Hi.
This morning i had a very strange experience with my Blackstone.
While i was copying something o the card i had to disconect the phone and then it started to act strange. It did not want to connect to the computer anymore,every tab in manila frezze up the phone,and the power button did not respond when i pushed it.The power button is working but not in WINDOWS, so it must not be a hardware problem i think.
The rom was Energyrom 23052 i think, and it was working great.
I did a hard reset but the same thing, no change.
Tried flashing again with a different rom Energyrom LEO 23081, but no change,manila freezes the phone and the power button is not working.
So i flashed a Duttys WM6.1 V4.3 ROM Final [MSVC Version], and everything is working normal, even the power button?
So anyone any clue of what is the problem?
Thank you.
thank you all for your help.
prolem solved!
I have this problem too. Have you found the solution?
sorry to hear that but best advise i can give u at the min is to goto the rom posting that u hav and explain ur problem there and if ur on energyrom repost it there and pm me with ur problem
Related
Hi all,
Big issues!! I upgraded my ROM to 4.20.?? and all appeared to be working fine but now when I press the on/off button the XDA turns off and I can't turn it back on except if I soft reset.
Also, I can't see to upgrade or downgrade the ROM. An error comes up saying the connection had been inaccessible.
Is there an easy way to downgrade the ROM. This problem all came about because the sound on my XDA kept dropping in and out!! Now there's no sound and a few OTHER issues!!
Any help would b greatly appreciated.... anything at all!!
Have you installed a "clean" ROM or with included applications?
Very often KSE Truefax causes this issue....
Stefan
What do you mean by 'clean ROM'?? As far as I'm a aware there weren't any extra applications (I did not cook the ROM in the kitchen if that's what you mean??)
I downloaded it from the FTP here & loaded it through the USB cradle.
Any ideas??
Ok. So you have a "clean ROM" when it is directly from the ftp.....
In the beginning it worked for you?
Have you installed any appliacations on it?
Stefan
Haven't installed any additional applications... the OS works fine... it's just that there's no sound and when I press the on/off it turns off altogether and I have to soft reset.
So no ideas then I take it?? :shock: :?: :?:
As the title says, I have an Elf & when you press the power button (which is meant to turn the screen on and off) it shuts the device off instantly.
I first tried doing a hard reset
Then I tried another rom, to see if it was to do with the OS
& then I tried two other roms.
Ive still got the same problem.
Thinking of taking it back to the place I got it.
Anyone got any thoughts on any solution before I take it back?
Im thinking its a hardware problem that I cant really solve.
which spl are you using? I had a similar prob when i upgraded my rom to 6.1, but aftr using 3.07 spl, problems were gone..
I was using 3.07, but it doesnt matter now.
I took it back to the shop (with all accessories etc) and they replaced it for me. I feel bad about hastling them.
I took them an Elf, but apparently they have given me a Elfin, but on their system, they both just come up as p3450
But it works! thats the main thing.
and its gold and shiny.
Maybe somebody know how to solve this problem without turn elf back to the shop?)
I have same problem but haven't a chance to turn it back) 3.07 spl also
I had exactly this problem before I knew I have an Elfin.
I flashed Elf Roms on my Elfin, that caused the problem.
It boots regularly, but it will do a soft reset every X
minutes. Then I flashed an Elfin Rom and everything
works fine ^^
Maybe I'm wrong, but i think its Elf. It has 64Ram & 128 Flash, or they may not correctly view after flash or i dont understand differences?
It boots regulary every X minutes because it goes to sleepeng mode if device is not using. If this option off, it will not boot by its own, only if i press power button(
Hello , I have this strange problem with my HD2. Whenever I hold down the shut down button and when the menu for choosing between Power off ; lock device etc. appears , when I select POWER OFF the phone doesn`t really POWER OFF it just restarts. I can`t get my phone to completely shut down without taking the battery off. And when I put the battery the phone automaticly starts without having to long press the shut down button.
Someone have that problem too ?
I`m using 1.48.479.1 ROM ... I don`t remember having this problem before, but I really haven`t switched off my phone completely, so I really don`t remember.
Please help !
Thank you in advanced !
Hard RESET didn`t fix the issue !!!
c0rp1 said:
Hello , I have this strange problem with my HD2. Whenever I hold down the shut down button and when the menu for choosing between Power off ; lock device etc. appears , when I select POWER OFF the phone doesn`t really POWER OFF it just restarts. I can`t get my phone to completely shut down without taking the battery off. And when I put the battery the phone automaticly starts without having to long press the shut down button.
Someone have that problem too ?
I`m using 1.48.479.1 ROM ... I don`t remember having this problem before, but I really haven`t switched off my phone completely, so I really don`t remember.
Please help !
Thank you in advanced !
Hard RESET didn`t fix the issue !!!
Click to expand...
Click to collapse
I just tried it on mine, and I can shut down with no problem.
To be honest, that sounds like a hardware issue, rather than a software issue. (The fact that a hard reset didn't change it makes me think that!)
Try to reflash 1.48 or flash the device to an older ROM (such as 1.43) and see what happens.
Fatherboard said:
Try to reflash 1.48 or flash the device to an older ROM (such as 1.43) and see what happens.
Click to expand...
Click to collapse
Good advice - particularly the 1.43 suggestion.
Tested it on ALL ROMs .... 1.43 ; 1.49 ; 1.61 TUR.
Same in all 3 ROMs ... the strangest thing it that when I shut it down for the first time , let`s say after Software update it powers off as normal. But after that I can`t get it powered off no mather what I do.
How can that be a HARDWARE ISSUE ?
Please help !!!
If someone really can help me, it would be wonderful...
Anybody ?
Try without installing any other software, without sdcard & without simcard.
skr_xd said:
Try without installing any other software, without sdcard & without simcard.
Click to expand...
Click to collapse
Thanks for the reply ... tried that but didn`t work .... any other suggestions ?
At least if someone knows if there is a registry for the power options in HD2, so I can change something and try if it will work ?
Sounds like something's stuck?
Perhaps you should call up HTC and invoke your warranty.
Bump !!! Sorry for keeping the thread alive, but I really am searching for help ! Hope you understand !
It's just faulty unit. This is not typical, as you might have noticed. Return it.
BUMP
c0rp1, it seems that you need to have your unit repaired/replaced. there's nothing you can do.
BUMP
Hi everyone, hope you can help me. I have flashed quite a few roms (nand) and all with the latest radio yet i have the same problem over and over again. Everything in the roms works,(well, except for the usual glitches) except that when i make a phone call the screen goes blank which is what i expect in call but it won't turn back on again after or if i have to use the dial pad.
Is it me doing something wrong??? Any help would be recieved with thanx
cheers....
edit.... the only way it seems i can recover is to either plug in a usb or pull the battery??
HELP!!
edit 2.. Just flashed wm6.5 back on to it and screen works as it should... flashed 2 different android nand roms and problem is back??
Does no one else have this issue?? i MUST be doing something wrong!
Hi,
i`ve got a problem with my touchscreen, after installing SD card distribution of Android, few restarts later my touchscreen stpped to respond every time when my device is locked, and i have to restart it.
I tried to flash new rom - nothing happend
H-E-L-P !
remove sd card delete the partitions and format - use Easeus free edition for this
Then boot the phone - reun task 29 from your pc then reread the flashing instructions for the rom of your choice and try again - ensure the rom supports your version og HD2 whatever that may be
All done, and doesn`t work. I`m wonderig if is possible, that is malfunction of touchscreen, because it have been changed after it was broken.
i'm having the same issue. after it goes into its first lock screen the touch screen input doesn't work. i've flashed the ROM and also task29 the sucker. i've reverted back to stock ROM too. I'm not running android or even try to install from SD.
Bump..!
Anybody got a solution for this..?
I have a HD2 with android on it.. nand version.. so it runs without sd card..
The phone works fine.. but when you lock it.. the screen doesnt respond anymore.. its running miui at the moment, so i can unlock the lockscreen.. but still the screen doesnt respond..
i see more people having this issues, so i hope to find a solution..
keep on searching..!
So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows
gomez.pl said:
So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows
Click to expand...
Click to collapse
Sure it's hardware: replacing touchscreen is your best choice!
But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..
thommy86 said:
But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..
Click to expand...
Click to collapse
It's a wellknown (hardware) problem for HD2, not related to software(android/wm/wp/whatever).
SO my LEO came back from service, there is a part list that they changed:
- 54h20178-00M pre-assy key, key FPC, UF-KS, w/o Reg
- 74H01549-00M Chassis Pre-assy, black, stainless steel, MLRB81
- 76H04078-00M tape, FPC connector, kapton, MLRB81
- 83H00294-01 change 83H00233-01, 83H00294-03, 62H00065-B1M Sub-assy to 82H
maybe You need do the same...
Okay, so i just bought my 6th HD2, and this one got the lockscreen problem as well. If i lock the screen using the red power button and try to wake it up with the same red power button i found out that it doesn't work. I tried everything but i think i found a sort of workaround for the touchscreen problem.
1. Lock the screen as you normally do, with the red power button.
2. Wait at least more then 6 seconds with the screen off.
3. Now push the VOLUME UP button to make the device wake up.
4. Profit!
5. If it doesn't work, go back to 1 and try again.
I found out that if it works 1 time it will work multiple times in a row.
I'm on NAND but i think it works on SD aswell.
Please post your reactions to this.