Database Users

Question for the experts (Screen issue)

Hi
I installed the phone skin called: Tachi PhoneCanvas
You can find it here: http://forum.xda-developers.com/showthread.php?t=499076
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice skin I tought, but after installing I performed a softreset and then
My screen went mad showing the attached picture (Sorry for the quality), Uni was stucked at that screen not working soft or even hard reset.
After taking out battery and place it again I tried a hard reset and this time worked, all is working normal now but every soft reset I made since that event it appears the same freaky screen...
Any ideas of what is going on with my Uni is more than apreciated
Thanks in advance

Does it continue to boot now after the freak screen? Or do you have to do battery & hard reset each time after soft reset?

JonMorgan said:
Does it continue to boot now after the freak screen? Or do you have to do battery & hard reset each time after soft reset?
Click to expand...
Click to collapse
It continues to boot normal
But also some unexpected freezes
Any clue?
Today I´ll try to reflas the ROM and see if this helps, also think on reinstall the O2 boot screen

orb3000 said:
It continues to boot normal
But also some unexpected freezes
Any clue?
Today I´ll try to reflas the ROM and see if this helps, also think on reinstall the O2 boot screen
Click to expand...
Click to collapse
Yes I was just going to say install a new boot screen. Mine went feaky for the first time just 2 weeks ago. However it didn't affect the boot-up, just looked funny. However, I expect that if the picture was affected, it could also quite have easily been the boot up too.
I have a very nice boot screen which I copied from someone else* and added my own bits...
(*someone else, sorry I forgot who, but you're quite welcome to step forward)

JonMorgan said:
Yes I was just going to say install a new boot screen. Mine went feaky for the first time just 2 weeks ago. However it didn't affect the boot-up, just looked funny. However, I expect that if the picture was affected, it could also quite have easily been the boot up too.
I have a very nice boot screen which I copied from someone else* and added my own bits...
(*someone else, sorry I forgot who, but you're quite welcome to step forward)
Click to expand...
Click to collapse
Thanks mate
I´ll report later what happened
Cheers,
EDIT: Reinstalled boot splash screen and screen does not appears, still same freaky screen
Now reflashing, post later

Problem got serious
Well
After doing a reflash, upgrade utility finished 100% ok
but when doing the first hard reset...again!!!!!!!! the freaky screen!!!
And now it not passes from there, so I cant enter to windows
i leaved the battery out so it wont discharge...
Please any help is more than apreciated!!
It´s my main phone and I´m really worried
I will post a little video later of it´s behaivour
EDIT: I solve it using mtty from this post!!
http://forum.xda-developers.com/showpost.php?p=1097645&postcount=4
I´m happy!!! my wife gave me moral support durning all the process

Splash screen how to
After all my problem now solved
The only thing I couldn´t solve is to put any splash screen again to my Uni
So every time I reboot I see only a black screen with the ROM info
I tried the different methods posted and non result positiv to put any splash again (tested several)
Any advice?
Thanks,

Felicidades
It is good to know that your uni is back.
I hope I see you soon in Coatepec
Saludos

mochoab said:
It is good to know that your uni is back.
I hope I see you soon in Coatepec
Saludos
Click to expand...
Click to collapse
Thanks mate!
I´m back again!
Hope to see you soon
Saludos,

Orb, this one worked for me on Tomal 6.1 build 21048.1.6.3
(now how come that uploaded ok!?)

JonMorgan said:
Orb, this one worked for me on Tomal 6.1 build 21048.1.6.3
(now how come that uploaded ok!?)
Click to expand...
Click to collapse
I´ll test in on 8.9 regular I´l post later
Thanks a lot!

orb3000 said:
I´ll test in on 8.9 regular I´l post later
Thanks a lot!
Click to expand...
Click to collapse
Let me a PM if it fails and I'll provide a step by step...
regards

tomal said:
Let me a PM if it fails and I'll provide a step by step...
regards
Click to expand...
Click to collapse
Hi Tomal
Attached the image I was using before my screen problem
It´s the original one from O2
Thanks a lot for your help!
Oops! something hapenned cant upload the splash
Invalid file

orb3000 said:
Hi Tomal
Attached the image I was using before my screen problem
It´s the original one from O2
Thanks a lot for your help!
Oops! something hapenned cant upload the splash
Invalid file
Click to expand...
Click to collapse
rename the file to abcd.zip ...

tomal said:
rename the file to abcd.zip ...
Click to expand...
Click to collapse
Finally here it is!
As I use winrar had to change to winzip to do this
Thanks

Hi Orb,
Find the splash image attached.
It will be flashed as a rom image so please do necessary backup of your data and then start flashing. Please note that you need to re-flash the OS image (i.e. my v8.5 or v8.9 etc.) once again after the splash flash is complete.
Step by step:
1. Backup the data from your device
2. Connect the USB cable
3. Flash Splash (rom) image (do not reset the device at this stage)
4. Flash OS (rom) image
5. Hard-reset your device
...
Cheers

tomal said:
Hi Orb,
Find the splash image attached.
It will be flashed as a rom image so please do necessary backup of your data and then start flashing. Please note that you need to re-flash the OS image (i.e. my v8.5 or v8.9 etc.) once again after the splash flash is complete.
Step by step:
1. Backup the data from your device
2. Connect the USB cable
3. Flash Splash (rom) image (do not reset the device at this stage)
4. Flash OS (rom) image
5. Hard-reset your device
...
Cheers
Click to expand...
Click to collapse
Hi Tomal
Thanks you very much!
I´ll do it over the weekend
Cheers,

Please help...my HD2 stuck in " Stick together " screen

please help me...i up a lot of "rom ship" but my HD2 still stuck at " stick together screen" although all process of uploading rom is ok. I've used Task 29 but cant help me...
i dont know why...please help me
thank you all.
here is my bootloader and my sitiuation:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

cant really see what you're boot-loader says picture to small, what have you done to get to this?

Demon_man said:
cant really see what you're boot-loader says picture to small, what have you done to get to this?
Click to expand...
Click to collapse
U can see big picture in here :
Code:
http://lh6.ggpht.com/_nKBDPu7hzaw/TCYtMkhVVEI/AAAAAAAAA_w/UUa7iKqnI-4/s128/IMG_0018.JPG
http://lh3.ggpht.com/_nKBDPu7hzaw/TCYtMwhZ9tI/AAAAAAAAA_0/qOC5MIT3pkw/s128/IMG_0019.JPG
i do nothing...
first my brother have this...and used it nomally....( when i check the recieved call time and outgoing call time about 10 hours....) but after my brother did somthing with my hd2 ( he didnt remember what he did..)
when i recieved hd2...it sometime can boot into OS...but sometime automatic reset and stuck at logo "HTC" screen...after that i up rom ship...but nothing better....now it stuck at "stick together" screen.. ( .

hlpdt10 said:
U can see big picture in here :
after that i up rom ship... .
Click to expand...
Click to collapse
what does that mean?? do you mean you tried to update the shipped ROM?? if so then please write this because it makes more sense for people to understand
and the pictures are still small on them links, just to let you no
have you tried a hard reset ?

Demon_man said:
what does that mean?? do you mean you tried to update the shipped ROM?? if so then please write this because it makes more sense for people to understand
and the pictures are still small on them links, just to let you no
have you tried a hard reset ?
Click to expand...
Click to collapse
Yes...i try update a lot of shipped rom( asia WWE shipped rom, tmous........ and try to hard reset alot of time) but nothing better..
Sorry..i 've updated a big screen about my bootloader

I see you have hspl have you tried to flash a custom ROM

Demon_man said:
I see you have hspl have you tried to flash a custom ROM
Click to expand...
Click to collapse
yes i tryied PQ 's rom....but nothing better...
Now...it can boot into the OS again but i'm afraid that it can happen again( sometime OK sometime NG )
i captured my information for u :

Now it auto restart after some minutes and stuck again...(

this is very strange, ill be honest im not the best person to speak to really, you couple ask in the rom section, or advance edit your first post and ask for it to be moved to the rom section, you might get a little more help mate, sorry i cant help though hope you find a solution

sounds like the wrong hspl was used. go to mskips tutorial on flashing a custom rom for the leo. is yours the 1024 leo hd2 or the 512 leo hd2.

sherlockpwnz said:
sounds like the wrong hspl was used. go to mskips tutorial on flashing a custom rom for the leo. is yours the 1024 leo hd2 or the 512 leo hd2.
Click to expand...
Click to collapse
512 LEO HD2 is mine....

hlpdt10 said:
Now it auto restart after some minutes and stuck again...(
Click to expand...
Click to collapse
run task29 to clear your rom space from all the flashing, reflash your chosen rom using usb, and check your battery connections, some possibility of a bent pin maybe.

samsamuel said:
run task29 to clear your rom space from all the flashing, reflash your chosen rom using usb, and check your battery connections, some possibility of a bent pin maybe.
Click to expand...
Click to collapse
i tried Task 29 before , and i replace my battery with good one from my friend ( he 's using his LEO nomal) but nothing better...

samsamuel said check the pins mate, the battery can be fine if the contacts re at all bent on the phone it wont boot double check ??

here my picture about my pin and battery:

hhmm looks all ok to me, I'm sorry this doesn't help you in anyway at all but there seems to be a few people this is happening to of late.

now my LEO cant turn on..poor me...

hey man,
i just had the same problem and i was freaking out for a bit. i was stuck on the screen forever.... but i knew i was in a okay situation because i was still able to go into bootloader mode. anyways, i tried to format my sd card from my tools>>format sd card>> after that i restarted and my phone would hang on the tmobile splash screen.
i then tried to flash miri rom and it was still hang. i reflashed the last known working rom which was energy rom and it booted up perfectly.
im curious how your phone wont turn on? sorry to hear that man.

same problem with my hd2
i bought this phone on ebay and have the same exact problem it is stuck on "stick together" screen some times its boot and work normaly but after 3-5 minutes it reset again back to "stick together screen" this is frustaiting please help

I find this happening to me afew times a day actually, it gets rather annoying but I find taking the battery out for about a min or two and then trying again helps usually. It's a pain when you have to pull the battery 5+ times just to get your phone to start back up.

GPS problem

Hi guys and gals, i recently purchased a htc magic
i have been having trouble getting gps to work.
i did a bit of reading and found out how to do a
factory test. So once it starts i checked my gps and the message i got was
(gps failed -8) has anyone come across this error ? is it fixable
or does it mean its stuffed ?
any help would be much appreciated thanks

apprentice01 said:
Hi guys and gals, i recently purchased a htc magic
i have been having trouble getting gps to work.
i did a bit of reading and found out how to do a
factory test. So once it starts i checked my gps and the message i got was
(gps failed -8) has anyone come across this error ? is it fixable
or does it mean its stuffed ?
any help would be much appreciated thanks
Click to expand...
Click to collapse
Sounds to me that you either have
Hardware malfunction
Problem with your rom.
Is your phone rooted with a custom rom installed?

the phone is rooted im trying to put custom rom on but
i cant get the flash recovery to load up on startup.
currently i have android 2.1 installed

apprentice01 said:
the phone is rooted im trying to put custom rom on but
i cant get the flash recovery to load up on startup.
currently i have android 2.1 installed
Click to expand...
Click to collapse
Could be the rom, could be the hardware, could be the radio.

thanks for your help guys is there anyway to check which one it might be ??

apprentice01 said:
thanks for your help guys is there anyway to check which one it might be ??
Click to expand...
Click to collapse
Process of elimination.
Flash the stock rom and double check your required spl/radio combination.
If it still doesn't work then it's hardware.
If it does then it's either the rom or the radio.
Good luck.

I have run system info says got no radio
here's a print out
# Build #
ID=ERE27
Product=e1000_klx1
Device=e1000_klx1
Board=unknown
CPU ABI=armeabi
CPU ABI 2=N/A (API Level 8)
Manufacturer=unknown
Brand=yusu
Model=e1000_klx1
Type=user
Tags=test-keys
Finger Print=yusu/e1000_klx1/e1000_klx1/unknown:2.1/ERE27/eng.root.20101014.171514:user/test-keys
Time=1287048036000
User=root
Host=talcon-ubuntu
Hardware=N/A (API Level 8)
Radio=N/A (API Level 8)
Bootloader=N/A (API Level 8)
Incremental Version=eng.root.20101014.171514
Release Version=2.1
SDK Version=7

apprentice01 said:
I have run system info says got no radio
here's a print out
# Build #
ID=ERE27
Product=e1000_klx1
Device=e1000_klx1
Board=unknown
CPU ABI=armeabi
CPU ABI 2=N/A (API Level 8)
Manufacturer=unknown
Brand=yusu
Model=e1000_klx1
Type=user
Tags=test-keys
Finger Print=yusu/e1000_klx1/e1000_klx1/unknown:2.1/ERE27/eng.root.20101014.171514:user/test-keys
Time=1287048036000
User=root
Host=talcon-ubuntu
Hardware=N/A (API Level 8)
Radio=N/A (API Level 8)
Bootloader=N/A (API Level 8)
Incremental Version=eng.root.20101014.171514
Release Version=2.1
SDK Version=7
Click to expand...
Click to collapse
That would be the problem. I'm sure of it. Then again... if you had no radio then I fail to see how your phone is even booting. You're probably using a rom that is incompatable with the radio that you have installed. What rom are you using?
Reboot to bootloader (power and volume down) and tell us everything that you see on the screen.
You might want to take the sdcard out first so you don't accidently flash anything.

thanks for the reply, when I restart and press volume down and power button I get message and its says factory mode and there is a few options mainly testing hardware also clear flash and that's it, when I posted the results I can see under heading of bootloader said N/A, I have tried many times to load different ROM but just can't I used ROM manager and followed other ways shown on these forums but for some reason this phone is stubborn and can't modify it

apprentice01 said:
thanks for the reply, when I restart and press volume down and power button I get message and its says factory mode and there is a few options mainly testing hardware also clear flash and that's it, when I posted the results I can see under heading of bootloader said N/A, I have tried many times to load different ROM but just can't I used ROM manager and followed other ways shown on these forums but for some reason this phone is stubborn and can't modify it
Click to expand...
Click to collapse
So there wasn't any text on that screen?
Was it a white screen or colorful?
We need the SPL version, radio version, S-ON or S-OFF etc.

thanks for response, I can't see spl version, when it loads factory mode, its got black background with yellow text and blue highlight under heading of version it has uboot ver 1.1.6. the headings are full test item test, version clear flash which is nand type flash and. reboot nothing else

apprentice01 said:
thanks for response, I can't see spl version, when it loads factory mode, its got black background with yellow text and blue highlight under heading of version it has uboot ver 1.1.6. the headings are full test item test, version clear flash which is nand type flash and. reboot nothing else
Click to expand...
Click to collapse
Yeah... I really have no clue what your talking about.
Your sure you have a MyTouch device... right?
Mind taking a picture if you can?
You should have something that looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Give me everything above where it says Fastboot USB in red.
If you don't have this screen while holding down the back + power or volume down + power then I would think that you have a different device.

thanks for your help mine looks slightly different has a little black hole on the left but. I think it might not be the same when I bought it the guy said its htc magic but I think it may not be I don't have the same screen come up as you have shown

apprentice01 said:
thanks for your help mine looks slightly different has a little black hole on the left but. I think it might not be the same when I bought it the guy said its htc magic but I think it may not be I don't have the same screen come up as you have shown
Click to expand...
Click to collapse
Looks like you have one of those chinese fakes.

HD2 bricked?

Hi at all.
I'm a member from Germany so please excuse my bad english.
I think ,y device is bricked. Installed Android on my NAND since it was out (I think it was Feb. 1st) but now nothing works anymore. The device hung up several times since monday, so i decided to update the rom (Typhoon Cyanogenmod 7). After the update it was the same experience: the device hung up every boot at the lockscreen of android. I tried to flash clk again, flashed MAGLDR, i also flashed a WinMo 6.5 Rom but nothing works. The device gets stuck at the first boot screen.
I dont know what to do now. I love my HD2 so i pray to the lord, someone got the conclusion to my problem.
Greetings from Germany

metalgitarrist said:
Hi at all.
I'm a member from Germany so please excuse my bad english.
I think ,y device is bricked. Installed Android on my NAND since it was out (I think it was Feb. 1st) but now nothing works anymore. The device hung up several times since monday, so i decided to update the rom (Typhoon Cyanogenmod 7). After the update it was the same experience: the device hung up every boot at the lockscreen of android. I tried to flash clk again, flashed MAGLDR, i also flashed a WinMo 6.5 Rom but nothing works. The device gets stuck at the first boot screen.
I dont know what to do now. I love my HD2 so i pray to the lord, someone got the conclusion to my problem.
Greetings from Germany
Click to expand...
Click to collapse
I would start from scratch.
1) Flash task29
2) Flash MAGLDR 1.13
3) Flash Android again
it should be fine.
It also sounds like your HD2 may have a hardware issue, maybe cpu overheating.
If you still get this flash stock from SD (go to HTC and find your stock ROM), if it STILL does it send it in for warranty.

orangekid said:
I would start from scratch.
1) Flash task29
2) Flash MAGLDR 1.13
3) Flash Android again
it should be fine.
It also sounds like your HD2 may have a hardware issue, maybe cpu overheating.
If you still get this flash stock from SD (go to HTC and find your stock ROM), if it STILL does it send it in for warranty.
Click to expand...
Click to collapse
Done exactly this several times. I cant send it in, cause i bought it on ebay without warranty *cry* Thought i should update the radio rom, but the updater got stuck at 96% and send "INVALID COMMAND, the update is not for your phone" Now i get Upgrade ROM code error at HSPL screen

metalgitarrist said:
Done exactly this several times. I cant send it in, cause i bought it on ebay without warranty *cry* Thought i should update the radio rom, but the updater got stuck at 96% and send "INVALID COMMAND, the update is not for your phone" Now i get Upgrade ROM code error at HSPL screen
Click to expand...
Click to collapse
that means you need to flash official stock for your area, get it from your IMEI number on the HTC site.
Also, HTC does warranties by IMEI and when the device was originally purchased, so even though you bought it from ebay they will probably still cover it.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tried to update via the newest htc official rom...failed at 8%
It says the updater doesnt work for this phone...
EDIT: after 6 times of trying to flash the stock rom, it finally ran through to 100%.
The phone reboots and...*tada* stuck at first boot screen

Huh, you're having the exact same problem as my brother-in-law. He bought a cheap HD2 phone hoping I could fix it for him, but the same problem occurred. I tried my best on the damn thing for nearly 12 hours, but it was all for naught -- the closest I could get to installing a ROM on it was 99% before it freezes.
I haven't tried MAGLDR yet, but flashing a radio had the same problem.
As a last resort, I was going to try the technique mentioned in this topic (perhaps you can try it too): http://forum.xda-developers.com/showthread.php?t=668347&highlight=Bricked
P.S. Don't worry about your English. Your English is still better than my German.

I tried the unbrick tutorial, but it fails at the mtty-program, cause it dowsnt show up USB (using windows 7). Using the Task29 program doesnt work either. So back to start with the device stuck at the first boot screen

metalgitarrist said:
I tried the unbrick tutorial, but it fails at the mtty-program, cause it dowsnt show up USB (using windows 7). Using the Task29 program doesnt work either. So back to start with the device stuck at the first boot screen
Click to expand...
Click to collapse
It sounds to me you may have internal hardware failure. I know it sounds crazy but some members with your exact problem havechad success with this method. Put you HD2 into a plastic sealable bag and place it in the freezer for 10 to 15 minutes then immediately flash the ROM from SD card when you take out. If it works I will tell you my thoery on why it works.

Cant flash from SD card, the bootloader doesnt show any flash-options when i boot into hspl

metalgitarrist said:
Cant flash from SD card, the bootloader doesnt show any flash-options when i boot into hspl
Click to expand...
Click to collapse
Well either you don't have the LEOIMG.nbh file on the root of your SD card or you need to reformat your SD card using Fat 32, make sure to malefactors back up copycof you SD card on your computer before you reformat it though. Also if the HD2 still has a ROM on it it might just boot up aftercgivimg it a good cool down in the freezer. The reason I say this is because sometimes if the processor has become somewhat disconnected from the main board form overheating or other reasons. The cold makes the internal parts contract just enough to get it to bootip all the way. Now after of warms back up it may shut itself off and reboot back to the same screen it is stuck at now. Which in this case you will need to get te main board replaced to permanently fix the phone.

reformatted the sdcard from fat32 to fat32: doesnt work
ok, i tried the hint with the 15mins-freeze and it works!
i flashed clk, android and after 10-15mins, it back to start: the device hangs andgets stuck at the bootloader...

Try magldr... To rule out software related issues
Sent from my HD2 using XDA Windows Phone 7 App

metalgitarrist said:
reformatted the sdcard from fat32 to fat32: doesnt work
ok, i tried the hint with the 15mins-freeze and it works!
i flashed clk, android and after 10-15mins, it back to start: the device hangs andgets stuck at the bootloader...
Click to expand...
Click to collapse
Well I am glad to hear the freezer trick worked but sad to hear your problem sbowed back jp again. Like I said in my last post if it come back that means for sure you have a hardware issue. probably need another main board.
Sorry man.

So you are able to flash but it always returns to the SPL? I've seen this twice now and it was physical NAND failure in both cases.

i am able to flash but the hd2 freezes after a while and at the reboot it gets stuck at the bootloader (android logo)...with the freezer trick again, the phone boots normally (no need to reflash) but the device freezes everytime after 15-20 mins

metalgitarrist said:
i am able to flash but the hd2 freezes after a while and at the reboot it gets stuck at the bootloader (android logo)...with the freezer trick again, the phone boots normally (no need to reflash) but the device freezes everytime after 15-20 mins
Click to expand...
Click to collapse
You have either a thermal breakdown of fhe processores connection or bad physical space in the NAND chip.

[GUIDE] Restore hd2 back to wm6.5 with broken volume buttons

I would like to announce that the hd2 that have the volume buttons broken can be repaired. This guide has to be taken with caution as it may create a nuclear explotion. This will only work if using magldr, as it will boot by it self when connected to USB.
Requirements:
USB
Computer
Hd2 ruu
t-6 screw driver
- screwdriver
The first thing is to dissassemble the hd2 completely
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2nd is to get something that can hold the LCD and digitizer up.
3rd, connect the motherboard and camera flex cable together together and don't close the flex cable connection
4th, connect the LCD
Now a USB
Next the battery by put tape to hold it the motherboard so it can make contact with it.
Now, we need the computer ready to flash oem Ruu, connect hd2 to computer and with a - screwdriver connect the first 2 pins at the mother, before it boots.
Only blue and yellow
It will enter tri-color screen and now it can be flashed.
Once flashed disconnect USB and take off battery of hd2 carefully and assemble back.
And that is how u go back to windows mobile.
Sent from my PC36100 using xda app-developers app

Nice work my friend, one suggestion though you may want to put guide in the thread title. This might help get better traffic to your thread

Thanks for a tip man

Nice tip. Hope I don't have to use it.

DOVIZ said:
Thanks for a tip man
Click to expand...
Click to collapse
lijingg said:
Nice tip. Hope I don't have to use it.
Click to expand...
Click to collapse
Come on, don't use this thread as a place to get 10 posts.

Hi stevediaz,
Why do you say it will only work using magldr?? I have an HTC HD2 with the ribbon/flex cutted. I would replace the main flex but would like to be sure that everything is working before trying to replace it. I can't boot the HTC (it doesn't gets past the white splash screen with the htc logo) because the volume buttons aren't working. It got bricked when I tried to flash it with android after the "task29". I believe never installed magldr. Can I still get to the bootloader using your method and try to install windows or anything else?
Best regards,
calcaneo

calcaneo said:
Hi stevediaz,
Why do you say it will only work using magldr?? I have an HTC HD2 with the ribbon/flex cutted. I would replace the main flex but would like to be sure that everything is working before trying to replace it. I can't boot the HTC (it doesn't gets past the white splash screen with the htc logo) because the volume buttons aren't working. It got bricked when I tried to flash it with android after the "task29". I believe never installed magldr. Can I still get to the bootloader using your method and try to install windows or anything else?
Best regards,
calcaneo
Click to expand...
Click to collapse
There are several reasons for hanging at the HTC splash screen, lots of them recoverable if you can get into bootloader and manipulate menus, so its definitely worth you giving this a try.

If magldr isn't installedis not the bad, u can still. Restore aslong as it does work, but It will be harder cuz u will need the power button connected and it I harder but u will need helping u to restore it to windowsmobile. I am already working on a guide to install clk and magldr to install wp8 or android without the volume buttons.