Related
Well i see this has not been posted here before... so, the best (so far) Eclair rom for Liquid
By malez, piter1225, behnaam, maxisma and vache
Wiki Page:
http://code.google.com/p/acer-liqui...cker/wiki/HowToRootAndFlashLiquidCommunityROM
Bugtracker page on Google Code
http://code.google.com/p/acer-liquid-community-rom-bugtracker/
Changelog:
To upgrade from 1.X to 1.7, you need to install the latest official Acer_LiquidE_1.100.39_EMEA_GEN1 update file first (1.100.05 bin file will work too)¶
bin file and howto are here http://code.google.com/p/acer-liqui...cker/wiki/HowToRootAndFlashLiquidCommunityROM
Future¶
Themes pack
Current¶
Always reboot at least once after installing and configuring a new rom or patch¶
If you have used apps2sd, always do a WIPE SD in sdcard menu within the recovery before installing LCR¶
Please use bug tracker to indicate closed bugs, append to existing ones or open new issues. Thank you all
From 1.7.2 to 1.7.3 (this version is a patch, no data loss EXCEPT your launchers configuration (can be easily backed up) and updated apps)
Added Froyo Gallery3D (for real
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
)
fixed SD card issue
fixed dxdrm logging
modified setUIval.sh / getUIval.sh to be able to choose the requested setting table OK
ramzswap enabled
fixed filterAds.sh
modified audiocall.sh to add another audio filter (quiet to loud) OK
added a gscript to clean logs (logs are stored in /cache use about 100k/each boot) OK
updated apps
wake on camera (Credits to xaueious)
modified cleanRom : 30sec timer to let user poweroff the phone in case a wrong run + removed VoiceSearch? + sendlog
addded sms.sh to backup/restore sms /system/sbin/sms.sh gscript OK
update uiconf tool with screenshots
no more freq limit
Google Maps moved to /data/app
Speed Up Android 2.1 Browser, Default javascript engine in Froyo. Enabled
animated GIF support (Credits to Auxx / g4rb4g3 / xaueious )
From 1.7.1 to 1.7.2 (this version is a full version). We advice you to install latest Acer Update to eclair first.
Fixed sound on call
New application to configure UI (developped by reppad [email protected])
Additionnal fonts were removed, so asian languages are back
Gallery app from froyo
Purge DxDrm logs on reboot
Purge aPanic on reboot
Wifi tethering (many thanks to gengaro86)
Fixed some UI issues
All apn were updated
Bluetouth file transfer
Added cleanROM.sh in gscript : will remove all 3rd apps included in the rom
Added filterAds.sh/unfilterAds.sh in gscript to remove adds
Added audiocallLoud.sh / audiocallStandard.sh / audiocallQuietToLoud.sh to change audiocall sound
Other fixes
From 1.7 to 1.7.1 (for the moment only a patch is provided, not a full rom, so install it on trop of the 1.7. You won't lose any application or data.
Fixed battery usage (use full android UI, stream UI uses a lot a battery)
Audio hack for in call sound (a bit louder)
Fix sound reverb on app like Sipdroid
Fix slow gallery
Fix camera (note that zoom in camera is available when taking picture under 2M resolution)
Ability to use standard eclair AOSP dialer in LCR_UI.txt
will remove Notes application (Titanium backup it before applying if you want to keep it)
Updated Google Maps 4.3
Updated sendlog
Updated Launcher Pro 0.6.3
Updated ADW 0.8.9 => If you slide up, status bar will hide/show. If you slide down, notification bar will display
Updated Titanium Backup 3.2.7
Updated android term
To gain in space usage, it is recommanded you uninstall all updates for these application before applying (they can be removed after but you won't have the preconf for launchers in this case).
ALWAYS DO A NANDROID BACKUP FIRST
Always reboot at leat once after first boot to be sure everything is well applied.
From 1.6 to 1.7
based on Acer_LiquidE_1.100.05_EMEA bin file. Flash THIS bin file before installing Update recovery to at least 0.5.3 too
Based on stream dump
New fully cusomizable User Interface : Notification type, notification position, dialer, lock screen (See the file LCR_UI.txt on sdcard for more infos. To apply changes, just reboot. You will need to remove/re-add widgets after applying a change. Use Stream lock stream will break widget refresh on reboot))
really faster than original bin and than 1.6
Incredible sound with Dolby Mobile
Read Divx / Xvid
New Camera app with a lot of settings
Voice Recognition
sensivity patch included but not applied (use gscript to load increaseSensitivity.sh and it will be applied permanently / to remove run restoreSensitivity.sh)
better open GL
black themed
optimized network for better performances (can be disabled)
fixed Bouygues Telecom MMS issues (issue 78) no more need to use Hancent to send mms.
fixed Add APN to list (issue 96)
fixed custom ring-tones for contacts are not working (issue 99)
fixed Sms notification sender is wrong (issue 100)
fixed Wifi doesn't work after wake up (issue 101)
fixed issue Phone stay in standby if switching from 3g to 2g (issue 102)
Launcher choice at startup (to unselect default one : Settings / Application / Filter ALL / Select defaut launcher and choose 'remove default action' )
fixed Widget load on reboot
many optimizations (Framework, Contacts, Live wallpapers, Mms)
New bootsplash / bootanimation (thanks to paulf66)
New supported fonts : Greek, Cyrillic, Georgian, Armenian, Hebrew, N'ko, Tifinagh, Lao, Canadian Aboriginal Syllabics, Ogham, Arabic
updated HTC keyboard
update Launcher Pro and AWT Launcheradb shell
updated Maps 4.2
updated Barcode scanner
updated titanium backup 3.2.4
updated Deskclock Launcher
updated ES File explorer
updated ES Task manager
Updated quickboot
and more....
of course apps2sd is still here
know bug: if you use acer stream lock screen, your widgets won't refresh well. You will have to remove and re-add them after reboot.
know bug: battery indicator will always indicate a little less battery than you really have. Use battery time lite widget for exemple to know the exact amount of battery available.
system will automatically reboot after first boot ( about 30s after sim panel ) : this is normal
From 1.5 to 1.6
* based on Acer_LiquidE_1.100.05_EMEA bin file. Flash THIS bin file before installing is recommanded but you can also flash the rom on top of 0.14 or 0.16 bin. Update recovery to at least 0.5.3 too
* really faster than original bin
* some battery optimizations
* black themed (white theme patch will be provided)
* optimized network for better performances (can be disabled)
* fixed Bouygues Telecom MMS issues (issue 78) use Hancent to send mms.
* Launcher choice at startup (to unselect default one : Settings / Application / Filter ALL / Select defaut launcher and choose 'remove default action' )
* many optimizations (Framework, Contacts, Live wallpapers, Mms)
* added a Notes app
* removed xt9
* removed Voice search and accessibility tools
* updated Maps
* updated Barcode scanner
* updated titanium backup
* updated Deskclock Launcher
* and more....
Many thanks to Piter who has joint LCR and made a really good job on this rom. If you want better battery performance, disable haptic feedback (use spare part) and vibration in HTC mod keyboard (keyboard settings / Text input / Vibrate on input)
From 1.4.1 to 1.5
* based on Acer_LiquidE_0.014f.01_EMEA_GEN1 bin file. Flash THIS bin file before installing or you will have no network and no adb access. Update recovery to at least 0.5.3 too
* really faster than original bin
* AppsOrganizer, Cardock, Carmode, Tetherbot removed. Will be provided as addon pack
* Themes will be provided as patch too
* Acer apps removed
* DeskClock Launcher (big thanks to Cedric Gatay)
* Maps 4.1.1
* Titanium backup 3.0.16
* es File explorer 1.3.12
* es Task manager 1.0.8.0
* barcode scanner 3.22
* Meridian player pioneer 0.16.0
* fixed 3D games are slow or not working at all on 1.3. ( issue 66 )
* fixed Compass doesn't work probably causing backwards navigation in all navigation programs ( issue 68 )
* fixed Compass doesn't work probably causing backwards navigation in all navigation programs ( issue 73 )
* fixed Keybord vibration not workingHTC_IME ( issue 75 )
* fixed Contacts pictures ( issue 77 )
* partially fixed Bouygues Telecom MMS issues (issue 78) change default,mms to wap in settings to fix
* fixed Message led is on if a notification icon in a taskbar ( issue 79 )
* even better sound
From 1.4.1 to 1.4
To upgrade from LCR 1.4, just flash the zip file. If you have not LCR 1.4 installed do a FACTORY RESET before flashing
* fixed vodafone it apn ( issue 73 )
* fixed Sometimes connection don't work after disabling/enabling data connection (issue 83)
* fixed Clock alarm bug with daily alarm when it was first reapeted ( issue 85 )
From 1.3 to 1.4
Video : http://www.youtube.com/watch?v=RHuL8-159q8 (thanks to fastreward)
* Fully rebased on new bin (Acer_LiquidE_0.010.00_EMEA_GEN1)
* BusyBox v1.16.0
* Superuser 2.0.1 (Chain DD)
* HTC IME with voice and mods (Jonasl)
* New black theme (AdamZ - Baisangour)
* New boot and wallpaper (Paul 66)
* New boot animation (liquid_it)
* Helix 2 Launcher
* Nemo player
* Flac player
* New calculator
* NavLauncher => 2.2.4
* Titanium backup => 3.0.4
* MoreLocale => 2.2.0
* AppsOrganizer => 1.4.10
* Barcode Scanner => 3.22
* GoogleMaps => 4.1.1
* Removed facebook
* Removed battery graph (addon)
* Removed AutoKiller
* Fixed Nexus Live wallpaper (bais)
* Better Audio No distorsion at all (Metlus)
* Added Flac support (AndLess)
* Added Meridian Player Pioneer 0.15.3
* Added Gscript lite : (change defaut launcher)
Big Big thanks to Paul66, Fastreward, Neo, Natsumi, Liquid_it and all members that have supported this version. Thank you all. It's for you. Malez
1.3 addon pack (LCR 1.3 required) = Addon pack v3 fixed
* script to fix su request issues
* clock weather widget (HTC style)
* animated wallpaper (Earth / HTC Sense)
* online wallpaper app
* Original laucher with app/photo widgets from acer (use adb shell launcher stock/helixir/status to switch)
* NemoPlayer
See wiki page for pictures and documentation
From 1.2.4 to 1.3 wipe made on install
* Rebuilt on new liquid Acer_LiquidE_0.008.06_EMEA_GEN1 bin (compatible with baseband A1-03.10.03 only)
* Multitouch
* Added more locale 2 for internationalization (settings in app list)
* Added international keybord
* Added titanium backup 2.9.7.4
* Added tetherbot
* Added navlaucher
* Added more ringtones
* Added sqlite
* Bootsplash graphics by Cyril Bardelang
* Of course fully working apps2sd
From 1.2.3 to 1.2.4 factory reset recommended
* compatible with ACER_LiquidE_0.004.01_EMEA_GEN1 bin only (baseband A1-03.05.02)
* Do a factory reset to be sure to benefit of all fixes in this version
* auto fix boot if data/dalvik are symlink and no sd card
* fixed MMS send
* fixed memPrint
* added cardock + carmode
* added file explorer + task manager
* added sendLog
* added tetherbot.apk
* added AppsOrganizer_1.4.8.apk
* added barecodeScanner.apk
* added battery graph
* removed auto flash malez recovery
* added wysie contact
* fixed sipdroid (if not uninstall/resinstall sipdroid)
From 1.2.2 to 1.2.3
BIG THANKS TO MALEZ FOR HIS HUGE CONTRIBUTIONS!
* Voice Search is fixed!
* Apps2SD will now check if there's enough space free on your SD
* Apps2SD won't break if you don't have an app installed anymore
* Apps2SD now can move dalvik-cache and data (data not recommended!) also (See Wiki for instructions)
* ROM keeps the autostart log now
* Added logboot to display all autostart logs
* Added logbootclear to erase all autostart logs
* Added memPrint command to display memory usage and settings
* Fixed ins_run and ins_runOnce for args
* Changed oom settings for less cpu and battery
* Corrected log-debug for better structure of logs
* No more need to reinstall update.zip after factory reset/data wipe
* Automatic memory settings adjusted
* Autokiller updated to 2.2 (personnal preset)
* MapView fix which affected for example Places Directory (credit to shafty)
From 1.2.1.1 to 1.2.2
* Fixed rights on autorun scripts
* All apks are zipaligned on boot for even better performance
From 1.2.1 to 1.2.1.1
* Boot logs are now stored in /data/logs/
* Little boot speed up
From 1.2 to 1.2.1
* Fixed terminal emulator FC
* Added Quickboot
From 1.1.1 to 1.2
BIG CHANGES! Apps2SD wiki will be updated tomorrow by Malez on how-to switch apps2sd on
* A lot of speed improvements
* HelixLauncher with modifications! Thanks to Faruq!
* Some apps moved to /data partition for easly uninstallation
o SpareParts
o AutoKiller - By ratson at htcpedia, thanks!
o Maps Brut.ALL's hacked maps for Non-us navigation, thanks!
o SetCPU
* Apps2SD fully working with ON/OF/STATUS feature and auto fix (if sd fails on boot). - Big thanks to Malez for his work on this!
* Terminal Emulator added for doing commands when you dont have access to a computer
* Recovery flashed on first boot - Malez Recovery 0.2.1!
* Zipalign of data on boot, lowers apps footprint which gives faster loading of them!
* Some other things missed out!
From 1.1 to 1.1.1
Only slight changes..
- Exchange Calendar Sync
- Added Talkback, Kickback and Soundback
- Fixed T-Mobile US APN (Thanks to eVil)
- Fixed build number
- Nexus themed Launcher.apk
From 1.0 to 1.1
- Zipalign on-install, Thanks to Wes Gerner for that script
- SpareParts (added)
- Launcher2 replaced with Standard Android Launcher for more speed (Live Wallpapers are still working !!), update.zip provided for those who want it back look in downloads section - Thanks to [email protected] for launcher
- Apps2SD with on/off feature (disabled by default) (You need an ext2 partition of course), read Wiki for guide howto activate - Thanks to LoxdevK, Cyanogen and more for that script
From ACR to 1.0
-Kept Acer's Contacts.apk as it provides an HTC like speed dialer and some other functions
-Nexus One bootlogo (Thanks to g4rb4g3) & bootanimation
-Removed the automatic wipe, if you have problems, please wipe first and retry!
-Zipalign on boot
-Increased VM Heapsize for speed
-Zipaligned and Optipng'ed all the apk's aka optimized them for speed
Hi ! Thank you for this share but :
- Do you have screenshots for this ROM ?
- The bugtracker page doesn't work...
Thanks
anghell3122 said:
- The bugtracker page doesn't work...
Click to expand...
Click to collapse
http://code.google.com/p/acer-liquid-community-rom-bugtracker/
thanks, just updated the link
sure screenshots:
someone have tried this one? work fine?
been using it for a couple weeks... its nowhere near as fast as donut... but hey, its a first approach to eclair on the liquid... i use it just for fun, my work phone is a nokia e72... so i can play with this
upgraded
well, just updated from acr 1.8 which became sluggish...
I was prepared to reinstall all my apps and was a beautyful surprise finding everithing back in place I just put the zip in sd, booted into recovery and "apply any zip from sd card". fast and efficient! I have just 2 annoiances:
1- I'd like to put the phone on vibrate in the lockscreen, not only mute (but I think is a problem of the system, not of the rom itself
2-when I open a contact I see on the right side either the phone number to call and the possibility to send a msg; but no matter what I choose only the phone call starts. Is this a rom bug (also on acr 1,8) or part of the original system?
Rest seems very good, fast and efficient
1.2.2 version is out and is quite a good ROM. All apps are running much faster.
http://code.google.com/p/acer-liquid-community-rom-bugtracker/
just updated the info!!
quoting malez...
LCR 1.5 available
From 1.4.1 to 1.5
- based on Acer_LiquidE_0.014f.01_EMEA_GEN1 bin file. Flash THIS bin file before installing or you will have no network and no adb access
- really faster than original bin
- AppsOrganizer?, Cardock, Carmode, Tetherbot removed. Will be provided as addon pack
- Themes will be provided as patch too
- Acer apps removed
- Maps 4.1.1
- Titanium backup 3.0.16
- es File explorer 1.3.12
- es Task manager 1.0.8.0
- barcode scanner 3.22
- Meridian player pioneer 0.16.0
- fixed 3D games are slow or not working at all on 1.3. (issue 66)
- fixed Compass doesn't work probably causing backwards navigation in all navigation programs (issue 68)
- fixed Compass doesn't work probably causing backwards navigation in all navigation programs (issue 73)
- fixed Keybord vibration not workingHTC_IME (issue 75)
- fixed Contacts pictures (issue 77)
- partially fixed Bouygues Telecom MMS issues (issue 78) change default,mms to wap in settings to fix
- fixed Message led is on if a notification icon in a taskbar (issue 79)
WARNING :
- install malez recovery >= 0.5.3 first
- If you have used apps2sd, WIPE SD (in wipe the recovery wipe menu) before flashing or you will have problems
updated to 1.6!
help with pinch to zoom
thank to all commuinty for this wondergul rom
I installed it succesully but while I have pinch to zoom in google maps don't have it in chrome
how to enable pinch to zoom in chrome?
teux said:
thank to all commuinty for this wondergul rom
I installed it succesully but while I have pinch to zoom in google maps don't have it in chrome
how to enable pinch to zoom in chrome?
Click to expand...
Click to collapse
you just get dolphin browser HD
Multitouch should work in stock browser on this bin. It does for me.
Thanks to all, I am using this ROM now, the best ROM I tried, but I got the problem with Contacts;
- there is no Contact Phone, only Google and SIM Contacts available to add..
- I have a lot of contacts in my SIM, but when I want to import SIM Contacts, it reported that no contacts in my SIM..
Pls help, thank you..
thuwailib said:
Thanks to all, I am using this ROM now, the best ROM I tried, but I got the problem with Contacts;
- there is no Contact Phone, only Google and SIM Contacts available to add..
- I have a lot of contacts in my SIM, but when I want to import SIM Contacts, it reported that no contacts in my SIM..
Pls help, thank you..
Click to expand...
Click to collapse
just updated thread to 1.7 ... try that one first
this rom is very fast and stable.you've got a lot of options inside.it is faster than the lcr 1.6.now you can find dolby sound in it.,this is incredible. thank you very much.
jpmve said:
this rom is very fast and stable.you've got a lot of options inside.it is faster than the lcr 1.6.now you can find dolby sound in it.,this is incredible. thank you very much.
Click to expand...
Click to collapse
also, there's divx support!
[[ Cold ]] said:
just updated thread to 1.7 ... try that one first
Click to expand...
Click to collapse
Thanks Cold, I've just updated to 1.7, it's load SIM Contacts on first reboot, but didn't load again on second and next reboot..
Also, I couldn't import SIM Contacts from Contacts application.. and the Phone Contacts (I mean phone memory contacts) still not found..
I like this ROM, except this problem..
Thanks all developers for this wonderful ROM..
Installed LCR1.7 and I wouldn't say it's stable.
Lot of applications are crashing...
Will go back to 1.6 and wait for updates of 1.7 to come.
This is the latest Hay ROM
Update
* FPS unlock -55
* optimize script
* kernel geno perfect not broken sound
* streamline retained Google services
* built-in screenshot function normal ( to save the image directory to the / sdcard / MIUI / screen_cap directory)
* optimize script on WIFI range, power adjustment
* optimization scripts on GPS regulation
* optimize script on optimal energy slightly to save electricity
* optimize script to improve operation speed
* optimization scripts on 3D processing run808
* RE Update Manager ( white, enable compatibility after normal )
* updated with theme
* built-in security intelligence ( ROM statistical software market competition, run time, official statistics! )
* UC browser ( ROM competition partners )
Install ROM:
1 will be downloaded from the zip package do not extract, directly into SDcard
2 has been holding down the volume up + power power button, do not loosen, until entering the recovery modeIn
3 recovery, the volume down key / menu, the home key to move up and down, power key / search keys for the confirmation, the return key to return to the previous menu.
4 select" clear all data" to recover the factory
5 select" option package from the SD card"
6 from the SD card can choose a ZIP file"
7 to find just download the zip package confirmation
8 after the confirmation, brush machine, wait 1minutes, complete.
9 after brushing, returns the first menu, select " to immediately restart restart mobile phone system."
10 and then wait for a while, first boot will be slower.
Brush the ROM package use geno's Chinese recovery
Address
115.com/file/dpq975v4#
anzhi-2012-04-042.zip
With the ROM Sakura
MIUI.us Fro U8800pro, not streamlined official any software program, complete the stable version, this is you need the millet system!MIUI system is MIUI, I don't think superfluous, want to touch, everybody knows, the original MIUI more stable, more energy saving optimization.This version ( measured by group of about 60 people ) test, no FC, than the previous MIUI saving some, please support me, thank you!
[ ROM ] the content introduction
* Root MIUI permissions - Original
* FPS unlock -55
* Zipalign optimize script
* kernel - G - perfect not broken sound
* keep all official software, including the latest Google services
115.com/file/e7qrlssk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Visit Project's page @ google code
MiniCM7 is custom-built, based on CyanogenMod 7, running Android Gingerbread.
Notes
The MiniCM7 and OrangeHaze themes are is made exclusively for the MiniCM7 ROMs. They are not to be used with other ROMs, so DON'T rip them
To cookers: If you want to use parts or all of this ROM for your custom cooks, read this first.
To everyone: Please don't mirror this ROM
MiniCM7 is built for Cooper. It is a stable and the most feature-complete Gingerbread ROM perfect for day to day use.
This is a team work by DaRk_dOg and nobodyAtall
For Troubleshooting common issues visit: http://code.google.com/p/minicm/wiki/Troubleshooting
FAQs - Note this was written for the X10 mini Pro.
If you have a question, please READ THIS before posting and also use the SEARCH button at the top right ->
If you want a more relaxed chat, or have issues with MiniCM, you can use the following chat server (Thanks to SafiXS for setting this up!)
MiniCM chat
Before posting an issue wipe (factory reset) via CWM at least twice
Working:.
Everything
Features:
Built for MDPI (Optimized Source)
MiniCM Update notifications via c2dm (CM Settings -> System -> Update notifications)
App2sd / Dalvik2sd compatible with 2.1 app2sd (storing to ext2/3/4 pre-existing partition is detected and mounted as such)
Gingerbread's native App2sd (storing to fat)
Modular Overclocking handled CM Settings menu (by default none is active)
Extra CM Performance Settings menu for SD Read Cache Speed
Extra CM Settings display menu for Ultra brightness
Smooth 2D scrolling in menus
Native Wifi Hotspot
Native USB tethering
Flashlight toggle from lockscreen
Most of the core components are built from sources
Please report bugs on this thread, but only after you read the OP. TWICE.
Thanks to
nobodyAtall and DaRk_dOg For the Rom Source.
SpaceCaker For being my friend, and helping me with bugs and support.
OldDroid For helping me when I got into Compiling from source.
Source can be found here:
Code:
https://github.com/MiniCM
Screenshots
Default theme
Orange theme
Rom's Changelog
Check the girrit
### MiniCM7-2.2.1
* CM7.2 RC4
### MiniCM7-2.2.0
* CM7.2 RC1
* Small bugfixes
* Improved scrolling performance
* Updated adreno libs
* Media profiles update
* New bootanimation
### MiniCM7-2.1.9
* Improved proximity and light sensors (should solve screen staying black and skype issues)
* a2sd scripts by texasice (http://forum.xda-developers.com/show...postcount=1374)
* a2sd via CM Settings -> Performance menu
* Blade lockscreen style
* Option to remove all stored Wifi networks by long pressing
* Seperate notifications for MiniCM ROM / nAa kernel
* Fixed Radio FM app RDS allignment
* adb over network
* kernel: 2.6.29.6-nAa-11
### MiniCM7-2.1.8
* Improved 2d/3d performance due to new kgsl drivers
* Configurable centre clock in status bar (Thanks to Felimenta97 for showing me the implementation by JerryScript)
* ICS Transition animations
* ICS Rotation animations
* Various CM bugfixes (last sync was yesterday)
* kernel: 2.6.29.6-nAa-10
### MiniCM7-2.1.7
* Suport for X10mini pro (mimmi)
* (CM) T9 dialer for quickly finding contacts
* If no boot animation is selected, the MiniCM7 logo is shown
* kernel: 2.6.29.6-nAa-08
### MiniCM7-2.1.6
* Offline charging
* Show kernel bootlogo if bootanimation is disabled
* Removed modular overclocking since nAa-07 already has overclocked frequencies to choose from
* Option to toggle flashlight from lockscreen (CM Settings -> Lockscreen -> Widgets)
* Fixed OpenGL ES 2.0 version reporting
* MiniCM7 and OrangeHaze theme updates
### MiniCM7-2.1.5
* Based on CM-7.2.0 (RC0)
* Suport for X8 (shakira)
* Focus with camera button while video recording (robyn)
* Disable network lock dialog after pin input (configurable)
### MiniCM7-2.1.4
* Sensors are now built from source (no compat mode). No sensor delays
* Many CM fixes related to stability, bugs and new features
* Disabled automatic light sensor screen dimming
* Automatic brightness now works (select tickbox from display settings and also allow light decrease from CM Display Settings)
* Liblights fixes
### MiniCM7-2.1.3
* Based on CM-7.1 release (Android 2.3.7)
* kernel: 2.6.29.6-nAa-05
* USB tethering
* New usb drivers
* Some extra RAM
* Switched to fake dual touch from andrej456 (seems to be the best choice for the mini)
* Ant+ support
### MiniCM7-2.1.2
* kernel: 2.6.29.6-nAa-04
* Compcache support (configurable via CM Settings menu)
* Audio recording quality improvement
* Ring lockscreen
* Cherry-picks: Greek dictionary, MIUI-like Battery Bar, Preference to disable bootanimation for faster boot
* Updated Polish translations
* Fixed carrier detection and selection
### MiniCM7-2.1.1
* Reverted Custom carrier label since it broke lockscreen unlocking
### MiniCM7-2.1.0
* kernel: 2.6.29-nAa-02
* Updated wifi/AP modules
* Fixed 'notification bar difficult to pull up' issue
* Fake DT updated to doixahn's 007 (in kernel)
* Major device re-organizing and clean up. Allign with CM/robyn
* Custom carrier label in CM Settings -> Interface -> Status bar tweaks
* Clamp the duration of rotary animations
* Reposition rotary lockscreen for 'drag down to unlock' to work easier
* Camera support for googles and other apps (X8)
* Loop ringtone option via: Settings-> CM Settings -> Sound
* Fixed CWM recovery detection in About -> Phone
### MiniCM7-2.0.7
* CM Setting (input settings) for back button to end current call
* Added Smartass governor (thanks to AnDyX), not enabled by default
* Wpa_supplicant / Wifi from sources
* Rotary doesn't cover caller's name any more
* LED flash via notification bar
* Offline charging for X8
### MiniCM7-2.0.6
* netcfg, libbluedroid from sources
* Improved bluetooth / FM Radio functionality
* liblights from sources (notifications should blink now)
* Replaced Launcher2 with ADWLauncher
* Fixed /data getting filled up with failed download files
* MDPI and several other fixes for X8
### MiniCM7-2.0.5
* Fixed ddms screen capture
* Full camera capabilities (photos / video / AF / Flash) using eclair libcamera (thanks to doixanh)
* Fixed chargemon script for multiboot
* Smoother 2D scrolling
### MiniCM7-2.0.4
* Android version 2.3.5 (GRJ90)
* Removed Launcher pro (you can download latest rev. from market)
* Optimize apks and strip down size
* Updated LiveWallpapers
* Updated CWM recovery to 3.2.0.0-r5 x10mini (multiboot + encryption)
### MiniCM7-2.0.3
* Cyanogenmod 7.1.0-RC1
* Theme updates for various parts
* Radio app improvements
* Fixed Usb debugging notification icon
* backuptool on installation that backs up and restores google propriatery system files
(no need to reflash gapps if it was already installed)
### MiniCM7-2.0.2
* ClockworkMod recovery v.3.2.0.0-r3 for x10mini
* Baseband verification on installation
* Build number: GRJ22 (almost CM7.1) - several changes from Cyanogen
* Many theme updates for MiniCM7 theme, new OrangeHaze theme
* SDcard Cache size changed to 128K to avoid music players hiccups
### MiniCM7-2.0.1
* MiniCM Update notifications via c2dm (CM Settings -> System -> Update notifications)
* Camcoder high quality mode (VGA: 640x480)
* Many Theme updates in numerous system places and applications
* Cyanogenmod now has an option in CM Settings -> Lock screen -> Style options -> Incoming call style
* Undervolting and Overclocking handled CM Settings menu (by default none is active)
* Notification led
* Fixed audio routing in FM Radio app
* APN settings listing
* gralloc reverted to stock (better performance)
* Sensors fixed, working in compat mode
* Compass fixed
* Fixed Magic smoke wallpaper
* Permission Management for apps by Cyanogenmod
* Launcher Pro 0.8.6
### MiniCM7-2.0.0
* Cyanogen7.0.3 - Android 2.3.4 code baseline
* Built for LDPI
* MiniCM7 theme
* GSM/SMS/Data(3G, EDGE)
* Wifi
* FM Radio
* Fixed reboots bug
* Stock audio Recording
* Flash led (Torch app)
* ADB at boot
* Sensors (except proximity and light)
* OpenGL/3D
* Audio Jack
* Video decoder
* Video playback support for 3rd party apps
* Vibration
* GPS
* Bluetooth
* App2sd (storing to ext*. Detect ext3/4 partitions and mount as such)
* Native App2sd
* xRecovery preinstalled
* Usb mass storage
* Audio Mixer
* Camera (VGA)
* Stock SE keyboard
* Offline charging
* Reboot menu - boot into xRecovery
* tun module (vpnc)
* Fake DT support (Thanks to: doixanh, andrej456)
* Overclocking (Thanks to: doixanh)
* Mddi lag fix (Thanks to: doixanh)
* CM Settings performance menu for setting the Sdcard read cache size (speed improvements for sdcard)
* CM Settings performance menu for CPU Overclocking
* CM Settings display menu for Ultra brightness
Backlights
If backlights don't work for you, go to CM Settings and set the levels correctly:
Code:
light sensor value -> k/b brightness value
0-3 -> 255
4-15 -> 255
16-63 -> 255
64-249 -> 255
250-(infinite) -> 0
Downloads
Rom
MiniCM7-2.2.1-cooper
Camera Fix - Please Flash, camera source was left out.
Camera_cooper_miniCm
Gapps
Gapps 20120908
[ROM] MiniCM7-2.2.1 [Blackhawk 2.6.35.7]
First!!!
I tried the Cyantux and now I must change ROM to try this
xD xD
Impulse1020 said:
First!!!
I tried the Cyantux and now I must change ROM to try this
xD xD
Click to expand...
Click to collapse
How was CyanTUX?
I like CyanTUX more, has a nice Ui and it's fast. This ROM tough, PURE SPEED. While it stays stable.
No service, no IMEI, nothing is working.
Screenshots coming
zizibuba said:
No service, no IMEI, nothing is working.
Click to expand...
Click to collapse
Screenshots please? Mine is working fine.
JESUS it won't even charge.
zizibuba said:
JESUS it won't even charge.
Click to expand...
Click to collapse
Dude, chill. And don't laster it's rude.
I just compiled the ROM, I will look into the bugs, maybe I did something that fixed them or maybe you did something wrong. I'll check.
PulseDroid said:
Dude, chill. And don't laster it's rude.
I just compiled the ROM, I will look into the bugs, maybe I did something that fixed them or maybe you did something wrong. I'll check.
Click to expand...
Click to collapse
Sorry...
Something went wrong with Repo Sync, missing some files. - Mod feel free to Close thread, I will have a new build on latest tomorrow.
Fixed. Uploading now.
PulseDroid said:
Fixed. Uploading now.
Click to expand...
Click to collapse
Trying tommorow. Just tell me, is undervolting really working?
zizibuba said:
Trying tommorow. Just tell me, is undervolting really working?
Click to expand...
Click to collapse
Sortoff, after like 2 minutes the Ace restarts. - Why undevolt, the Ace is running low already.
Working build is up, sorry for the inconvenience.
Looks great, downloading
Where's the Camera app? Also, when I select the camera button on the top right of Gallery, it gives me a FC.
Camera fix added :3
PulseDroid said:
Camera fix added :3
Click to expand...
Click to collapse
A clean speedy CM rom. So many mods and possibilities. But seeing as it's such an early build, it gives me the chills of bugs and issues.
Do you think it's good to go?
SuperAce609 said:
A clean speedy CM rom. So many mods and possibilities. But seeing as it's such an early build, it gives me the chills of bugs and issues.
Do you think it's good to go?
Click to expand...
Click to collapse
Why don't you just try it out?
It's not really going to update soon as the source doesn't change much in the CM7 version. - But try it, report bugs and I'll fix them for you.
Gurpreet Singh has made this ROM and the credit goes to him.
=========================
|| --- HIGHLIGHTS OF ROM --- ||
=========================
.
- Brilliant UI and and Very clear display
- Brilliant Sound (loud and clear)
- Brilliant 13 MP camera
- Optimized RAM
- Optimized Battery
- Integrated Statusbar Themer
- BOS Control ( Contains Many Apps )
- Flip To Mute , Intelligent Answer
- Automatic Call Recorder
- Init.d support added
- Inbuilt Nightmode
- Inbuilt Android L Themed Keyboard
- Viper integrated for additional sound options
- Brilliant Music Player
- Inbuilt Backup & Restore Option
- Many Awesome Apps Included
- And lots lots more…..
===========
|| --- FAQ --- ||
===========
.
# First I will Recommend you to read "BOS User Guide" in BOS Control. #
————————-
Q- How to use Greenify ?
A- Go to Settings>Greenify>Then Select Greenify>Then Select " + " icon>Select the apps you want to hibernate.
————————–
Q – How to enable Android L theme in Keyboard ?
A- Go to Settings>Language & input>Google Keyboard Settings>Advanced settings>Color scheme>Material.
————————–
Q – Images & Songs are not showing ?
A- Go to Settings>Apps>All>Media storage>Wipe cache , Wipe Data , Force stop>Reboot>Then after Rebooting wait for 5 mins. The Images and songs will load.
————————–
Q -- Playstore not working even though Data connection/WiFi is on ?
A - Make sure you have not started the Freedom app , if yes then stop it.
.
======================================
Bugs:-
1. Proximity sensor is not working.
You may use Proximity Screen Off from app store:
https://play.google.com/store/apps/details?id=com.itsme4ucz.screenoff&hl=en
2. Memory card is shown as phone storage.
3. Please let me know if you find any bugs
DOWNLOAD LINK:
https://drive.google.com/file/d/0BxkdOt_SBVo4NUN4NEl5RTJGdnM/view?usp=sharing
nice rom ....:good:
THANK YOU
:good::good::good::good: Seems to be a nice rom, keep up the good work, I'll try this soon :good:
Although the Xiaomi Mi 2 is almost five years old, and it seems there would never be a working nougat/oreo ROM after ivan stopped the development of his AOSP project, but it's not the truth. As the issue of light and proximity sensor have been fixed, I think most of the system components are stable enough for dialy usage after my couple days tests, so I decide to release the AOSP 8.0.0 to you today.
Install:
Please make sure your phone haven't modified the stock partition. It means my rom only work with the latest miui-dev partition table, so you have to Download lastest Mi 2 Developer tar file and flash using fastboot before install my oreo/nougat ROM . This process will earse all data on you phone, so backup all data before you getting start.
1. flash stock miui developer by fastboot update (http://en.miui.com/a-234.html)
2. flash twrp recovery use fastboot and reboot
3. hold power and volume up key to boot into recovery mode
4. install oreo or nougat ota package
5. wipe data and cache (you have to do this even if you are using ivan's aosp marshmallow/lollipop)
Working:
(Note: I use Mi 2SC with CDMA network support, but I don't have an available CDMA SIM card right now for test, so users with CDMA network might have trouble with RIL)
- Audio (bluetooth headset not test)
- Bluetooth
- Camera
- RIL
- WIFI
- FM
- Sensors
- GPS
Credit/Thanks
Special thanks to ivan for the initial device source tree and his preview works on Mi2 device.
Many Thanks to @AdrianDC @Ziyan for their great work to bring Android Oreo to MSM8960 platform.
Also thanks to @m11kkaa (M1cha) @zaclimon for their projects.
- Xiaomi Opensource Project
- Google Android Opensource Project
- Team LineageOS/CyanogenMod
- Team Omnirom and Team TWRP recovery
- Team Unlegacy Android
Source:
device tree: https://github.com/windbellx/android_device_xiaomi_aries
https://github.com/windbellx/android_device_xiaomi_msm8960-common
kernel source: https://github.com/windbellx/android_kernel_xiaomi_msm8960
vendor: https://github.com/windbellx/proprietary_vendor_xiaomi
Screenshot:
Download
https://mega.nz/#F!naRFGQDR!d9Uv-Maw56vyYsphAj00Kw
Known issues
1. APN needs setting manually to use CDMA data network. (?, not sure, need more tests).
2. Selinux status is on permissive status.
Root
1. download all files under superuser
2. reboot to fastboot, flash boot.img
Code:
fastboot flash boot boot.img
3. boot into recovery, mount /system, push su binary and superuser.rc to your phone
Code:
adb push su /system/xbin/su
adb push superuser.rc /system/etc/init/
4. reboot
Gapps
select one way of below
1. flash MindTheGapps-9.0.0-arm-20181119.zip
2. download OpenGapps Pico (Not support other version due to limited space of /system
upload gapps-config.txt and opengapps zip file to the same folder and flash opengapps
Changelog
2019-01-01
* fixed wrong 1080p parameter in AOSP camera, both rear and front camera support 1080P record now.
* fixed wifi hotspot and usb tethering cannot open.
* fixed echo reappear after first call.
* rebase kernel, improve wakeup speed and stability.
* add percent text for offline charging.
* reimport MHL releted code, try to bring up MHL. (not tested)
* QS UI improved for small-size screen.
* keep the crypto name same with AOSP, try to make disk encryption work. (not tested, format /data and storage before encryption if too many files, or get out of memory error and system reboot).
* stop maintaining this device if no critical bug in this update.
2018-11-19
-> Upgrade to Android Pie(CAF 9.0.0), tag: LA.UM.7.2.r1-05300-sdm660.0
-> Features added:1. Privacy Guard(with optional su support, thanks LineageOS)
2. App Firewall(data, wlan and vpn, thanks LineageOS)
3. Showing Network Speed(thanks Jon Haus, ezio84 and other commiters)
4. Launcher with icon pack support(thanks tfitts1212, maxwen, eldainosor and other commiters) -> Fix hidden wireless connection
-> Add DRM support (For Netflix, L3 level, not support HD and higher)
-> Try to fix echo in calls again(not tested, report if not working)
===========================================================
Android Nougat/Oreo start
Download Link:
Only twrp >= 3.2.1 works with ROM >= 20180101
https://mega.nz/#F!VKRggSoL!WAFIK45_IFKhnvlK1eyY4w
Known issues:
1. Hidden network cannot connect.
2. APN needs setting manually to use CDMA data network. (?, not sure, need more tests).
3. Not support 1080P camera record due to outdated kernel driver.
4. Selinux status is on permissive status.
Changelog:
2018-11-01
* md5sum: b957fa0274819a09fd81d2af2958cc69
* echo in calls should fix now, only tested VOIP, need more tests(headset, bluetooth etc).
* with echo fixed, an issue related ES310 chip sleeping that make battery draining fast is also fixed.
- Standby battery time estimate: > 5 days.
- Normal Screen on usage: 5~6 hours.
2018-10-21
*md5sum: 8cbfdceb23c3aa6f382f1a9a79c29004
* fix noise in headset mic
2018-10-19
* md5sum: 9304de676e0dd6428db566b072488e3f
* fix echo audio during calls
* performance tweaks, fix too hot when too many heavy background tasks, now enable all 4 cpu cores by default
* HALs and blobs changes prepare for P
2018-09-01
* md5sum: b7e60c0033b526278468a38cb00f373e
* minor updates and stability improved.
* last update as I'm going to remove all 8.1 source, source will update to github as soon as possible.
* I will try to bring up pie once I get free, but no guarantee and no ETAs.
2018-06-16
* md5sum: da677903b4c5092d57e91f0dc2210a90 aosp-caf-8.1.0-20180616-aries-arch.zip
* bring back Privacy Guard and synchronize to latest LineageOS version.
* fixed sometime the device is too hot while too many background apps and optimize screen-on battery usage.
full battery usage estimated:
>5 hours online surfing with wifi opened(moderate usage, no gaming).
2 days standby (45-50 hours).
3-4 hours(?) using cellular data.
2018-05-06
* md5sum:
- b7121d3f95e91350722da01c8dfdea22 aosp-caf-8.1.0-20180506-aries-arch.zip
- 6988262c9f99c00371a1bc238ffbdf26 aosp-caf-8.1.0-20180506-aries-arch-gapps.zip
* fix gps and compass broken in last build.
* revert media profile changes so screen record now works normally.
* bring back Xiaomi usb otg driver. (Not tested, tell me if it not work)
* enable doze correctly.
* reduce battery usage when WIFI turned off.
* thermal and some kernel tweaks.
2018-04-20
* md5sum: e8fc7f3793d820f279580726f2c34e93 aosp-caf-8.1.0-20180420-aries-arch.zip
* this version is NOT compatible with previous ROM, SO CLEAN DATA/CACHE OPERATION IS REQUIRED.
* switch to CAF source(tag: LA.UM.6.6.r1-07200-89xx.0) instead of Google generic repository. This build contains Qualcomm specific enhancements plus some comunity optimizations, so it gives some improved performanence to this old device (especially pictures slipping and system animation). Thanks to AOSPA and AOSP-CAF.
* fix WiFi hotspot, tethering should work fine now.
* fix audio call volume cannot adjust.
* add firewall(app wifi/data restriction) support to oreo(App info -> Data Usage -> Disable all cellular data access/Disable all Wi-FI data access). Port from Lineage/CM, thanks again for their great works.
* add multiple pointers patch.
* add fake signature patch, for some MicroG users.
* update media profiles, remove 1080p option from camera records.
* now the build type is "user", which will disable adb debugging by default, "adb root" also disabled.
* repatch telephony framework for CDMA users(NOT TESTED).
* it's the final update if no serious issues(this update is to resolve the call volume issue).
2018-03-17:
* This version is expected to be the final version and wouldn't update anymore if no critical issues. I hope you can enjoy this one without obstacles. Source will be updated to github in a few days.
* update to 8.1.0_r17
* update audio configuration files so audio should work flawlessly now.
* update power hal and tweak cpu scheduler, try to make a better battery life.
* remove Privacy Guard (seem have unnormal power usage when data connection opened), revert Apps data path tweak, remove addtion Internet/Sensor permissions(it makes Google Setup Wizard FC).
* fix device hangs while trying power on machine in offline charging mode.
2018-01-27:
(NOTE: new kernel might have problems with some device, please attach your logcat, dmesg and top command result(adb shell -> top -> take a screenshot), plus you device model)
(NOTE 2: If you have installed gapps and don't want to clean data, flash gapps after flash the new ROM, before your first boot, or some app will get a FC, unless reinstall the app)
* Revert to old audio hal so that calling audio works with old configs
* Fix some storage access permission issues. Move all Apps data to /sdcard/AppData, so external storage path that apps got will be /sdcard/AppData/<package name>/
2018-01-19:
* fix system crash when openning gps with IPv6 network
* fix the audioserver crash when using a headphone
* fix app crash when not granted WRITE_STORAGE permission
2018-01-17:
* update to 8.1.0_r7
* switch to new kernel base. After almost one month dialy use test, I decide to abandon the old kernel tree and enable new kernel source tree, so Xiaomi aries now share the same kenel base code with sony huashan(https://github.com/AdrianDC/android_kernel_sony_msm8960t). Adrian DC have been working on AOSP/LineageOS of Sony msm8960 platform for a long time, he also is a recognized and trusted developer of LineageOS. With new kernel, I believe it will be more quickly to bring a features-ready and more stable aries ROM to you. Thanks @AdrianDC for his great work.
* switch to new audio/display/media HAL, report if you have any trouble to aduio, video play and records.
* new kernel support new auto sleep and wakeup (instead of earlysuspend), and many other changes to improve deep-sleep in oreo, so it will be a better battery life when phone is idle.
* adopt some code from Lineage to support CDMA data connection. if you want to report RIL releated issues, please attach both full logcat(adb logcat) and radio logcat(adb logcat -b radio)
* fix power menu not shows correctly
* fix some app cannot open again after force stop
* make lockscreen swipe more easier to unlock
* magisk now can boot properly
2018-01-01:
* fix UI performance. (NEED MORE TESTS)
* port Privacy Guard to aosp-8.1, thanks to team Lineage/CM/SlimROMs (Settings > App & notifications > Privacy Guard)
* superuser now is optional
* isolate app data/files on /sdcard (app now saved data to /sdcard/<package name>/ install of /sdcard/, It make external storage root more neat and more secure in some cases)
* fix alarm not work
* disable permission review, or permissions will reset after every updates
* disable liveshot in case of crashing when touched in video record mode
* secondary try to fix CDMA data connection. (Need feedbacks, plus model)
* fix setting lockscreen pin/pattern nonresponse
* update battery data, try to fix battery value reset. (NEED TEST and FEEDBACK)
* update twrp to 3.2.1
2017-12-09: (Download from here #65)
* Update to 8.1.0_r1
* Enhance security and privacy settings (many thanks to thestinger and CopperheadOS)
** I have added Internet permission and enable permission review for app with targetSdkVersion < 23, If you are not a clean installation, some app might get a FC. Reinstall app and give the permissions(PHONE OR INTERNET) can solve problem.
* Fix Mi2s 32gb with 13MP camera. (NEED TEST)
* Revert kernel gpu driver. Try to solve UI unsmoothly sometime. (NEED FEEDBACK)
* Add CDMA dummy APN patches. Try to solve data connection with CDMA network. (NEED TEST)
* Use old power and charger driver. It works better.
2017-11-19
* initial 7.1.2 and 8.0
Download: OUTDATED! FIND UPDATES FROM CHANGELOG
twrp recovery 3.1.1: https://mega.nz/#!RewDnB5Z!1JaIxJ2-wQpd9BmY1MoqIrt0z9rI2pLg6lKL5Z2lsKg
aosp 8.0.0: https://mega.nz/#!FHpTRCQL!j_Z-XirV12iPhxmnIAWA33W5HB1ca0Mep8lsKSiB10g
aosp 7.1.2: https://mega.nz/#!hTIgGT5a!gfap1JU95VeyfYauYcvlaR-VnHwRLRzklLENMwS2jgs
Great!:highfive:
Good work. I'm working on mi2 as well, can I use your rom as a base for fixing the ril? thanks!
lol，cdma 1x can be load ，but network doesn't
---------- Post added at 02:38 PM ---------- Previous post was at 02:35 PM ----------
---------- Post added at 02:41 PM ---------- Previous post was at 02:38 PM ----------
GuaiYiHU said:
Good work. I'm working on mi2 as well, can I use your rom as a base for fixing the ril? thanks!
Click to expand...
Click to collapse
huo zhuo huda
ziiimy said:
lol，cdma 1x can be load ，but network doesn't
---------- Post added at 02:38 PM ---------- Previous post was at 02:35 PM ----------
---------- Post added at 02:41 PM ---------- Previous post was at 02:38 PM ----------
huo zhuo huda
Click to expand...
Click to collapse
You are the first one to make the ril work after M. I think this is exciting.
great！
Can't not connected to hidden WiFi
GuaiYiHU said:
Good work. I'm working on mi2 as well, can I use your rom as a base for fixing the ril? thanks!
Click to expand...
Click to collapse
Yes
ziiimy said:
lol，cdma 1x can be load ，but network doesn't
---------- Post added at 02:38 PM ---------- Previous post was at 02:35 PM ----------
---------- Post added at 02:41 PM ---------- Previous post was at 02:38 PM ----------
huo zhuo huda
Click to expand...
Click to collapse
Sorry, it wouldn't be fixed as I don't have a CDMA SIM card right now.
UI is very unsmooth. After installing gapps got 'setup wizard has stoped' error. Can it be fixed?
GuaiYiHU said:
Good work. I'm working on mi2 as well, can I use your rom as a base for fixing the ril? thanks!
Click to expand...
Click to collapse
great my big brother
我是中国用户，小米2太厉害了，居然能用上功能正常的安卓8.0，感谢xda论坛
I am a Chinese user, millet 2 is too powerful, actually able to use the normal function of Android 8.0, thank xda forum
duplicated
-Tex- said:
UI is very unsmooth. After installing gapps got 'setup wizard has stoped' error. Can it be fixed?
Click to expand...
Click to collapse
if you open logcat and got error like this:
Code:
I zygote : Rejecting re-init on previously-failed class java.lang.Class<com.google.android.gms.org.conscrypt.NativeCrypto>: java.lang.UnsatisfiedLinkError: dalvik.system.PathClassLoader[DexPathList[[zip file "/system/framework/com.android.media.remotedisplay.jar", zip file "/system/framework/com.android.location.provider.jar", zip file "/system/priv-app/PrebuiltGmsCore/PrebuiltGmsCore.apk"],nativeLibraryDirectories=[/system/priv-app/PrebuiltGmsCore/lib/arm, /system/lib, /system/vendor/lib, /system/lib, /system/vendor/lib]]] couldn't find "libgmscore.so"
this is a temporary solution.
1. extract Phonesky.apk and PrebuiltGmsCore.apk from Core/vending-arm.tar.lz Core/gmscore-arm.tar.lz (320/priv-app/PrebuiltGmsCore) in opengapps zip file.
2. extract Phonesky.apk to Phonesky and extract PrebuiltGmsCore.apk to PrebuiltGmsCore use any zip software, or you can run:
Code:
unzip PrebuiltGmsCore.apk -d PrebuiltGmsCore
unzip Phonesky.apk -d Phonesky
the Phonesky and PrebuiltGmsCore folders should like this:
Code:
➜ ls Phonesky
AndroidManifest.xml
android-support-multidex.version.txt
assets
build-data.properties
classes2.dex
classes.dex
com
lib
libs
META-INF
org
res
resources.arsc
Code:
➜ ls PrebuiltGmsCore
AndroidManifest.xml
assets
build-data.properties
classes2.dex
classes3.dex
classes4.dex
classes.dex
com
googledata
HACKED-META-INF
lib
META-INF
org
res
resources.arsc
3. then, push the lib to your phone by adb:
Code:
adb root && adb remount rw
adb shell mkdir -p /system/priv-app/PrebuiltGmsCore/lib/arm/
adb push PrebuiltGmsCore/lib/armeabi-v7a/* /system/priv-app/PrebuiltGmsCore/lib/arm/
adb shell mkdir -p /system/priv-app/Phonesky/lib/arm/
adb push Phonesky/lib/armeabi-v7a/* /system/priv-app/Phonesky/lib/arm/
it should works now, tested with gapps nano.
It seem like an uncorrectly odex/install problem, I need more time to investigate it.
windbells said:
it should works now, tested with gapps nano.
It seem like an uncorrectly odex/install problem, I need more time to investigate it.
Click to expand...
Click to collapse
Should i do this after installing gapps or do it instead of installing gapps? What about ui smoothness?
-Tex- said:
Should i do this after installing gapps or do it instead of installing gapps? What about ui smoothness?
Click to expand...
Click to collapse
After installing and reboot to system.
If you are still facing ui Smith less after solve the gapps opening, try clean data and cache, if still exists, please attach logcat log and describe you r usecase in a more detailed way, and also, what's your phone model name? 2? 2S? 2S with 13m camera?
I just tried on my Mi2S 16G with 8MP camera,
Almost everything works well, but UI is very unsmooth.
I have 32GB with 13MP camera, but this is my daily use phone, so I don't want try on it.
Update:
I tried to grab logcat and dmesg to try to find the reason about UI unsmooth.
But the information is too much that I have no idea to find...
So I upload them to my mega.co.nz
logcat:
https://mega.nz/#!KYMVHByT!Mytx_PG8BqhOrMauhr-NtcsqO7Qw7RIw7i2ydJsNj-4
dmesg:
https://mega.nz/#!6UF30KRS!4qzlNs0UFMBHacNX_WsJIrlVmINNsqzVHCYAdkvkaAI
windbells said:
After installing and reboot to system.
If you are still facing ui Smith less after solve the gapps opening, try clean data and cache, if still exists, please attach logcat log and describe you r usecase in a more detailed way, and also, what's your phone model name? 2? 2S? 2S with 13m camera?
Click to expand...
Click to collapse
I will try tomorrow. My phone model mi2sc 16 Gb with 8m camera.
joe820730 said:
I just tried on my Mi2S 16G with 8MP camera,
Almost everything works well, but UI is very unsmooth.
I have 32GB with 13MP camera, but this is my daily use phone, so I don't want try on it.
Click to expand...
Click to collapse
It seems that my kernel not working on 13MP camera, according to the feedback.
I think Mi2S with 8MP camera should work fine as I using 2SC 16GB with 8MP camera. I think it's really smooth after had a data cleaned boot. Even after I installed the opengapps, it's smooth as usual. Can you describe you usecase or record a short video that shows UI stucked.