Hi all!
My Trinity does not always start up properly. I press the power button and the green light comes on but nothing else shows on the screen and it stops booting. This happens very ramdonly and mostly when it has been switched of for a while. It stops just before showing a screen with red lettering where you can read the ROM version & other stuff. Then I have to soft reset a few times and it will boot up ok.
Most of the time it starts up ok but this is really annoying, can you please help me!!!
Try a hard reset and install a stock/official ROM if the problem persists.
If it is still happenning with an official ROM, might as well send it for repair...
Thanks for your answer. I will try an official ROM and will see what happens.
Power Problem
When i am doing new rom.Somehow my boot gone.Now doesn`t work my power. Can anyone say me how i do that? or back my previous version...
I am using xda atom exec
Hi.
This morning i had a very strange experience with my Blackstone.
While i was copying something o the card i had to disconect the phone and then it started to act strange. It did not want to connect to the computer anymore,every tab in manila frezze up the phone,and the power button did not respond when i pushed it.The power button is working but not in WINDOWS, so it must not be a hardware problem i think.
The rom was Energyrom 23052 i think, and it was working great.
I did a hard reset but the same thing, no change.
Tried flashing again with a different rom Energyrom LEO 23081, but no change,manila freezes the phone and the power button is not working.
So i flashed a Duttys WM6.1 V4.3 ROM Final [MSVC Version], and everything is working normal, even the power button?
So anyone any clue of what is the problem?
Thank you.
thank you all for your help.
prolem solved!
I have this problem too. Have you found the solution?
sorry to hear that but best advise i can give u at the min is to goto the rom posting that u hav and explain ur problem there and if ur on energyrom repost it there and pm me with ur problem
Hello all.
I have one ELF and since some days that my device is very unstable. It just hangs when I press the power button, and the only way is to reset or sometimes remove the battery.
I try´d flashing diferent ROMs but is the same.
I can't install one original ROM because I have a Portuguese ELF and I didn't found my ROM anywhere.
Thanks for all the help.
Mine has some issues when pressing the power button, it goes black as it supose to do but i can not revive it back. (only somethimes not always)
I have that problem too, and ontill now I found no solution.
I try'd flashing diferent radios, but no go.
Hello,
i have a problem with my hd. i am using energy rom latest version and i cant align my screen. the wizard keeps looping with the cross. i called the service and told me that i should install factory rom and that is not device problem. please advise
thanks
Alexis_vti said:
Hello,
i have a problem with my hd. i am using energy rom latest version and i cant align my screen. the wizard keeps looping with the cross. i called the service and told me that i should install factory rom and that is not device problem. please advise
thanks
Click to expand...
Click to collapse
did you press correctly on every "+" signs (total 5)? else it will repeat the same wizard again and again. another thing is try using stylus to press on the signs, more accurate.
else it could be corrupted rom flash. Did it happened before?
No it didnt happend before.....only when i flash a new rom. i press everything as i should
Go for another ROM. Cloudy maybe?
i will try it and i will let you know....thanks
Hi,
i`ve got a problem with my touchscreen, after installing SD card distribution of Android, few restarts later my touchscreen stpped to respond every time when my device is locked, and i have to restart it.
I tried to flash new rom - nothing happend
H-E-L-P !
remove sd card delete the partitions and format - use Easeus free edition for this
Then boot the phone - reun task 29 from your pc then reread the flashing instructions for the rom of your choice and try again - ensure the rom supports your version og HD2 whatever that may be
All done, and doesn`t work. I`m wonderig if is possible, that is malfunction of touchscreen, because it have been changed after it was broken.
i'm having the same issue. after it goes into its first lock screen the touch screen input doesn't work. i've flashed the ROM and also task29 the sucker. i've reverted back to stock ROM too. I'm not running android or even try to install from SD.
Bump..!
Anybody got a solution for this..?
I have a HD2 with android on it.. nand version.. so it runs without sd card..
The phone works fine.. but when you lock it.. the screen doesnt respond anymore.. its running miui at the moment, so i can unlock the lockscreen.. but still the screen doesnt respond..
i see more people having this issues, so i hope to find a solution..
keep on searching..!
So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows
gomez.pl said:
So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows
Click to expand...
Click to collapse
Sure it's hardware: replacing touchscreen is your best choice!
But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..
thommy86 said:
But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..
Click to expand...
Click to collapse
It's a wellknown (hardware) problem for HD2, not related to software(android/wm/wp/whatever).
SO my LEO came back from service, there is a part list that they changed:
- 54h20178-00M pre-assy key, key FPC, UF-KS, w/o Reg
- 74H01549-00M Chassis Pre-assy, black, stainless steel, MLRB81
- 76H04078-00M tape, FPC connector, kapton, MLRB81
- 83H00294-01 change 83H00233-01, 83H00294-03, 62H00065-B1M Sub-assy to 82H
maybe You need do the same...
Okay, so i just bought my 6th HD2, and this one got the lockscreen problem as well. If i lock the screen using the red power button and try to wake it up with the same red power button i found out that it doesn't work. I tried everything but i think i found a sort of workaround for the touchscreen problem.
1. Lock the screen as you normally do, with the red power button.
2. Wait at least more then 6 seconds with the screen off.
3. Now push the VOLUME UP button to make the device wake up.
4. Profit!
5. If it doesn't work, go back to 1 and try again.
I found out that if it works 1 time it will work multiple times in a row.
I'm on NAND but i think it works on SD aswell.
Please post your reactions to this.