Even when volume is set to 1 the sound is very loud?
Have a look at the Cab customisations in the WP7 ROM section. There are cabs you can install that will resolve the volume issues.
Also use the Advanced config tool from Julien Schapman, it allows you to set the volume of notification sounds independently.
CAB install not available on ROM
also config tool wont install on Mango ROM? Thx for advice.
Related
how to install a software not in the default location with the Tytn?
i've tried every reg hack found for wizard and universal but doesn't work..
i've tried also to deflag on activesync the button "install on default place" but this option seems blocked...
and last but not least also with cabinstl 1.04 the default installation path overrides the custom one...
anyone as an idea?
please tell me...
thx in advance
bubu
nobody as this problem?
New ROM P535 (V0.8)
+ Registry optimzed
+ File icons sorted
+ Program folder sorted for sections
+ new icons
+ integrated .Net Framework SP2
+ Add Cyberon Voice Speed Dial
+ Soft Key
+ 2 alarm sound and 5 ringtone
+ Crossbow and MMT theme
+ Add SMclose
+ Network operator codes in registry
- Removed ring tone setting from settings (useless)
http://norad.shacknet.nu/lifeforce/
i wish i had bought p535... but eten m600+ (
What's been changed in the registry?
I don't dare upgrading my rom (yet - because I dont have a backup of it) but I am not afraid of tweaking the registry
And also because my current rom has cyberon voice commander. I guess changing to speed dial would mean loss of functionality?
(and, is it possible to back up my current rom to an SD card? If that's possible then I'm not afraid of trying your rom )
Changing MiniSD file name
I'm using the Rom for Taiwan right now, since I use this phone in US therefore the stupid TomTom GPS Navigator 6 can not regonized my MiniSD card folder in Chinese due to I set the region to US. Is this Rom be able to allow me to change the MiniSD file name?
Thanks for any respond
hyl768s said:
I'm using the Rom for Taiwan right now, since I use this phone in US therefore the stupid TomTom GPS Navigator 6 can not regonized my MiniSD card folder in Chinese due to I set the region to US. Is this Rom be able to allow me to change the MiniSD file name?
Thanks for any respond
Click to expand...
Click to collapse
Think this can be done via a simple registry setting. You must rename a specific registry value, but can't reacall where's located. Try searching SD_CARD in this forum, and you'll find the answer somewehere Asukal's post.
lukacs.attila said:
New ROM P535 (V0.8)
+ Registry optimzed
+ File icons sorted
+ Program folder sorted for sections
+ new icons
+ integrated .Net Framework SP2
+ Add Cyberon Voice Speed Dial
+ Soft Key
+ 2 alarm sound and 5 ringtone
+ Crossbow and MMT theme
+ Add SMclose
+ Network operator codes in registry
- Removed ring tone setting from settings (useless)
http://norad.shacknet.nu/lifeforce/
Click to expand...
Click to collapse
Dude, I'm gonna need some help here, how the **** are you doing this: Push Off button + rec. button + nav. up + reset 5sec???????????
Go on flame me! I just can't make it work
I would love to try this, but:
I have a german device, so there is no official ROM yet.
Is there any way to replicate the actual Software to the SD?
And:
How did you do these changes?
Which Tools do you use?
Where can i find Informations about the Settings you changed?
Hi, i was installing the srs wow for xperia (http://forum.xda-developers.com/showthread.php?t=355913) , but installing the file in the wavedev.zip, a reg file, now i have no more sound.. Now i need urgently help, couse i have to rewrite an entire registry key...
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev
could anyone tell me al the values in this zone of registry??
i need heeeeeeeeeelp
@Trakkiggio
Your post seems incomplete to me:
Have you first installed an SRS WOW CAB file before wavedev.reg ?
If so, which version of SRS please ?
Version 1.2.10 works OK in WM6.1 IF:
a) install CAB version 1.2.10 and soft reset
b) insert wavedev.reg into Registry and soft reset
Version 1.5.10 does NOT work in WM6.1. The dll file in 1.5.10 kills the sound. I've tested this on 3 different WM6.1 devices to try and sharpen phone communication voice talk - only 1.2.10 works.
Some posts say that 1.2.10 prevents you from setting sound levels. I've not found that to be accurate if the a), b) installation sequence above is followed
ianl8888 said:
@Trakkiggio
Your post seems incomplete to me:
Have you first installed an SRS WOW CAB file before wavedev.reg ?
If so, which version of SRS please ?
Version 1.2.10 works OK in WM6.1 IF:
a) install CAB version 1.2.10 and soft reset
b) insert wavedev.reg into Registry and soft reset
Version 1.5.10 does NOT work in WM6.1. The dll file in 1.5.10 kills the sound. I've tested this on 3 different WM6.1 devices to try and sharpen phone communication voice talk - only 1.2.10 works.
Some posts say that 1.2.10 prevents you from setting sound levels. I've not found that to be accurate if the a), b) installation sequence above is followed
Click to expand...
Click to collapse
i have tried all the possilbe cabs... whitout reg file ... and maybe the 1.5 and then the reg file.. what can i do to restore the sound? you think that if i install cab 1.2.1 and then reg file should it work my sound? or the 1.5 + reg file damage the loudspeaker?
1-what is ROM ?
2-if it put tf3d rom or another it will delete all files in the system ( like hard reset ) ?
3-is tf3d is like a panel ( spb mobile shell ) or will delete windows mobile system?
4-what is GeoTagging in camera ?
thanks
From what ive gathered by using roms my self... i have found the following:
1. What is a rom?
it is basically the thing that make the user interface look the way it looks. The default windows today panel is the default rom which the phone comes with. TF3D rom will replace that and make it look like a HTC Touch HD. you can install it as a panel by following this link-
http://forum.xda-developers.com/showthread.php?t=441439&highlight=tf3d+panel
Download TouchFlo3D on Xperia X1 cab and TouchFlo3D as Panel Installer Installer.
Install TF3d first, softreset, then go to settings, today, items and untick every thing. then soft reset.
Now install TF3d panel installer. soft reset. then just choose the panelas younormally would.
2. A rom will edit certain windows files to make it look and behave in a different way, but it would still be the windows interface. if you install another rom, it will erase all files on phone. and replace certain windows files.
3. see q 1
4. Dont know what geo tagging is??
thanks alot
but when i install the tochflo 3d beta 3 and made everything then when i press on the panel it writes to me loading in a white screen and notheing occure ??
Hi all, Not been around for a long time, but I've picked up a HD2 to play around with WP7.
Settled on Yuki/XBmods BTTF ROM - fully updated (8107). Although I have an issue with the physical keys on the device - they only light up when they're being pressed - they don't remain on for a few seconds afterwards.
I've installed Leo Advanced (As I've read that can change those settings), but when I try to load up key map, the HD2 will vibrate once then close Leo Advanced (It has full root permissions through use of WP7 Root Tools).
Is there a registry setting where I can change this, or a fix I've overlooked to get Leo Advanced working? I've tried a search but I'm not finding anything specific to this ROM. If I use pdaimates or Ansars rom the backlit keys are fine.
No backlight on BTTF (Cotulla Driver not installed)
I'm guessing there's no way around this?