Database Users

[Q]How to make SD card ready for WP7?

Hi,
I have Sandisk 2gb SD card which comes with hd2, i installed WP7 but it seems that WP7 can not recognize my SD because when i put SD in my computer nothing is changed in my SD even i tested it, I put some files in SD and reinstall WP7 so as far as i understand wp7 has to format my SD put its specific partition but guess what nothing is changed in my SD even that files remain in the same place...
So i tried to format SD my self with FAT32 and FAT and even i delete my SD partition and none of them make WP7 format and make partitions on my SD card...
P.S-1 My SD card is working i tested it wit my computer by formatting copy some files there so read and write is ok.
P.S-2 WP7 booted correctly in this situation i mean when SD is in device the only problem i have is WIFI can not find any router when SD is in device, when i took it out wifi start working, why i'm saying this because i aware of compatibility issue of WP7 with some SD cards where it reboots if it is not compatible .

same thing happens to me, I am now trying to reinstall (again) wp7, and it seems it got stuck at the DFT screen..... previously it booted almost inmediately. maybe it is partitioning it?, for those of you guys that sd card works, wp7 boots inmidiately?

Yeah SD cards makes crash wifi !
And i cannot use it... Flash WP7 with formated SD cards NTFS but still doesn't works !

First time i istalled WP7 without SD card and when i afterward inserted card nothing was changed. Then i made Factory Reset from Settings menu and my phone started to restart over and over from point where DFT banner shws first time after loader. Then i went to the loader and as i can remember then i re-selected preferred boot source and then for me all was good. Now it show 1.6GB free space with my original HD2 SD card.

i am having axactly the same trouble. i have a san disk 2 gb too. it'll be enough for me but wp7 does not recognize it. i installed both sd-card inserted and sd-card not inserted. i booted with sd-cad and without sd-card. i tried every posibility but no result
reserved space is %95 on zune and it tells me there is no disk space. so i cant start using it full functionally and it makes me really sad
any help is appreciated. thanks.

Pisisuli said:
...
and my phone started to restart over and over from point where DFT banner shws first time after loader.
...
Click to expand...
Click to collapse
that's exactly what mine did!
...
Then i went to the loader and as i can remember then i re-selected preferred boot source and then for me all was good.
...
Click to expand...
Click to collapse
how did you do that? can you provide a short 1,2,3 step- tut to me? thx in adv.!

Same here my 2Gb card is only showing 15 mb of available space and I cant even transfer music or install any apps. can some pls help me
thanks

I just went to
setting and then soft reset ... and I couldn't go to loader I don;t know why !!
then I lost every thing even the unlock ...
and in the finally i found just 997 mb !!!!!!!!!!!!!!!!

jessesam said:
Same here my 2Gb card is only showing 15 mb of available space and I cant even transfer music or install any apps. can some pls help me
thanks
Click to expand...
Click to collapse
I have exact the same problem.. i found some sort of "solution". but it is a bit strange. when I pull out the sd card, boot my phone in magldr, insert my sd card and boot wp7, It shows the normal storage instead of the 15 mb.
but when I try a normal reboot without going to magldr, its going back to the 15 mb. and when I try to sync my phone with zune,(with the put-sdcard-in-phone-when-in-magldr-solution) everything goes slow.
Dont know if you (or someone else) already found a "good" solution?
greetz

all of you guys have an incompatible SD card, sorry guys, will need to buy a new one, its a bit of a lottery as that too might not work and dispite what some on here say its impossible to recomend anything.
only advice i can give is get a card that class 2 or 4 and dont spend money on a card that you may end up using for a tiny paperwight

is my sd card gone?
After I successfully flash WM7, I juz realize that my pc not recognize my sd card when i connect my phone to d computer. First, i thought becoz of some bug of wm7 so i try to flash android back. I took my sd card put into a card reader but it still not recognize my sd card. Is it gone?

What about the sd unlock tool that xbmod released ? try a few nokia devices or a device which takes sd card to see if you can unlock... Check out 96edwy video on YouTube on how to unlock after wp7

I have the same problem like arrirang .
When I put my SdCard to CardReader, windows 7 does not recognize SD Card in reader. If I try proces mentioned in video tutorial -> result is the same. Device USB Mass Storage is displayed in device manager with error code.
I was trying it in three computers (two with windows 7 x64 and one with Windows XP) - the result was allways the same.
Any one help me?
EDIT:
I have found this solution:
1. Connect USB cable from PC to phone.
2. At PC, enter WP7-Update-Cab-Sender folder.
3. Go to ‘if needed install this tool’ folder.
4. Install Setup-UpdateWP (x64 for 64 bits Windows and x86 for 32 bits Windows).
5. Copy DEV_STORAGELOCK.cab to WP7-Update-Cab-Sender folder.
6. Run WP7 Update Cab Sender.bat.
7. Then type S – (S)end Cabs to device.
8. After finished installation, close WP7 Update Cab Sender.
9. Disconnect USB cable from phone.
10. At WP7, launch StorageLock.
11. Click yes to unlock SD card.
12. Shutdown your phone.
13. Put your SD card into card reader.
14. Launch Partition Wizard Home Edition (download it here)
15. You should see 2 partitions on SD card.
16. Delete both of them.
17. Create a primary FAT32 file type partition.
18. Click ‘Apply’ to begin the process.
19. That’s all.
It works! I kid you not!!

mmajor said:
I have the same problem like arrirang .
When I put my SdCard to CardReader, windows 7 does not recognize SD Card in reader. If I try proces mentioned in video tutorial -> result is the same. Device USB Mass Storage is displayed in device manager with error code.
I was trying it in three computers (two with windows 7 x64 and one with Windows XP) - the result was allways the same.
Any one help me?
Click to expand...
Click to collapse
You should know that Installing wp7 locks your card so thats why it is not recognised by your pc..
Have you installed mango or another wp7 version on this sd card or succesfully on another?? I take it, you have no nokia devices that can format your card?
If you have mango installed transfer the storageunlock.cab to the phone followed by partition cab (got to be less than your total capacity) Reset your phone check if partition has taken effect..unlock using storage lock.turn off phone ..take sd card out into adapter into your pc now it should be readable (not full capacity bear in mind) you have to use easeus partition tool to format to full..
If you have mango on a different sd card and want to recover the corrupt one
Check this link http://forum.xda-developers.com/showthread.php?t=1286511
Or if your using just the same sd card you have to start over again and reflash from task 29 stock magdlr radio ie then storage unlock tool
Good luck

hey my problem is that wp7 in my hd2 shows internal memory of 175mb only even though my 8gb sd card is inserted in it..i cant seem to find a sloution to make my phone show the sd card memory..any solution please?

I have the same problem

it's probably because you installed wp7 without the sd card in it and you did not hard reset after installing rom...if so, you need to do a hard reset with the sd card in it for wp7 to recognize the card. or you have a bad card to begin with and the wp7 install had problems.

help my sd card, please !!!

hi everyone,
yesterday i've installed window phone 7 on my HD2 (my current OS is NAND android). After few hours try it, i'm really disappointed b/c it's too boring. i've formatted my SD card by mini tool partition 5.2 to back to android. When i format complete, i copy file from my laptop to sd card normally. after that, i boot my phone and try to copy a new file and it's done. But the problem is when i plus my sd card into phone, the phone see the card but my new file is not enable. I've formatted the card and my phone but nothing appear. Please help me

I don't know "mini tool partition" and I'm too lazy to search so I will take your words.
You just format your SD? Did you notice that it's just a 200Mo SD now?
You copied files to your SD "normally"... what do you mean by "Normally" (via card reader, in WM7, in MAGLDR... there's so many "normally" so it's difficult to know which one is yours).
You format the card and your phone... what do you mean by formating your phone? You put it in the card reader of your laptop, right clic on it and choose "format"??? And after format it's still booting?
I would like to help... help me to understand your problem.
(maybe English is not easy for you, I can understand but the result make it very difficult to understand... if this is the case, try again please).

I use this litle apps, its for free and works perfect
1. minitool partition wizard
2. panasonic sd formater
So u already got partition wizard than use panasonic formater after.
Should help u.
And also if u have digital camera with SD slot u can try to format in that camera. I have read about it somewhere.

Sd card wont show? Please help

when i installed the new windows 7.5 rom, it booted fine but it says a message that i cannot use this sdcard (emergency or turn off buttons are shown)
BUT NOW I CANNOT USE THIS SD AT ALL (WHEN I PUT IN SD READER OR MAGLDR NOTHING HAPPENS?????????????????????
PLEASE HELP

same problem

Searching the forum is the easiest way to find answers. Check this search link and you will find the information you need.

i rule123 said:
when i installed the new windows 7.5 rom, it booted fine but it says a message that i cannot use this sdcard (emergency or turn off buttons are shown)
BUT NOW I CANNOT USE THIS SD AT ALL (WHEN I PUT IN SD READER OR MAGLDR NOTHING HAPPENS?????????????????????
PLEASE HELP
Click to expand...
Click to collapse
Windows Phone 7 formatted the SD cart as FAT16, MAGLDR can't read this format.
You can reformated with a SD card reader and a any partion manager program, format as FAT32 and MAGDLR will work.

Dokiropi said:
Windows Phone 7 formatted the SD cart as FAT16, MAGLDR can't read this format.
You can reformated with a SD card reader and a any partion manager program, format as FAT32 and MAGDLR will work.
Click to expand...
Click to collapse
If they used the XBmod-Yuki 7720 ready ROM rather than HD2Owner's V1.20 WP7 Build 7720 [test ver. 1] their SD cards were formatted with Microsoft's WP7 proprietary SD format. This explains why their SD card readers could not recognize their cards. This by now is a well known issue, and therefore the search link I gave above may be quite useful.

I Had Same issue. just solved it now, i had to re-flash with the old rom with memory card inserted, installed DEV_STORAGELOCK.cab which unlockes your SD card again, unlocked my memory card, then switch off, put into USB flasher mode and reflash with 7720 image and now unlocked SD card, detects ok again now all working

got both my SD cards working now with 7720, had to update phone to 7392 first with one card before i could unlock it. the previous rom drivers were no good with some cards.
Couldnt use or detect the card with any partitioning or Formatting software until i unlocked it in Windows phone 7 with DEV_STORAGELOCK.cab
hope this helps some others?

[q] urgent help needed!!

Ok, I have CWM and I can access it. I cannot read from my External SD Card to install a rom. I can access my Internal SD but I do not have a rom in there.
I cannot boot into the previous ROM since I erased everything and when restarting I get boot loops. I need the tablet to get back to work tomorrow.
Any help would be greatly apreciated.
I have a ROM downloaded in my PC but when I connect the A500 to the PC (via USB) I cannot mount it to copy it there and flash.
HELP please!!!

What version of CWM do you have. I think the new one can install ROM from USB drive. Also try reformatting the SD card in a PC in FAT32, some time its just that and some time tablet is picky what SD card it can read and what it cant.

shin lucifer said:
What version of CWM do you have. I think the new one can install ROM from USB drive. Also try reformatting the SD card in a PC in FAT32, some time its just that and some time tablet is picky what SD card it can read and what it cant.
Click to expand...
Click to collapse
I was able to put the SD Card from my phone and flashed the new rom. The tablet is sill not recognizing the SD Card though. I put it on my PC and it wont detect it (cant format it that way). I put it on my printer and I am able to read from it but I cannot format it. It tells me that is right protected.
I need to find another way of formatting it.
Thanks for your help.

I suggest you get a new sd card. Clearly the one you're trying to use is not working.
I'm not even sure if you can "write protect" an SD. Maybe something on the micro SD adapter perhaps (switch)? Or an option in Windows Explorer (check the sd's "properties". If it says "write protected", then turn it off.

[Q] Can't format my sd card!

So about a week ago I downloaded new version of icecream tosti's ICS rom (v0.6) and booted into CWM to mount my sd card and move the zip file over. I noticed that it was taking longer time to move the file than it usually does but I let the process finish. I unmounted the card and went to install the zip from sd card but couldn't find it. I tried to move the file again and again but couldn't get it to copy the file onto the sd card. I tried moving files from the sd card onto the computer but that was not possible either. It wouldn't show me errors and complete the moving process but it actually didn't move anything. I thought there was something wrong with the sd card so I tried formatting it... no success!
I have used easues partition manager, mini tool partition manager, hp sd card utility, panasoic sd card formatter, tried formatting it through windows native options, used disk management, even tried formatting it through CWM but i kept on getting the same error, can't format. I was placing the micro sd card in a usb card reader and sd card reader in order to format it through computer. I have also tried using different computers but that didn't solve the issue. The problem is that every time I try to install a rom it reverts back to an older revision of the rom with old settings that I set before. It seems to me some how the sd card is locked in a previous state and it is write protected and won't let me format it.
Does anyone have any ideas on how I can solve my problem or does this mean the sd card is gone and I have to buy a new one?

I have exactly the same problem after using NexusHD2-ICS-4.0.3-CM9 V1.3. It seems this sd card was frozen, nothing on it can be changed. If I copy a file to it on computer, it shows copy successful, but that file cannot be read, and if refresh it shows nothing have changed in the SD card.
Anyone have any idea about this?
I have three broken micro sd cards now, two from WP7 and this one from ICS.

pacman1891 said:
I have exactly the same problem after using NexusHD2-ICS-4.0.3-CM9 V1.3. It seems this sd card was frozen, nothing on it can be changed. If I copy a file to it on computer, it shows copy successful, but that file cannot be read, and if refresh it shows nothing have changed in the SD card.
Anyone have any idea about this?
I have three broken micro sd cards now, two from WP7 and this one from ICS.
Click to expand...
Click to collapse
I waited a couple of weeks for someone to answer on this forum and tried all methods possible to format the sd card or revive it somehow but no luck so just recently purchased a new sandisk class 4 sd card hopefully this one doesn't go bad either. I just wish I knew why it was happening so I don't repeat the process again and end up damaging the card.

Have you tried to format with MAGLDR and after it on windows 7 pc ?

I did that, also followed this post:
http://forum.xda-developers.com/showthread.php?t=1283232
Contents on this sd card just refuse to change.

is there a solution to this coz im having the same problem and cant find a way to fix this

you can do it by this software's :
HDD Low Level Format Tool
MiniTool Partition Wizard
EASEUS Partition Master
Partition Wizard Home Edition
.
.
.
.
but i dont know how create swap and ext4 partitions on sd .

This happen because you formatted the card on the phone. I never recommend to format on the phone the cards but on PC. Try the application I posted on computer with FAT32 in 32768 unit size.