HD2 trying to install an Android ROM. I need to install MAGLDR on it. I've tried installing like 1000X's and nothing. Tried MAGLDR 1.0, 1.11, 1.12, and 1.13 and nothing. Stuck on 0%. Booted in Bootloader than got USB on it than tried. Also did run Admin (Vista)
Specs:
PB81120 SS-B3
SPL 2.08.0000 8G XE
0X05
0X50
R 2.08.50 02 2
G 15.34.50.07U
D 2.10.82076 8G
Not sure what to do. Everything else works fine. Loads into Windows 6.5 perfectly. At roads end, do not have any other options. Any helppppp?
myTouch3GS said:
HD2 trying to install an Android ROM. I need to install MAGLDR on it. I've tried installing like 1000X's and nothing. Tried MAGLDR 1.0, 1.11, 1.12, and 1.13 and nothing. Stuck on 0%. Booted in Bootloader than got USB on it than tried. Also did run Admin (Vista)
Specs:
PB81120 SS-B3
SPL 2.08.0000 8G XE
0X05
0X50
R 2.08.50 02 2
G 15.34.50.07U
D 2.10.82076 8G
Not sure what to do. Everything else works fine. Loads into Windows 6.5 perfectly. At roads end, do not have any other options. Any helppppp?
Click to expand...
Click to collapse
mine reads:
PB81100 HX-BC
SPL 2.08.0000 8G XE
0X05
0X40
but im using 2.15.........radio,which version are u using,that's more than likely ur problem
here's a link to the radio u need.........http://www.multiupload.com/QP0IWGY42F
Can't load magldr on 2.08.0000,,,, that's a stock spl. Needs to say 2.08.hspl
Download HSPL3 from here
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
Put your phone in bootloader and run the HSPL3 program. It will say HSPL 2.08 and hit next. Then when it finishes, put it in bootloader and flash magldr.
Related
Started out with SPL-2.10. converted it into SPL-2.08.0000 using HSPL3_pkg
I want to use NAND which requires 2.08.HSPL ....
Started the conversion from SPL-2.08.000 into 2.08.HSPL...
I check the tricolor boot page...the ff comes up after conversion:
PB81120 HX-B3
SPL-2.08.000 8G XE
Tried to a number of times with no success..(as admin) (it even says "successful Hack!" with "2.08.HSPL" drop down chosen from the HSPL3 program...
can some1 help...thnks in advance!
Michael// said:
Started out with SPL-2.10. converted it into SPL-2.08.0000 using HSPL3_pkg
I want to use NAND which requires 2.08.HSPL ....
Started the conversion from SPL-2.08.000 into 2.08.HSPL...
I check the tricolor boot page...the ff comes up after conversion:
PB81120 HX-B3
SPL-2.08.000 8G XE
Tried to a number of times with no success..(as admin) (it even says "successful Hack!" with "2.08.HSPL" drop down chosen from the HSPL3 program...
can some1 help...thnks in advance!
Click to expand...
Click to collapse
In any case, if you had the 2.10 bootloader on t mobile version, you would just check the 2.08 HSPL option instead of the regular 2.08 option.
Here is the guide to install HARDSPL for T Mobile USA Version HD2.
http://forum.xda-developers.com/showthread.php?t=653614
There is also a link near the top if you have the european version HD2 which uses a different HSPL software.
Re read the stickies on the forums, its step by step.
After you have the 2.08 HSPL you can then flash MAGLDR for NAND.
Also make sure you boot into windows mobile and plug in your phone so Mobile device center or active-sync can install all the necessary drivers for your phone!!
i cant flash my HD2 any ROMs or NAND or eaven run task29 all rom flash just stuck to 0% and then comes USB connection error or something else. Im stuck whit energy rom i downloaded a while a go. I use radio 2.15.50.14 and HSPL4 but i shows spl-2.08. When i try flash or use task29 to clean my phone nothing happens.. What should i need to do to make me able to run NAND .... Thanks!!!
but I shows spl 2.08
Click to expand...
Click to collapse
...... yes, go on, the rest of that number is?...
Cos if it says 2.08.0000 then that's stock and wont allow flashing.
yes, this is all thet read on security unlocked / boot ? menu
PB81*** HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
would it help to install some different hspl / spl like 3/4 that u have linked? would those allow me to flash ROMs again? or how would i be able to do those? Thanks!
it will not only help, it is the only way, since your spl says 2.08.0000 which is stock meaning you DO NOT have hspl installed. Just because you used hspl program to set 2.08.0000, you have installed a stock spl, NOT hspl, so yes, use any hspl (2,3 or 4, doesnt really matter) to change your spl to 2.08.hspl.
Well I've had my HD2 With different android Rom's for about 1 year now I'd say. Recently I've been having a problem where the touchscreen doesn't work at all. Sometimes it works And I can use it Perfectly. I flashed the original Windows 6.5 Rom that I downloaded from the T-mobile website and I wanted to know if that took off HSPL. I want to return it Back Because I have a warranty and I wanted to know if it was ok to return it now. Please Help.
Why don't you just Volumebuttondown and power on and see if HSPL is gone?
I forgot about that. I just did it and it says
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
0x50
CotullaHSPL
How do I remove HSPL then ?
JDog10 said:
I forgot about that. I just did it and it says
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
0x50
CotullaHSPL
How do I remove HSPL then ?
Click to expand...
Click to collapse
You need to flash a stock ROM via SD card. This may help, I don't know, or you could also go to MSkip's stickied thread.
By either installing a TMOUS ROM through the sd (rename to LEOIMG.nbh and put on sd then boot) or by using the HSPL package to remove it (install SPL)
Sir,
I have HTC HD2 hang on HTC logo. When we press - Volume + power button it shows:
PB8100 HX-BX
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X40
I tried it to hard reset, but same. No use of hard reset.
Please reply thank you.
Firstly...i believe u try to flash it to android rom
1. YOU NEED A RADIO WHICH SUPPORTS 576 RAM (2.08.50 or later should be fine but the Radio NEEDS to be 2.**.50.**). I recommed the 2.15.50.14 Radio
2. YOU NEED HARDSPL 2.08 INSTALLED ON YOUR DEVICE TO FLASH MAGLDR
3. MAGLDR 1.13 package
For greater explaination...please read completely without skip any step from this tred
http://forum.xda-developers.com/showthread.php?t=893948
Did you try to update your phone????
Sent from my HTC HD2 using XDA App
task29, wipe all cashes & use more stable ROM
i have hd2 hang at HTC logo without progress bar under.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
cotullaHSPL 0x50
how can repair it?
Hello, I'm trying to flash my friends stock HD2 with
[11JAN'12][ZIP] ★★★★HyperDroid-CM7-v5.7.0[a2sd][CyanogenMod7 LEO 2.3.7][fikret-r1.15] http://forum.xda-developers.com/showthread.php?t=769026
I can't figure out what I'm doing wrong and I need help.
Some info on the HD 2 I'm trying to flash:
OS version: 5.2.21913 (21913.5.0.94)
ROM size: 512 MB
ROM version: 3.14.409.2 (04666) NOR
Radio: 2.15.50.14 (Stock)
I used HSPL4
When I boot the phone with vol.down+power it says:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
When I connect the phone to my PC with microUSB the white square in bootloader changes from SERIAL to USB, but WMDC on PC says Not Connected.
When the phone is turned on and in Windows Mobile, WMDC says Connected, and I can browse the files on the phone from my PC.
MAGDLR finds the phone and says update from Image Version 3.14.409.2 to Image Version 2.00.000.0. When I click next the phone boots into bootloader mode and then the percentage bar show up on both PC and phone. The bar does not move, stays at 0% for 5 minutes until MAGLDR times out.
I have tried with 3 different PCs (Windows 7 x86 and x64 and Vista x86), 2 different USB cables. Antivirus is disabled, and I run MAGLDR in admin mode. I also tried MAGLDR111. Same result on all. 0%
Any takers?
you need hspl 2.08.
If you have installed this, you magldr flash will go ahead
Haven't I already got hspl 2.08
klorin said:
...
I used HSPL4
When I boot the phone with vol.down+power it says:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
...
Click to expand...
Click to collapse
No, this is SPL.
take HSPL 2.08 from menu..
With HSPL4 you have different Bootloader.. take the right one
its the last 4 digits that are the telltale, , if an spl ends 0000 its stock, if it ends hspl its, , ,wait for it, , HSPL!
Make sure your Phone is loaded for min 50% better is 100%!!
In 3 Color Bootloader Menu you must have USB Connection!!
In HSPL4 you choose 2.08.HSPL,this is the right one.
Now you follow the description of the Programm.
At least on your Phone you can read a notification like "We hacked it".
Congratulation you have HSPL 2.08 ;-))