Related
Well, it's been 3 weeks since I bricked my phone. Mine was 1 of those that had no recovery mode so I had to send it in to get repaired. As I live abroad, the turn around time was a very LONG 3 weeks. Anyway, browsing the development section I see a lot of the devs have gone into over drive. There are SO MANY Rom's to choose from that frankly, I'm a bit overwhelmed at which to choose.
Bionix Final
Bionix Fusion 1.1
Froyo JPA Macnut
Froyo JPO Axura
AOSPish 1.4
MasterRom Final
Then there are all the kernels as well as the zmod4 mod. I mean wtf! lol!!
I was running Bionix 1.7 with Voodoo and it was unbelievably smooth and fast. Now I just don't even know where to start.
In your opinions , what combo would be the fastest, most stable, smoothest and closest one of all of those to Bionix 1.7 OC w/voodoo?
Wow, this is such a loaded question since the answer is always going to be one of opinion. But, since I have one of those, I'll throw in my $0.02 worth.
My phone was also bricked by the OTA. However, I was able to use ODIN to flash back to stock. Knowing I could do this gave me the confidence to try the Bionix 1.x versions (pre Final). When Fusion came out, I went to it and am very happy that I did. In my opinion, it is what Samsung should have release in the first place. (Samsung should really consider engaging this team - or other developers who are spending a lot of time tweaking the ROMs - as consultants on their future releases). So, to answer your question:
* They (both flavors of Bionix) are very stable
* Doesn't require a lag fix.
So, I'm pretty happy. The main difference (as I understand it) between Bionix Final and Fusion is whether you have all of the Samsung stuff included. Fusion doesn't include Touchwiz. I'm a Launcher Pro person, so Fusion is a better choice for me.
Now, regarding the Froyo builds. Depends on what you want to do with your phone. I view those builds as "bleeding edge." So, I want them to be around a little longer before I go that route. But that's just me.
Good luck.
It all depends on your personal preference.
If you are afraid to brick your new replacement and wait another 3 weeks I'd suggest going with Bionix Final stock kernel option, if you feel adventurous go with Bionix Fusion with non-stock kernel. I would, personally, wait for a stable Froyo ROM, current ROM's lack GPS drivers due to unavailability of the source from Samsung, but as soon as an official leak shows up or OTA roll out, I am pretty sure there will be a stable Froyo builds to choose from.
In my opinion, you cannot go wrong with Fusion JAC kernel, it smooths the phone to a degree I don't even see what stock OTA Froyo could bring to the table except Adobe Flash support. My understanding in the delays associated with Froyo release is the JIT (just in time compiler) hasn't been optimized for Hummingbird CPU, and Samsung is working on the optimization.
I recommend Bionix Fusion 1.1 with Project Core kernal 1Ghz. Its very stable, very fast and smooth and good battery life. There is also a Project Core 1.2 Ghz kernel but that one ran my cpu kinda hot with continuous use and I flashed down to the 1Ghz kernel. Not to mention Team Whiskey has put a lot of effort into making this rom as usable as possible. Far as that goes, every rom development team on here has lol. Thats my recommendation though.
That's not even a reasonable list of options. All froyo ROMS are not stable. And for anyone who thinks these froyo ROMs are sUpEr cOoL aWeSoMe, stable means everything works, and everything does not work currently on any froyo ROMs. So first thing you'd have to decide is if you want a ROM with all the features, personally, I don't get why people settle for Froyo minus the GPS. JIT isn't even functioning, so what are you really getting out of froyo at the time being? Just to say you have it? There really aren't any life changing factors comparing froyo vibrant roms to bionix 1.1.
I myself have a new vibrant, and am running a rooted JI6 OTA, just rooted for adfree and tether mainly, along with the OCLF just for ****s n giggles. The OCLF really only seems to speed up certain small things, like cache cleaning/app uninstalls/etc. Ive ran every 2.1 ROM on a vibrant and there's really no significant changes in speed, same linpack, same quadrant (even though it means nothing). My suggestion is bionix 1.1 if you really wanna try something new, but it won't change your life, just satisfy your need for change.
Bionix Fusion 1.1 w/ project core v1 @ 1.2 if your phone can handle it. I have flashed just about every rom that has been released including the froyo roms and to me, this is by far the best rom / kernel combo.
joe.kerwin said:
That's not even a reasonable list of options. All froyo ROMS are not stable. And for anyone who thinks these froyo ROMs are sUpEr cOoL aWeSoMe, stable means everything works, and everything does not work currently on any froyo ROMs. So first thing you'd have to decide is if you want a ROM with all the features, personally, I don't get why people settle for Froyo minus the GPS. JIT isn't even functioning, so what are you really getting out of froyo at the time being? Just to say you have it? There really aren't any life changing factors comparing froyo vibrant roms to bionix 1.1.
I myself have a new vibrant, and am running a rooted JI6 OTA, just rooted for adfree and tether mainly, along with the OCLF just for ****s n giggles. The OCLF really only seems to speed up certain small things, like cache cleaning/app uninstalls/etc. Ive ran every 2.1 ROM on a vibrant and there's really no significant changes in speed, same linpack, same quadrant (even though it means nothing). My suggestion is bionix 1.1 if you really wanna try something new, but it won't change your life, just satisfy your need for change.
Click to expand...
Click to collapse
JIT in the newer Froyo builds is working.. what are you talking about? Everything works with the exception of GPS. The only issue that you may encounter is GPS and battery life complaints (results may vary) and the occasional data drop problem.
joe.kerwin said:
That's not even a reasonable list of options. All froyo ROMS are not stable. And for anyone who thinks these froyo ROMs are sUpEr cOoL aWeSoMe, stable means everything works, and everything does not work currently on any froyo ROMs. So first thing you'd have to decide is if you want a ROM with all the features, personally, I don't get why people settle for Froyo minus the GPS. JIT isn't even functioning, so what are you really getting out of froyo at the time being? Just to say you have it? There really aren't any life changing factors comparing froyo vibrant roms to bionix 1.1.
I myself have a new vibrant, and am running a rooted JI6 OTA, just rooted for adfree and tether mainly, along with the OCLF just for ****s n giggles. The OCLF really only seems to speed up certain small things, like cache cleaning/app uninstalls/etc. Ive ran every 2.1 ROM on a vibrant and there's really no significant changes in speed, same linpack, same quadrant (even though it means nothing). My suggestion is bionix 1.1 if you really wanna try something new, but it won't change your life, just satisfy your need for change.
Click to expand...
Click to collapse
Acutally flash one of those ROM's before saying things don't work or they aren't stable..
They are stable, JIT DOES work, etc.
I've had great performance with Bionix Fusion using the Core v1 kernal (over clocked to 1.2). I threw the OCLF on top of it, but everything already ran great without it.
Sent from my SGH-T959 using XDA App
Masterâ„¢ said:
Acutally flash one of those ROM's before saying things don't work or they aren't stable..
They are stable, JIT DOES work, etc.
Click to expand...
Click to collapse
Things aren't wrong with stable ROMs. It's a port. A port is a port. Fact is when official froyo made for our MODEL of galaxy s, these froyo sources will be dropped. The 2.1 roms for us are built on a stable base built for our phones. They're just facts. Not discrediting any work done. If my friend asked a recommendation, I certainly wouldn't recommend an experimental ROM with dysfunctional features, and that's what this thread is about.
Sent from my SGH-T959 using XDA App
zephiK said:
JIT in the newer Froyo builds is working.. what are you talking about? Everything works with the exception of GPS. The only issue that you may encounter is GPS and battery life complaints (results may vary) and the occasional data drop problem.
Click to expand...
Click to collapse
Not efficiently. And yeah so your advice is a ROM with no GPS and data difficulties on a more than capable device? Dude, what are YOU talking about?
Sent from my SGH-T959 using XDA App
Sent from my SGH-T959 using XDA App
I've been running bionix fusion with project core v1 @1.2 and it's pretty good, however I had a random reboot so I might go down to the 1ghz, we'll see.
joe.kerwin said:
Things aren't wrong with stable ROMs. It's a port. A port is a port. Fact is when official froyo made for our MODEL of galaxy s, these froyo sources will be dropped. The 2.1 roms for us are built on a stable base built for our phones. They're just facts. Not discrediting any work done. If my friend asked a recommendation, I certainly wouldn't recommend an experimental ROM with dysfunctional features, and that's what this thread is about.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I have to agree/disagree with you. Even though 2.2 ROMs are ports, they are still very very good. And if you can live w/o the GPS.. Well, go with one of them
If you can't live w/o a GPS, then go with Master Rom or Bionix Fusion
Fusion with the Core kernel is awesome for me. 1.2GHz without increased voltage is nice. This is my first android device and I really like Launcher Pro.
Sent from my SGH-T959 using XDA App
joe.kerwin said:
That's not even a reasonable list of options. All froyo ROMS are not stable. And for anyone who thinks these froyo ROMs are sUpEr cOoL aWeSoMe, stable means everything works, and everything does not work currently on any froyo ROMs.
Click to expand...
Click to collapse
You seem to have a very different definition of the word "stable" compared to most people. IMO, "stable" means not rebooting or force closing randomly. What you describe is "not fully featured."
I myself have a new vibrant, and am running a rooted JI6 OTA, just rooted for adfree and tether mainly, along with the OCLF just for ****s n giggles. The OCLF really only seems to speed up certain small things, like cache cleaning/app uninstalls/etc. Ive ran every 2.1 ROM on a vibrant and there's really no significant changes in speed, same linpack, same quadrant (even though it means nothing).
Click to expand...
Click to collapse
Nutty. Fusion 1.1 w/ Core1zMod? Way faster than JI6 stock. Try placing a widget or calling up any app.
Kubernetes said:
You seem to have a very different definition of the word "stable" compared to most people. IMO, "stable" means not rebooting or force closing randomly. What you describe is "not fully featured."
Nutty. Fusion 1.1 w/ Core1zMod? Way faster than JI6 stock. Try placing a widget or calling up any app.
Click to expand...
Click to collapse
I've used it, it's pointless to argue. We're talking about milliseconds here. If you reopen and close a random app 10x. Each of our setups would hesitate on a few of them. I'm satisfied with speed on this thing. I'm more focused on new features. And your opinion is wrong, the gps and apparently data is not stable at all or at all times. Gps would be a component of the rom, which in turn makes the rom experimental. Its just made well enough to use daily.
Sent from my SGH-T959 using XDA App
Gentlemen, thanks for all of the replies. It's very much appreciated.
I am going to switch between a Froyo version and Bionix Fusion. I have absolutely no use for GPS where I'm located, never even used it once. So I'm going to give Froyo a try to see what it's like. Then in all honesty, unless it's unbelievable... I see myself going to Bionix Fusion as it's the most recommended here.
No matter which I eventually end up with, I think I'll be keeping it at 1Ghz. No OC for me until I run some serious tests. My OCing experience with computers tells me that OCing a unit without any additional cooling and having it sealed in a casing that must be close to as warm as hell, is a seriously bad idea. Even without extra juice, I can only see more harm coming from that than any actual real world benefits. But I'll know for sure after I see what the temp variations are like. (Anyone care to share their experience with that?)
Again, thank you all for the suggestions.
Why is there no love for AOSPish 1.4? Lol I really love that rom with JACS oc/uv kernel. Its an awesome rom if u want to go for a more stock android look. Either way u cant really go wrong with any of these roms. Developers are bustin their butts to constantly improve them. I think u should just try a few out and see what works best for u! Good luck
Sent from my SGH-T959 using XDA App
Hmmmmmmm Roms
Like most of the people who already posted I think people are getting way myopic about what is better yadida..........
My experience has been the one thing that never really gets resolved 100% is the GPS, and that is not that important to me
The Froyo's
The Axura's
The Bionix's
Eugenes Roms
Master's roms
All of the above are fantastic in their own right. The Better question is "what do i really need and want" then look at the roms and "back engineer" you needs and wants to the rom that most matches that criteria. What i see is this over active need to have the fastest most newest rom.... ok.......... so, that is like having a Massaretti in commuter traffic... you cannot utilize the power.... so look to your needs and wants and find a balanced rom thatfits that
oka1 said:
Like most of the people who already posted I think people are getting way myopic about what is better yadida..........
My experience has been the one thing that never really gets resolved 100% is the GPS, and that is not that important to me
The Froyo's
The Axura's
The Bionix's
Eugenes Roms
Master's roms
All of the above are fantastic in their own right. The Better question is "what do i really need and want" then look at the roms and "back engineer" you needs and wants to the rom that most matches that criteria. What i see is this over active need to have the fastest most newest rom.... ok.......... so, that is like having a Massaretti in commuter traffic... you cannot utilize the power.... so look to your needs and wants and find a balanced rom thatfits that
Click to expand...
Click to collapse
Very well said and great analogy. Don't forget there are tons of people who want a Ferrari or Lambo just for the wow factor while in traffic. Most custom roms give you that wow compared to stock.
The Nexus S is quite possibly the best but most frustrating phone I've ever had. I love the hardware and the android OS. I still get random reboots, sometimes sms notifications never show up, and sometimes when I get a phone call the phone becomes unresponsive.
I've been using the latest NSCollab rom for several versions and have never over/under clocked. I clear the dalvik cache after every update and clear data/restore with titanium backup whenever necessary.
I'll feel like I've been doing everything correctly, yet I'm still left with a phone that gives me a lot of grief. What's the problem here? How can I fix this? This is extremely frustrating with no obvious solution.
I had a lot of problems with the nexus s... Now i have a galaxy sii, but i still have the nexus. Using the nscollab, i had a looooot of problems, now the phone are with the stock 2.3.4, in my tests, everything is fine. I will sell it now.
Sent from my GT-I9100 using XDA Premium App
I don't know what kernel that rom uses but that and settings on voltages make the whole difference in stability. Something like stock rom with stock kernel or cm7 with stock or netatchys kernel are always good choices and will give you stability.
Just IMHO
Sent from my Nexus S 4G using XDA App
mariosergio2112, how much do you expect to get from selling it?
I believe NSCollab is Cm7 with netarchy and the stock gingerbread launcher -- nothing crazy here.
http://forum.xda-developers.com/showthread.php?t=959282
NSCollab 1.0.35
Android : GB 2.3.4
System : CyanogenMod 7.1 [RC1] [CM Team]
Kernel : Netarchy CFS 1.3.4 [Netarchy]
Truth of the matter is that I've yet to come across a ROM that's rock solid. I've tried them all and always had either lots of random reboots, bootloops, or sluggishness.
I went back to stock last Thursday and it's been butter smooth since. No problems or anything of the sort.
Sent from my Nexus S using XDA Premium App
That's both good and bad news. Good news: there's a fix. Bad news: I really like some of CM7's features, but I guess it must go.
I'll give the stock rom a shot I guess.
glasslung said:
That's both good and bad news. Good news: there's a fix. Bad news: I really like some of CM7's features, but I guess it must go.
I'll give the stock rom a shot I guess.
Click to expand...
Click to collapse
The Oxygen ROM is very stable aswell.
i tried several roms, but after all i came back to stock, it is stable and fast.. I do miss many features from cm7, but i guess i can live without it.
currently i'm trying to find a kernel with a battery life as good as stock one... i really miss bln ...
All I'm saying look into your voltage settings. Each phone will work different and you have to play with adjusting them. It also takes some time and patience.
Sent from my Nexus S 4G using XDA App
No matter what rom I use I end up going back to stock. I don't even think the net kernel is good enough.
glasslung said:
mariosergio2112, how much do you expect to get from selling it?
I believe NSCollab is Cm7 with netarchy and the stock gingerbread launcher -- nothing crazy here.
http://forum.xda-developers.com/showthread.php?t=959282
NSCollab 1.0.35
Android : GB 2.3.4
System : CyanogenMod 7.1 [RC1] [CM Team]
Kernel : Netarchy CFS 1.3.4 [Netarchy]
Click to expand...
Click to collapse
I will sell it in brazil, where i live, i think 1000 reais, i dont know yet.
Sent from my GT-I9100 using XDA Premium App
Vandam500 said:
Truth of the matter is that I've yet to come across a ROM that's rock solid. I've tried them all and always had either lots of random reboots, bootloops, or sluggishness.
I went back to stock last Thursday and it's been butter smooth since. No problems or anything of the sort.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
+1
no ROM I've tried has ever compared to stock, especially 2.3.4, when it comes to stability.
I tried Many ROMs but all before 2.3.4 (end of April?) and none was able to run for more than a few days without some kind of reboot/bootloop etc.
2.3.4 has been running flawlessly ever since.
Current uptime is like 1100+ hrs and that too cause i had to remove battery to change SIM card.
Hi,
I have installed NSCollab 1.0.35 on a week and have not problems on my Nexus S.
To resume, i had some endless bootloop and a lot of reboot on long calls.
Sent from my GT-I9100 using XDA Premium App
My 2 cents:
I'm on NSCollab 1.0.34, Netharky 1.3.4, KB3, OV to 1.2 Ghz, UV with protonvoltage. Gingerbread 2.3.4
I find this combo much faster than the stock one, smooth and pretty stable. Actually I have some reboots when I stress a lot my device, but they are rare.
So I don't want to renounce to Cyanogen features as the stock rom was really slow IMHO and I will give a try to NSCollab 1.0.35 very soon!
No problems in answering, good radio performance, faster than light (quadrant score: 3600) !! I can survive with a couple of reboot in a week!!
Too much porn?
Sent from my Nexus S 4G
Why don't you people stop confusing CM7 with a stable ROM? CyanogenMod and netarchy kernel are probably the most crappy android software that were ever made.
I suggest you use Oxygen ROM and Jame Bond kernel. No fancy quadrant benchmarks, stock ROM with basic functions like notification power control and text reflow in browser, zipaligned and all that stuff. Delete setcpu, delete juicedefender and other crappy so called battery savers, do not undervolt and do not touch the CPU frequency. Just let the ROM run like it is supposed to, don't fill it with all the bloatware you find on market that is said to increase performance or battery life, all they do is eating system resources.
I have yet to find a better combination like this for the nexus S, I am using the ROM since 3 days now without a single reboot/FC/freeze/bootloop. I am playing order and chaos MMO 2-3 hours and I can go through the full day without problems, the phone is responsive and simply works, no fancy sh*t.
Using the stock, all is fine..
Sent from my GT-I9100 using XDA Premium App
lvnatic said:
Why don't you people stop confusing CM7 with a stable ROM? CyanogenMod and netarchy kernel are probably the most crappy android software that were ever made.
I suggest you use Oxygen ROM and Jame Bond kernel. No fancy quadrant benchmarks, stock ROM with basic functions like notification power control and text reflow in browser, zipaligned and all that stuff. Delete setcpu, delete juicedefender and other crappy so called battery savers, do not undervolt and do not touch the CPU frequency. Just let the ROM run like it is supposed to, don't fill it with all the bloatware you find on market that is said to increase performance or battery life, all they do is eating system resources.
I have yet to find a better combination like this for the nexus S, I am using the ROM since 3 days now without a single reboot/FC/freeze/bootloop. I am playing order and chaos MMO 2-3 hours and I can go through the full day without problems, the phone is responsive and simply works, no fancy sh*t.
Click to expand...
Click to collapse
How does oxygen rom compare to oxygen rom with james bond kernel? I installed the oxygen rom last night and have had no problems so far. Time will tell how it holds up in the long run.
lvnatic said:
Why don't you people stop confusing CM7 with a stable ROM? CyanogenMod and netarchy kernel are probably the most crappy android software that were ever made.
Click to expand...
Click to collapse
Yeah... if it wasn't for that crap you would have **** for your ROM.
Sent from my Nexus S 4G using XDA App
After getting a Galaxy Note, I'm giving this phone to my dad and I want to have the most stable combination there is that is without any sort of lag. Can anyone provide any recommendations?
works for me
Ramads stock deodext rom with semaphore kernel no lag battery 48h....
infact odex unrooted would be best, maybe even last froyo js8 i think it was
$omator said:
infact odex unrooted would be best, maybe even last froyo js8 i think it was
Click to expand...
Click to collapse
Correct, after many months of testing, the best most stable, no lags, no low memory even after open close apps and 3D games, no bugs, and with a fully working wifi, ad-hoc and call recording integrated...
Its Darky 9.5 extreme edition based on the froyo js8.
Combination i find perfect is darky 9.5 with speedmod k13e kernel with ext4 fastest enabled in kernel, with scripts enable in kernel, and with fugu tweaks 2.3.5.zip.
Modem i use is zsjpg but bujp5 is also very good.
As i said this combination is simply amazing.
Using any gingerbread rom i would start lagging, and had 50 mg of ram after a few games and apps opened...but with the combination above no need to kill apps, the phone just runs anything with no problems at all, no low memory...it just works.
Besides...latest GB roms gave me wifi disconects, dont have fully working ad-hoc..and there is no call recording among other bugs and lags, low memory etc.
oSerX jvt rom with semaphore kernel..Its the best custom rom ..Stable as stock with solid batterylife..Its fast, smooth n simple...
I'm on the other side of the fence as others here. I'd recommend to stay stock with either Froyo or if maybe GBs JVR version. Since that seems pretty zippy, especially with browsing IMO.
The other plus with stock is the battery life is usually better. Maybe your dad might not use the phone as much as you, but it's still nice to have especially if he doesn't charge his phone as much...
Sent from my MB860 using xda premium
Battery life is a must, I'll give JS8 a shot and then try JVT if JS8 doesn't work out. What about GPS? Is there any decent fix out there for it?
Well GPS and battery life don't go together, GPS is a battery killer. If you have to use GPS then have a look here : http://forum.xda-developers.com/showthread.php?t=1239713
I use stock JVT + Semaphore kernel, and I'm very happy with it.
jc
3d_jc said:
Well GPS and battery life don't go together, GPS is a battery killer. If you have to use GPS then have a look here : http://forum.xda-developers.com/showthread.php?t=1239713
I use stock JVT + Semaphore kernel, and I'm very happy with it.
jc
Click to expand...
Click to collapse
I know GPS kills battery, but he doesn't use it very often. Once in a while when required.
My sgs is flying with doctors rom and my mix tweaks.
Sent from my GT-I9000 using xda premium
For you dad; I'd say go back to JS8 with speedmod. Or throw CM7 on there - I never have any stability problems with CM7.
JS8 or JSD (froyo roms).
In case he need gingerbread for some reason then I'd chose oSerX rom (odexed JVT rom).
most stable = latest froyo + no rooting + no custom kernels + no moding/theming and so on
Simplicity 1.5.1
The most stable gingerbread I've run.
No fc's and no noticeable lags. No reboots. I will not change till 4.0.
Sent from my GT-I9000 using XDA App
and ignore those people like the one above advertising gingerbread roms
idk are they paid for it or simply not thinking clear
$omator said:
and ignore those people like the one above advertising gingerbread roms
idk are they paid for it or simply not thinking clear
Click to expand...
Click to collapse
Paid??
Are you serious dude?
Get off the hooch mate
My opinion not yours.
Sent from my GT-I9000 using XDA App
you are advertising rom that is buggy, based on buggy gingerbread using buggy kernel... good luck in being 'stable' ;]
$omator said:
you are advertising rom that is buggy, based on buggy gingerbread using buggy kernel... good luck in being 'stable' ;]
Click to expand...
Click to collapse
Sorry to disappoint mate.
Been stable as a rock for me.
Sent from my GT-I9000 using XDA App
let me guess is it blazing fast also ?
Haha. Yeah. 56000 quadrant score.
Seriously though I've had not one issue with it. My daily has been running for about 3 weeks now untouched. All working well.
Only time I had an issue was when reverting back old market. Fc market issues. Put back new market and all good.
Sent from my GT-I9000 using XDA App
Say it isn't so. Just opened up xda app on my phone and I can't find it anywhere. Don't say that is the end of the best forum on here?
lol no it's not over!! It was moved into the Legacy and low activity devices which can be found here
http://forum.xda-developers.com/forumdisplay.php?f=686
we are forever alive!!
you know...if you favorite the CDMA Hero forum you never have to go searching for it
Sent from my Nexus S 4G using Tapatalk
Kind of bumbed. Just got my brother's old hero for my daughter...was going to make it a cm7 media player. Well, hoping for cm9. Hope there is still enough support. Any recommendations for a rom? I have run cm7 and liquid sense. She uses my rooted evo on 3.5 sense and cm7 nook color all the time.
You might want to go with one of Jaybob's rom from TeamHeroC, they have always been fast and non-buggy. CM6 : http://forum.xda-developers.com/showthread.php?t=731659
or CM7: http://forum.xda-developers.com/showthread.php?t=1090234 and also wouldnt hurt to throw in juwes RAM optimization script which can be found on Yaam. You can make these roms blazing fast and perfect for an alternative phone soley for music.
If you have experience with Firerats customs MTD partition ( http://romrepo.info/wiki/index.php?title=Firerat's_Custom_MTD_Partitions_(HeroC) ) This is another great thing to add so you dont have to worry about apps2sd.
moisaal said:
You might want to go with one of Jaybob's rom from TeamHeroC, they have always been fast and non-buggy. CM6 : http://forum.xda-developers.com/showthread.php?t=731659
or CM7: http://forum.xda-developers.com/showthread.php?t=1090234 and also wouldnt hurt to throw in juwes RAM optimization script which can be found on Yaam. You can make these roms blazing fast and perfect for an alternative phone soley for music.
If you have experience with Firerats customs MTD partition ( http://romrepo.info/wiki/index.php?title=Firerat's_Custom_MTD_Partitions_(HeroC) ) This is another great thing to add so you dont have to worry about apps2sd.
Click to expand...
Click to collapse
I have it set up with the last CM7 nightly and Darktremmors a2sd. pretty nice so far. using mobo player and with the processor plugin. I will try the teamheroc rom. Also running at 768mhz max with the smartassV2 governer.
thanks
thank you for telling me where that was. brought a smile back.
So I have an Evo which I don't use for anything. It has not number on it and I don't need it as a back up. I use it only for listening to music (speaker only) and taking and watching videos. Sometime I may connect it to wifi to download a certain app or to watch something on YouTube. So this thread could be called a survey I guess? But what's the best ROM out here for me to put on the phone in my case? I basically want battery life + performance + louder speaker (the Evo speaker sucks compared to my other phones sadly). I flashed the 4 kornerz (sorry if I misspelled) ROM and flashed the beats audio and the underworld kernel, but noticed a lag after flashing that kernel so I re-flashed the stock kernel.
I have not had time to actually use it and test out how it goes with my usage but I think it'll be alright?
I have also used Energy ROM (kills my batttery too quick) and CM7 (phone speaker isn't loud enough) so what other ROMs would you recommend for me? Or what mods or kernels would work with 4kornerz ROM that would ensure better battery life?
Sent from my SPH-D700 using XDA App
I'm doing the same thing with my Evolution - typing on it right now, actually.
I'm using deck's 1.3d, mason .15 kernel, beats audio addon with go launcher. Smooth as can be and I get tons of battery life in airplane mode.
roflboxer said:
I'm doing the same thing with my Evolution - typing on it right now, actually.
I'm using deck's 1.3d, mason .15 kernel, beats audio addon with go launcher. Smooth as can be and I get tons of battery life in airplane mode.
Click to expand...
Click to collapse
That's exactly the kind of answer I'm looking for thanks =). I thought about trying an ICS build but wasn't too sure if I wanted to because I thought it might have some bugs or be laggy or have not so great battery life or sound quality decreased. But I'm going to test out 4 kornerz for a bit then will try your settings next. Thanks for the reply =).
Wait.. what's the ROM your using lol? When I first read it I thought you were talking about one of the ICS builds but I'm starting to have second thoughts. I'm not very familiar with every ROM out here because I barely use the Evo but can you post the link to the ROM? Or at least tell me what's the title of its thread lol? And also your kernel pleeeaseee.
Sent from my SPH-D700 using XDA App
Decks 1.3d is his famous Gingerbread build. Search for it and you can't miss it. The thread title has decks, and. 1.3d in it I believe. It is legendary for being the best AOSP Gingerbread ROM with the best battery life and stability. Coupled with that kernel the above user mentioned, it will give you tremendous battery life! Much better than ICS at this beta phase.
Sent from my PC36100 using XDA
Is 1.3d better than 1.3? 1.3 is newer...
Art2Fly said:
Is 1.3d better than 1.3? 1.3 is newer...
Click to expand...
Click to collapse
1.3d would probably be a later version of it, as a, b, c, and d. Probably just minor fixes through out that version.
No, I clarified it. 1.3d is just a beta, 1.3 is stable. 1.3 is newer.
*New Downloads*
gingerbread evo 1.3 Stable
gapps 8-28-2011
gapps 8-28-2011 with Voicemail.apk
*Older Downloads*
gingerbread evo 1.3d beta
gingerbread evo 1.3b2 beta
gingerbread evo 1.3b beta
gingerbread evo 1.2.1 Stable
gingerbread evo 1.2 Stable
gingerbread evo 1.0
Click to expand...
Click to collapse
1.3 is newer, but i've had the best results with the 'beta' d version. runs like a beeeeeeeeeeeeeast.
Well I did find it and I will try flashing it as soon as I can. Is the stock kernel that comes with it the one that was recommended to me? Or where can I find the other kernel?
And I'm just kinda starting to get confused. Some people are saying 1.3 and some are saying 1.3d. Which one is better..? Logically thinking I would say 1.3d would be better since it probably just contains little fixes and nothing major updated but those little fixes may be a big problem to me without them so I think ill try out 1.3d unless I am told not to.
Sent from my SPH-D700 using XDA App
if you were having issues with cm7 you may experience the same with Deck's as his is just a custom version of cm7, yet designed to operate on Sprint more effectively.
You say the speaker wasn't loud enough with cm7? Did you adjust the settings in DSP manager?
I have 3 EVO's, 2 operational and on is my 3 year old's "phone," he is an angry bird addict! I have the phone on constant airplane mode and simply turn on wifi when I would like to connect. We are constantly asking him to turn it down so no sound problems here.
I would recommend the cm 7.2 rc1 from the cyanogenmod website, and don't forget gapps.
Again Deck's is based on cm7 though he hasn't updated in a long time and there have been many many improvements to the cm source since he stopped building. Cm7 is also still a work in progress, they are not dropping support for it, though they may bring cm9 to the EVO eventually 7 is the current supported version.
Honestly, I think the advice above is sound, but I still recommended deck 1.3 with Mason v14 kernal without hwa. Or if you want more battery, flash the slightly less stable v15rc G version. G for nonhwa. And then I would clock down to about 850mhz as your Max (don't know the exact value but the performance settings in deck shouldn't be too hard for you to figure out) and then use the wheatley kernel if you're on v15rc or intellidemandx if you're on 14. Smartassv2 would be my recommended governor, but it doesn't play well with media when the screen is off so you take your choice.
Sent from my PC36100 using XDA
Well sound was only a problem to me because I have an Epic 4G which, stock v.s stock, is louder. And I've tried CM7 on my epic and loved it but the sound was a problem the same as on the Evo. But I guess I would give up sound for better battery life lol. I'm going to flash deck's 1.3 right now. But I still can't seem to find the kernels you guys are talking about can someone please post the link to the thread?
Sent from my SPH-D700 using XDA App
So I just flashed the rom with the kernel.
I'm having one tiny problem.
I didn't install gapps (don't really need it) so I tried to bluetooth a file explorer.
I've noticed with bluetooth on the phone reboots? (It happened twice so far)
Ill keep trying the ROM out and see if I have more reboots. If its just bluetooth related then its not a problem
Sent from my SPH-D700 using XDA App
One more thing. Not sure if its the ROM or my phone but the power button seems to not work so well. It turns off the screen normally but turning the screen back on is the problem. It doesn't turn on by just pressing it I have to hold it down and then the power menu pops up and the screen turns on.
Sent from my SPH-D700 using XDA App
What ROM and kernel did you flash? Sleepiness is due to kernel undervolting issues... or kernel related at least. Bluetooth would be the same I would gather... sounds like stock kernel for you!
My original EVO loved underclocking, and I could squeeze a few precious hours out of the battery with the right kernel, governor and voltages. My replacement however will not undervolt at all... not even 25 mA... so each evo is different. I am of the opinion that stock is going to give you the best overall performance.
Click to expand...
Click to collapse
...are you guys kidding me right now???
Mason kernel is for ICS, as in not Gingerbread so it will break things on Decks 1.3... come on man!!!
If you really want a great experience just flash CM 7.2 please and leave it be because those guys know Android and what it needs to love you long time... I apologize for the inconvenience of bad information...
imheroldman said:
...are you guys kidding me right now???
Mason kernel is for ICS, as in not Gingerbread so it will break things on Decks 1.3... come on man!!!
If you really want a great experience just flash CM 7.2 please and leave it be because those guys know Android and what it needs to love you long time... I apologize for the inconvenience of bad information...
Click to expand...
Click to collapse
But on the kernel's thread it said for "AOSP ROMs" and I did flash it and it worked. It does say it would also work on ICS tho.
I think I may just go to CM7 tho.
The april 8th update is better than the official one?
Sent from my SPH-D700 using XDA App
Here is what you want...
CM 7.2
Wipe:
All/factory reset
Cache
dalvik cache
System
Boot
Then flash the ROM, no gapps for you if you don't want.
Mason says it apparently works on GB or ICS, but I don't see how that could actually be possible... though I am not a kernel dev... but your issues do seem to stem from a kernel issue...
I'd imagine using a sense kernel based rom like swagged out stock N would get you the best musical results, since it has a kernel that was specifically built for the EVO, and not something AOSP generic. Maybe throw the zip file in for beat audio, or use poweramp instead.
Swagged out stock N 2.0.9 with universal aggressive lionfish 1.8 is doing REALLY well for me. It uses the go launcher, instead of sense.
haha luckily ICS is based off of a GB Kernel, Tiamat. Mason has two flavors of his popular kernel, the "G" version which CAN be used for Gingerbread AND NON-HWA ICS Roms, and the "I" version which is strictly used for HWA enabled ICS roms.
also jamieg71 has aosp gb build that is being updated more recently if you wanna check that out havent run it personally but if its anything like his ics build it will be great