[Q] htc mini android apn issue - HD Mini General

Hi i have a problem with 3g connection using giffgaff sim it conects sometimes then nothing i have tried to change the settings in the apns but get force close error every time i try to add or modify apns i have all the settings for giffgaff but cannot edit or add apns without force close tried apn restore still forces close unistalled formated sd card reinstalled applied updates as per threads about 20 times now still get no further with changing apns so is there any other way to change the apns and configure one for giffgaff or do i just give up thanks for any advice

i think its better to put your question in HD Mini Android Development section

I tried it wont let me post anywhere else

dazzacool said:
I tried it wont let me post anywhere else
Click to expand...
Click to collapse
Probably a (newbie) post restriction on the Android section, from the days that the forum was being flooded by new people asking the same questions...

I had the same problem. I used 'Apn manager' to configure all settings...

ah..............

just try to increse your posts more than 10 after that you can post in develpoer page like android

Don't know if it work, but did you try the 3Gfix?

Related

Preferred network list

Hi there, im having one problem and cant figure it out... i tried searching but i found just few threads asking same question but nobody answered...
so question is how to save list of preferred network list... by default i have first t-mobile even tho my card is o2 and i cant use data connection with tmobile cause it goes in roaming but if i pick manually o2 everything works fine... i can edit preferred network list but after every soft reset it returns to default settings... so im back to tmobile and i have to go to settings and manually switch it... is it somewhere saved in file/registry so i can hard code it the way i want?

MMS settings for T-Mobile TP2 without data plan?

Just purchased a TP2 and completed the HardSPL and installed the EnergyROM. However I still can't get the picture messaging to work correctly. My previous phone was a unlocked Sony W810i which I'm able to send and receive MMS messages with no problem. I've tried to duplicate some of the settings from phone to phone but I haven't had good results. I didn't want to spend the extra money for the data plan because the phone has WIFI built in. All I want to do is be able to send and receive MMS messages. Can anyone help? Thanks.......Jason
go back to where you downloaded your rom and look for the mms settings cab and keyboard cab. nrg's energyroms always has a cab for it...
or you can do it yourself its easy
go to connections
select tmo mms
hit edit and change the access point to wap.voicestream.com
leave everything els the same way and save haha its easy
after having to flase a new rom every day(im addicted) you memorize it
Under the T-Mobile MMS I have
Server name: T-Mobile MMS
IP address: 216.155.165.50
Port number:8080
Server address:216.155.174.84/servlets/mms[/url]
Connect via: T-Mobile MMS
Message size limit: 300KB
WAP Version: WAP 2.0
Where do I enter the access point name?
This ROM does have T-mobile setup program but the settings for MMS will not work. I don't why I can't get it to work, I can send MMS on my W810i with no problems.
http://thewingster.com/Documents/MMS Fix (M2.1) (T-Mobile).cab
CLICK HERE AND INSTALL THIS CAB...NEXT TIME SEARCH BEFORE YOU ASK.
akademik_acheeba said:
http://thewingster.com/Documents/MMS Fix (M2.1) (T-Mobile).cab
CLICK HERE AND INSTALL THIS CAB...NEXT TIME SEARCH BEFORE YOU ASK.
Click to expand...
Click to collapse
Thanks, but the CAB still didn't work. I can receive, but I still can't send. Also, I have been searching on multiple forums, so don't just assume that I haven't been looking. I have been searching and trying different settings for 2weeks.
djelwood said:
Thanks, but the CAB still didn't work. I can receive, but I still can't send. Also, I have been searching on multiple forums, so don't just assume that I haven't been looking. I have been searching and trying different settings for 2weeks.
Click to expand...
Click to collapse
ok when you download a rom and have a problem with it, browse that roms forum and look for the bug post. i see you have nrg's energy rom so i went there and found the mms fix...click here....100!!!
akademik_acheeba said:
ok when you download a rom and have a problem with it, browse that roms forum and look for the bug post. i see you have nrg's energy rom so i went there and found the mms fix...click here....100!!!
Click to expand...
Click to collapse
looks like it was sourced to the same .cab file. hmmm did you go into connections and setup mms after the install?
akademik_acheeba said:
looks like it was sourced to the same .cab file. hmmm did you go into connections and setup mms after the install?
Click to expand...
Click to collapse
Yes, I tried setting up the MMS settings after the install. I was having this same problem before I flashed the the NRG ROM. I see that you have T-Mobile, did you have to install the CAB? Do you think I'm having issues becaus I don't have a data plan? I wouldn't think that would be the case because my old unbranded W810i works just fine when sending and receiving MMS. However that phone is not a smart phone. When you are in the connections tab what is the difference between My Work Net Work, and the standard T-mobile Data. Under my work netwok I have no connections set up. However I was reading a thread on a different forum that instructed you to setup a MMS connection under MY WORK NETWORK. I tried that, but it din't work. Also, everytime I try to send an MMS I get a message that says my current data connection will be stopped in order to send the MMS and then you have to select OK, is that normal? Sorry for the paragraph...this is driving me crazy.
did you go to start/settings/connections/connection setup and select your country and operator? that should have done the trick. if that dont do it then this is what you do. since the tmo mms .cab dosent fix it and your connections are set and it still wont work, go to tmobile.com and grab the 6.5 rom upgrade, flash it, soft reset,(this will set all your settings to tmobile network), try to mms and if successful, flash back the NRG rom and use the .cab for mms linked on his rom thread(also get the keyboard fix). it will take you about half an hour. if you dont want to do that then wait and see if someone else has a solution. theres 183 views on this thread and no one stepped in to give advise. i have unlimited everything with tmo and i have no issues with mms. hope you can mms soon...
djelwood said:
Just purchased a TP2 and completed the HardSPL and installed the EnergyROM. However I still can't get the picture messaging to work correctly. My previous phone was a unlocked Sony W810i which I'm able to send and receive MMS messages with no problem. I've tried to duplicate some of the settings from phone to phone but I haven't had good results. I didn't want to spend the extra money for the data plan because the phone has WIFI built in. All I want to do is be able to send and receive MMS messages. Can anyone help? Thanks.......Jason
Click to expand...
Click to collapse
I don't mean to slam you...too badly, but if you don't know how to fix this simple problem, you probably shouldn't be flashing roms. The fix was in the 3rd post, but obviously you haven't used Windows Mobile long enough to know what he was talking about, and you haven't searched for the answer long enough.
So with that said I will walk you through it.
1. Go to the Start Menu, Settings, Connections, and run Connection Setup. Ensure that you have selected United States for country and the operator is T-mobile. Click Ok. Then Yes.
2. Soft Reset
3. Go to the Start Menu, Settings, Connections, and open Connections.
4. Click on the "Advanced" Tab, select Networks, on the pull-down menu select T-Mobile MMS, and click edit.
5. The Radio tab next to T-mobile MMS should be selected, if not click it, then click edit and the bottom of the screen.
6. Click Next on the Name Connection Screen.
7. The next screen should be Access Point Name.
8. Change this to wap.voicestream.com
9. Click Next, on the next screen click finish, and the following click ok.
10. Change the box for "Programs that automatically connect to......." to T-mobile Data and click ok.
11. Soft Reset
I verified these steps as flashed the new version of NRG rom.
diablc said:
I don't mean to slam you...too badly, but if you don't know how to fix this simple problem, you probably shouldn't be flashing roms. The fix was in the 3rd post, but obviously you haven't used Windows Mobile long enough to know what he was talking about, and you haven't searched for the answer long enough.
So with that said I will walk you through it.
1. Go to the Start Menu, Settings, Connections, and run Connection Setup. Ensure that you have selected United States for country and the operator is T-mobile. Click Ok. Then Yes.
2. Soft Reset
3. Go to the Start Menu, Settings, Connections, and open Connections.
4. Click on the "Advanced" Tab, select Networks, on the pull-down menu select T-Mobile MMS, and click edit.
5. The Radio tab next to T-mobile MMS should be selected, if not click it, then click edit and the bottom of the screen.
6. Click Next on the Name Connection Screen.
7. The next screen should be Access Point Name.
8. Change this to wap.voicestream.com
9. Click Next, on the next screen click finish, and the following click ok.
10. Change the box for "Programs that automatically connect to......." to T-mobile Data and click ok.
11. Soft Reset
I verified these steps as flashed the new version of NRG rom.
Click to expand...
Click to collapse
I appreciate your help, and I did try doing this before with 6.1, with 6.5, and with the NRG ROM. Maybe I missed a step or installing the MMS T-mobile cab screwed it up. However I did get it to work this time. Maybe I'm not a WM guru like you, but I'll be enjoying my NRG ROM now. Would you like to make a donation for your help? I know everyone gets tired of answering the same question over and over, however I have honestly been searching different forums and trying different fixes cabs etc.. Once again thanks for everyone's time. Too bad you have to get flamed for asking.
djelwood said:
I appreciate your help, and I did try doing this before with 6.1, with 6.5, and with the NRG ROM. Maybe I missed a step or installing the MMS T-mobile cab screwed it up. However I did get it to work this time. Maybe I'm not a WM guru like you, but I'll be enjoying my NRG ROM now. Would you like to make a donation for your help? I know everyone gets tired of answering the same question over and over, however I have honestly been searching different forums and trying different fixes cabs etc.. Once again thanks for everyone's time. Too bad you have to get flamed for asking.
Click to expand...
Click to collapse
good to hear u all set.u dont have to be a wm guru to know your question. u only have to be a search guru, your question was very elementary.
sorry, wrong thread, please delete

No data/SMS/mms Unlocked HD2 with Froyo 2.2 on AT&T

Hey guys! Been a long time follower of this site, not really one to post as I ca. Usually found answers. But my issues with my HD2 has me stumped. I'm very familiar with forums as I myself is a member of a few sites. I know the golden rule about searching before creating a new thread, but google and YouTube has failed to provide an answer.
My issue is that I cant for the life of me figure out how to enable data on my unlocked HD2 when Froyo 2.2 is loaded. When it is on WinMo everything works Internet, MMS, etc..
But when I launch android via Haret I see that it has AT&T service but no data ( just phonecalls).I've deleted and entered the APN several times with no avail. I've read numerous guides and watched endless videos and still can't get it to work.
If someone could please help me out I'd appreciate it.
Currently running energy rom, custom radio 2.15.XX, format FAT32 sd card, performed Task 29 several times. And using hyperdroid 1.7.
Thank you
What APN settings are you using?
mastajest said:
What APN settings are you using?
Click to expand...
Click to collapse
it's not letting me post certain parts of the APN because they are links, you have pm sir. I apologize.
I am also using an unlocked HD2 with AT&T and data works automatically with no manual configuration. Go to settings, wireless, mobile networks, network operators and click AT&T. Make sure Data Enabled is checked. Try putting your phone in airplane mode in windows mobile.
Also, we are limited to EDGE data with any HD2 on AT&T, no 3G.
thanks guys for your comments. I actually went ahead and loaded another android rom that automatically sets everything vs manually. Everything seems to be working fine now.
Again thank you guys.
**Mods feel free to delete/merge thread**
I have kind of same problem i can get data and incomeing sms but no out going sms
thanks for help in advance

[Q] Android MMS Settings

I am trying to find two things:
I run the HD2 on ATT. I dont need the settings, cause I already have working settings. What I am trying to find out is:
1) Where in the files, is the setting to change the MMS limit, and before you point me to the setting on the phone, thats not what I am talking about. on ATT the limit is 600k, but on the phone the Max I can choose is 300K so I want to know where is this info located and if its easy to change?
2) Can anyone tell me what in the kernel controls the data / MMS settings? The reason I have tried different kernels and the only two kernels that work are DFT on their released rom, and Projections, if I try to use M-DeeJays kernels, my MMS fails to send or recieve, so can someone tell me what module or what file I need to replace?
Thank you.
Anyone?
I found a thread about changing MMS values, but it only works for SDCard Android, not NAND, so again, anyone have any input? Members? Dev's? Fixer's? Anyone?
Again ANYONE have a CLUE?
AngelDeath said:
if I try to use M-DeeJays kernels, my MMS fails to send or recieve,
Thank you.
Click to expand...
Click to collapse
i cant help with the 600k part, but i can say that i use cyan nand rom, and the mms settings are screwed for my provider, first i have to go in and select the correct active data account, then remove two duplicate but erronous default/mms accounts, that think theyre for my network, but dont work, and prevent the almost-but-not-quite-correct real data / mms ones from working, , then i have to alter the username to get them working, and the new settings dont work till you reboot, and you forget and test it and think its not working, and tear your hair out screaming till the missus tells you to grow up and get rid of that damned phone for the love of christ!
my point being its probably not an actual fault as such with that release, just the APN settings that are created that interfere with each other..
Actually no, the APN settings are exactly, I mean EXACTLY, I have 1 apn setting before updating the kernel, and after its the same apn setting, I triple checked and all the values are the exact same.
Mind you I am on ATT's network using the phone in 2g, which shouldnt make a difference since the apns dont care what network your on.

[Q] MMS not working....tried every solution I found

Hi,
I have a problem with sending/recieving MMS.
I know that this question was raised here million times, but for the last hour I was searching here, googling around the net...and no solution I found worked for me.
APN settings for MMS are correct, I tripple checked that. Tried many variation, change few settings, but no luck.
I read somewhere that when wifi is on, MMS wont work. But wifi is usually off in my case.
Tried to delete APN settings, and reset them to default....also tried to manualy enter APN settings for data and for MMS.
Also tried to chage custom user agent...now it is on default android.
Size of MMS wasnt the case because I was trying to send small audio files (about 20kB).
Here you can see logcat while I was trying to send MMS.
This lines from it I guess that are important:
E/Mms:transaction( 1042): Url: http://mms.telenor.rs/servlets/mms
E/Mms:transaction( 1042): HTTP error: Forbidden
E/SendTransaction( 1042): java.io.IOException: HTTP error: Forbidden
Somehow it is not allowing me to use MMS server.
After that I turned on setting 'use only 2G networks' in settings / mobile network and next MMS was sent without problem. Then I disabled that option, waited a little for connecting with provider to finish and tried again. MMS was sent succesfully again.
Then I rebooted the phone, and after that I cant send MMS with or without that option turned on. No luck after another reboot. In logcat now are the same errors.
Anyone have a clue how to fix this?
Bump???
Anyone has any idea?
Ask your network operator.
Also:
Before you start, you need to activate your handset for receiving and sending MMS. For handset configuration send a SMS with text ‘mms’ to 131. Once you have sent the SMS for MMS configuration, you will receive MMS settings in the form of an SMS which you need to save.
You can also download MMS settings on your handset click here.
(url: http://www.telenor.com.pk/services/handset.php )
dkl_uk said:
Ask your network operator.
Click to expand...
Click to collapse
That came to me, but wanted to try something else before that for few reasons.
First: MMS worked fine when I first started to use android (mostly sense builds). I haven't tried it until recently, and as I said in two occasions MMS was sent successfully, so if my network operator is blocking it, I guess that I couldn't done that in those two times.
Second: I bought HD2 on contract at my network operator 6 months ago, and already violated warranty at least 50 times, so it would be awkward to ask them why is MMS not working on my Android HD2
Anyway, thanx for the suggestion, if I don't get any other hint here, I might try that...
edit: I just read you second message. MMS is activated long time ago and I have used it many times. I know the correct configuration for MMS. I have tried the one that was auto installed at first boot, and they are the same as the one I have.
clyder said:
I bought HD2 on contract at my network operator 6 months ago, and already violated warranty at least 50 times, so it would be awkward to ask them why is MMS not working on my Android HD2
Click to expand...
Click to collapse
To be fair they don't need to know what OS you have on your phone. They probably don't even know the HD2 can run Android, or possibly even what Android is.
Navigate your phone to the link I supplied above. The problem of course is that the page may well be dedicated to some sort of WM application rather than Android.
I googled this and returned only some issues of application development for the iPhone and Android where people were suggesting to use different port numbers etc, hence my advice to ring your network operator.
I'll guess I'll try that. Thanx for your help.
BTW, your link was telenor site from Pakistan And I couldn't open it. Anyway I read several APN settings on Telenor Serbia site, for HD2, Desire, Desire HD, generic Android settings...parameters are correct. Also tried to change port to 9021 (it said that it is for older devices), with no luck....
dkl_uk said:
hence my advice to ring your network operator.
Click to expand...
Click to collapse
Well, apparently your advice was the right one. I called call center, my MMS service was active. They deactivated and reactivated it, I deleted APN settings, did a restart, entered settings again and so far it works, even after few restarts....
clyder said:
BTW, your link was telenor site from Pakistan And I couldn't open it.
Click to expand...
Click to collapse
Did you make the same mistake as me and try to open it on your desktop PC?
It states you must open the link in your mobile device
dkl_uk said:
Did you make the same mistake as me and try to open it on your desktop PC?
It states you must open the link in your mobile device
Click to expand...
Click to collapse
I couldn't open in on PC nor in mobile Opera browser.
clyder said:
Well, apparently your advice was the right one. I called call center, my MMS service was active. They deactivated and reactivated it, I deleted APN settings, did a restart, entered settings again and so far it works, even after few restarts....
Click to expand...
Click to collapse
Ah - just saw this.
Glad they've sorted it.

Categories

Resources