So I've read in a few places that the fling stick does not work if you have invisible shield on your screen, because its to "sticky".
I know the Invisible Shield is sticky for the first couple weeks or so but it always becomes smooth as glass like I have it now.
My question is has anyone been able to use the two products together?
Related
Has anyone tried using the Seido holster with a adhesive skin like the Bodyguards or Invisible shield coating? I assume the skin is very thin but then the holster may be very tight and may not allow even the slightest addition in size (0.2 mm per Invisible shield website).
Seido Holster= http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=871
Invisible shield= http://www.invisibleshield.com/smartphone/at&t/tilt.php
Bodyguardz= http://www.bodyguardz.com/BodyGuardz_for_AT_T_Tilt_8925_p/nl-batt-1107.htm
Sediosedio, can you comment on the holster if it will allow the 0.2mm?
Thanks
FYI, it does.
Just to let you know I wanted to do this exact same setup.
The good news is it does fit... the bad news is that you may be unhappy with the invisible shield.
Do a seach for my posts there is one recently describing my experience with the shield. Long story short, it doesn't cover much of the device (hardly nothing on the sides) and it doesn't really give a nice clean look when installed (unless you have access to a cleanroom with 0% dust particles in the air).
It would have been nice if it did work, as protecting the back of the phone from scratches would have been nice (as that area is exposed in the holster). Also the constant moving in and out of the holster MAY rub against the top part of the phone and cause the shield to slowly peel off...on the flip side it may be lessening wear on the phone case itself.
I am sending mine back via money-back guarantee today and have already ordered the Seido rubberized case. Unfortunately their standard holster does NOT work with their case (it is 1mm thick) so I had to order the combo to get the specialized holster too.
So, I have an extra holster for an uncased phone....if anyone wants to buy it...
I have the Invisible shield and the Seidio rubberized case. Both fits together well.
I went with the rather expensive invisible shield since I know their products and simply licked it for the apple stuff which is lying around at home.
Anyone know where to buy one? I'd like one similiar to the one that came with it that covers up the entire screen area with a cut out for the speaker... and curved corners...
I bent a corner on the one that came with it and have some dust/etc that I can't seem to get rid of...
Martin Fields makes excellent screen protectors, though the one that came with it is pretty good quality. If yours is messed up though then I'd check them out. I had one on my Tilt for about a year and it still looks great.
Just look up touch pro on their site.
I'll second Martin Fields, or Boxwave. I had the boxwave on my 8525 for 1 year, then moved it to my 8925 for a year. It barely shows any Solitare scratches when turned off and viewing at an angle, you can't see the scratches at all when turned on! This was on the AntiGlare...
Martin fields does NOT have one for fuze but does for HTC Touch Pro, but interestingly the diagram shows no front-camera hole which should be great for fuze too. Has anyone used it for the fuze? does it come in 2 pieces and how good is it?
here is a ebay link to a great screen protector for the Fuze...I bought a 3 pack back in January and still have the 1st one on. Great quality....here is link:
http://stores.shop.ebay.com/Fabu-Stores_?_sid=17218646&_trksid=p4634.c0.m14&_pgn=3
Martin Field's Touch Pro screen protector is incredibly clear. It doesn't have a cut out hole for the front camera, which fits perfectly on my Fuze. They have also included a protector for the hard keys under the touch screen. As of right now, I can say that I am very satisfied. I would definitely recommend Martin Field.
I know it's a bit pricier, but I am a fan of the Invisible Shield: http://www.zagg.com/invisibleshield/htc-fuze-cases-screen-protectors-covers-skins-shields.php.
Basically the last protector you will need, plus you can get one to be just over the screen, or a full cover for the full phone. They are custom made for the actual phone or device you have, and will protect it well, fit the device, and protect it. Also rarely get dirt or dust in it.
Jumranb said:
I know it's a bit pricier, but I am a fan of the Invisible Shield: http://www.zagg.com/invisibleshield/htc-fuze-cases-screen-protectors-covers-skins-shields.php.
Basically the last protector you will need, plus you can get one to be just over the screen, or a full cover for the full phone. They are custom made for the actual phone or device you have, and will protect it well, fit the device, and protect it. Also rarely get dirt or dust in it.
Click to expand...
Click to collapse
I love my Invisible shield on every part of my phone except for the screen. In my opinion the material of the shield is to sticky for the screen, and causes some problems with using the stylus and sometimes your finger doesn't slide very well across it.
Just my opinion!
Thanks
JFlitt
i will like to see some pictures of the phones with martin fields and boxwave screen protectors please
I'd like to know about the boxwave and the martin fields regarding how well your finger can slide. The invisible shield is horrible for this...Yes its indestructable but not finger friendly.
Screen protectors
I'm another fan of the Invisible Shield by Zagg. It resists cat claws on the screen (w/o a scratch), doesn't need replacing ever, and I haven't had any issues with the stylus or fingers through the invisible shield. I guess it just depends on your fingers!
Yeh im personally not a big fan of the invisible shield. Have used it on a iPhone as well as a HTC Touch Diamond and have found that it works well on a capacitive screen but when it came to the HTC Touch Diamond which uses a resistive touch screen, it didn't work well at all.
The invisible shield has a squishy like texture which makes it a little difficult when in use with a stylus. I've upgrade to a HTC Touch Pro and decided to go back to a normal screen protector. I purchased the Exilim SPOC Screen Protector from eBay and have never been happier. Like the invisible shield, it doesnt scratch... quick and easy to apply without having to use any liquids and drying time. Just my preference...
I was just wondering how people who have them feel about screen protectors.
For one, would people recommend full body protectors or just screen. As well, I have used invisible shield before but for the fuze would the Bodyguardz shield be better? Also wondering if there is a difference in texture between the different protectors, as the invisible shield isn't the most slippery are others better for the touch screen?
colin725 said:
I was just wondering how people who have them feel about screen protectors.
For one, would people recommend full body protectors or just screen. As well, I have used invisible shield before but for the fuze would the Bodyguardz shield be better? Also wondering if there is a difference in texture between the different protectors, as the invisible shield isn't the most slippery are others better for the touch screen?
Click to expand...
Click to collapse
colin725, I'm using invisibleShield for my Fuze (Full body). It's living up to it's promise of scratch-proofing my device so far. But the downside is, it has become a lint magnet so I've put it back to my belt holster instead of my pocket.
~Glitch~ said:
colin725, I'm using invisibleShield for my Fuze (Full body). It's living up to it's promise of scratch-proofing my device so far. But the downside is, it has become a lint magnet so I've put it back to my belt holster instead of my pocket.
Click to expand...
Click to collapse
Yea, and I'm a pocket kind of guy. Guess that rules out full body. I'll probably just pick up an invisible shield screen. Thanks for the feedback.
I have doubts that the invisible shield is the best surface for a touch screen though, I'll probably wait before I decide to get one or not.
colin725 said:
Yea, and I'm a pocket kind of guy. Guess that rules out full body. I'll probably just pick up an invisible shield screen. Thanks for the feedback.
I have doubts that the invisible shield is the best surface for a touch screen though, I'll probably wait before I decide to get one or not.
Click to expand...
Click to collapse
The invisibleShield has that rubbery feeling which you won't like the first time when using TF3d, but you'll eventually get a hang of it.
If it was available already for my Fuze, I would really try those Martin Fields screen protectors, simply because it's not messy to apply upon the device.
Goodluck to your 'shield' hunting.
I use Bodyguardz and it sucks. Actually, I don't know of any word that can put it in the right/correct perspective.
I still have a few sreenprotectors that came with the sillicon cases I ordered. I'm gonna use one of those. Bodyguardz work great for overall protection. But it kills the screens responsiveness.
Die Bruine said:
I use Bodyguardz and it sucks. Actually, I don't know of any word that can put it in the right/correct perspective.
I still have a few sreenprotectors that came with the sillicon cases I ordered. I'm gonna use one of those. Bodyguardz work great for overall protection. But it kills the screens responsiveness.
Click to expand...
Click to collapse
Thanks for the feedback.
I have the Invisishield full body one and just yesterday took off a few of the full body pieces 'cause it gave the phone a "rough" feeling edge and also seemed to be a dirt magnet. Hard to describe exactly but I wouldn't put on all the little pieces again just the three big ones for the screen, back and d-pad area.
I installed the invisible shield just for the screen and hate it. I really want to get more of the OEM protectors that came with the device..I loved that one but I got a dirt bubble. *sigh*
Cant you wash the OEM one and reuse it?
i tried to peel it up to attempt that and messed up the corner
I was wondering what the best screen protector would be for my phone i was going to go with invisible shield but don't like the rough surface. I want something were you cant even tell its there.
i used a gadget guard on mine, just the screen not the full body. got it off ebay shipped for 7 bucks and showed up in 2 days for an extra buck or so you can get a car charger with it as well. i like the gadget guard cause it goes around the buttons on the bottom. a lot of the other ones stop near the buttons. if put on right you will see no ripples theres only a little spot that i had to peel back to get some junk out from under the protector. when i layed it back down it only shows slight orange peel if looked at on a angle.
closed duplicate post
I was wondering what the best screen protector would be for my phone i was going to go with invisible shield but don't like the rough surface. I want something were you cant even tell its there.
Closed duplicate poster