Database Users

[Research]Mhz vs Quadscore/LinPack #Update

Mhz vs Quadscore on [beta] desire hd2 #Update
hey here same interesting tests i did
if i locked my phone in power saving mode u get
CPU and Score
Mhz ScoreA CPU Mem IOps Linpack
256Mhz 900 1750 525 1600 11
384Mhz 1050 2580 618 2000 16
460Mhz 1350 3000 990 2600 19
500Mhz 1600 3250 1050 2800 20
768Mhz 2200 4600 1120 3500 29
1000Mhz 2500 5400 1120 4150 35.5
1200Mhz 2700 6200 1120 4380 40
maybe there could be another mode that will use
500mhz most of the time [for normal using or one app using Cpu]
and when playing or using heavy 1000Mhz
[Dev]
i see that memory score is not linear
maybe could fixed by our greatest devers

I hope u do understand that these results are total bullcrap.
The newest dual core chips dont even get 2.7k scores in that benchmark.
Something in the desire HD build farks up the scores simple as that.

If you look at the quadrant advanced score, you'll notice it only gets those scores because of the I/O score. The processor one is about the same or a little more than teh Nexux 2.2, so if you underclock to 500 mhz you may get a total of 1600, but your processor score will suck badly and your phone will lag and really suck.
Keep your max at 998 and your min at 245 and use smartass and you should be fine.

orangekid said:
If you look at the quadrant advanced score, you'll notice it only gets those scores because of the I/O score. The processor one is about the same or a little more than teh Nexux 2.2, so if you underclock to 500 mhz you may get a total of 1600mhz, but your processor score will suck badly and your phone will lag and really suck.
Keep your max at 998 and your min at 245 and use smartass and you should be fine.
Click to expand...
Click to collapse
Agree.
Sent from my HTC HD2

orangekid said:
Keep your max at 998 and your min at 245 and use smartass and you should be fine.
Click to expand...
Click to collapse
+1 for this.
My HD2 has been running smoothly with 245-998MHz smartass for weeks now, battery life has been great too.

i update it with more info check post1
i see that memory score is not linear
maybe could fixed by our greatest devers

Quadrant scores are useless. RUn it, then run it again, you'll get different results.
I don't use SetCPU at all, it's just not needed.

According to my Quad Test im getting a total of 2196 with 245-998mhz with smartass on SetCPU my CPU: 4450 Mem: 1127 I/O: 4716 2D: 273 3D: 412 Work that one out

[Q] OC kernel

Is there a stable 1.3Ghz OC kernel because i tried FuguMod 2.2 BE but my phone overheated.

RafayelG said:
Is there a stable 1.3Ghz OC kernel because i tried FuguMod 2.2 BE but my phone overheated.
Click to expand...
Click to collapse
Except 2.2 FuguMod, No
Maybe you kept 1.3Ghz continously...
Try using OnDemand or Conservative Scaling and profiles of screen off and stuff..

dharamg3 said:
Except 2.2 FuguMod, No
Maybe you kept 1.3Ghz continously...
Try using OnDemand or Conservative Scaling and profiles of screen off and stuff..
Click to expand...
Click to collapse
i just saw one at Kyrillos' Rom Here changelog of V5.0 and 4.1 but i can't find them on Marcellusbe's thread

RafayelG said:
i just saw one at Kyrillos' Rom Here changelog of V5.0 and 4.1 but i can't find them on Marcellusbe's thread
Click to expand...
Click to collapse
Ohh...those 1300MHz are Alpha kernels and full of bugs..
I've tested it...and i tell you, you dont want those...
better to try using Profiles of SetCPU with 2.2BE

dharamg3 said:
Ohh...those 1300MHz are Alpha kernels and full of bugs..
I've tested it...and i tell you, you dont want those...
better to try using Profiles of SetCPU with 2.2BE
Click to expand...
Click to collapse
do you got any sugestions for profiles?

SetCPU:
1) Max: 1300 Min: 166 Scaling: Ondemand Set on Boot:Tick
2) Profiles: Enable
Battery < 50% Max:667 Min:166 Scaling: Ondemand Priority: 80
Screen Off Max:222 Min:166 Scaling: Ondemand Priorty: 100
Time(Set the time when you are usually asleep) Max: 333 Min: 166 Scaling: Ondemand Priority: 90
3) Advanced: Set on boot
Up Threshold: 90
PowerSave Bias: 400

dharamg3 said:
SetCPU:
1) Max: 1300 Min: 166 Scaling: Ondemand Set on Boot:Tick
2) Profiles: Enable
Battery < 50% Max:667 Min:166 Scaling: Ondemand Priority: 80
Screen Off Max:222 Min:166 Scaling: Ondemand Priorty: 100
Time(Set the time when you are usually asleep) Max: 333 Min: 166 Scaling: Ondemand Priority: 90
3) Advanced: Set on boot
Up Threshold: 90
PowerSave Bias: 400
Click to expand...
Click to collapse
trying it now will report tomorrow

Post your Undervolt Settings here

Ok I did this for my Xoom and got much better battery, so I also applied this to my wife's Galaxy S2. Here we go.
Governor: Smartass2
Clock Speeds:
1400mhz - 1275
1200mhz - 1175
1000mhz - 1075
800mhz - 1025
500mhz - 850
200mhz - 800
This is where I am at so far on my settings stable. Post what you have and maybe we can find a happy medium with these chips to help battery life out for our phones and roms.
I can also upload the SetCPU saved voltage settings also if requested.

Governor: ondemand
Clock Speeds:
1400mhz - 1275
1200mhz - 1175
1000mhz - 1075
800mhz - 975
500mhz - 875
200mhz - 825
If I try to decrease the last 2 clock voltages 25mv more it crashes.

Might help if you post what kernel and ROM your currently using!
Im trying to find some nice voltages for Stock 2.3.5 and Siyah 1.7.7 kernel

I use stock rom MUGKG2 2.3.3 (Canada rom) and Ragemod U1 v1.1b kernel.
my phone sometimes crashes also but I don't care much since my battery life is very good. I achieve 20h average battery life.

Undervolt settings.

Im looking for stable undervolt settings I have currently mine set at
1600 Mhz - 1400 Mv
1400 " - 1300 "
1200 " - 1250 "
1000 " - 1175 "
800 " - 1050 "
500 " 950 "
200 " - 850 "
100 " - 825 "
My settings are stable but maybe someone can put out where I can still undervolt and retaining stability.
Im using stock + Siyah Kernel.

I'm not trying to be rude, but it's a bit useless since not every devices can handle the same settings...
And of course you can still undervolt. You will find YOUR best settings when you're at the lowest values and your phone is still stable. If you're going too low, you'll have to reboot the phone and set the voltage a bit higher.
But if you want an idea, mine is running rock solid with these settings :
100MHz @ 825mV
200MHz @ 825mV
500MHz @ 850mV
800MHz @ 950mV
1000MHz @ 1050mV
1200MHz @ 1150mV
I'm also on stock KI8 + Siyah 2.0b6

Keep trying by 25mV
Siyah Kernel
Cognition 1.5.1
100Mhz @ 775mV
200Mhz @ 800mV
500Mhz @ 825mV
800Mhz @ 950mV
1000Mhz @ 1050mV
1200Mhz @ 1150mV
1400Mhz @ 1275mV
1600Mhz @ 1350mV

What exactly constitutes stable? Half an hour on a stability test? 1 hour? 2 hours? a month?

jayquinten510 said:
What exactly constitutes stable? Half an hour on a stability test? 1 hour? 2 hours? a month?
Click to expand...
Click to collapse
Stability Test is crap. Play a game for an hour to see if it's stable.

ithehappy said:
Stability Test is crap. Play a game for an hour to see if it's stable.
Click to expand...
Click to collapse
Haha, normally I would, but my HSC exams start tomorrow :/ Last school exams ever! Hopefully will get me into uni. I was just running stability tests in the background when I was studying, but maybe I will leave it till after the HSC.

skuizy said:
I'm not trying to be rude, but it's a bit useless since not every devices can handle the same settings...
And of course you can still undervolt. You will find YOUR best settings when you're at the lowest values and your phone is still stable. If you're going too low, you'll have to reboot the phone and set the voltage a bit higher.
But if you want an idea, mine is running rock solid with these settings :
100MHz @ 825mV
200MHz @ 825mV
500MHz @ 850mV
800MHz @ 950mV
1000MHz @ 1050mV
1200MHz @ 1150mV
I'm also on stock KI8 + Siyah 2.0b6
Click to expand...
Click to collapse
Good setting....i'm using without problem from 3 days.
Question:
Do you set governor from 100 to 1600mhz or standard 1200?

ithehappy said:
Stability Test is crap. Play a game for an hour to see if it's stable.
Click to expand...
Click to collapse
CPU stress test in setcpu is a goodone. USing the two cores completely for testing, most of the games make use of GPU a lot and some CPU, so playing games alone wont help you in testing the stability.

monstrous score on antutu

I guys i want to show you this fantastic score.
I am using dn4 v2.1.
What do you thing?

fede1 said:
I guys i want to show you this fantastic score.
I am using dn4 v2.1.
What do you thing?
Click to expand...
Click to collapse
Loving the score. Got the same thing in mine. What settings did you use to get that score

skyler13 said:
Loving the score. Got the same thing in mine. What settings did you use to get that score
Click to expand...
Click to collapse
Agni main profiles: gaming
Governor: zzmoove game
Scheduler int sd : row
Scheduler ext sd: cfq
Cpu max frequency: 2000
Gpu frequency: 440/700
Gpu threshold: performance
With this setting you will have incredible performances, but at the same time a monstrous battery drain xd.
Our note 2 is still a good phone also for gaming.

fede1 said:
Agni main profiles: gaming
Governor: zzmoove game
Scheduler int sd : row
Scheduler ext sd: cfq
Cpu max frequency: 2000
Gpu frequency: 440/700
Gpu threshold: performance
With this setting you will have incredible performances, but at the same time a monstrous battery drain xd.
Our note 2 is still a good phone also for gaming.
Click to expand...
Click to collapse
Got that score in cm12 with agni stock settings just bumped oc to 1800 and little Uv. Il put photo when i switch back to cm

CM12
2 Ghz CPU
700 Mhz GPU

Mod Edit
Benchmark thread is here:
http://forum.xda-developers.com/showthread.php?t=1916810
Thread closed
malybru
Forum Moderator