. of course, i was technically inept and kind of stupid. and though i see your problem might be a bit different because of the official ROM, but it's worth a shot.
Which version of SOC are you using? the one in the rooting thread or the latest one? the 1.7 didn't work for me, neither did 1.8 but 1.9 did the trick. Try that.
did you do the boot method? you turn on the phone while the rooting process is running on your pc and it is waiting for a device?
stubborn_d0nkey said:
did you do the boot method? you turn on the phone while the rooting process is running on your pc and it is waiting for a device?
Click to expand...
Click to collapse
maaan, thank you so much!! it did it!! it stoped at waiting for device, and i was sceptik, but when i turned on my phone, it recognized and worked. officiali rooted!! guys thanks for help!!
(still, maybe it's not only that, because, i went on pc device managare and click to update that ADB drivers while phone was booting, maybe that did the trick too. just saying, so if anybody has the same problems, to try that too. )
again, thank you all, especially you stubborn donkey.. helped a lot.
alen1901 said:
maaan, thank you so much!! it did it!! it stoped at waiting for device, and i was sceptik, but when i turned on my phone, it recognized and worked. officiali rooted!! guys thanks for help!!
(still, maybe it's not only that, because, i went on pc device managare and click to update that ADB drivers while phone was booting, maybe that did the trick too. just saying, so if anybody has the same problems, to try that too. )
again, thank you all, especially you stubborn donkey.. helped a lot.
Click to expand...
Click to collapse
So, officialy XXJPQ is "rootable".
LarryMetal said:
So, officialy XXJPQ is "rootable".
Click to expand...
Click to collapse
yes, it's rootable. but has bug, like somebody said for jpm, back key in contacts doesnt work, turn screen on only with home key. and it has some lags, freezes sometimes, stock browser is slower and buggier than 2.1 (jk1).
Hi everyone, I recently tried to install a custom rom to my sony ericcson x10a running gingerbread 2.3.3. I sucessfully rooted my phone and installed busybox, but when I got to xrecovery, i couldnt install it. So I decided to flash my phone to 2.1. After a sucessful flash, I've been stuck at the Sony Ericsson boot screen. I tried using the Pc Companion but even if it does detect my phone, it gives me these instructions:
1. Drag the status bar downwards
2.Tab USB connected
3. Tap Mount
4. PC Companion will connect to the phone.
And without doing those instructions, it wont connect my phone and i cant do anything. Im like really new to all this and would really appreciated anyones input on my problem!
Thanks
pdm117 said:
Hi everyone, I recently tried to install a custom rom to my sony ericcson x10a running gingerbread 2.3.3. I sucessfully rooted my phone and installed busybox, but when I got to xrecovery, i couldnt install it. So I decided to flash my phone to 2.1. After a sucessful flash, I've been stuck at the Sony Ericsson boot screen. I tried using the Pc Companion but even if it does detect my phone, it gives me these instructions:
1. Drag the status bar downwards
2.Tab USB connected
3. Tap Mount
4. PC Companion will connect to the phone.
And without doing those instructions, it wont connect my phone and i cant do anything. Im like really new to all this and would really appreciated anyones input on my problem!
Thanks
Click to expand...
Click to collapse
There may be some options using latest flash tool. You can download it from one of the threads in the development section.
I am presuming you haven't used flash tool yet. That should also install xrecovery.
Cheers,
Lunar.
Sent from my X10i using XDA
Thanks for the reply, I couldn't find anything on the latest flashtool, i think something is wrong with my loader on the phone. But it wont let me flash a new one, i go into flash mode when it asks me and then it magically disconnects and aborts the flash. Is there any other option for me?
Thanks m8
EDIT: My bad for not reading the thread title properly.
Anyways, what were you trying to flash? Can you give us the log of the flashing process?
pdm117 said:
Thanks for the reply, I couldn't find anything on the latest flashtool, i think something is wrong with my loader on the phone. But it wont let me flash a new one, i go into flash mode when it asks me and then it magically disconnects and aborts the flash. Is there any other option for me?
Thanks m8
Click to expand...
Click to collapse
try the Androxyde & Bin4ry flash tool.. i had a similar problem. xrecovery wouldn't install thru the apk.. i used the flash tool to install the recovery..
the latest 1 also has a BL unlocking tool.. the flashtool version is v6.8.0 or something as far as i remember..
AdX9170 said:
try the Androxyde & Bin4ry flash tool.. i had a similar problem. xrecovery wouldn't install thru the apk.. i used the flash tool to install the recovery..
the latest 1 also has a BL unlocking tool.. the flashtool version is v6.8.0 or something as far as i remember..
Click to expand...
Click to collapse
Thanks for the reply, I'm currently trying to update using SEUS v.2.11.4.11, I'll try using Androxyde and Bin4ry. SEUS is giving me instructions to go into flash mode and i cant now. The phone will just boot to the Sony Ericsson screen and then stop like before.\
I got SEUS working, phone is back to stock state. Thanks for help guys.
pdm117 said:
I got SEUS working, phone is back to stock state. Thanks for help guys.
Click to expand...
Click to collapse
How did you do it? I have the same issue my X10 freezes at the boot screen, therefore I can't start the flash mode.
http://www.youtube.com/watch?v=HmX-IYNYqL8
another flash option
Another option is to use the flasher at...
wotanserver
(google it)
sorry I cant include addresses coz I havent hit 8 posts yet
You have to sign up but its free and its easy and it worked for me
ZTE Blade III Pro Root & CWM
Requirements:- Brain
- Correct drivers! if you have problem via fastboot drivers on x64 Windows install PdaNet
- USB Debugging ON
Steps:- Download this:CWM
- Extract it and run recovery.bat!
- Follow the steps and when you are done you will be in cwm recovery!
- To root phone, if you're phone is not rooted when you click reboot in cwm it will ask you to root phone and root it by cwm!
- Download SuperSU from Market and you're done.
Q:How do i enter CWM recovery?
A:Turn off your phone and turn on by clicking Power + Volume UP
Andrej732 said:
ZTE Blade III Pro Root & CWM
Requirements:- Brain
- Correct drivers! if you have problem via fastboot drivers on x64 Windows install PdaNet
- USB Debugging ON
Steps:- Download this:CWM
- Extract it and run recovery.bat!
- Follow the steps and when you are done you will be in cwm recovery!
- To root phone, if you're phone is not rooted when you click reboot in cwm it will ask you to root phone and root it by cwm!
- Download SuperSU from Market and you're done.
Q:How do i enter CWM recovery?
A:Turn off your phone and turn on by clicking Power + Volume UP
Click to expand...
Click to collapse
Thanks Man Share it with The world
Thanks again and now just wheat for the Source Code .....
How can I get correct drivers? These one's from zte aren't working ;( ;(
EDIT (i have win 8.1 /32bit)
Installing PDA NET soloved the problem.
Hot to unroot ?
Marq94 said:
Hot to unroot ?
Click to expand...
Click to collapse
i have the same question? How to unrot ? i have 24 month guarante.
Anyone succesfuly unrooted this phone? Have new update for it, and cant update it, becouse its rooted?
gg4000 said:
Anyone succesfuly unrooted this phone? Have new update for it, and cant update it, becouse its rooted?
Click to expand...
Click to collapse
You can update if you are rooted .... yes you can
Sent from my ZTE Blade III Pro using Tapatalk
ilievski.ace said:
You can update if you are rooted .... yes you can
Sent from my ZTE Blade III Pro using Tapatalk
Click to expand...
Click to collapse
So how to do it? It just restarts the phone and starts in cwm, than reports error...
I have problem with this, does it mean I don't have brain ? Anyway I downloaded cwm and run recovery.bat when I did this my zte restarted and freeze with androind icon (this one during turning on) First thing I thought it was I have bad drivers so i get this PdaNet but still my phone restart during this recovery.bat and as this program says I still have bad drivers;/ What should i do?
ilievski.ace said:
Thanks Man Share it with The world
Thanks again and now just wheat for the Source Code .....
Click to expand...
Click to collapse
Dali e ova sigurno za root, i nema da mi go zezne telefonot?
Don't work for me
I tried all posible drivers to root this and I can't. I go through first part, my phone restarts, shows Android Logo,and stops there. I need to pull out battery to work with him.Also, it disappears from windows task bar as a remote device. What's wrong?
EDIT: I used another PC with Windows 7 Home Premium and it worked!!!
@Andrej732 Fala brat, raboti na ZTE Blade 3 Pro, T-mobile, Macedonia.
As xda rules apply, an english translation must always be included:
Thanks bro, works on ZTE Blade 3 Pro bought from T-mobile in Macedonia.
Heya,
I tried to root the phone using the method above, and when i started recovery.bat, it all went well, but after it finished, my phone restarted and froze on first screen... I did removed the battery and turned the phone on, not in cwm mode, and it went well, i can use my phone and all that... When i tried to boot it in cwm again, it froze again... Anyone can help me?
If you get stuck in the android logo after it reboots by itself, you have to change the recovery image in the cwm folder.
download the recovery image from here https://www.mediafire.com/?z1rmgt9cc6hdjzb
remove the old recovery.img from the cwm folder and put this file instead. then rename it to recovery.img instaed of the long name it had before the .img. that sloved it for me. thanks to the person that posted here: http://www.modaco.com/topic/360389-recovery-clockworkmod-6049-for-zte-blade-iii/
Good Day!
plz reupload
I got exact same problem. gotta old a mini. super phone, sat nav, MP3 player, ran quake perfectly, decided for dinner reason to factory reset, now just endlessly bootloops. sure I had a custom recovery, but no idea if debugging enabled. would love to get this phone back