Related
I am on the 3 Network(UK), my phone is branded, no lagfix, no root, im on froyo 2.2 oficial upgrade through kies.
Can someone please give me a simple step by step guide on how to upgrade to the JPY 2.2.1 firmware please, i have the 3 button recovery option btw.
Thank you in advance.
Simple: flash with odin (read the stickies...)
Simpler: apply Kies registry hack http://forum.xda-developers.com/showthread.php?t=835628&highlight=kies+registry+hack Product Code XEU
GMH24 said:
Simple: flash with odin (read the stickies...)
Simpler: apply Kies registry hack http://forum.xda-developers.com/showthread.php?t=835628&highlight=kies+registry+hack Product Code XEU
Click to expand...
Click to collapse
I'd go for a custom rom jpy based like docs or darkys and install through clockwork or you can go to samfirmware to download jpy and use odin to flash it up to you or just do as above and use patcher but jpy is definetly worth it.
The first time i tried the kies patch utility i got a messags saying there were more than 1 phone folders which threw me a bit, but managed to sort it in the end.
So now on ....
2.2.1
I9000xxjpy
2.6.32.9
[email protected] #1
froyo.xxjpy
Whoooohhooooooooo
Would you please share how you did it
jaytwo said:
The first time i tried the kies patch utility i got a messags saying there were more than 1 phone folders which threw me a bit, but managed to sort it in the end.
So now on ....
2.2.1
I9000xxjpy
2.6.32.9
[email protected] #1
froyo.xxjpy
Whoooohhooooooooo
Click to expand...
Click to collapse
Hi Jaytwo,
I have the same rom version as you on 3UK. I'm also trying to upgrade to 2.2.1. Could you please share you you did the upgrade. what values do i need to select from the registry patcher.
Thanks in advance for you help.
Kayno9 said:
Hi Jaytwo,
I have the same rom version as you on 3UK. I'm also trying to upgrade to 2.2.1. Could you please share you you did the upgrade. what values do i need to select from the registry patcher.
Thanks in advance for you help.
Click to expand...
Click to collapse
Hi Kayno
Set the "Enable Spoof" to True
Set "Spoof product code as" to XEU from the list
Then click on the Write Regstry button in the bottom right
Thats all you have to do, then voila when you start kies and connect your phone you should have a popup saying a firmware upgrade is available.
Good luck
jaytwo said:
Hi Kayno
Set the "Enable Spoof" to True
Set "Spoof product code as" to XEU from the list
Then click on the Write Regstry button in the bottom right
Thats all you have to do, then voila when you start kies and connect your phone you should have a popup saying a firmware upgrade is available.
Good luck
Click to expand...
Click to collapse
Thanks for the prompt repy Jaytwo.
I'll have a go and keep you updated.
jaytwo said:
Hi Kayno
Set the "Enable Spoof" to True
Set "Spoof product code as" to XEU from the list
Then click on the Write Regstry button in the bottom right
Thats all you have to do, then voila when you start kies and connect your phone you should have a popup saying a firmware upgrade is available.
Good luck
Click to expand...
Click to collapse
Also did you save the Rom through Kies. Was a bit confused when i read this part on the Kies Registry patcher thread.
By the way hows your experience with the new firmware been so far. Is 3G and WIFI working correctly. Have you tried the app market. Hows the overall speed of the phone and is gps working better now.
Sorry for all these questions but i just wanted to determine whether the risk of updating is worth it.
cheers
Thanks
Kayno9 said:
Also did you save the Rom through Kies. Was a bit confused when i read this part on the Kies Registry patcher thread.
By the way hows your experience with the new firmware been so far. Is 3G and WIFI working correctly. Have you tried the app market. Hows the overall speed of the phone and is gps working better now.
Sorry for all these questions but i just wanted to determine whether the risk of updating is worth it.
cheers
Thanks
Click to expand...
Click to collapse
No, i didnt save the Rom, 3g and Wifi are working fine but you will lose the My3 app because you will be basicly debranding your fone(if you are on contract), but if you start the default browser it takes you direct to My3 .
Havnt tried GPS , dont use it tbh.
The speed of the phone is so much smoother imo, im so glad i upgraded.
Hope that helps
jaytwo said:
No, i didnt save the Rom, 3g and Wifi are working fine but you will lose the My3 app because you will be basicly debranding your fone(if you are on contract), but if you start the default browser it takes you direct to My3 .
Havnt tried GPS , dont use it tbh.
The speed of the phone is so much smoother imo, im so glad i upgraded.
Hope that helps
Click to expand...
Click to collapse
Thats great news. Can you still use the three services though? Because i'm paying a lot of money for contract don't want to be losing my data allowance
Thanks for help again. I'm about to flash it. Fingers crossed.
Kayno9 said:
Thats great news. Can you still use the three services though? Because i'm paying a lot of money for contract don't want to be losing my data allowance
Thanks for help again. I'm about to flash it. Fingers crossed.
Click to expand...
Click to collapse
Jaytwo,
My installation failed. Did you manage to flash it on the first go. I did exactly as you said. The thing is it finishes downloading in about 15 mins then fails installation. I also had the multiple folder detected problem. I clicked on ok on the registry patcher to delete the folder and re-started keys with the sgs connected.
The phone disconnects and after about couple of minutes is says Failed to convert to upgrade mode. Please try later.
Does anyone else know how to fix this? Am i doing anything wrong
thanking you in advance
Yes it flashed first time for me.
When the phone disconnected did you do anything?
I noticed when i flashed that the phone disconnected but i didnt touch anything and left it to carry on, it took a while but all went well in the end.
Try flashing again, just to check do you have the 3 button recovery option on your phone?
jaytwo said:
Yes it flashed first time for me.
When the phone disconnected did you do anything?
I noticed when i flashed that the phone disconnected but i didnt touch anything and left it to carry on, it took a while but all went well in the end.
Try flashing again, just to check do you have the 3 button recovery option on your phone?
Click to expand...
Click to collapse
Hi Jaytwo,
I have not touched the phone when it disconnected as i remember from a previous upgrade to Froyo from Eclaire when it disconnected and then reconnected before completing the upgrade.
I have the 3 button recovery i checked it. The wierd thing is the phone did not reboot to downloading mode where the yellow android digging man picture appears. The phone stays as it is. I wonder whether samsung changed anything recently.
kingconnought, on the main registry patcher thread also mentioned he is experiencing the same problem.
Can anyone else help.
Thanks again
I dont understand why your phone will not go into download mode as that is part of the flashing process.
Try doing a factory reset through settings on your phone, then try flashing again, apart from that im not sure what else you can do apart from flashing thru odin?
jaytwo said:
I dont understand why your phone will not go into download mode as that is part of the flashing process.
Try doing a factory reset through settings on your phone, then try flashing again, apart from that im not sure what else you can do apart from flashing thru odin?
Click to expand...
Click to collapse
Thanks Jaytwo,
I will try factory restting. See if is works although i will have to go throught the pain of reinstalling all apps again.
By the way did you lose all your apps and data after the upgrade?
Kayno9 said:
By the way did you lose all your apps and data after the upgrade?
Click to expand...
Click to collapse
No, thats the reason i wanted to upgrade thru kies as it keeps all your settings and apps, the only app i lost was the My3 one.
Hope its second time lucky for ya
jaytwo said:
No, thats the reason i wanted to upgrade thru kies as it keeps all your settings and apps, the only app i lost was the My3 one.
Hope its second time lucky for ya
Click to expand...
Click to collapse
LOL... This will be my 5th time.
By the way i thought il tell you this. If you ever want to for God knows whatever reason re-brand your phone to 3 then select the H3G product code and it should Flash your phone to the latest 3 branded Froyo which is JP5.
If i have to resort to Odin then i might as well wait for 3 to update their version to 2.2.1 as im too scared to Flash via Odin as there is too many risks associated with it. Or who knows Samsung may decide to release another version which might work.
Thanks
I got a quick question about this subject. Ik have no experience without android firmware flashing. Do ik need to backup stuff like imei number? For when the **** hits the fan. And if so how do ik do that?
*edit
found the answer to my own question here: http://forum.xda-developers.com/showthread.php?t=723596
Sent from my GT-I9000 using XDA App
jaytwo said:
No, thats the reason i wanted to upgrade thru kies as it keeps all your settings and apps, the only app i lost was the My3 one.
Hope its second time lucky for ya
Click to expand...
Click to collapse
not a good idea anyway.. there are a multitude of issues after upgrading os and not doing a factory reset...
Kayno9 said:
LOL... This will be my 5th time.
By the way i thought il tell you this. If you ever want to for God knows whatever reason re-brand your phone to 3 then select the H3G product code and it should Flash your phone to the latest 3 branded Froyo which is JP5.
If i have to resort to Odin then i might as well wait for 3 to update their version to 2.2.1 as im too scared to Flash via Odin as there is too many risks associated with it. Or who knows Samsung may decide to release another version which might work.
Thanks
Click to expand...
Click to collapse
Jaytwo,
It was 5th time lucky thanks to your recommendation to factory reset the phone. i factory set the phone again after upgrade and it is taking off like a rocket. Still yet to check everything but i have lost access to My3 as you said. I will let you know if i can manage to get access again.
Thanks for all your help mate. I apreciate it
This is a newest firmware ZQKJ6 for i9100G... Based on the forum... this firmware capped CPU speed at 1.2Ghz instead of 1008Mhz... Kindly flash with Odin...
***I am not responsible for any damage to your phone.. Flash with own risk!***
Note : This is ONLY for [I9100G]
ZQKJ6 Firmware Donwload Link:
http://www.megaupload.com/?d=4N5EUCR7
ONLY for [I9100G] For who want flash the ZQKJ6 kernel file :
http://www.megaupload.com/?d=O4X6SIYJ
Instruction : Put the attach zImage into sdcard, then flash with HC-Ktool.
* I have noticed that the CPU clock speed something will jumped to 1200mhz more often instead of previous 1008mhz...
Pls share your notification for this Kernel...
I have post the Screen shot of the CF-Bench with this Kernel...
What do you guys think for this score?
****Sorry for the Bad English****
serge327 said:
This is a newest firmware ZQKJ6 for i9100G... Based on the forum... this firmware capped CPU speed at 1.2Ghz instead of 1008Mhz... Kinly flash with Odin.
ZQKJ6 Firmware Donwload Link:
http://www.megaupload.com/?d=4N5EUCR7
Click to expand...
Click to collapse
Is it a chinese based rom?!
Screenshot? Any more info?
xmoo said:
Screenshot? Any more info?
Click to expand...
Click to collapse
i haven try yet... but i have flash the kernel from this rom by using zimage...
version 2.3.6 ???
adivorandroid said:
version 2.3.6 ???
Click to expand...
Click to collapse
yeah u try?
This is very interesting... Beside the kernel capped at 1.2 I'm wondering what else is new? What's with the 2.36 version?
Sent from my GT-I9100 using Tapatalk
Gs2 bricked
Tried to flash this new firmware and bricked the phone:-(
Cant power on the phone .....dead! :-( Any ideas?
Try charging it for a while, then forcing it into download mode and connecting odin and flashing your original firmware back on. Or use a jig to force it into DL mode if that doesn't work, they're only a few quid on ebay.
Any new radio or kernel?
AnalogX said:
Tried to flash this new firmware and bricked the phone:-(
Cant power on the phone .....dead! :-( Any ideas?
Click to expand...
Click to collapse
This is for the i9100G as it says in the title. If you flashed it on your i9100 I'm pretty sure you are screwed.
Ye that's exactly what happened :-( I didn't read carefully!!! I order the USB dongle ASAP. USB dongle will still get me back into download mode wont it?
AnalogX said:
Ye that's exactly what happened :-( I didn't read carefully!!! I order the USB dongle ASAP. USB dongle will still get me back into download mode wont it?
Click to expand...
Click to collapse
Not sure, but it's worth a try.
Yes, I knew this would happen when I saw the thread open up today. The OP should edit the title for noobs so they won't flash this and brick their phone.
This is NOT a ROM for the International or non-G version, and it WILL brick your device. You'll need the service center (or jtag) to get it back if you flash this.
It wont you have briccked your phone, You will need to flash a new Kernal 1st, and even the Jig wont be able to read, as the drivers wont load. this needs deleteing before anyone else does the same thing, Guys!
No, dumb ass morons just need to read the thread title better...
interfreak said:
No, dumb ass morons just need to read the thread title better...
Click to expand...
Click to collapse
Yeah everyone needs to f****** learn to read better!!!111oneoneone /s i9100g should get its own sub forum to avoid future confusion and heartache that stems from bricking one's phone.
well after reading countless threads I have not yet gotten an answer or been pointed in the right direction. I rooted my phone recently, I tried to install CWM, then flashed another kernel as i was instructed to, now, Im stuck on the boot screen and cant get anywhere, i can although get into the downloading part of the phone, Ive been trying to locate the original stock kernel with no success. Please help before I go nuts!!
MWaV said:
well after reading countless threads I have not yet gotten an answer or been pointed in the right direction. I rooted my phone recently, I tried to install CWM, then flashed another kernel as i was instructed to, now, Im stuck on the boot screen and cant get anywhere, i can although get into the downloading part of the phone, Ive been trying to locate the original stock kernel with no success. Please help before I go nuts!!
Click to expand...
Click to collapse
Right, you're another one who don't know the difference between a Galaxy S2 and an Epic 4G. I already answered your other post do stop spamming the board.
---------- Post added at 01:01 AM ---------- Previous post was at 12:59 AM ----------
AnalogX said:
Ye that's exactly what happened :-( I didn't read carefully!!! I order the USB dongle ASAP. USB dongle will still get me back into download mode wont it?
Click to expand...
Click to collapse
U DUN GOOFED. Jig won't help, you need JTAG servicing or take it to a Samsung service center.
I was trying to root the device so i can get it updated from 2.2
I used Odin and tried recovery.tar file and now I'm getting a screen with a phone icon with a caution icon in the middle and a computer icon after it.
So I think I really messed it up
Any help
the thing is Odin is still connected
and no matter how much i try restarting whether in download mode or regularly same thing is still happening.
So if I can get some help would really appreciate it. I hope it can be restored
G
positiveg said:
I was trying to root the device so i can get it updated from 2.2
I used Odin and tried recovery.tar file and now I'm getting a screen with a phone icon with a caution icon in the middle and a computer icon after it.
So I think I really messed it up
Any help
the thing is Odin is still connected
and no matter how much i try restarting whether in download mode or regularly same thing is still happening.
So if I can get some help would really appreciate it. I hope it can be restored
G
Click to expand...
Click to collapse
Look and see if you have recovery mode available >>> volume up+power
nopes even when I boot power + vol up/ vol dn, still get that screen
G
just flash back to stock.. odin still recognize your phone.. thats what i do.. but if odin not recognize your phone, sorry i dont know..
positiveg said:
nopes even when I boot power + vol up/ vol dn, still get that screen
G
Click to expand...
Click to collapse
Does Odin still see the device? If it does, try to install the stock firmware. It may take some time to find it on the net. The first place I would try is here http://www.sammobile.com/firmware/?page=3 and scroll down the page, put in your info in the drop down boxes and submit.
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that was similar
positiveg said:
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that was similar
Click to expand...
Click to collapse
What is your model number?
acefsw said:
What is your model number?
Click to expand...
Click to collapse
I think he's talking about SGH-I497 ZSAAT
positiveg said:
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that
Try this http://forum.xda-developers.com/showthread.php?t=857608
Click to expand...
Click to collapse
This is the screen I am getting on the tablet
Sent from my HTC Inspire 4G using xda app-developers app
That forum doesn't really work.
Gonna see what I can do still
thanks
acefsw said:
positiveg said:
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that
Try this http://forum.xda-developers.com/showthread.php?t=857608
Click to expand...
Click to collapse
Click to expand...
Click to collapse
positiveg said:
This is the screen I am getting on the tablet
Sent from my HTC Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
It is a soft brick and is recoverable. Go to here http://forum.xda-developers.com/forumdisplay.php?f=752 and read all the stickies in the general and dev sections. Apparently, you will not find an at&t rom per se, but can flash a new rom and pit, there are some very good detailed instructions available, but first read, and read some more, and some more after that. Apparently, your type of tab had signed bootloader issues, so be careful which rom you load. Also, as I have suggested with my links, go to the correct forum. I'm pretty sure you have a sgh i987, (based on the fact you were running 2.2 on at&t), and not a tab2.
---------- Post added at 11:55 PM ---------- Previous post was at 11:51 PM ----------
acefsw said:
It is a soft brick and is recoverable. Go to here http://forum.xda-developers.com/forumdisplay.php?f=752 and read all the stickies in the general and dev sections. Apparently, you will not find an at&t rom per se, but can flash a new rom and pit, there are some very good detailed instructions available, but first read, and read some more, and some more after that. Apparently, your type of tab had signed bootloader issues, so be careful which rom you load. Also, as I have suggested with my links, go to the correct forum. I'm pretty sure you have a sgh i987, (based on the fact you were running 2.2 on at&t), and not a tab2.
Click to expand...
Click to collapse
Previous link was to the wiki, this one is to the forum. Many links will be dead and you will have to likely download the euro rom from sammobile. There is also a sticky for radio issues.
Thanks appreciate all the help AMD o just realise I said this forum instead of this link that you had pointed to earlier. So again thank you. I will read through it while on break and again at lunch and try and make sure I do it right. Most the rims I see at sammobile are 4.04 or above those should he ok right?
Again thanks and will let you know. Cause I got this yesterday for my wife. So.....
Sent from my HTC Inspire 4G using xda app-developers app
wan903 said:
just flash back to stock.. odin still recognize your phone.. thats what i do.. but if odin not recognize your phone, sorry i dont know..
Click to expand...
Click to collapse
Can you assist in where i can find the original ROM?
thanks
I've let the battery run down, well I think that's what happen anyway cause it's not coming on. I have it plugged into the wall but it still not coming on. But will give it a while and see.
The tablet came back on with the same screen from earlier. but now I'm looking at it it's gone off,
it feels warm but maybe it's me.
I don't know
I'm beginning to wonder about ordering a new one lol
G
positiveg said:
Thanks appreciate all the help AMD o just realise I said this forum instead of this link that you had pointed to earlier. So again thank you. I will read through it while on break and again at lunch and try and make sure I do it right. Most the rims I see at sammobile are 4.04 or above those should he ok right?
Again thanks and will let you know. Cause I got this yesterday for my wife. So.....
Sent from my HTC Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
What is the serial number? The rom has to match the model, you cannot just use any samsung rom.
acefsw said:
What is the serial number? The rom has to match the model, you cannot just use any samsung rom.
Click to expand...
Click to collapse
serial number R2YB51005k
model is SGH-i987
thanks it stopped coming on I realise I would plug it in it will come on then go back off not sure after how long it goes back off I know I had ti plugged in both via wall and computer.
via computer the computer did pic it up cause it showed drivers being loaded
Now no matter what I'm doing I get a black screen
G
Ok got it on charging same screen as I told you about before that I attached earlier
I've looked for the ROM suggest Euro but no luck, the links were dead
And while typing those last few words it gone back off, so i'm guessing it can only be on for say 30 mins.
If I can get the ROM and install it via Odin then I can possibly get it restarted
Thanks
G
positiveg said:
serial number R2YB51005k
model is SGH-i987
thanks it stopped coming on I realise I would plug it in it will come on then go back off not sure after how long it goes back off I know I had ti plugged in both via wall and computer.
via computer the computer did pic it up cause it showed drivers being loaded
Now no matter what I'm doing I get a black screen
G
Click to expand...
Click to collapse
Ok, as I suspectef, you have the galaxy tab, not the tab 2, hence this is the wrong forum. Go to the forum I linked to, there are some stickies about rooting, recovery soft brick, etc. My understanding is that overcome rom or p1000 should work, but you must follow whatever odin procedures, etc. they use. Chainfire has a great post up about recovering, however the file links no longer work. Go there and ask if someone has the file(s) you need. This guy lists the files he used from sammobile http://forum.xda-developers.com/showthread.php?t=996970 You will not find the files in this forum, this is the wrong forum for your device, this is for tab 2 models 31xx and 51xx, yours is a p1000 branded.
Hi Guys,
I havent used this site in years but recently I bought a Galaxy S4 outright from JBHIFI.
Before you guys give me alot of crap, I have a very bad feeling that I may have hard bricked it.
It doesnt turn on anymore, not even in recovery or download mode. I am very new to android as I was using an iPhone before and couldn't resist attempting to root my phone (stock program were killing my battery)
I hadn't even had the chance to flash a custom rom on there as far as i know i just grated root access.
Funny thing is it was doing the same thing the other day. But randomly it decided to charge and turn on. Now it is definitely not charging or turning on and i have no idea what to do... it just sucks cause i havent ever this phone for a month and its already useless! :crying:
I was using it for about a week after i rooted and now im just stuck with a brick.
Any help would greatly be appreciated, feel free to ask any questions.
Send back t store and thel t workers that just whont turn on.Dhont thel that is rooted or somthing
Sent from my GT-I9505 using xda premium
yeah thats what im planning to do its about exactly a month since i had it today... i just didnt want to mention anything cause i know you guys and moderaters dont condone that kind of behaviour! thanks though, im pretty much screwed arent i? ill be heading into jbhifi on my lunch break will go ahead with that plan haha.
ill tell you guys how it goes.
Have you tried a battery pull?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
sorry... is that just taking the battery out? LOL if so, yes ive tried it quite a few times.
at one stage it was turning on but only loading the splash screen... so i pulled the battery out. even if i tried to start it in recovery mode, it would only load the blue text at the top of the screen and then freeze.
i have a mate who also got an s4 so i was going to meet up with them and see if i could use their battery because it seems the phone has even lost its capability to charge.
Dead boot http://forum.legija.net/showthread....g-galaxy-S4-(i9505-and-similar)-via-USB-Cable
Sent from my GT-S5360 using xda app-developers app
that seems very useful, but to use it i would have to be in download mode atleast right? problem is i cant even turn on phone to get into download mode
didnt go jbhifi today had to fix my rims instead LOL, trying other solutions and finding a spare battery to see if its just that... maybe then it will beable to atleast boot in download mode
raintouchpad said:
that seems very useful, but to use it i would have to be in download mode atleast right? problem is i cant even turn on phone to get into download mode
didnt go jbhifi today had to fix my rims instead LOL, trying other solutions and finding a spare battery to see if its just that... maybe then it will beable to atleast boot in download mode
Click to expand...
Click to collapse
No, you don't have to be in download mode. Install right driver, connect your phone to pc and run the program. Then it will be in download mode, so flash firmware with pit file
Sent from my Galaxy Nexus using xda premium
well so far... i tried this at work and no luck, so i went home and tried it there... still no luck.
you mentioned i need to install the right driver? is that the QHSUSB drivers? (where can i find them and are they specific for the S4) anyway when i plug my phone into the computer there is no indication that it is being detected at all.
just hoping to try out more suggested solutions before i attempt to take it back into the store and have em tell me that my warranty is cooked
Hi just an update.
Took my phone to samsung because it was just completely screwed. They replaced the motherboard and camera but didnt find out that my phone was rooted which was good.
Thanks for your help everyone
*edit*
After they said they replaced my camera i am now getting the "camera app failed" message, wheres theres a black screen and the app doesnt work... ive had it with this phone now... going to walk into samsung and lose my ****.
raintouchpad said:
After they said they replaced my camera i am now getting the "camera app failed" message, wheres theres a black screen and the app doesnt work... ive had it with this phone now... going to walk into samsung and lose my ****.
Click to expand...
Click to collapse
Don't bash the phone for nothing ...
Somehow I doubt that they didn't test the camera after replacing it.
Next time, take it easy, and what ever you do, read carefully the instructions.
same issue
My galaxy S4 is "hard bricked" as well after trying to flash OMEGA ROM onto the device. My guess is that somebody mislabeled the ROM and it was intended for the octal-core processors and not the US quad-core ones.
Does anyone have a link for the qualcomm drivers that are needed? I'm at a loss currently in regards of which direction to take.
Thanks in advance,
Fickl3
fickl3 said:
My galaxy S4 is "hard bricked" as well after trying to flash OMEGA ROM onto the device. My guess is that somebody mislabeled the ROM and it was intended for the octal-core processors and not the US quad-core ones.
Does anyone have a link for the qualcomm drivers that are needed? I'm at a loss currently in regards of which direction to take.
Thanks in advance,
Fickl3
Click to expand...
Click to collapse
see my sig for dead boot and Qualcomm driver
samersh72 said:
see my sig for dead boot and Qualcomm driver
Click to expand...
Click to collapse
Does this process work for hard bricked phones as well?
fickl3 said:
Does this process work for hard bricked phones as well?
Click to expand...
Click to collapse
it should :good:
---Repair dead boot I9505 via usb cable--- Thanks to legija from JTAG team.
QHUSB Qualcomm driver download
Click to expand...
Click to collapse
I also hard bricked my S4 but with the utility Im able to get in Download mode, flash .pit and stock Samsung firmware but after flashing is succesfully done it goes into qhusb again and It again is dead.
how to install the driver?
samersh72 said:
it should :good:
Click to expand...
Click to collapse
How exactly do we install the driver? The download is a zipped file and I don't know how to install the extracted contents.
rsndetre said:
Don't bash the phone for nothing ...
Somehow I doubt that they didn't test the camera after replacing it.
Next time, take it easy, and what ever you do, read carefully the instructions.
Click to expand...
Click to collapse
i know... its just frustrating... i pretty much got it when it came out and convinced all my mates that it was the best phone out there at the moment (all the features are pretty nifty and its powerful ill admit)
funny thing was the camera was working perfectly before i took it in and didnt even think it needed replacing. the camera worked when i got it back the first time i opened the app but it had smearing (pink vertical lines on bright objects). after that it the app didnt open again and just has the "camera app failed" error.
as for the hardbrick guys i think the qualcomm drivers work but only if you can get your phone to turn on or enter d/l mode. mine was so fried out that it wouldnt show any signs of life even after getting the drivers.
samersh72 said:
it should :good:
Click to expand...
Click to collapse
well thats od not for me
Aerys said:
I also hard bricked my S4 but with the utility Im able to get in Download mode, flash .pit and stock Samsung firmware but after flashing is succesfully done it goes into qhusb again and It again is dead.
Click to expand...
Click to collapse
givin me a little hint?
LastStandingDroid said:
well thats od not for me
givin me a little hint?
Click to expand...
Click to collapse
He probably means this: http://forum.legija.net/showthread....g-galaxy-S4-(i9505-and-similar)-via-USB-Cable
This was also samersh72's suggestion when i bricked mine. Problem is, there was no way for me to acces that qhusb mode thing as the phone was totally dead and doesn't even charge.
Jtag could probably revive it though.
Anyway, sent mine for repairs with
custom binary status and the samsung guys accepted it as there was no way for them to revive the phone(the motherboard was replaced). They didn't found out that it was modified.
Sent from my GT-I9505 using Tapatalk 4
i attempted to root this G950U S8 and didn't like how the rom turned out. How can I get back to stock? I have looked all over and have been unable to find a stock rom to download. Which is different than any other phone I've had so i find it unlikely that it can't be done. If you have a link to a stock reset rom, please post it.
thanks
goblue30093 said:
i attempted to root this G950U S8 and didn't like how the rom turned out. How can I get back to stock? I have looked all over and have been unable to find a stock rom to download. Which is different than any other phone I've had so i find it unlikely that it can't be done. If you have a link to a stock reset rom, please post it.
thanks
Click to expand...
Click to collapse
Sammobile or updato.com
TheMadScientist said:
Sammobile or updato.com
Click to expand...
Click to collapse
A had flashed the partcybor root rom and I undestand that it also changed the boatloader to G950UEU2AQK2. Should I do something vith the boatloader in ordert to back to the stock room?
I am moving back to stock because I have problems charging battery!
Thanks
escueto33 said:
A had flashed the partcybor root rom and I undestand that it also changed the boatloader to G950UEU2AQK2. Should I do something vith the boatloader in ordert to back to the stock room?
I am moving back to stock because I have problems charging battery!
Thanks
Click to expand...
Click to collapse
as long as its a version 2 boot-loader your fines several firmware's on u2 bootloader...
Also is it the 80 % charge limit your speaking of ? If so thats a samsung thing its in the kernel and nothing we can do about it but the rom is tweaked just right...You get more life on a 80% charge than 100% charge the batt life on this rom is phenomenal
TheMadScientist said:
as long as its a version 2 boot-loader your fines several firmware's on u2 bootloader...
Also is it the 80 % charge limit your speaking of ? If so thats a samsung thing its in the kernel and nothing we can do about it but the rom is tweaked just right...You get more life on a 80% charge than 100% charge the batt life on this rom is phenomenal
Click to expand...
Click to collapse
My battery problem is another one, when I conect the charger nothing happens and my phone runs out battery, buy it seems in dowload mode it charges. When I stay conected in Download mode for some minutes, then go out and the percent battery is 100%. I am not sure if it is a hardware problem. I m triying back to stock rom but it seems to be some kind tricky, right now I am reading a lot.
Thank you very much for your help!
escueto33 said:
My battery problem is another one, when I conect the charger nothing happens and my phone runs out battery, buy it seems in dowload mode it charges. When I stay conected in Download mode for some minutes, then go out and the percent battery is 100%. I am not sure if it is a hardware problem. I m triying back to stock rom but it seems to be some kind tricky, right now I am reading a lot.
Thank you very much for your help!
Click to expand...
Click to collapse
i cant get back to stock keep getting the unathorized softwar screen