lol
looking in wrong section, found this under general:
http://forum.xda-developers.com/showthread.php?t=1030227
I recently got a nook color and despite working on my Samsung Vibrant, Touchpad, and Evo 3d,. I am having a terrible time getting the nook setup.
Nook Color blue dot on 1.2 (so 1gb partition)
I did the verygreen install to SD card with Cyanogen and everything runs fine, but I can't get market to install. I've tried renaming the files, re-installing, tried the abd push and nothing.
Used rom manager to download and flash recovery
When I try to boot into recovery, I get tux, then statement saying B&N emmc in place and gapps installer not found then shutdown. No recovery menu option given.
I've come to the point where I've decided just to do an emmc install.
Any good guides out there for rooting a 1.2 and installing cyanogen 7.1 and market apps?
TIA
http://forum.xda-developers.com/showthread.php?t=1030227&highlight=guide
Used rom manager to download and flash recovery
Click to expand...
Click to collapse
ROM Manager does not work when running CM7 on a SD card.
Related
I did a search for 'boot recovery' and read a few thread going back to May, but none of them seem to quite fit what happened to me. If I have missed the instructions, please link to them and I'll check it out.
First the setup:
My NC is stock 1.2 on the EMMC. I then followed the instructions in the Size-agnostic SD Card image and CM7 installer for SD Cards. The only step I cheated on was copying both update-cm-7.0.3-encore-signed.zip and gapps-gb-20110613-signed.zip to the SD card after the card was imaged. The rom and gapps installed and work as intended.
Next it was my intent to install update-CM7-dalingrin-OC-sd-063011.zip for a little speed boost. But I couldn't get it to boot into recovery with the various hold this button timings and choosing reboot from the power button options. I then went into ROM Manager and Flash ClockworkMod recovery, which flashed 3.2.01 to the EMMC. I have confirmed that by removing my CM7 SD card and successfully booting to recovery.
So now what? I would have thought the Rom Manager should have flashed the CWM recovery to the SD card, as that is what I had booted from. How can I uninstall the CWM from EMMC and force it to installed to the SD card?
Thanks,
Zhin
Did you just say up there "which flashed 3.2.01 to the EMMC"? why did you expect it "should have flashed the CWM recovery to the SD card"?
Anyway, if you want to run from uSD, then anything related to eMMC or files that have "emmc" on file name, then ignore, discard it.
In your case, after you booted into recovery (using power button, and its options), you should be all set.
I don't now what makes you went into ROM Manager and flashed it
votinh said:
Did you just say up there "which flashed 3.2.01 to the EMMC"? why did you expect it "should have flashed the CWM recovery to the SD card"?
Click to expand...
Click to collapse
Because I thought that when you flashed a rom to the SD card and booted off the SD card it was treated the SD card as the 'local disk'. With the EMMC just being seen as additional storage when you where running off the SD. So when I booted from the SD card and opened Rom Manager while running from the SD card, I should think it would have flashed the CWM to the SD card.
votinh said:
Anyway, if you want to run from uSD, then anything related to eMMC or files that have "emmc" on file name, then ignore, discard it.
Click to expand...
Click to collapse
I didn't say anything about using files that said emmc in the OP.
votinh said:
In your case, after you booted into recovery (using power button, and its options), you should be all set.
Click to expand...
Click to collapse
The only way I can get to recovery is to remove the SD. How can I make sure to install update-CM7-dalingrin-OC-sd-063011.zip to the SD card? Can the SD card be put back in after booting to recovery?
votinh said:
I don't now what makes you went into ROM Manager and flashed it
Click to expand...
Click to collapse
When it wouldn't boot into recovery after the clean install from my OP, I started to look for other options. When I launched Rom Manager it said there was no recovery option installed.
-Zhin
Zhindel said:
I then went into ROM Manager and Flash ClockworkMod recovery, which flashed 3.2.01 to the EMMC. I have confirmed that by removing my CM7 SD card and successfully booting to recovery.
So now what? I would have thought the Rom Manager should have flashed the CWM recovery to the SD card, as that is what I had booted from. How can I uninstall the CWM from EMMC and force it to installed to the SD card?
Thanks,
Zhin
Click to expand...
Click to collapse
Rom Manager is useless for SD installs; just don't run it. It's not like most Android apps that only look at filesystem names (/sdcard, /emmc, etc), it uses the hardware device names (/dev/block/...) for its manipulations and pretty much assumes an emmc install.
Having CWM on emmc isn't a problem, it won't interfere with running the stock NC software from an emmc boot. I haven't run stock in forever, I don't know what they had for a recovery boot, but there are "restore to stock" threads that will show you how to find the parts if you want to put it back.
What were you intending to do by installing CWM? The recovery that comes with the SD install is what flashes new builds for you, so you don't want to mess with it. You can install CWM on the SD as an alternate boot instead of a recovery (uAltImg and uAltRam instead of uRecImg and uRecRam) and use the u-boot that comes with recent CM7 builds to boot it if you want to play with it.
stolenmoment said:
Rom Manager is useless for SD installs; just don't run it. It's not like most Android apps that only look at filesystem names (/sdcard, /emmc, etc), it uses the hardware device names (/dev/block/...) for its manipulations and pretty much assumes an emmc install.
Click to expand...
Click to collapse
Ahhh ha! That makes sense. I never knew that.
stolenmoment said:
Having CWM on emmc isn't a problem, it won't interfere with running the stock NC software from an emmc boot. I haven't run stock in forever, I don't know what they had for a recovery boot, but there are "restore to stock" threads that will show you how to find the parts if you want to put it back.
Click to expand...
Click to collapse
I can restore to stock easily enough. I have an image of the stock install for easy recover for just these circumstances.
stolenmoment said:
What were you intending to do by installing CWM? The recovery that comes with the SD install is what flashes new builds for you, so you don't want to mess with it. You can install CWM on the SD as an alternate boot instead of a recovery (uAltImg and uAltRam instead of uRecImg and uRecRam) and use the u-boot that comes with recent CM7 builds to boot it if you want to play with it.
Click to expand...
Click to collapse
The install instructions for the dalingrin kernels said they were CWM flashable. I wasn't going to get too fancy, but maybe I should look at some of the alternate boot options.
Thanks!
Zhin
I accidentally did the same exact thing before I realized VG included his own recovery on the SD. From what I've read, to uninstall CMW from the emmc, you need to create a separate CMW SD and do a full restore to stock.
http://forum.xda-developers.com/showthread.php?t=931720
As for putting CMW on the SD, IDK. VeryGreen's method of just appending "update-" to rom file names and placing them on the root of the SD has worked for me.
I didn't say anything about using files that said emmc in the OP.
Click to expand...
Click to collapse
Because you were confusing as indicated in your thread, I was just suggesting eliminating anything about "emmc" if you intended to run off uSD. I did not say you did it, I just recommend it. For instance, Dalingrin OC kernel, there are several versions out there and anything with "emmc", then you should ignore them. That's all
I can restore to stock easily enough. I have an image of the stock install for easy recover for just these circumstances.
Click to expand...
Click to collapse
I assume you are all set.
Am I right? or still need help
I did the same thing and am too wondering how to remove it for warranty purposes. My Nook came w/ 1.2...does that mean 'd have to restore to stock 1.0.1 and then upgrade to 1.2?
dna59 said:
I did the same thing and am too wondering how to remove it for warranty purposes. My Nook came w/ 1.2...does that mean 'd have to restore to stock 1.0.1 and then upgrade to 1.2?
Click to expand...
Click to collapse
Get one of those 2
http://forum.xda-developers.com/showthread.php?t=1050520
Nook was running cm7
I went here http://forum.xda-developers.com/showthread.php?t=958748 and downloaded recoveryfix.zip and installed it
that was silly
now nook is stuck at book
How can I reflash cwm 3.0.2.8?
mrkkk said:
Nook was running cm7
I went here http://forum.xda-developers.com/showthread.php?t=958748 and downloaded recoveryfix.zip and installed it
that was silly
now nook is stuck at book
How can I reflash cwm 3.0.2.8?
Click to expand...
Click to collapse
Do you remember what version of the stock OS you had before you installed CM7? What happened, was that file that you downloaded is specific to a version of the stock OS.
Make yourself a bootable CWM card by following the directions HERE
Then download the attached file that goes with your stock OS version, and put it into the root of the CWM card.
Boot the device with that card, and flash the file. Remove the SD card when done, and reboot. You should now be back into your CM7. At this point to can flash CWM back onto the NC, or leave it off.
GMPOWER said:
Do you remember what version of the stock OS you had before you installed CM7? What happened, was that file that you downloaded is specific to a version of the stock OS.
Click to expand...
Click to collapse
Any way to determine that now?
mrkkk said:
Any way to determine that now?
Click to expand...
Click to collapse
Not really, the version 1.1.0 update came out at the end of January, and the guide that you linked to was made in February, so I would say that there is good chance that you were not on version 1.1.0. I would start with the 1.2.0 package, and work my way down.
No luck
Got meself a monster root pack - http://code.google.com/p/monster-rootpack/downloads/list
1.2.0 and 1.1.0 gave me install failed after rebooting
1.0.1 its still stuck at "Touch the future of reading"
Dont I want to flash a good copy of CWM back so that it can boot cm7?
mrkkk said:
No luck
Got meself a monster root pack - http://code.google.com/p/monster-rootpack/downloads/list
1.2.0 and 1.1.0 gave me install failed after rebooting
1.0.1 its still stuck at "Touch the future of reading"
Dont I want to flash a good copy of CWM back so that it can boot cm7?
Click to expand...
Click to collapse
The NC does NOT need CWM installed on the device to install or run CM7. A lot of people don't install it because of problems like this. I just did a restore of my CM7 image, and took the same steps as you. When it reboots and says install failed, I just shut it down and restarted right back into CM7.
The problem with the package that you had started with was the fact that besides the recovery files it installed a version of u-boot.bin that does not seem to be compatible with your device. The packages that I put up include each version specific u-boot.bin and recovery files.
I would flash the 1.2.0 file again, this time when it restarts and says install failed, just reboot the device, and it should go into CM7. At the very least, at this point you could do a full factory restore.
Update
before seeing your last message I built cwm 3.2.0.1 card using http://www.techerrata.com/dl.php?path=15&file=1gb_clockwork-3.2.0.1-eyeballer.zip
downloaded cm7 latest nightly
flashed it
applied titanium backup
was up in about an hour
BTW I do like CWM recovery, I can take nandroid backups time to time
Thanks for helping
I'm trying to find out if there is a way to install clockwork recovery on to the nook itself. I can boot it up with an sd card, but since I want to put muiu on the nook, it seems like a good idea to have recovery on the nook.
There don't seem to be any link to the latest version of cwr in the development thread, and it has been a couple of weeks since someone posted there asking for a link, but never got a reply.
I guess what I'm really looking for is a .zip of the latest clockwork recovery that I can install on the nook through the clockwork recovery I have on my sd card.
Any help, as always, is greatly appreciated!
Go to ROM manager in applications and select Flash CWM Recovery. It'll install to the emmc.
416inversed said:
Go to ROM manager in applications and select Flash CWM Recovery. It'll install to the emmc.
Click to expand...
Click to collapse
He's running off an SD card. ROM Manager only works with internal installations.
To the original poster: Once you flash CWR to the eMMC you no longer have a stock Nook for the purposes of warranty. Why not just go all the way and put CM7 on the eMMC? You can follow the directions here: http://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/
Make sure you choose the newest version of CWR (v3.2.0.1) when you do this!
patruns said:
He's running off an SD card. ROM Manager only works with internal installations.
Click to expand...
Click to collapse
Yeah, but CM7 on SD still has ROM Manager installed. OP wants to put CWM on the emmc. Hitting the "Flash CWM Recovery" selection in ROM Manager will put the latest CWM on their emmc. (I know it does, because I was noob enough to accidentally do it to my own Nook).
But that's what Crwly was asking about, right?
I am dual-booting CWR and CM7, both off the microSD. I used verygreen's installer to put CM7 on the microSD first, then installed racks11479's modified CWR. This does not satisfy ROM Manager, but it does let you backup, restore, and install zip packages off your 4th partition.
EDIT: Oh, and you do need another microSD to boot CWR, before you could use it to "flash" CWM SD Dualboot 0.1 to your current microSD.
I have been running CM9 on NC SD card for a ,couple of days now. I have CM7.1 in emmc. I find CM9 to be more phone-ey but I haven't had time to truly get used to it. I attempted to backup via Rom Manager today, it dumped me into recovery, tried to install gapps, failed & shut down. Anyone have issues like this. Not stopping production, but I love my backups. Just can't get enough.
beaujack said:
I have been running CM9 on NC SD card for a ,couple of days now. I have CM7.1 in emmc. I find CM9 to be more phone-ey but I haven't had time to truly get used to it. I attempted to backup via Rom Manager today, it dumped me into recovery, tried to install gapps, failed & shut down. Anyone have issues like this. Not stopping production, but I love my backups. Just can't get enough.
Click to expand...
Click to collapse
ROM Manager does not work with SD installs. If you try to use it, it tries to boot to CWM recovery to accomplish its tasks. You have no CWM recovery on an SD install. It is a special recovery script written by verygreen. That is what you see scrolling by after ROM Manager tells it to reboot.
But there is a way to put a custom CWM recovery as an alternate recovery on the SD. It has been specially modified to work with the SD installed partitions. It can back up your SD system for you. See my post here:
http://forum.xda-developers.com/showthread.php?p=22719241
Thanks, I appreciate the information. You are a pal.
Hi all. I have a Nook Color running CM 10.2 and am trying to upgrade it without success.
I have Superuser, CyanogenmodRom_Download, and TWRP downloaded.
Using CyanogenmodROM_Downloader configured to use TWRP I can successfully download a new Nightly. When I select Flash it takes me to Cyanboot. I select Internal eMMC Recovery and it brings up a notice saying that the Install Failed.
I tried using TWRP->Install->CyanogenROM_Downloader->cm-10.2-20131009-NIGHTLY-encore.zip. I'm not Wiping anything. Cyanboot into Internal eMMC recovery and the existing release instead of the update is installed.
Also, the only way I can tell which build is installed is with the CyanogenROM_Downloader. I looked around the web for something that would tell me where to look and didn't find anything. I also looked around /etc and didn't find anything obvious. Is there an easy way to tell what nightly build is installed?
I've been beating on this step for a couple of days now and looking around this site and the web and haven't found anything that helps although I'm sure it's out there somewhere. Any suggestions would be appreciated.
Thanks
Steve S.
Finding installed ROM
sjs_bebop said:
Hi all. I have a Nook Color running CM 10.2 and am trying to upgrade it without success.
I have Superuser, CyanogenmodRom_Download, and TWRP downloaded.
Using CyanogenmodROM_Downloader configured to use TWRP I can successfully download a new Nightly. When I select Flash it takes me to Cyanboot. I select Internal eMMC Recovery and it brings up a notice saying that the Install Failed.
I tried using TWRP->Install->CyanogenROM_Downloader->cm-10.2-20131009-NIGHTLY-encore.zip. I'm not Wiping anything. Cyanboot into Internal eMMC recovery and the existing release instead of the update is installed.
Also, the only way I can tell which build is installed is with the CyanogenROM_Downloader. I looked around the web for something that would tell me where to look and didn't find anything. I also looked around /etc and didn't find anything obvious. Is there an easy way to tell what nightly build is installed?
I've been beating on this step for a couple of days now and looking around this site and the web and haven't found anything that helps although I'm sure it's out there somewhere. Any suggestions would be appreciated.
Thanks
Steve S.
Click to expand...
Click to collapse
Go into system settings / about tablet (at bottom of settings)
About 3/4 down list you'll see the ROM installed. Also kernel info plus other info.
For updates ;
I go to this link and download directly.
http://download.cyanogenmod.org/?type=nightly&device=encore
Also I copy and paste the md5 sum into MD5 checker (free in play store), run the check.
Reboot into recovery using power button menu and install in TWRP there. I had too many problems using cm downloader, goo manager, etc.
nook color cm10.2 update problems
Thanks. That helps. I can determine the version now.
But I still can't get update to work. I downloaded from the location you gave using the browser and can see the file using TWRP and selecting install. This boots into the cyanoboot loader, there are two options enabled: 'Internal eMMC Normal' and 'Internal eMMC Recovery.' Normal seems to reboot -- which makes sense. Recovery re-installs the currently installed version. Also, using ADB I can see the new cm-nightly zip file in /storage/sdcard1/Download.
I don't see TWRP during the reboot. Should I??
I also don't get an option to select a new image to install. Should I?
I also tried copying the cm-nightly zip file to the /emmc directory and that doesn't seem to make any difference.
Sounds like a problem I had a while back
sjs_bebop said:
Thanks. That helps. I can determine the version now.
But I still can't get update to work. I downloaded from the location you gave using the browser and can see the file using TWRP and selecting install. This boots into the cyanoboot loader, there are two options enabled: 'Internal eMMC Normal' and 'Internal eMMC Recovery.' Normal seems to reboot -- which makes sense. Recovery re-installs the currently installed version. Also, using ADB I can see the new cm-nightly zip file in /storage/sdcard1/Download.
I don't see TWRP during the reboot. Should I??
I also don't get an option to select a new image to install. Should I?
I also tried copying the cm-nightly zip file to the /emmc directory and that doesn't seem to make any difference.
Click to expand...
Click to collapse
You may be having partition problems. I have had either lost the ability to install new nightlies or the ability to backup. Read the instructions through completely first. Get the info together and then start.
If you have a backup App like titanium backup, backup all files and data before anything else. Also if you can, do a backup in recovery before doing the following.
Check this link: http://forum.xda-developers.com/showthread.php?p=28457126#post28457126 by Leapinlar
I set up a 2Gb sd bootable card to run these from using the CWM recovery (If you need help check eyeballer's link below).
I put the partition repair files on it. Also the 1.4.3 Stock rom, the TWRP open recovery. zip 2.4.1.0 (http://forum.xda-developers.com/showpost.php?p=37554712&postcount=129), and the latest Rom you want to install and Gapps.
After following leapinlar's instructions including installing the 1.4.3 Stock rom (fixes other possible problems), then follow eyeballer's install for the Rom, Gapps and recovery here (http://forum.xda-developers.com/showthread.php?t=1030227&highlight=install+cm7+to+nook+color).
After booting and doing the initial CM setup return to recovery and VERY IMPORTANT ***restore only the data*** Not boot or system from your latest backup. This should get you back up and running. If you have a backup like Titanium restore "newer versions of apps" if you had to use an older recovery backup. Once you have everything set reboot into recovery and do another backup for safeties sake.
Including my wife's Nook I have four units and have needed to do this 4 or 5 times. Takes a little time but has always worked great. I keep the card available and update the Rom, Gapps or whatever else needs changing.
This link also contains a lot of helpful info. I have all these bookmarked on both my PC and Nook.
User Tips http://forum.xda-developers.com/showthread.php?p=25354258#post25354258