flashed the latest cm7 115 version amd upgraded to 118 but the g sensor ( gravity ) doesnt seem to work properly ( in games also) after few hours it becomes laggy and i have to restart the mobile everytime to makke it work properly . had no such problem with oxygen . am using 4 October kernel ,need some help !!
mkr17 said:
flashed the latest cm7 115 version amd upgraded to 118 but the g sensor ( gravity ) doesnt seem to work properly ( in games also) after few hours it becomes laggy and i have to restart the mobile everytime to makke it work properly . had no such problem with oxygen . am using 4 October kernel ,need some help !!
Click to expand...
Click to collapse
extract this to system->lib nd set the same permissions. It fixes this issue for me!
for me too, i have it on my sd for every cm7 install
Should the libril also be changed when updating to 18?
http://forum.xda-developers.com/showpost.php?p=18506755&postcount=1043
I replaced these two files. Dont know if they helped since ive not used cm7 before.
mangoman said:
Should the libril also be changed when updating to 18?
Click to expand...
Click to collapse
I had to in order to have signal!
for me too, i have it on my sd for every cm7 install
Click to expand...
Click to collapse
I do the same!!
spirosbond said:
I had to in order to have signal!
I do the same!!
Click to expand...
Click to collapse
thanx , followed ur steps n its working fine now
Related
Good news for Idea Blade users. The CM7 Rom by Burgerz found here works on our phones perfectly. Camera and touchscreen issues are fixed and the Rom is FAST. I'm using it now, you might want to give it a try
Cheers!
Thanks for handing out the information mate because i was getting lots of PM`s about that reason and i could not give a clear answer.
No problem
hi,
Tried the Rom on my Idea blade and camera gives error. the same error as other versions of CM7. "cannot connect camera"
Format all your partitions from cwm and try flashing again
hi couldn't download the rom from official page, could you please upload to mediafire thanks.
Dear jerrinfrncs,
Try this link: h**p://burgerz.pro/zte-blade/roms/
Rapier07 said:
Good news for Idea Blade users. The CM7 Rom by Burgerz found here works on our phones perfectly. Camera and touchscreen issues are fixed and the Rom is FAST. I'm using it now, you might want to give it a try
Cheers!
Click to expand...
Click to collapse
What about the battery performance? How long it last in standby mode?
praatikr said:
What about the battery performance? How long it last in standby mode?
Click to expand...
Click to collapse
I get one day with data always on, some games, browsing and music
Rapier07 said:
Format all your partitions from cwm and try flashing again
Click to expand...
Click to collapse
I Have an Idea Blade. Had problem with both camera and touchscreen in CM7.1.0. Yesterday i tried the CM7 Rom by Burgerz. Touchscreen is working properly but still can't use the camera. The same "cannot connect camera" error appears.What are all the partitions should i format? I've formatted data, cache and dalvik partitions. Still the problem persists.
zajith said:
I Have an Idea Blade. Had problem with both camera and touchscreen in CM7.1.0. Yesterday i tried the CM7 Rom by Burgerz. Touchscreen is working properly but still can't use the camera. The same "cannot connect camera" error appears.What are all the partitions should i format? I've formatted data, cache and dalvik partitions. Still the problem persists.
Click to expand...
Click to collapse
Some newer Blades have different hardware which needs different drivers to work. As ZTE doesn't release the source code for these properly, the current roms won't work properly on all of the newer versions. If may be possible that someone can fix it, but without ZTE releasing the sources it will be difficult for them.
jerrinfrncs said:
hi couldn't download the rom from official page, could you please upload to mediafire thanks.
Click to expand...
Click to collapse
i tried to download from that page but it never completes, gets cut off and can't resume. if somebody could upload to mediafire it would be very helpful thanks
I'm running this one from Burstlam and really like it. I prefer it because Burgerz's using and older (and plain) launcher. Camera works fine also.
burstlam
Posted 17 February 2012 - 08:33 PM:
latest build , OC, wifi-UV, 2 way Recording enabled Kernel. (ie.: no CPU UV)
Full Lanaguage, Latest repo sync + Fixed ICS rotation Animation.+ ... many other
to-be-merged Gerrit Patches
Normal Version:
http://hotfile.com/dl/146855038/9e67238/N353X-35-Full-Lang-signed.zip.html
md5 : 7b1b30ec08274fac0d961817543e3794
From: http://android.modaco.com/topic/335...-237/page__st__12620__p__1902127#entry1902127
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
You might want yo PM the dev about it. I had similar issues on CM stable but not anymore. Also you can give a try to LewaOS and other Chinese roms. They are based on cm7 fot the V880 which is what idea blade is.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
I also had the same problem with CM7.1. Formatting the cache and data partitions might make the touchscreen work (worked for me). Even though you format the partitions, touchscreen will stop working after the phone get into sleep mode and you have to format the data and cache partitions every time the touchscreen stops responding.
I have heard that Libraginger works fine on ZTE-U V880. But the download link seems to be broken. I am working on CM7 Rom by Burgerz even though camera is not functioning as i feel it is much stable and lesser buggier than official ZTE rom.
Amphoras said:
Some newer Blades have different hardware which needs different drivers to work. As ZTE doesn't release the source code for these properly, the current roms won't work properly on all of the newer versions. If may be possible that someone can fix it, but without ZTE releasing the sources it will be difficult for them.
Click to expand...
Click to collapse
Is there any way to backup driver for the camera from the stock rom and use it the current custom rom? I know the kernels are different. Still is there any chance?...
Sent from my Blade using XDA App
zajith said:
Is there any way to backup driver for the camera from the stock rom and use it the current custom rom? I know the kernels are different. Still is there any chance?...
Sent from my Blade using XDA App
Click to expand...
Click to collapse
Not that I know of, sorry.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
Even i had the same touchscreen problem when i installed MMHMP on my idea blade. All i had to do is restore the stock rom which was working fine and then i again installed MMHMP and its working fine.
Any method for custom partition in idea blade?
I want more space
Hi,
Internet turns off after being idle for some time on ICS 4.04 this problem was there on my phone as soon asi switched from Stock to Cutom 4.03.. even after getting 4.04 this problem persists.
Plz tell me a way around this problem as i have to stay connected all the time..
I ahve to hence toggle the "data enable - On /off" for it to get connected .. and some times whn that doesnt work.. i hv to reboot the phone..
Help .. Help!!!
Guys please help me.. 90 smthing views and no replies.. help me out!!!
Have you changed the baseband to the Asian baseband? that can help.
Never had this problem even when I never changed my baseband. Please post result after changing the baseband.
brajesh.sharma87 said:
Have you changed the baseband to the Asian baseband? that can help.
Never had this problem even when I never changed my baseband. Please post result after changing the baseband.
Click to expand...
Click to collapse
Brajesh.. i had to change the abseband initially for a signal to appear in the first place.. i was on the india..china SEA baseband.. on your request i have tried the other basband as well Hongkong / Taiwan though its the same frequency .
I think i may have put some settlings which might be doing this...
Regualily an "E" sign appear on top when i am online ( E-Edge probably) but i use 2G only.. i read sm whr to save battery .. mobile cuts of internet on phone . Is this why it is happenenig with me??? Please tell me a way around ...
same problem here.
I'm from Poland, Play Mobile. I tried to change bandwidth few times, now I think, internet stops to switching off. Dunno what is causing this problem. On cm7 never happend. However after flashing CM9 from epsylon, network indicator is showing 3g (instead of H in stock or cm7) but in the system information is HSPA.
sorry for my bad english
give today's Epsylon build a try... the first one that data stays connected for me.
ktmbikerman said:
give today's Epsylon build a try... the first one that data stays connected for me.
Click to expand...
Click to collapse
thanks i will try this... but the problem is that i have a defy not a defy plus.. the build you are refering to is for defy + i think....today.. when i tried the 120406 nightly after patching the zip of nightly and gapps.. when i tried to run the kernel(CM7 one).. the phone shutdown.. didnt pose a problem in restarting.. but it did smthing it wasnt suppose to do... hence i am little apprehensive.. so plz clarify which files to use..which kernel. and nightly file..
If you have red lense, then you can use defy+ build by installing cm9 kernel.
If you want to return to a defy build later, just install cm7 kernel again
You can find download links on first page of this post: http://forum.xda-developers.com/showthread.php?t=1432100
javonera said:
If you have red lense, then you can use defy+ build by installing cm9 kernel.
If you want to return to a defy build later, just install cm7 kernel again
You can find download links on first page of this post: http://forum.xda-developers.com/showthread.php?t=1432100
Click to expand...
Click to collapse
Defy, Green - Then i am comfortable with the present build i am on.. But this really doesnt solve my problem.. can this be solved without flashing it again.. Very few seems to face this perticular problem..Help me out!!!
Its very annoying...
coolatin said:
Defy, Green - Then i am comfortable with the present build i am on.. But this really doesnt solve my problem.. can this be solved without flashing it again.. Very few seems to face this perticular problem..Help me out!!!
Its very annoying...
Click to expand...
Click to collapse
You will get CM9 for Defy builds by Epsilon here
Do you flashed the rom only one time? Or have you flashed the rom twice?
For me i had the same problems on cm7 but after flashing latest epsylon all work great. Perhaps try a full wipe and flash once more. (make a backup before and you have nothing to loose or?)
I have defy green lense and after choose the right baseband i have no problems, beofre with asian baseband in germany it doesnt work very well. So be sure you have choose the right baseband and/or full wipe and flash
for me new nighties updated via builtin updater solved problem. Now defy works perfect on ics.
edit:
nope.. it's switching off again... damn...
pranks1989 said:
You will get CM9 for Defy builds by Epsilon here
Click to expand...
Click to collapse
I dont hv a problem with the builds.. I can get that myself.. infact i have the latest one already installed.. what i want is smone to fix my problem of data connectivity.. the data goes off after being idle for smtime.. Help me with this...Please.. anyone..
Any heads up on my problem??
coolatin said:
I dont hv a problem with the builds.. I can get that myself.. infact i have the latest one already installed.. what i want is smone to fix my problem of data connectivity.. the data goes off after being idle for smtime.. Help me with this...Please.. anyone..
Click to expand...
Click to collapse
Have you tried taking your sim card out and giving it a good clean? I actually found that mine was bent from getting hot. After a clean and straighten it works very well with the latest ics builds. I was getting continual disconnects previously.
Sent from my MB526 using xda premium
I had the same issue on my D+ when I was on Quarx latest cm9 nightly. Initially the network doesnt show up at all. So i had to use baseband switcher to select India after flashing every Cm build. Then switched to latest cm7.2 by Quarx, but strangely it happened on 7.2 too. Then I just casually switched baseband to China ME722 1.10 and now the issue seems to be resolved. I'm yet to try the same on Cm9, will be trying it out in a day or two.
coolatin said:
Any heads up on my problem??
Click to expand...
Click to collapse
I can´t help you but i have a same problem like you. And i´m from the Czech Republic. Maybe i can change the bb.
Changing the baseband to other locations did not help the cause.. the same problem still persists..
Also my SIM seems fit and fine( )... and i cleaned it.. ( just for the sake of it)..but the problem is still thr
does no one have a proper solution for this...
I'm using Epsylon's 6th April build and it works perfectly fine. Even what I feel like; it is the best ROM to date which does not disconnects automatically as I face this problem with other ROMs.
Rajneeshgadge17 said:
I'm using Epsylon's 6th April build and it works perfectly fine. Even what I feel like; it is the best ROM to date which does not disconnects automatically as I face this problem with other ROMs.
Click to expand...
Click to collapse
i used that ROM as well it was there in dat ROM as well.. i am stil facing when i am on 4.04 16 Apr build.... still its there..
Could you discuss the setting for internet etc... so i can check if thrs anything i can do on that front.. its selected on "only 2G" with baseband set to SEA (Asia) ...lemme knw about that front.
this problem is the single most irritating problem i am facing ever since i put a custom ROM..
PLZ... some one for FiX for this!!!
HI , I am new here , i registered in many motorola forums with no luck in getting any help , i only just discovered this problem , some of my buttons on my physical keyboard dont work , but the next day they were working fine again then the same buttons stopped working again , i'm thinking it could be a software issue but am not sure , i was on froyo 2.2 then officially updated to gingerbread through motorola site , but when i was on froyo i hardly used it so wasnt sure if the keyboard was playing up back then , before i discovered this keyboard problem a few days ago i tried to root my phone using a software (petes motorola tools) it didnt root it came up with an error message , so am thinking if this has anything to do with the problem , the buttons that dont work are like half the letters from the keyboard the other half work fine , but when the problem happens again its the same letters that stop working , as i said all buttons started working again the next day and then problem came back again , so i am very confused please help..
Try to do a full wipe (factory reset) from stock recovery.
---UFO--- said:
Try to do a full wipe (factory reset) from stock recovery.
Click to expand...
Click to collapse
thanks for your advice , is that the standard factory reset from the phone , if so i have tried doing a factory reset , and it didnt fix the problem ,
you have to root your phone and install the following app from play store: https://play.google.com/store/apps/details?id=de.rmdir.ms2debounce use the settings from the picture in the store. if this doesn't solve your problem, you need to send it to the service. mine has it's third hw keyboard now. but now it's fine since 7 months!!!
lulli1 said:
you have to root your phone and install the following app from play store: use the settings from the picture in the store. if this doesn't solve your problem, you need to send it to the service. mine has it's third hw keyboard now. but now it's fine since 7 months!!!
Click to expand...
Click to collapse
i tried to root it with petes motorola tools , but it came up with an error , do you know any other ways to root it , i dont mind replacing the keyboard , but i need to be sure its the keyboard and not the software ,
deejay_uk said:
i tried to root it with petes motorola tools , but it came up with an error , do you know any other ways to root it , i dont mind replacing the keyboard , but i need to be sure its the keyboard and not the software ,
Click to expand...
Click to collapse
ok so i have rooted the phone and installed the debounce app , now can you tell me is there something i need to do on the app ? how does it work
its self explaining...
just install it and set it up like on the pictures in the store...
it changes the keyboard delay. you should realize it as soon as you start typing. if not play with the settings. if its not better than, you have to use the service to repair your device.
lulli1 said:
its self explaining...
just install it and set it up like on the pictures in the store...
it changes the keyboard delay. you should realize it as soon as you start typing. if not play with the settings. if its not better than, you have to use the service to repair your device.
Click to expand...
Click to collapse
i have tried the debounce app , it doesnt solve my problem even after messing around with settings , i dont change the keyboard i am very sure its a software problem , even if i replace my keyboard i am very sure the problem will still remain , i cant believe i am the only person with this problem i have searched all over the internet no one has had this problem yet
if you want to be shure, flash another rom as cm10 or cm10.1 or ms2ginger or miui. if your problem still exists you can be shure....
lulli1 said:
if you want to be shure, flash another rom as cm10 or cm10.1 or ms2ginger or miui. if your problem still exists you can be shure....
Click to expand...
Click to collapse
can someone post some links how to flash my phone with cm 10 or 10.1
cm10 is the most stable one this time... here is the link. read the first post and do exactly what is written....
http://forum.xda-developers.com/showthread.php?t=1827801
lulli1 said:
cm10 is the most stable one this time... here is the link. read the first post and do exactly what is written....
http://forum.xda-developers.com/showthread.php?t=1827801
Click to expand...
Click to collapse
thank you sir - i will try this on my new phone - sorry for the late reply , but i have sold the phone , fortunately only lost out by few pounds , but have purchased another one , the buyer has informed it is working fine on a custom rom ,
Hello developer i flashed the cm on my samsung galaxy grand 2 from this link
http://forum.xda-developers.com/galaxy-grand-2
Here its said that the voice works allright but im facing problem though i have the latest version and NK1 baseband nd followed everything whats written on it. The performance of the rom is excelent but the voice problem bars me from using it as daily driver . plz help me
rishabh06553 said:
Hello developer i flashed the cm on my samsung galaxy grand 2 from this link
http://forum.xda-developers.com/galaxy-grand-2
Here its said that the voice works allright but im facing problem though i have the latest version and NK1 baseband nd followed everything whats written on it. The performance of the rom is excelent but the voice problem bars me from using it as daily driver . plz help me
Click to expand...
Click to collapse
Hav u set SIM 1 as 3G and SIM2 as 2G only?
VigneshS007 said:
Hav u set SIM 1 as 3G and SIM2 as 2G only?
Click to expand...
Click to collapse
Yes i did try
rishabh06553 said:
Yes i did try
Click to expand...
Click to collapse
R u on Latest AIO 3 or CM12.1 by Aapav?
VigneshS007 said:
R u on Latest AIO 3 or CM12.1 by Aapav?
Click to expand...
Click to collapse
Yes im on the latest version..nd now it works fine..but now i m suffering another problem...my phone hangs and freezes too much ....nd many apps fc ...plzzz help
rishabh06553 said:
Yes im on the latest version..nd now it works fine..but now i m suffering another problem...my phone hangs and freezes too much ....nd many apps fc ...plzzz help
Click to expand...
Click to collapse
Thats the major problem of CM ROMs bcoz of background running apps.... check the Grand 2 General section to fix lag in CM12.1 bro
I Used a many of roms but every rom had a problem
so I Decided to back to the Stock rom ...
I Cleared and wipe cache and dalvik cache then I flashed it by using ODIN
The Rom is working fine but the Wi-fi didn't work at all
When I Click on Wifi icon it still the same and won't turn on
Please help me guys
ur using stock ROM ?
abhishek shanubhogh said:
ur using stock ROM ?
Click to expand...
Click to collapse
yes i still use it ,, but the wifi still doesn't work yet
Sir root you phone... Get recovery and install rio kernel
Wifi will work
It happened to me too
I. Fixed it by installing rio! ?
mani_photoworkz said:
Sir root you phone... Get recovery and install rio kernel
Wifi will work
It happened to me too
I. Fixed it by installing rio!
Click to expand...
Click to collapse
Bro .. can u send me the link for the kernel please
but please not on dev-host site cuz it's not working at all
http://forum.xda-developers.com/galaxy-grand-2/orig-development/kernel-deds-kernel-beta-001-t2806760
Here you go