CRT effect and firmware camera for S2 help, thanks - Galaxy S II General

Any way to get the CRT effect for S2 without rooting?
Lastly, how can I reset the counter if flash a newer firmware for the camera?

GOOOOD QUESTION !!
In one thread i read that it is necessary to delete some aplication from system directory and replace it with a different one, didnt work for me.. Also JIG cant be used.. Please HELP..

i can care less for the crt effect for now
lets stick to one topic, resetting ticker in camera firmware? how do we do this, if necessary? I have OMEF01 and really want to flash the newer one that promises to remove the lag. samsung apps doesn't show anything.

The easiest way to reset your camera count with latest 2.3.5 firmware is to basically brick ya mobile.
But not in a way were you can't get it into download mode.
What i do is flash a 2.3.3 carrier firmware over a stock one none wipe in Odin, so in a way it doesn't boot it just get stuck on startup screen.
Next go back into download mode, then flash one of the latest firmwares again, best to use a wipe version so you can redo your partition.
When flashed camera count back to zero again.
Also before doing this it best just to have a jig handy just in case, as while you flashed 2.3.3 you can also reset the firmware counter aswell.

also found this solution,
http://forum.xda-developers.com/showthread.php?t=1098834&page=124

Related

A Couple of Questions

hello guys,
here's a list of questions I have compiled which were bothering me since i bought my SGS, hope you take your time and answer these:
What is "root"-ing. How different is it from flashing a firmware on motherboard and installing an OS on to a hard drive?
Does rooting an android device kill its warranty?
Which way is the best and reliable way to root my SGS?
How do I bring back my SGS to Factory state after I root my phone?
Is there a way that I can download the AOSP off the android site and install it on my phone.
I'm with O2 (UK) and I'm required to send blank text to a number. My SGS doesnt allow me to send blank texts. How do I send blank texts? :/
How do I integrate my contacts with the ones from Facebook/Google, when I dont want all the contacts from other sources to be shown in my contacts?
regards,
emc
Quick answers:
1. Root = full control of os ( linux superuser capability) it has nothing to do with flashing firmwares
2. YES
3. search the forum or google for Galaxy s rooting (very easy 10 min max)
4. firmware reflash or
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded
5. no. that is vanilla android with no drivers. look for vanilla custom rom for SGS on forum
6. I work for a carrier in Romania so i know : IT DOESN'T MATTER IS YOU PUT TEXT IN IT (just put a letter in it and send)
7.CONTACTS->Menu-> Display options
Hope it helps. Good luck.
thanks, your answers were helpful, but raised a few more question now.
if rooting has nothing to do with flashing firmwares, why does one have to reflash fimware to return to factory state? (can you explain technically?)
I still need to figure out how to setup friends in contacts, I've already enabled contacts from facebook/google.. What I wanted to know is how do I filter people from the list so that I can see only selected of them in my contacts and not all?
-----------------------------------
edit:
just saw that my Kies asked me to upgrade to JM1. should I do it?
If I do it will *#*#7780#*#* bring my phone back to JF3 (default)? or will it bring to JM1
emclondon said:
if rooting has nothing to do with flashing firmwares, why does one have to reflash fimware to return to factory state?
Click to expand...
Click to collapse
You don't HAVE to reflash the firmware technically, rooting basically just overwrites a few files (generally, the kernel). Technically, it should be possible to simply revert the files to unroot the phone. But the only reason you would probably want to unroot anyway is to send the phone in for service, and first thing they'll do is reflash your phone with a firmware which is known to work anyway.. So you might as well.
In regards to the warranty status after rooting, it's actually a grey area as to whether it affects the warranty. If you flash with the I9000M rom, yes, Samsung probably wont be impressed. It is always better to reflash with clean firmware before returning it to service, but unless there is evidence that rooting messed up the hardware on your phone, it's probably unlikely they would reject warranty. But better to be safe.
I don't think Samsung encrypted the bootloader sequence, and had they been concerned, they would have probably disabled USB debugging within the firmware.
ok thanks ^_^
now a few more questions:
whats a clockworkmod recovery?
whats a samset?
whats an odin?
do you suggest me to upgrade my firmware?
how do i backup my current firmware?
If it ain't broke, don't fix it is my moto . Do you experience any problems with your handset ? Like lags , lockups or anything of that sort? If you don't, then I think its better if you leave it as it is. Just apply the lagFix if you want to, but I see no reason to flash your phone to a different version right now.
I have flashed many phones before (where it was much riskier than Galaxy flashing) But I still didn't flash my Galaxy S , because I simply dont see the need to change to another 2.1. I'm waiting for Samsung to release official froyo 2.2. I suggest you wait for that too.
my phone lags a lot
I share phonix view and motto. If you do experience problems post symptoms before doing something like reflash or factory reset.
Sent from my GT-I9000 using XDA App
Lag can be easely fixed with a patch. You get root and lag patch in one pack. Will try to post a link.
http://***forum.xda-developers.com/showpost.php?p=7587405&postcount=417
Delete the 3 stars in front of forum
Sent from my GT-I9000 using XDA App
emclondon said:
just saw that my Kies asked me to upgrade to JM1. should I do it?
If I do it will *#*#7780#*#* bring my phone back to JF3 (default)? or will it bring to JM1
Click to expand...
Click to collapse
updgraded my phone and did a factory reset, phone DOES NOT GOES BACK TO JF3!
just for your info
that's because u upgraded/flashed a complete new rom which replaced the old one there for factory reset will give u the latest firmware/upgrade that u have installed.

Locking up straight out of the box

Just got my new i9500, turned it on and with in minute it locked up then rebooted (no sim or mem card at this stage).
Did't think much of it at the time. Went ahead and rooted it & flashed Omega rom.
Unfortunately it continues to lock up & reboot every few minutes of use. Looks like it is faulty and will have to go back for warranty. My concern is the rom counter and warranty. Will flashing a stock firmware with odin put the counter back to zero?
Flashing stock with odin will not reset Samsung's rom counter. From my understanding, there are ways to reset the counter, but you have to be very careful because it has the potential to really mess up the phone. If you flash back to stock rom and stock recovery and relock the bootloader, you will be able to exchange it wherever you bought it without an issue (assuming you are still within the 14 day period most carriers give you). No one will look that deeply into the software of the phone until it gets back to Samsung. And even then, it is not guaranteed they will check that. I'm not saying it won't happen, but the odds of you having any issues are slim.
KTM690 said:
Just got my new i9500, turned it on and with in minute it locked up then rebooted (no sim or mem card at this stage).
Did't think much of it at the time. Went ahead and rooted it & flashed Omega rom.
Unfortunately it continues to lock up & reboot every few minutes of use. Looks like it is faulty and will have to go back for warranty. My concern is the rom counter and warranty. Will flashing a stock firmware with odin put the counter back to zero?
Click to expand...
Click to collapse
Flash a Stock Firmware using Odin below is the link u can find a firmware of ur cell
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware
after flashing a firmware again reset the device from ur cell
and i9500 has hidden counter mostly so u cant see how many flashes u have got however there isnt any way to reset also for now may be we have to wait till chainfire gets one for i9500 .. Once u flash a stock firmware it will show official hopefully they will replace it
Make sure its saying official on download mode and also in abous us / status / device status all should be official of whatever samsung writes
I have flashed a genuine firmware but it still says "Custom" when I boot into download mode.
Any ideas how to get it back to official & reset counter?

[Q] GS4 - How to return completely stock for warranty exchange

Hi,
I've been do many flash last 24 hours on my Galaxy S4(Model SGH-I337M, Telus). Initialy, i've the factory stock rom, rooted. So, yesterday, i've decided to install Cyanogen mods nightly on my phone. Not the first time i've been used it on my phone. No problem before. So, this night, after a friend show me the release canditate release seem to be more stable, i've been try to put it on my phone. So, accidentaly wipe all the data on my phone. When i'm back home, i've put again the samsung original rom from my operator(4.2.2), found here, on the website, whit odin. All completed succefully, but i've noticed that the wifi won't turn on after the flash, and no sound from the speaker. So, i've put Cyanogen nigthlies again to test if it rom relative, but same issues here, no sound, but the wifi was working. The phone was very instable, so. Then, finaly, put the original rom again, without any rooting. Stuck on samsung logo, that i've finaly got fixed by clear the data and cache. But, no sound, and no wifi. Instable too.
Precision about phone: Unlocked whit the service mode(work), and enabled AWS whit a software and file(tutorial found here)
My question is: Anything else i can do to make my phone work fine again, and does it's possible to make the phone totaly stock? When i boot up, i've noticed that the phone, whit all rom i've try, said on samsung logo: Kernel is not sendroid enfonced, warranty status: kernel, so i can't go to return my phone on warranty whit that. How i can erase that line, and make my phone seem to be no modified?
Just to specify, it's not the first time i flash a phone. Do many flash, whit galaxy s2, s3 and s4, and sure, mine. Got try Cyanogen, stock, know how Odin work and all, try many rom, and before today, never has any problem to do turn back, but now, it's seem to be impossible.
Thank you very much for your help, very appreciated!
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
jd1639 said:
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
Click to expand...
Click to collapse
I've just try this. Flash the stock rom whit odin, and factory reset on original recovery after. Same, no wifi, no any sound.
Just see yesterday, when i'm flashing, i'm flashing on the bootloader in odin(whit the tar for the stock rom). Today, correct this by flash on the pda section, still not work. Found here on the forum the stock bootloader, rom, csc, and modem, but when i do this whit odin, odin said fail.
Thank very much, i think my phone is dead, and nothing to do to exchange it on warranty.
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
saj222 said:
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
Click to expand...
Click to collapse
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
dardares said:
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Click to expand...
Click to collapse
I've seen worse software, it's no better or worse than iTunes.
Sent from my SGH-I337M using Tapatalk
dardares said:
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
Click to expand...
Click to collapse
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
mps5566 said:
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
Click to expand...
Click to collapse
This is the link i've found whit all the factory stock operator ROM. This is what rescue me.
http://forum.xda-developers.com/showthread.php?t=2269304
@Spacemonkie4207 never my itune was freeze, and i can do basic operation like transfer music or create playlist without any problem. My kies stay on connection in progress, and turn, turn, turn, but never connect. And when it connect, only one operation, and kies completely freeze, stop responding, need to close it, and open it again. Tried many cable, usb cable, reinstalling software, two other computer, but nothing to do.
I recovered back to stock from custom to 4.3 however if you do so, depending on carrier you could lose root and the ability to install custom recovery.
I would revert back to 4.2.2 (as it's knox free) go to samsungupdates (google it) and pull the 4.2.2 for your region and carrier. flash with odin 3.9
you'll lose root, but you can always perform again as long as not on 4.3 (with 4.3 u can still root if you remove all the knox stuff, u just lose warranty).
Az

Screen not working - Unroot for warranty

My Galaxy S4 just decided to show wavy lines on the screen instead of turning on - as far as I can tell the screen and digitiser are no longer working.
**I CANNOT SEE OR DO ANYTHING ON THE SCREEN**
I have a 4.2.2 i9505 UAMDE -Stock Rom- that is rooted.
I have never flashed any other firmware to it - just rooted it.
I have Kies access and backed up my phone. Kies prompted for a firmware upgrade when I plugged in the phone.
I want to return it to stock/unroot etc so Samsung will warranty the phone without fuss (it was not dropped, just stopped working).
Some questions:
Most important:
1. Is it possible to get the phone to a state that will be warranty-ready without having a screen?
2. Do I need to Triangle away if all I have done is rooted? If so, can I do this without a working screen?
3. What is the best way to return to stock? ODIN or should I just let Kies update to latest firmware? (If either will it be enough to satisfy the first question)
4. If Kies does the update will I need access to the screen to complete it?
Thanks in advance!
1. You can flash same firmware with ODin. It will delete root access, but app will stay, so you have to uninstall it through https://play.google.com/store
2. You don't need to, unless you've made a root through Oding flash?
3. Odin
4. No, but it will udpate it to 4.3 with KNOX?
mar10o said:
1. You can flash same firmware with ODin. It will delete root access, but app will stay, so you have to uninstall it through https://play.google.com/store
2. You don't need to, unless you've made a root through Oding flash?
3. Odin
4. No, but it will udpate it to 4.3 with KNOX?
Click to expand...
Click to collapse
Thanks for the quick reply.
1. not sure which 'app will stay' you mean?
2. Actually I cannot remember how I rooted - I will have to look this up again. Something tells me cf-autoroot and maybe ODIN... All I can remember it that I still have stock ROM just with root.
4. Agree that this might not be the best idea as I am trying to stay away from KNOX but I wonder if Samsung will automatically update to the latest ROM as part of the fix?
Kies is currently sitting on backing up "preparing" for ages and ages... hope it works in the end.
Looking back I suspect I used CF-autoroot which probably mean my counter has gone up.
Any way of resetting this without a screen?
I've managed to get some screen control using adb, screencast and teamviewer.
Triangle away says:
Counter: 0
Binary: Official
System: Official
I suspect the Official comes from the fact I was running Wanam Xposed and spoofing official.
One last question -
Given all that information I should just be able to flash
4.2.2 UAMDE Stock rom from sammobile with odin
and everything will be warranty-ready?
(will this wipe all my data and programs as well? - something I WANT to happen)
It will not wipe it. On the older devices like S3, there was a special ROM for cleaning purposes with PIT file, that was repartitioning your memory. Maybe there is something like that for S4?

[Q] flashing Stock UK BTU though on boot polish language shown

Ages ago because i was impatientto update my phone so i flashed the Polish Stock using Odin, since then i have used Odin to flash the UK Stock, though when i wipe and reset the phone it still initially comes up with the polish language, (not a massive issue i know but i want to get UK OTA if it ever comes) also if i go to sell the phone at the end of this year when the Note5 is out im sure the new owner would want to turn it on and see english.
Ive tried
Clearing the EFS cache and resetting the phone from recovery before and after flashing BTU
I made sure reactivation lock was off as I wondered if that would cause an issue though that hasn't helped. does anyone have any other ideas?
Im un-routed as i sometimes use my phone to test out corporate BYOD so cant root of flash a custom rom.
thanks all for any help.
ooMoo said:
Ages ago because i was impatientto update my phone so i flashed the Polish Stock using Odin, since then i have used Odin to flash the UK Stock, though when i wipe and reset the phone it still initially comes up with the polish language, (not a massive issue i know but i want to get UK OTA if it ever comes) also if i go to sell the phone at the end of this year when the Note5 is out im sure the new owner would want to turn it on and see english.
Ive tried
Clearing the EFS cache and resetting the phone from recovery before and after flashing BTU
I made sure reactivation lock was off as I wondered if that would cause an issue though that hasn't helped. does anyone have any other ideas?
Im un-routed as i sometimes use my phone to test out corporate BYOD so cant root of flash a custom rom.
thanks all for any help.
Click to expand...
Click to collapse
Download Phone INFO Samsung from Play and check the CSC.
But it might be you are rebooting into DL mode instead of shutting down the phone then starting it in DL mode. I usually remove the battery for a bit and hold the power button for a few secs to make sure the mainboard is completely discharged. Odin (& other methods) all have problems changing BL and Modem if you just do a reboot into DL.
You might want to take a look at Multiboot and Recovery for the possibility of having the ROM you want, rooted etc. AND still have a stock ROM you can choose to boot into for work purposes.

Resources