I did a search for 'boot recovery' and read a few thread going back to May, but none of them seem to quite fit what happened to me. If I have missed the instructions, please link to them and I'll check it out.
First the setup:
My NC is stock 1.2 on the EMMC. I then followed the instructions in the Size-agnostic SD Card image and CM7 installer for SD Cards. The only step I cheated on was copying both update-cm-7.0.3-encore-signed.zip and gapps-gb-20110613-signed.zip to the SD card after the card was imaged. The rom and gapps installed and work as intended.
Next it was my intent to install update-CM7-dalingrin-OC-sd-063011.zip for a little speed boost. But I couldn't get it to boot into recovery with the various hold this button timings and choosing reboot from the power button options. I then went into ROM Manager and Flash ClockworkMod recovery, which flashed 3.2.01 to the EMMC. I have confirmed that by removing my CM7 SD card and successfully booting to recovery.
So now what? I would have thought the Rom Manager should have flashed the CWM recovery to the SD card, as that is what I had booted from. How can I uninstall the CWM from EMMC and force it to installed to the SD card?
Thanks,
Zhin
Did you just say up there "which flashed 3.2.01 to the EMMC"? why did you expect it "should have flashed the CWM recovery to the SD card"?
Anyway, if you want to run from uSD, then anything related to eMMC or files that have "emmc" on file name, then ignore, discard it.
In your case, after you booted into recovery (using power button, and its options), you should be all set.
I don't now what makes you went into ROM Manager and flashed it
votinh said:
Did you just say up there "which flashed 3.2.01 to the EMMC"? why did you expect it "should have flashed the CWM recovery to the SD card"?
Click to expand...
Click to collapse
Because I thought that when you flashed a rom to the SD card and booted off the SD card it was treated the SD card as the 'local disk'. With the EMMC just being seen as additional storage when you where running off the SD. So when I booted from the SD card and opened Rom Manager while running from the SD card, I should think it would have flashed the CWM to the SD card.
votinh said:
Anyway, if you want to run from uSD, then anything related to eMMC or files that have "emmc" on file name, then ignore, discard it.
Click to expand...
Click to collapse
I didn't say anything about using files that said emmc in the OP.
votinh said:
In your case, after you booted into recovery (using power button, and its options), you should be all set.
Click to expand...
Click to collapse
The only way I can get to recovery is to remove the SD. How can I make sure to install update-CM7-dalingrin-OC-sd-063011.zip to the SD card? Can the SD card be put back in after booting to recovery?
votinh said:
I don't now what makes you went into ROM Manager and flashed it
Click to expand...
Click to collapse
When it wouldn't boot into recovery after the clean install from my OP, I started to look for other options. When I launched Rom Manager it said there was no recovery option installed.
-Zhin
Zhindel said:
I then went into ROM Manager and Flash ClockworkMod recovery, which flashed 3.2.01 to the EMMC. I have confirmed that by removing my CM7 SD card and successfully booting to recovery.
So now what? I would have thought the Rom Manager should have flashed the CWM recovery to the SD card, as that is what I had booted from. How can I uninstall the CWM from EMMC and force it to installed to the SD card?
Thanks,
Zhin
Click to expand...
Click to collapse
Rom Manager is useless for SD installs; just don't run it. It's not like most Android apps that only look at filesystem names (/sdcard, /emmc, etc), it uses the hardware device names (/dev/block/...) for its manipulations and pretty much assumes an emmc install.
Having CWM on emmc isn't a problem, it won't interfere with running the stock NC software from an emmc boot. I haven't run stock in forever, I don't know what they had for a recovery boot, but there are "restore to stock" threads that will show you how to find the parts if you want to put it back.
What were you intending to do by installing CWM? The recovery that comes with the SD install is what flashes new builds for you, so you don't want to mess with it. You can install CWM on the SD as an alternate boot instead of a recovery (uAltImg and uAltRam instead of uRecImg and uRecRam) and use the u-boot that comes with recent CM7 builds to boot it if you want to play with it.
stolenmoment said:
Rom Manager is useless for SD installs; just don't run it. It's not like most Android apps that only look at filesystem names (/sdcard, /emmc, etc), it uses the hardware device names (/dev/block/...) for its manipulations and pretty much assumes an emmc install.
Click to expand...
Click to collapse
Ahhh ha! That makes sense. I never knew that.
stolenmoment said:
Having CWM on emmc isn't a problem, it won't interfere with running the stock NC software from an emmc boot. I haven't run stock in forever, I don't know what they had for a recovery boot, but there are "restore to stock" threads that will show you how to find the parts if you want to put it back.
Click to expand...
Click to collapse
I can restore to stock easily enough. I have an image of the stock install for easy recover for just these circumstances.
stolenmoment said:
What were you intending to do by installing CWM? The recovery that comes with the SD install is what flashes new builds for you, so you don't want to mess with it. You can install CWM on the SD as an alternate boot instead of a recovery (uAltImg and uAltRam instead of uRecImg and uRecRam) and use the u-boot that comes with recent CM7 builds to boot it if you want to play with it.
Click to expand...
Click to collapse
The install instructions for the dalingrin kernels said they were CWM flashable. I wasn't going to get too fancy, but maybe I should look at some of the alternate boot options.
Thanks!
Zhin
I accidentally did the same exact thing before I realized VG included his own recovery on the SD. From what I've read, to uninstall CMW from the emmc, you need to create a separate CMW SD and do a full restore to stock.
http://forum.xda-developers.com/showthread.php?t=931720
As for putting CMW on the SD, IDK. VeryGreen's method of just appending "update-" to rom file names and placing them on the root of the SD has worked for me.
I didn't say anything about using files that said emmc in the OP.
Click to expand...
Click to collapse
Because you were confusing as indicated in your thread, I was just suggesting eliminating anything about "emmc" if you intended to run off uSD. I did not say you did it, I just recommend it. For instance, Dalingrin OC kernel, there are several versions out there and anything with "emmc", then you should ignore them. That's all
I can restore to stock easily enough. I have an image of the stock install for easy recover for just these circumstances.
Click to expand...
Click to collapse
I assume you are all set.
Am I right? or still need help
I did the same thing and am too wondering how to remove it for warranty purposes. My Nook came w/ 1.2...does that mean 'd have to restore to stock 1.0.1 and then upgrade to 1.2?
dna59 said:
I did the same thing and am too wondering how to remove it for warranty purposes. My Nook came w/ 1.2...does that mean 'd have to restore to stock 1.0.1 and then upgrade to 1.2?
Click to expand...
Click to collapse
Get one of those 2
http://forum.xda-developers.com/showthread.php?t=1050520
Related
I'm trying to find out if there is a way to install clockwork recovery on to the nook itself. I can boot it up with an sd card, but since I want to put muiu on the nook, it seems like a good idea to have recovery on the nook.
There don't seem to be any link to the latest version of cwr in the development thread, and it has been a couple of weeks since someone posted there asking for a link, but never got a reply.
I guess what I'm really looking for is a .zip of the latest clockwork recovery that I can install on the nook through the clockwork recovery I have on my sd card.
Any help, as always, is greatly appreciated!
Go to ROM manager in applications and select Flash CWM Recovery. It'll install to the emmc.
416inversed said:
Go to ROM manager in applications and select Flash CWM Recovery. It'll install to the emmc.
Click to expand...
Click to collapse
He's running off an SD card. ROM Manager only works with internal installations.
To the original poster: Once you flash CWR to the eMMC you no longer have a stock Nook for the purposes of warranty. Why not just go all the way and put CM7 on the eMMC? You can follow the directions here: http://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/
Make sure you choose the newest version of CWR (v3.2.0.1) when you do this!
patruns said:
He's running off an SD card. ROM Manager only works with internal installations.
Click to expand...
Click to collapse
Yeah, but CM7 on SD still has ROM Manager installed. OP wants to put CWM on the emmc. Hitting the "Flash CWM Recovery" selection in ROM Manager will put the latest CWM on their emmc. (I know it does, because I was noob enough to accidentally do it to my own Nook).
But that's what Crwly was asking about, right?
I am dual-booting CWR and CM7, both off the microSD. I used verygreen's installer to put CM7 on the microSD first, then installed racks11479's modified CWR. This does not satisfy ROM Manager, but it does let you backup, restore, and install zip packages off your 4th partition.
EDIT: Oh, and you do need another microSD to boot CWR, before you could use it to "flash" CWM SD Dualboot 0.1 to your current microSD.
I just bought an NC 1.2.0
no need to bore anyone with details but it is safe to say that it is virtually bricked. i would love a surefire way to get it completely back to the stock to start all over again.
i tried the repartitioning and reformatting technique using cm7 without any luck whatsoever. when i boot the device gets to the big N and "contains Reader mobile technology..." screen and never fully boots.
does anyone have a solution?
Presumably, one of those boring details involved writing an image to an SDcard:
eyeballer said:
Download 1gb CWM 3.2.0.1 sdcard image from here. MD5 of .zip: 1319739d33642ed860e8044c3d55aa56. (I made this based on work in this thread. credit: to cmstlist and DizzyDen, and kevank for hosting). You really only need the 1gb image ... no matter what the size of your card is. A smaller image will burn faster, and when you're done with the guide you can reformat the card anyway.
Click to expand...
Click to collapse
There's a decent chance the problem with your install is that you were using an older version of CWM on a newer NC, and it didn't write all the partitions correctly. Regardless, get the current version now.
Grab a B&N 1.2 image:
nemith said:
I modified the official 1.2 update to allow CWM to flash them. You can use these to upgrade to 1.2 or to return to stock.
There are two files. One replaces CWM with the stock recovery (good for going back to stock). The other doesn't replace CWM (but will replace uboot).
Other than that they are identical to the update from B&N.
update-nc-stock-1.2-keepcwm-signed.zip
update-nc-stock-1.2-signed.zip
Please note neither one of these are rooted yet.
Click to expand...
Click to collapse
and install zip from sdcard > choose zip from sdcard in CWM.
Another option, if will at least start to boot, is to start the boot process and then hold the power button down to shut it off. Repeat this 8 times in a row and the unit will initiate a self restore to the way it was shipped.
One thing to remember is that if you have a blue dot on the box for the nook, it has a different partition size and must be accounted for when installing CM7.
mvnsnd said:
Another option, if will at least start to boot, is to start the boot process and then hold the power button down to shut it off. Repeat this 8 times in a row and the unit will initiate a self restore to the way it was shipped.
One thing to remember is that if you have a blue dot on the box for the nook, it has a different partition size and must be accounted for when installing CM7.
Click to expand...
Click to collapse
If he has CWM on his internal recovery partition, I don't think 8 failed boots will work.
Also, the latest version of CWM can install CM7 correctly regardless of partitioning, though the old-style partitions are going to be preferable for most people running CM7.
Taosaur said:
If he has CWM on his internal recovery partition, I don't think 8 failed boots will work.
Also, the latest version of CWM can install CM7 correctly regardless of partitioning, though the old-style partitions are going to be preferable for most people running CM7.
Click to expand...
Click to collapse
Ah. I did not know that CWM installs on the internal recovery partition. Thanks.
mvnsnd said:
Ah. I did not know that CWM installs on the internal recovery partition. Thanks.
Click to expand...
Click to collapse
It does if you flash it from ROM Manager, regardless of whether you have ROM Manager running internally or on a CM7 SD install. If he hasn't done that, 8 failed boots should work, but I'm not 100% sure on a repartitioned device.
I have been running CM9 on NC SD card for a ,couple of days now. I have CM7.1 in emmc. I find CM9 to be more phone-ey but I haven't had time to truly get used to it. I attempted to backup via Rom Manager today, it dumped me into recovery, tried to install gapps, failed & shut down. Anyone have issues like this. Not stopping production, but I love my backups. Just can't get enough.
beaujack said:
I have been running CM9 on NC SD card for a ,couple of days now. I have CM7.1 in emmc. I find CM9 to be more phone-ey but I haven't had time to truly get used to it. I attempted to backup via Rom Manager today, it dumped me into recovery, tried to install gapps, failed & shut down. Anyone have issues like this. Not stopping production, but I love my backups. Just can't get enough.
Click to expand...
Click to collapse
ROM Manager does not work with SD installs. If you try to use it, it tries to boot to CWM recovery to accomplish its tasks. You have no CWM recovery on an SD install. It is a special recovery script written by verygreen. That is what you see scrolling by after ROM Manager tells it to reboot.
But there is a way to put a custom CWM recovery as an alternate recovery on the SD. It has been specially modified to work with the SD installed partitions. It can back up your SD system for you. See my post here:
http://forum.xda-developers.com/showthread.php?p=22719241
Thanks, I appreciate the information. You are a pal.
Have been running cm7 7.03 for quite some time originally installed using verygreens method with sd card cm7 installer 1.2. Decided I wanted to update to cm7 7.2 so thought I would update verygreens installer to 1.3 before updating to new version of cm7. Put update-genimage-1.3.zip on boot of sd card booted to recovery installed file and it appeared to install correctly rebooted and now I am stuck on Loading ... Any help would be greatly appreciated.
rmckeen said:
Have been running cm7 7.03 for quite some time originally installed using verygreens method with sd card cm7 installer 1.2. Decided I wanted to update to cm7 7.2 so thought I would update verygreens installer to 1.3 before updating to new version of cm7. Put update-genimage-1.3.zip on boot of sd card booted to recovery installed file and it appeared to install correctly rebooted and now I am stuck on Loading ... Any help would be greatly appreciated.
Click to expand...
Click to collapse
You do not install that zip that way. You have to unzip it to the .img file and burn to the SD with win32diskimager like you did the first time.
Sent from my Nook Color running ICS and Tapatalk
Thanks for the info. I was following instructions that indicated that I could put the update-genimage-1.3.zip on the boot portion of the sd and apply the update through cwm. I did not want to reimage my sd card as I have allot of information on it.
rmckeen said:
Thanks for the info. I was following instructions that indicated that I could put the update-genimage-1.3.zip on the boot portion of the sd and apply the update through cwm. I did not want to reimage my sd card as I have allot of information on it.
Click to expand...
Click to collapse
ok, don't know why it got stuck then. You used CWM recovery on emmc to flash it? The recovery script on SD would not install it properly.
Yes, that's correct. Now when I put the sd card in I just get stuck on screen that says loading and I have to take the card out to boot back into the nook software. I did make a backup of my emmc with cwm before I started this but I am unable to get into recovery at this time. I am not sure what my next steps should be. Start the process over with another sd card and then try and salvage the info on my original sd.
rmckeen said:
Yes, that's correct. Now when I put the sd card in I just get stuck on screen that says loading and I have to take the card out to boot back into the nook software. I did make a backup of my emmc with cwm before I started this but I am unable to get into recovery at this time. I am not sure what my next steps should be. Start the process over with another sd card and then try and salvage the info on my original sd.
Click to expand...
Click to collapse
I just read the instructions in thread and you do not use CWM recovery on emmc to flash that file. You are supposed to use the verygreen recovery script that is on the SD. By using CWM on emmc, you flashed the new recovery files to emmc and replaced CWM. That's why you can't get back in it. I think you can recover by putting the update- zip back in the root partition of the SD and trying to boot to the SD recovery. Then when you have got your SD repaired and flashed 7.2, you can reinstall CWM to emmc with ROM Manager.
Sent from my Nook Color running ICS and Tapatalk
I can certainly try that but I am now confused on which update.zip file to put on the boot portion of the sd to hopefully fix my sd card. Thanks for your help.
rmckeen said:
I can certainly try that but I am now confused on which update.zip file to put on the boot portion of the sd to hopefully fix my sd card. Thanks for your help.
Click to expand...
Click to collapse
the update-genimg1.3...zip. Be sure to boot to SD recovery and it should be ok.
Sent from my Nook Color running ICS and Tapatalk
Great thanks. Can you review for me how I make sure I boot to sd recovery. Really appreciate your help.
rmckeen said:
Great thanks. Can you review for me how I make sure I boot to sd recovery. Really appreciate your help.
Click to expand...
Click to collapse
If you have one of the newer u-boot.bin files... you hit "n" when booting up and select SD card... Recovery... that will be verygreen's recovery mode.
If you still have the original u-boot.bin from genimage 1.2 (not very likely at all... since CM7 has had new u-boot.bin's for a while now) you would have to use the old timing method of power + n for about 5 seconds.
When I try holding the n key the screen comes back with Loading ... but never moves past that screen. Actually the nook will not boot at all when the sd card is in even if I do not hold down the n key it goes right to the Loading ... screen and just hangs there. If I shut it down and remove the card it boots into the nook operating system fine. Any suggestions would be most appreciated.
rmckeen said:
When I try holding the n key the screen comes back with Loading ... but never moves past that screen. Actually the nook will not boot at all when the sd card is in even if I do not hold down the n key it goes right to the Loading ... screen and just hangs there. If I shut it down and remove the card it boots into the nook operating system fine. Any suggestions would be most appreciated.
Click to expand...
Click to collapse
I have attached a file to the board. Download and unrar this file. There should be 4 files there. Take your SD card out and put in your PC. Copy these files to the boot partition, overwriting the files that are there. Take the update-geniimg1.3...zip out and put the update- ...7.2 ...zip in. Then put the card back in the nook. Boot and while booting hold the n key. A boot menu should come up. Choose SD and recovery and continue booting. It should install cm7.2 and you are done. When in CM7, use ROM Manager to reinstall CWM to emmc.
EDit: I added a second file. Unrar and add these two files to the boot partition too.
Edit 2: Files removed after user successfully repaired SD
Transferred the files and did the update everything is running great. Thank you so much for your help it is greatly appreciated.
Hi all,
Previously i had "Dual boot cm7/cm9" on sdcard and when booting into recovery i was able to find my way around about flashing zips and everything.
Now i wiped SD card and installed, first generic-sdcard-v1.3-ICS-large.img , then CM9 from this thread http://forum.xda-developers.com/showthread.php?t=1526115.
Now i have 1) eMMC recovery 3.2.0.1 which has "normal" menu, and if i choose Apply zip from SD card, i cannot find CM9.zip which i downloaded from Goo Manager.
And i also have 2) SD recovery, which is just bunch lines of code with penguin in left corner and after lines of code it just shuts down.
How can i have "normal" recovery menu on SD recovery too?
Thank anyone for help!
Nikola_r said:
Hi all,
Previously i had "Dual boot cm7/cm9" on sdcard and when booting into recovery i was able to find my way around about flashing zips and everything.
Now i wiped SD card and installed, first generic-sdcard-v1.3-ICS-large.img , then CM9 from this thread http://forum.xda-developers.com/showthread.php?t=1526115.
Now i have 1) eMMC recovery 3.2.0.1 which has "normal" menu, and if i choose Apply zip from SD card, i cannot find CM9.zip which i downloaded from Goo Manager.
And i also have 2) SD recovery, which is just bunch lines of code with penguin in left corner and after lines of code it just shuts down.
How can i have "normal" recovery menu on SD recovery too?
Thank anyone for help!
Click to expand...
Click to collapse
This is all explained in my tips thread in my signature.
leapinlar said:
This is all explained in my tips thread in my signature.
Click to expand...
Click to collapse
If i understood correctly from your tips , there is NO CWM Recovery for SD installs,
so how do we do a backup or restore ROM then?
Nikola_r said:
If i understood correctly from your tips , there is NO CWM Recovery for SD installs,
so how do we do a backup or restore ROM then?
Click to expand...
Click to collapse
You read my tips correctly. But keep reading my tips further. There is a section there about installing an alternate CWM recovery for verygreen SD installs that can do backups and restores.
You should read all of Section B.
Sent from my Nook Color running ICS and Tapatalk
leapinlar said:
You read my tips correctly. But keep reading my tips further. There is a section there about installing an alternate CWM recovery for verygreen SD installs that can do backups and restores.
Sent from my Nook Color running ICS and Tapatalk
Click to expand...
Click to collapse
Thanks, will do.